RESUMO
Vinyl pnictinidenes are an elusive family of molecules that have been suggested as key intermediates in multiple chemical reactions and commonly display a predisposition toward open-shell electronic ground states (as is evident from quantum chemical computations). However, owing to their expected extremely high reactivity, no vinyl pnictinidene has ever been isolated and characterized spectroscopically. Here, we report the synthesis and spectroscopic characterization of vinylarsinidene, a higher congener of vinylnitrene. As we demonstrate, triplet vinylarsinidene can be prepared through the low-temperature photolysis of diazidovinylarsine at 10 K in an argon matrix. The title compound can also be generated through high-vacuum flash pyrolysis of the diazide at 700 °C and trapped analogously. Triplet vinylarsinidene was characterized by IR and UV/vis spectroscopy and displayed remarkably rich unimolecular photochemistry. Upon selective photoirradiation, it rearranges to vinylidenearsine, 2H-arsirene, triplet ethynylarsinidene or an arsinidene (H-As) acetylene complex. The formation mechanisms of these products were rationalized with DFT and CASPT2 computations.
RESUMO
Catalysis plays a pivotal role in both chemistry and biology, primarily attributed to its ability to stabilize transition states and lower activation free energies, thereby accelerating reaction rates. While computational studies have contributed valuable mechanistic insights, there remains a scarcity of experimental investigations into transition states. In this work, we embark on an experimental exploration of the catalytic energy lowering associated with transition states in the photorearrangement of the phenylperoxy radical-water complex to the oxepin-2(5H)-one-5-yl radical. Employing matrix isolation spectroscopy, density functional theory, and post-HF computations, we scrutinize the (photo)catalytic impact of a single water molecule on the rearrangement. Our computations indicate that the barrier heights for the water-assisted unimolecular isomerization steps are approximately 2-3 kcal mol-1 lower compared to the uncatalyzed steps. This decrease directly coincides with the energy difference in the required wavelength during the transformation (Δλ = λ546 nm - λ579 nm ≡ 52.4-49.4 = 3.0 kcal mol-1), allowing us to elucidate the differential transition state energy in the photochemical rearrangement of the phenylperoxy radical catalyzed by a single water molecule. Our work highlights the important role of water catalysis and has, among others, implications for understanding the mechanism of organic reactions under atmospheric conditions.
RESUMO
Carbenes and nitrenes are key intermediates involved in numerous chemical processes, and they have attracted considerable attention in synthetic chemistry, biochemistry, and materials science. Even though parent arsinidene (H-As) has been characterized well, the high reactivity of subsituted arsinidenes has prohibited their isolation and characterization to date. Here, we report the preparation of triplet phenylarsinidene through the photolysis of phenylarsenic diazide isolated in an argon matrix and its subsequent characterization by infrared and UV/vis spectroscopy. Doping matrices containing phenylarsinidene with molecular oxygen leads to the formation of hitherto unknown anti-dioxyphenylarsine. The latter undergoes isomerization to novel dioxophenylarsine upon 465 nm irradiation. The assignments were validated by isotope-labeling experiments and agree very well with B3LYP/def2-TZVP computations.
RESUMO
The interstellar candidate phosphorus mononitride PN, a metastable species, was generated through high-vacuum flash pyrolysis of (o-phenyldioxyl)phosphinoazide in cryogenic matrices. Although the PN stretching band was not directly detected because of its low infrared intensity and possible overlaps with other strong bands, o-benzoquinone, carbon monoxide, and cyclopentadienone as additional fragmentation products were clearly identified. Moreover, an elusive o-benzoquinone-PN complex formed when (o-phenyldioxyl)phosphinoazide was exposed to UV irradiation at λ=254â nm. Its recombination to (o-phenyldioxyl)-λ5 -phosphinonitrile was observed upon irradiation with the light at λ=523â nm, which demonstrates for the first time the reactivity of PN towards an organic molecule. Energy profile computations at the B3LYP/def2-TZVP density functional theory level reveal a concerted mechanism. To provide further evidence, UV/Vis spectra of the precursor and the irradiation products were recorded and agree well with time-dependent DFT computations.
RESUMO
On-surface synthesis is at the verge of emerging as the method of choice for the generation and visualization of unstable or unconventional molecules, which could not be obtained via traditional synthetic methods. A case in point is the on-surface synthesis of the structurally elusive cyclotriphosphazene (P3 N3 ), an inorganic aromatic analogue of benzene. Here, we report the preparation of this fleetingly existing species on Cu(111) and Au(111) surfaces at 5.2â K through molecular manipulation with unprecedented precision, i.e., voltage pulse-induced sextuple dechlorination of an ultra-small (about 6â Å) hexachlorophosphazene P3 N3 Cl6 precursor by the tip of a scanning probe microscope. Real-space atomic-level imaging of cyclotriphosphazene reveals its planar D3h -symmetric ring structure. Furthermore, this demasking strategy has been expanded to generate cyclotriphosphazene from a hexaazide precursor P3 N21 via a different stimulation method (photolysis) for complementary measurements by matrix isolation infrared and ultraviolet spectroscopy.
RESUMO
Vinyltelluryl radical was prepared by high-vacuum flash pyrolysis from the corresponding divinylditelluride and trapped in an argon matrix at 10 K. The title compound was characterized by IR and UV/Vis spectroscopy, and all experimental data match well with density functional theory at the UB3LYP/def2-QZVPP level. According to UB3LYP/def2-QZVPP computations, the spin density is mainly localized on the Te atom. The vinylogy principle for the vinyltelluryl radical is not applicable due to the lack of delocalization of spin density. Upon irradiation of the matrix with light (λ = 365 nm), the vinyltelluryl radical rearranges to a H-TeËâ¯acetylene complex. Doping the matrix with molecular oxygen leads to the hitherto unknown vinyltelluro peroxy radical. The latter isomerizes to the more thermodynamically stable vinyltelluroyl radical by irradiation with light at λ = 523 nm.
RESUMO
As low-temperature conditions (e.g. in space) prohibit reactions requiring large activation energies, an alternative mechanism for follow-up transformations of highly stable molecules involves the reactions of higher energy isomers that were generated in a different environment. Hence, one working model for the formation of larger organic molecules is their generation from high-lying isomers of otherwise rather stable molecules. As an example, we present here the synthesis as well as IR and UV/Vis spectroscopic identification of the previously elusive 1,1,2-ethenetriol, the higher energy enol tautomer of glycolic acid, a rather stable and hence unreactive biological building block. The title compound was generated in the gas phase by flash vacuum pyrolysis of tartronic acid at 400 °C and was subsequently trapped in argon matrices at 10â K. The spectral assignments are supported by B3LYP/6-311++G(2d,2p) computations. Upon photolysis at λ=180-254â nm, 1,1,2-ethenetriol rearranges to glycolic acid and ketene.
RESUMO
The structures and reactivities of organic phosphinidene chalcogenides have been mainly inferred from trapping or complexation experiments. Phosphinidene chalcogenide derivatives appear to be an elusive family of molecules that have been suggested as reactive intermediates in multiple organophosphorus reactions. The quest to isolate "free" phosphinidene chalcogenides remains a challenge in the field. Here, we present the synthesis, IR, and UV/Vis spectroscopic identification of hitherto elusive phenylphosphinidene oxide and phenylphosphinidene sulfide from the corresponding phosphonic diazide precursors. We isolated these higher congeners of nitroso- and thionitrosobenzene in argon matrices at 10â K. The spectral assignments are supported by B3LYP/6-311++G(3df,3pd) and MP2/cc-pVTZ computations.
RESUMO
We present the first spectroscopic identification of hitherto unknown 1,1-ethenediol, the enol tautomer of acetic acid. The title compound was generated in the gas phase through flash vacuum pyrolysis of malonic acid at 400 °C. The pyrolysis products were subsequently trapped in argon matrices at 10â K and characterized spectroscopically by means of IR and UV/Vis spectroscopy together with matching its spectral data with computations at the CCSD(T)/cc-pCVTZ and B3LYP/6-311++G(2d,2p) levels of theory. Upon photolysis at λ=254â nm, the enol rearranges to acetic acid and ketene.
RESUMO
S-Nitrosothiols (RSNO) are exogenous and endogenous sources of nitric oxide in biological systems due to facile homolytic cleavage of the S-N bonds. By following the photolytic decomposition of prototypical RSNO (R = Me and Et) in Ne, Ar, and N2 matrixes (<10 K), elusive caged radical pairs consisting of nitric oxide (NOâ¢) and thiyl radicals (RSâ¢), bridged by O···S and H···N connections, were identified with IR and UV/vis spectroscopy. Upon red-light irradiation, both caged radical pairs (RS⢷··â¢ON) vanish and reform RSNO. According to the calculation at the CASPT2(10,8)/cc-pVDZ level (298.15 K), the dissociation energy of MeS⢷··â¢ON amounts to 4.7 kcal mol-1.
RESUMO
The large number and amounts of volatile organosulfur compounds emitted to the atmosphere and the enormous variety of their reactions in various oxidation states make experimental measurements of even a small fraction of them a daunting task. Dimethyl sulfide (DMS) is a product of biological processes involving marine phytoplankton, and it is estimated to account for approximately 60% of the total natural sulfur gases released to the atmosphere. Ocean-emitted DMS has been suggested to play a role in atmospheric aerosol formation and thereby cloud formation. The reaction of ·OH with DMS is known to proceed by two independent channels: abstraction and addition. The oxidation of DMS is believed to be initiated by the reaction with ·OH and NO3· radicals, which eventually leads to the formation of sulfuric acid (H2SO4) and methanesulfonic acid (CH3SO3H). The reaction of DMS with NO3· appears to proceed exclusively by hydrogen abstraction. The oxidation of DMS consists of a complex sequence of reactions. Depending on the time of the day or altitude, it may take a variety of pathways. In general, however, the oxidation proceeds via chains of radical reactions. Dimethyl sulfoxide (DMSO) has been reported to be a major product of the addition channel. Dimethyl sulfone (DMSO2), SO2, CH3SO3H, and methanesulfinic acid (CH3S(O)OH) have been observed as products of further oxidation of DMSO. Understanding the details of DMS oxidation requires in-depth knowledge of the elementary steps of this seemingly simple transformation, which in turn requires a combination of experimental and theoretical methods. The methylthiyl (CH3S·), methylsulfinyl (CH3SO·), methylsulfonyl (CH3SO2·), and methylsulfonyloxyl (CH3SO3·) radicals have been postulated as intermediates in the oxidation of DMS. Therefore, studying the chemistry of sulfur-containing free radicals in the laboratory also is the basis for understanding the mechanism of DMS oxidation in the atmosphere. The application of matrix-isolation techniques in combination with quantum-mechanical calculations on the generation and structural elucidation of CH3SOx (x = 0-3) radicals is reviewed in the present Account. Experimental matrix IR and UV/vis data for all known species of this substance class are summarized together with data obtained using other spectroscopic techniques, including time-resolved spectroscopy, electron paramagnetic resonance spectroscopy, and others. We also discuss the reactivity and experimental characterization of these species to illustrate their practical relevance and highlight spectroscopic techniques available for the elucidation of their geometric and electronic structures. The present Account summarizes recent results regarding the preparation, characterization, and reactivity of various radical species with the formula CH3SOx (x = 0-3).
RESUMO
The phenyltelluryl radical was prepared by high-vacuum flash pyrolysis of diphenyl ditelluride and was chacracterized by matrix isolation IR and UV/Vis spectroscopy. After doping the matrix with molecular oxygen and allowing bimolecular reactions, the hitherto unkown phenyltelluro peroxy radical formed and was identified via IR spectroscopy. Irradiation with light at λ = 436 nm leads to isomerization to the thermodynamically more stable novel phenyltelluroyl radical. All experimental findings agree well with density functional theory (UB3LYP/Def2QZVPP and UM06-2X/Def2QZVPP) computations.
RESUMO
We report the first preparation, matrix-isolation, and IR and UV/vis spectroscopic characterization of the thiuram radical that is a highly important species for many industrial processes. The thiuram radical was prepared by thermal dissociation of tetramethylthiuram disulfide and was identified by matching its spectroscopic data with density functional theory [UB3LYP/6-311++G(3df,3pd)] computations. The title compound proved to be highly photolabile, and irradiation with light at λ = 623 nm affords a hitherto unknown carbamodithioic acid, N-(methyl)- N-methyl radical, as characterized by IR and UV/vis spectroscopy in low-temperature matrices.
RESUMO
Triplet phenylphosphinidene was prepared by light-induced elimination of ethylene from the corresponding phenylphosphirane and was characterized by IR and UV/vis spectroscopy together with matching of its spectral data with density functional theory computations. The photolysis of phenylphosphirane in 3P-O2 doped matrices enabled the spectroscopic identification of a hitherto unknown phenyldioxophosphorane, the long elusive phosphorus analogue of nitrobenzene.
RESUMO
Contrary to C-H chlorination and bromination, the direct iodination of alkanes represents a great challenge. We reveal a new N-iodoamide that is capable of a direct and efficient C-H bond iodination of various cyclic and acyclic alkanes providing iodoalkanes in good yields. This is the first use of N-iodoamide for C-H bond iodination. The method also works well for benzylic C-H bonds, thereby constituting the missing version of the Wohl-Ziegler iodination reaction. Mechanistic details were elucidated by DFT computations, and the N-centered radical derived from the used N-iodoamide, which is the key intermediate in this process, was matrix-isolated in a solid argon matrix and characterized by UV-vis as well as IR spectroscopy.
RESUMO
The current study focuses on the generation, identification, and characterization of the phenylselenyl radical using the matrix isolation technique in combination with density functional theory (B3LYP/cc-pVTZ) computations. The hitherto unknown phenylselenyl peroxy radical was synthesized by co-condensation of the phenylselenyl radical with molecular ground state triplet oxygen from the gas phase and subsequent trapping in argon matrices at 10 K. The experimental IR spectra including 18O isotopically labelled materials compare well with the data obtained from B3LYP/cc-pVTZ computations. Upon 312 nm irradiation, the phenylselenyl peroxy radical isomerizes to the thermodynamically more stable equally novel phenylselenoyl radical.
RESUMO
The phenylthiyl radical (1) was prepared in the gas phase by vacuum flash pyrolysis of allylphenyl sulfide or diphenyl sulfide and isolated in an argon matrix. The hitherto unknown phenylthiyl peroxy radical was synthesized by co-condensation of 1 with molecular oxygen. Irradiation with light of λ = 465 nm led to a rearrangement to the novel phenylsulfonyl radical.
RESUMO
Gold nanoparticles (AuNPs) are subjects of broad interest in scientific community due to their promising physicochemical properties. Herein we report the facile and controlled light-mediated preparation of gold nanoparticles through a Norrish typeâ I reaction of photoactive polymers. These carefully designed polymers act as reagents for the photochemical reduction of gold ions, as well as stabilizers for the in situ generated AuNPs. Manipulating the length and composition of the photoactive polymers allows for control of AuNP size. Nanoparticle diameter can be controlled from 1.5â nm to 9.6â nm.
Assuntos
Ouro/química , Luz , Nanopartículas Metálicas/química , Polímeros/química , Nanopartículas Metálicas/ultraestrutura , Nanotecnologia/métodos , Oxirredução , Tamanho da PartículaRESUMO
Bioorthogonal ligation methods are the focus of current research due to their versatile applications in biotechnology and materials science for post-functionalization and immobilization of biomolecules. Recently, inverse electron demand Diels-Alder (iEDDA) reactions employing 1,2,4,5-tetrazines as electron deficient dienes emerged as powerful tools in this field. We adapted iEDDA in microcontact chemistry (µCC) in order to create enhanced surface functions. µCC is a straightforward soft-lithography technique which enables fast and large area patterning with high pattern resolutions. In this work, tetrazine functionalized surfaces were reacted with carbohydrates conjugated with norbornene or cyclooctyne acting as strained electron rich dienophiles employing µCC. It was possible to create monofunctional as well as bifunctional substrates which were specifically addressable by proteins. Furthermore we structured glass supported alkene terminated self-assembled monolayers with a tetrazine conjugated atom transfer radical polymerization (ATRP) initiator enabling surface grafted polymerizations of poly(methylacrylate) brushes. The success of the surface initiated iEDDA via µCC as well as the functionalization with natural and synthetic polymers was verified via fluorescence and optical microscopy, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), atomic force microscopy (AFM) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Assuntos
Produtos Biológicos/química , Reação de Cicloadição , Elétrons , Polímeros/química , Alcenos/química , Manose/química , Polimerização , Polímeros/síntese química , Impressão , Propriedades de SuperfícieRESUMO
We present the gas-phase synthesis of 2-methyl-prop-1-ene-1,1-diol, an unreported higher energy tautomer of isobutyric acid. The enol was captured in an argon matrix at 3.5 K, characterized spectroscopically and by DFT computations. The enol rearranges likely photochemically to isobutyric acid and dimethylketene. We also identified propene, likely photochemically formed from dimethylketene.