RESUMO
We report on a novel, to the best of our knowledge, active probe for scanning near-field optical microscopy (SNOM). A fluorescent nanosphere, acting as the secondary source, is grafted in an electrostatic manner at the apex of a polymer tip integrated into the extremity of an optical fiber. Thanks to the high photostability and sensitivity of the secondary source, the near-field interaction with a gold nanocube is investigated. It is shown that the spatial resolution is well defined by the size of the fluorescent nanosphere. The polarization-dependent near-field images, which are consistent with the simulation, are ascribed to the local excitation rate enhancement. Meanwhile, measurement of the distance-dependent fluorescence lifetime of the nanosphere provides strong evidence that the local density of states is modified so that extra information on nano-emitters can be extracted during near-field scanning. This advanced active probe can thus potentially broaden the range of applications to include nanoscale thermal imaging, biochemical sensors, and the manipulation of nanoparticles.
RESUMO
We evaluate experimentally and theoretically the role of the residual ligands and ambient environment refractive index in the optical response of a single spherical gold nanoparticle on a substrate and demonstrate the changes in the near- and far-field properties of its hybridized modes in the presence of the cetyltrimethylammonium bromide (CTAB) layer. Particularly, we show that the conventional bilayer scheme for CTAB is not relevant for colloidal nanoparticles deposited on a substrate. We show that this CTAB layer considerably changes the amplitude and localization of the confinement of the electric field, which is of prime importance in the design of plasmonic complex systems coupled to emitters. Moreover, we numerically study the influence of the CTAB layer on the modification of sensitivity of plasmonic resonances of a gold nanopshere to local refractive index changes.
RESUMO
Two-photon luminescence (TPL) turn-off in small single gold nanorods (GNRs) exposed to increased resonant femtosecond laser excitation (800 nm wavelength, pulse energy density varying from 125 µJ cm-2 to 2.5 mJ cm-2) is investigated. The origin is shown to be a photo-induced decrease of the rod aspect ratio. This aspect ratio reduction could reasonably be assigned to gold atom diffusion away from the rod tips, where hot spots are localized. The two-photon luminescence signal can be recovered after a blue-shift of the incident excitation wavelength. No change in the excitation wavelength results in an out of resonance excitation of the rods and thus a reduced absorption, acting as feedback to stabilize the GNR shape and size. A theoretical analysis is presented evidencing limited thermal effects in the femtosecond regime for small nanoparticles, in good agreement with complementary topographic characterizations using scanning electron microscopy (SEM) and atomic force microscopy (AFM). We show finally that TPL reveals itself as a highly sensitive tool to follow tiny changes resulting from the photo-induced reshaping of GNRs.
RESUMO
We report on the angular distribution, polarization, and spectrum of the light emitted from an electrically controlled nanoscale light source. This nanosource of light arises from the local, low-energy, electrical excitation of localized surface plasmons (LSP) on individual gold nanoparticles using a scanning tunneling microscope (STM). The gold nanoparticles (NP) are chemically synthesized truncated bitetrahedrons. The emitted light is collected through the transparent substrate and the emission characteristics (angular distribution, polarization, and spectrum) are analyzed. These three observables are found to strongly depend on the lateral position of the STM tip with respect to the triangular upper face of the gold NP. In particular, the resulting light emission changes orientation when the electrical excitation via the STM tip is moved from the base to the vertex of the triangular face. On the basis of the comparison of the experimental observations with an analytical dipole model and finite-difference time-domain (FDTD) calculations, we show that this behavior is linked to the selective excitation of the out-of-plane and in-plane dipolar LSP modes of the NP. This selective excitation is achieved through the lateral position of the tip with respect to the symmetry center of the NP.
RESUMO
The thermal dynamics and transient optical response of individual gold nanodisks supported on thin silicon nitride membranes were investigated using optical time-resolved pump-probe spectroscopy and finite-element modeling. The effect of reducing the membrane thickness from 50 nm to 15 nm on the nanodisk thermal dynamics was explored. A significant deceleration of the nanodisk cooling kinetics was observed, and linked to a quasi-two-dimensional heat diffusion process within the 15 nm thick membrane, without detectable modification of its thermal conductivity. Systematic measurements involving different optical probe wavelengths additionally revealed the contribution of indirect membrane heating to the measured time-resolved signals, an effect particularly pronounced in the spectral range where direct optical heating of the nanodisk induces minimal ultrafast modifications of its extinction cross-section.
RESUMO
The cooling dynamics of individual gold nanodisks synthesized using colloidal chemistry and deposited on solid substrates with different compositions and thicknesses were investigated using optical time-resolved spectroscopy and finite-element modeling. Experiments demonstrate a strong substrate-dependence of these cooling dynamics, which require the combination of heat transfer at the nanodisk/substrate interface and heat diffusion in the substrate. In the case of nanodisks deposited on a thick sapphire substrate, the dynamics are found to be mostly limited by the thermal resistance of the gold/sapphire interface, for which a value similar to that obtained in the context of previous experiments on sapphire-supported single gold nanodisks produced by electron beam lithography is deduced. In contrast, the cooling dynamics of nanodisks supported by nanometric silica and silicon nitride membranes are much slower and largely affected by heat diffusion in the membranes, whose efficiency is strongly reduced as compared to the thick sapphire case.
RESUMO
The study described in this paper was conducted in the framework of the European nPSize project (EMPIR program) with the main objective of proposing new reference certified nanomaterials for the market in order to improve the reliability and traceability of nanoparticle size measurements. For this purpose, bimodal populations as well as complexly shaped nanoparticles (bipyramids, cubes, and rods) were synthesized. An inter-laboratory comparison was organized for comparing the size measurements of the selected nanoparticle samples performed with electron microscopy (TEM, SEM, and TSEM), scanning probe microscopy (AFM), or small-angle X-ray scattering (SAXS). The results demonstrate good consistency of the measured size by the different techniques in cases where special care was taken for sample preparation, instrument calibration, and the clear definition of the measurand. For each characterization method, the calibration process is described and a semi-quantitative table grouping the main error sources is proposed for estimating the uncertainties associated with the measurements. Regarding microscopy-based techniques applied to complexly shaped nanoparticles, data dispersion can be observed when the size measurements are affected by the orientation of the nanoparticles on the substrate. For the most complex materials, hybrid approaches combining several complementary techniques were tested, with the outcome being that the reliability of the size results was improved.
RESUMO
Absorption of ultraviolet light by DNA is known to lead to carcinogenic mutations, but the processes between photon absorption and the photochemical reactions are poorly understood. In their study of the excited-stated dynamics of model DNA helices using femtosecond transient absorption spectroscopy, Crespo-Hernández et al. observe that the picosecond component of the transient signals recorded for the adenine-thymine oligonucleotide (dA)18.(dT)18 is close to that for (dA)18, but quite different from that for (dAdT)9.(dAdT)9; from this observation, they conclude that excimer formation limits excitation energy to one strand at a time. Here we use time-resolved fluorescence spectroscopy to probe the excited-state dynamics, which reveals the complexity of these systems and indicates that the interpretation of Crespo-Hernández et al. is an oversimplification. We also comment on the pertinence of separating base stacking and base pairing in excited-state dynamics of double helices and question the authors' assignment of the long-lived signal component found for (dA)18.(dT)18 to adenine excimers.
Assuntos
DNA/química , DNA/metabolismo , Adenina/química , Adenina/metabolismo , Pareamento de Bases , Fluorescência , Cinética , Oligodesoxirribonucleotídeos/química , Oligodesoxirribonucleotídeos/metabolismo , Fótons , Espectrometria de Fluorescência , Timina/química , Timina/metabolismoRESUMO
Gold nanoparticles can produce reactive oxygen species (ROS) under the action of ultrashort pulsed light. While beneficial for photodynamic therapy, this phenomenon is prohibitive for other biomedical applications such as imaging, photo-thermal drug release, or targeted gene delivery. Here, ROS are produced in water by irradiating gold nanorods and silica-coated gold nanorods with near-infrared femtosecond laser pulses and are detected using two fluorescent probes. Our results demonstrate that a dense silica shell around gold nanorods inhibits the formation of singlet oxygen (1O2) and hydroxyl radical (ËOH) efficiently. The silica coating prevents the Dexter energy transfer between the nanoparticles and 3O2, stopping thus the generation of 1O2. In addition, numerical simulations accounting for the use of ultrashort laser pulses show that the plasmonic field enhancement at the nanoparticle vicinity is lessened once adding the silica layer. With the multiphotonic ejection of electrons being also blocked, all the possible pathways for ROS production are hindered by adding the silica shell around gold nanorods, making them safer for a range of biomedical developments.
Assuntos
Materiais Revestidos Biocompatíveis/farmacologia , Ouro/farmacologia , Nanotubos/química , Fármacos Fotossensibilizantes/farmacologia , Espécies Reativas de Oxigênio/metabolismo , Dióxido de Silício/farmacologia , Materiais Revestidos Biocompatíveis/síntese química , Materiais Revestidos Biocompatíveis/química , Ouro/química , Humanos , Lasers , Teste de Materiais , Fármacos Fotossensibilizantes/síntese química , Fármacos Fotossensibilizantes/química , Dióxido de Silício/químicaRESUMO
A versatile software package in the form of a Python extension, named CDEF (computing Debye's scattering formula for extraordinary form factors), is proposed to calculate approximate scattering profiles of arbitrarily shaped nanoparticles for small-angle X-ray scattering (SAXS). CDEF generates a quasi-randomly distributed point cloud in the desired particle shape and then applies the open-source software DEBYER for efficient evaluation of Debye's scattering formula to calculate the SAXS pattern (https://github.com/j-from-b/CDEF). If self-correlation of the scattering signal is not omitted, the quasi-random distribution provides faster convergence compared with a true-random distribution of the scatterers, especially at higher momentum transfer. The usage of the software is demonstrated for the evaluation of scattering data of Au nanocubes with rounded edges, which were measured at the four-crystal monochromator beamline of PTB at the synchrotron radiation facility BESSY II in Berlin. The implementation is fast enough to run on a single desktop computer and perform model fits within minutes. The accuracy of the method was analyzed by comparison with analytically known form factors and verified with another implementation, the SPONGE, based on a similar principle with fewer approximations. Additionally, the SPONGE coupled to McSAS3 allows one to retrieve information on the uncertainty of the size distribution using a Monte Carlo uncertainty estimation algorithm.
RESUMO
The integration of nanoparticles (NPs) into photonic devices and plasmonic sensors requires selective patterning of these NPs with fine control of their size, shape, and spatial positioning. In this article, we report on a general strategy to pattern different types of NPs. This strategy involves the functionalization of photopolymers before their patterning by two-photon laser writing to fabricate micro- and nanostructures that selectively attract colloidal NPs with suitable ligands, allowing their precise immobilization and organization even within complex 3D structures. Monolayers of NPs without aggregations are obtained and the surface density of NPs on the polymer surface can be controlled by changing either the time of immersion in the colloidal solution or the type of amine molecule chemically grafted on the polymer surface. Different types of NPs (gold, silver, polystyrene, iron oxide, colloidal quantum dots, and nanodiamonds) of different sizes are introduced showing a potential toward nanophotonic applications. To validate the great potential of our method, we successfully demonstrate the integration of quantum dots within a gold nanocube with high spatial resolution and nanometer precision. The promise of this hybrid nanosource of light (plasmonic/polymer/QDs) as optical nanoswitch is illustrated through photoluminescence measurements under polarized exciting light.
RESUMO
Hybrid plasmonic nano-emitters based on the combination of quantum dot emitters (QD) and plasmonic nanoantennas open up new perspectives in the control of light. However, precise positioning of any active medium at the nanoscale constitutes a challenge. Here, we report on the optimal overlap of antenna's near-field and active medium whose spatial distribution is controlled via a plasmon-triggered 2-photon polymerization of a photosensitive formulation containing QDs. Au nanoparticles of various geometries are considered. The response of these hybrid nano-emitters is shown to be highly sensitive to the light polarization. Different light emission states are evidenced by photoluminescence measurements. These states correspond to polarization-sensitive nanoscale overlap between the exciting local field and the active medium distribution. The decrease of the QD concentration within the monomer formulation allows trapping of a single quantum dot in the vicinity of the Au particle. The latter objects show polarization-dependent switching in the single-photon regime.
RESUMO
The ionization of the DNA single and double helices (dA)20, (dT)20, (dAdT)10(dAdT)10 and (dA)20(dT)20, induced by nanosecond pulses at 266 nm, is studied by time-resolved absorption spectroscopy. The variation of the hydrated electron concentration with the absorbed laser intensity shows that, in addition to two-photon ionization, one-photon ionization takes place for (dAdT)10(dAdT)10, (dA)20(dT)20 and (dA)20 but not for (dT)20. The spectra of all adenine-containing oligomers at the microsecond time-scale correspond to the adenine deprotonated radical formed in concentrations comparable to that of the hydrated electron. The quantum yield for one-photon ionization of the oligomers (ca. 10(-3)) is higher by at least 1 order of magnitude than that of dAMP, showing clearly that organization of the bases in single and double helices leads to an important lowering of the ionization potential. The propensity of (dAdT)10(dAdT)10, containing alternating adenine-thymine sequences, to undergo one-photon ionization is lower than that of (dA)20(dT)20 and (dA)20, containing adenine runs. Pairing of the (dA)20 with the complementary strand leads to a decrease of quantum yield for one photon ionization by about a factor of 2.
Assuntos
DNA/química , Íons , Lasers , Fotoquímica , FótonsRESUMO
Homodimers of noble metal nanocubes form model plasmonic systems where the localized plasmon resonances sustained by each particle not only hybridize but also coexist with excitations of a different nature: surface plasmon polaritons confined within the Fabry-Perot cavity delimited by facing cube surfaces (i.e., gap plasmons). Destructive interference in the strong coupling between one of these highly localized modes and the highly radiating longitudinal dipolar plasmon of the dimer is responsible for the formation of a Fano resonance profile and the opening of a spectral window of anomalous transparency for the exciting light. We report on the clear experimental evidence of this effect in the case of 50 nm silver and 160 nm gold nanocube dimers studied by spatial modulation spectroscopy at the single particle level. A numerical study based on a plasmon mode analysis leads us to unambiguously identify the main cavity mode involved in this process and especially the major role played by its symmetry. The Fano depletion dip is red-shifted when the gap size is decreasing. It is also blue-shifted and all the more pronounced that the cube edge rounding is large. Combining nanopatch antenna and plasmon hybridization descriptions, we quantify the key role of the face-to-face distance and the cube edge morphology on the spectral profile of the transparency dip.
RESUMO
We report a near-field imaging study of colloidal gold nanocubes. This is accomplished through a photochemical imaging method in which molecular displacements are vectorial in nature, enabling sensitivity to the polarization of the optical near-field of the nanocubes. We analyze the confinement of both electromagnetic hot and "cold" spots with a resolution of λ/35 and emphasize the particularly high spatial confinement of cold spots. The concept of a cold spot complements the well-known electromagnetic hot spot but can have significant advantages. The application of the ultraconfined cold spots to high resolution imaging and spectroscopy is discussed.
Assuntos
Fenômenos Eletromagnéticos , Ouro/química , Nanoestruturas/química , Processos Fotoquímicos , Fatores de TempoRESUMO
The formation of thymine dimers in the single-stranded oligonucleotide, (dT)20, is studied at room temperature by laser flash photolysis using 266 nm excitation. It is shown that the (6-4) adduct is formed within 4 ms via a reactive intermediate. The formation of cyclobutane dimers is faster than 200 ns. The overall quantum yield for the (6-4) formation is (3.7 +/- 0.3) x 10-3, and that of the cyclobutane dimers is (2.8 +/- 0.2) x 10-2. No triplet absorption is detected, showing that either the intersystem crossing yield decreases by 1 order of magnitude upon oligomerization (<1.4 x 10-3) or the triplet state reacts with unit efficiency in less than 200 ns to yield cyclobutane dimers.
Assuntos
Dímeros de Pirimidina/química , Dímeros de Pirimidina/efeitos da radiação , Timidina Monofosfato/química , Timidina Monofosfato/efeitos da radiação , Fotólise , Poli T/química , Poli T/efeitos da radiação , Dímeros de Pirimidina/metabolismo , Timidina Monofosfato/metabolismoRESUMO
Cytosine methylation, which determines the hot spots for DNA photo-damage, is shown to induce a red-shift of the nucleoside absorption spectrum, making the chromophore more vulnerable to solar radiation, and a tenfold increase of the fluorescence lifetime, making excited statereactions more probable. A femtosecond investigation of the excited state deactivation reveals a quite complex mechanism.