RESUMO
Two series of metallo-(Zn(II), Mg(II), and Ru(II)) and free-base phthalocyanines (Pcs) with a carboxyl anchoring group and well-established bulky peripheral substituents (either tert-butyl or bulky 2,6-diisopropylphenoxy) were synthesized and tested as sensitizers in dye-sensitized solar cells (DSSCs). The trend of photovoltaic efficiencies (PCEs) for free-base and metallo Pcs followed the order Zn(II)Pc>Mg(II)Pcâ«H2Pc ≈ Ru(II)Pc regardless of the peripheral substitution. Higher efficiencies (4.95 versus 3.63 for the Zn(II) derivatives) were achieved with Pcs bearing the bulkier 2,6-diisopropylphenoxy group, indicating a lower aggregation and more suitable HOMO-LUMO levels. Furthermore, these derivatives showed a morelevant influence of the metal on the PCE values (from the highest 4.95 for the Zn(II)Pc to the lowest 0.23 for the Ru(II)Pc. In both series, the best PCEs observed with the Zn(II) derivatives were mainly due to their highest Jsc values. The lowest efficiencies found for the free-bases and Ru(II) derivatives were attributed to a mismatch between their LUMO levels and the conduction band of the TiO2,and lower light-harvesting capabilities, respectively. In conclusion, Zn(II) derivatives are still the best Pc candidates to use as sensitizers in molecular photovoltaics.
RESUMO
Half a century after the synthesis of the first subporphyrinoid, the study of tripyrrole and trisoindole porphyrin analogues constitutes a fervent and rapidly expanding research area. The outstanding structural, electronic and optical features of these cone-shaped aromatic macrocycles render them attractive candidates for a wide variety of applications, ranging from optoelectronics to biomedicine. To tune their properties and exploit their functionalities, the development of novel methodologies for the synthesis and post-functionalization of these contracted porphyrinoids, as well as a deep understanding of their supramolecular organization and their implementation into multicomponent systems of increasing complexity are of paramount importance. Herein, a review of the most recent advances in the fundamentals and applications of subporphyrinoids is presented, which comprehensively cover the last decade of discoveries. The final aim is to highlight the chemical versatility and intriguing physicochemical features of subporphyrinoids, while providing an updated overview of their most promising applications.
Assuntos
Porfirinas , Porfirinas/químicaRESUMO
Large π-conjugated systems are key in the area of molecular materials. Herein, we prepare via AuI -catalyzed cyclization a series of fully π-conjugated anthracene-fused oligo-BODIPYs. Their structural and optoelectronic properties were studied by several techniques, ranging from X-ray, UV/Vis, and cyclic voltammetry to transient absorption spectroscopy. As a complement, their electronic structures were explored by means of Density Functional Theory (DFT) calculations. Depending on the size and shape of the π-conjugated skeleton, unique features-such as face-to-face supramolecular organization, NIR absorption and fluorescence as well as strong electron accepting character-were noted. All in all, the aforementioned features render them valuable for technological applications.
RESUMO
A series of peripherally dicyano-, tricyano-, and tetracyano-substituted subphthalocyanines (SubPcs) have been prepared through microwave-assisted, palladium-mediated cyanation of iodinated precursors. The introduction of π-accepting cyano groups in the macrocycle clearly influences its electronic and redox properties, which are dependent on the number and relative position of these substituents. Additional functionalization of the periphery of SubPcs with electron-donating or -withdrawing groups allows for a further fine-tuning of their features, leading to intensely absorbing, strongly electron-accepting panchromatic dyes with low-lying LUMO energy levels. Flash-photolysis time-resolved microwave conductivity measurements on vapor-deposited films demonstrate that some of these novel SubPc derivatives display remarkable intrinsic charge-carrier mobilities that are comparable to or larger than those of other known well-performing acceptor SubPcs; thus confirming their potential as n-type organic semiconductors for application in the fabrication of photovoltaic devices.
RESUMO
Four hexachlorosubphthalocyanines SubPcCl6 -X bearing different axial substituents (X) have been synthesized for use as novel electron acceptors in solution-processed bulk-heterojunction organic solar cells. Subphthalocyanines are aromatic chromophoric molecules with cone-shaped structure, good solution processability, intense optical absorption in the visible spectral region, appropriate electron mobilities, and tunable energy levels. Solar cells with subphthalocyanines as the electron acceptor and PTB7-Th as the electron donor exhibit a power conversion efficiency up to 4 % and an external quantum efficiency approaching 60 % due to significant contributions from both the electron donor and the electron acceptor to the photocurrent, indicating a promising prospect of non-fullerene acceptors based on subphthalocyanines and structurally related systems.
RESUMO
Phthalocyanines (Pcs) are used as sensitizers in dye-sensitized solar cells (DSSCs) because of their stability and intense absorption in the red and near-IR regions. Impressive progress has been made in photovoltaic efficiencies by introduction of bulky peripheral substituents to help suppress macrocycle aggregation. To reach benchmark efficiencies reported for other related dyes, new designs need to be explored. Single carboxy-ZnPc regioisomers substituted at the non-peripheral positions by rigid aryl groups have now been studied, which has shed light on the influence of steric hindrance and/or orientation of the substituent around the anchoring group on the photovoltaic response. The regioisomer bearing the aryl group far away from the anchoring group produces a more effective sensitization of the TiO2 films and higher short-circuit photocurrent density (Jsc). Taking advantage of the good photovoltaic performance in the near-IR region of this ZnPc, it was combined with another appropriate dye for panchromatic sensitization of the mesoporous photoelectrode and an increase of the overall device efficiency.
RESUMO
The use of non-fullerene acceptors in organic photovoltaic (OPV) devices could lead to enhanced efficiencies due to increased open-circuit voltage (VOC) and improved absorption of solar light. Here we systematically investigate planar heterojunction devices comprising peripherally substituted subphthalocyanines as acceptors and correlate the device performance with the heterojunction energetics. As a result of a balance between VOC and the photocurrent, tuning of the interface energy gap is necessary to optimize the power conversion efficiency in these devices. In addition, we explore the role of the charge transport layers in the device architecture. It is found that non-fullerene acceptors require adjusted buffer layers with aligned electron transport levels to enable efficient charge extraction, while the insertion of an exciton-blocking layer at the anode interface further boosts photocurrent generation. These adjustments result in a planar-heterojunction OPV device with an efficiency of 6.9% and a VOC above 1 V.
RESUMO
A series of subphthalocyanines (SubPcs) bearing a carboxylic acid group either at the peripheral or axial position have been designed and synthesized to investigate the influence of the COOH group positions on the dye-sensitized solar cell (DSSC) performance. The DSSC devices based on SubPcs with axially substituted carboxylic acid groups showed low photovoltaic performance, whereas peripherally substituted one exhibited higher power conversion efficiency owing to improved injection from LUMO of SubPcs to the TiO2 conduction band.
RESUMO
Zinc(II) phthalocyanine dyes that contain triarylamine-terminated bisthiophene and hexylbisthiophene groups have been synthesized by a convergent approach by using carboxytriiodo-ZnPc as a precursor. Further transformation of the iodo groups by a Pd-catalyzed reaction allowed easy preparation of further extended π-conjugated carboxy-ZnPcs. These dyes have been used as sensitizers in dye-sensitized solar cells, which exhibit a panchromatic response and moderate overall efficiencies.
RESUMO
The synthesis of stopcocks based on zinc phthalocyanine for selective adsorption at the channel entrances of zeolite L is reported. The introduction of either an inert SiMe3 moiety, an imidazolium cation or a reactive isothiocyanate (NCS) group allows attachment to the channel entrances of zeolite L through van der Waals interactions, electrostatic interactions, or covalent binding, respectively. Stopcocks that rely on van-der-Waals-driven adsorption require careful selection of the solvent used for the deposition onto the zeolite surface to avoid a nonspecific distribution of the molecules. Regarding the design of photonic antenna systems, a stopcock with a cationic tail was found to be the most convenient, based on the observation that efficient energy transfer from molecules located in the zeolite nanochannels is more readily obtained than in the other cases.
RESUMO
Because cancer is the second leading cause of death globally, investigation of new photosensitizers for photodynamic therapy is highly desirable. In this work, different peripherally substituted subphthalocyanines (SubPcs) with either a benzocrown moiety (CE-) or a tyrosine methyl ester (Tyr-) as the axial ligand have been prepared. Target SubPcs showed high ΦΔ values, >0.50 in EtOH. Both CE- and Tyr- moieties increased substantially the hydrophilicity of the compounds (log P = 1.79-2.63, n-octanol/PBS). Uptake to cells, subcellular localization, and monitoring of the progression of cell death over time are described. Improved spectroscopic behavior of the CE- series in cell culture medium resulted in higher photodynamic activity versus that of the Tyr- series. In particular, the peripherally triethylsulfanyl SubPc-CE exhibited extraordinarily low EC50 values of 2.3 and 4.4 nM after light activation and high TC50 values of 14.49 and 5.25 µM (i.e., dark toxicity without activation) on SK-MEL-28 and HeLa cells, respectively, which rank it among the best photosensitizers ever.
Assuntos
Isoindóis/farmacologia , Fotoquimioterapia , Fármacos Fotossensibilizantes/farmacologia , Linhagem Celular Tumoral , Humanos , Isoindóis/química , Fármacos Fotossensibilizantes/química , Relação Estrutura-AtividadeRESUMO
Complementary experiments, that is, femtosecond up-conversion fluorescence, conventional fluorescence lifetime measurements, and transient absorption measurements, imply efficient porphyrin-to-phthalocyanine energy transfer phenomena in NH-connected porphyrin/phthalocyanine conjugates.
Assuntos
Transferência de Energia , Indóis/química , Porfirinas/química , Absorção , Isoindóis , Espectrometria de Fluorescência , TemperaturaRESUMO
Here we report gold(i)-catalyzed cycloisomerization as a new powerful synthetic tool for the preparation of π-extended BODIPY derivatives. The catalytic system PPhF 3AuCl/AgSbF6 enables the synthesis of [b]-[2,1]naphtho-fused-BODIPYs (2a-2c) under mild conditions, in excellent yields and short reaction times. The reaction is totally regioselective to the 6-endo-dig product and for the α-position of the BODIPY, which is both the kinetically and thermodynamically favored pathway, as supported by the free energy profile calculated by means of Density Functional Theory (DFT). Moreover, this methodology also allows the synthesis of two new families of [b]-aryl-fused-BODIPYs, namely, [3,4]phenanthro- (2e and 2f) and [1,2]naphtho-fused (2g) BODIPYs. Their molecular and electronic structures were established by NMR and UV-vis spectroscopies as well as single-crystal X-ray diffraction analysis. As can be noted from the X-ray structures, 2a, 2e and 2g present interesting structural differences at both the molecular and packing level. Interestingly, despite being isomers, the UV/vis spectra of 2a and 2g revealed significant differences in their electronic structures. The origin of this finding was studied by Time-Dependent DFT calculations. Calculated DFT Nuclear Independent Chemical Shift (NICS(0)) values also supported the different electronic structures of 2a and 2g.
RESUMO
The development of new chromophoric receptors capable of binding curved carbon nanostructures is central to the quest for improved fullerene-based organic photovoltaics. We herein report the synthesis and characterization of a subphthalocyanine-based multicomponent ensemble consisting of two electron-rich SubPc-monomers rigidly attached to the convex surface of an electron-poor SubPc-dimer. Such a unique configuration, especially in terms of the two SubPc-monomers, together with the overall stiffness of the linker, endows the multicomponent system with a well-defined tweezer-like topology to efficiently embrace a fullerene in its inner cavity. The formation of a 1 : 1 complex was demonstrated in a variety of titration studies with either C60 or C70. In solution, the underlying association constants were of the order of 105 M-1. Detailed physicochemical experiments revealed a complex scenario of energy- and electron-transfer processes upon photoexcitation in the absence and presence of fullerenes. The close proximity of the fullerenes to the electron-rich SubPcs enables a charge shift from the initially formed reduced SubPc-dimer to either C60 to C70.
RESUMO
Within the present work, two series of novel ruthenium(II) phthalocyanine (RuPc) complexes with one [RuPcCOPy-nT] or two [RuPc(Py-nT)(2)] dendritic oligothiophene (DOT) ligands in the axial positions are reported. The ability of Ru(II) for axial coordination in RuPcs allowed the attachment of the Pc through the metal site to the DOT-ligands bearing pyridine at the core position of the dendrons. These extended pyridine functionalized conjugated DOT-ligands (Py-nT) were chosen to cover the spectral window between 380 and 550 nm, where the RuPc does not exhibit a strong absorption, in order to improve the light-absorption of these complexes and hence enhance the efficiency of the corresponding solar cells. Good efficiencies of up to 1.6% have been achieved when blended together with a fullerene acceptor in solution-processed photovoltaic devices, providing by far the best phthalocyanine-based bulk heterojunction solar cells reported to-date.
RESUMO
A family of inherently chiral nonplanar aromatic chromophores, comprising Subphthalocyanines bearing fluorenone-fused units (SubFcs), have been prepared by an innovative one-pot synthesis, which relies on the standard cross-cyclotrimerization of phthalonitriles followed by intramolecular Friedel-Crafts acylation. Their Q-band absorption experiences a ca. 20 nm red shift per fused fluorenone as a consequence of the enlarged conjugated π-system.
RESUMO
We report the first phthalocyanine-based stopcock for selective adsorption to the channel entrances of zeolite L and realisation of a new electronic dipole moment coupling situation.
RESUMO
[structure: see text] Two types of covalently NH-linked porphyrin-phthalocyanine dyads, connected either through the meso phenyl group or the beta-pyrrolic position of the porphyrin, have been synthesized following statistical condensation methodologies for phthalocyanine preparation and palladium-catalyzed amination methods. Photophysical studies have revealed that energy transfer from the porphyrin to the phthalocyanine prevails regardless of linkage.
RESUMO
To date ß-aryloxy-substituted designs have led to the best results in phthalocyanine-sensitized solar cells (Pc-SCs) because of their low aggregation properties. By incorporating the bulky semiflexible 2,6-diphenylphenoxy group at three α-positions of the Pc, different regioisomers were separated by column chromatography and their photovoltaic performance was thoroughly studied. Efficiencies in the range of 1.9-4.1 % were found, thus demonstrating the importance of the steric interaction between the substituents and the semiconductor surface, also in the case of bulky semiflexible substituents. It was discovered that regioisomers which presented greater steric hindrance around the anchoring group, had lower adsorption densities, and, consequently, lower short-circuit photocurrents (Jsc ) and efficiencies.