Multicenter comparison of Etest, Vitek2 and BD Phoenix to broth microdilution for beta-lactam susceptibility testing of Streptococcus pneumonia.

PURPOSE: To assess performance of Etest®, Vitek®2 and BD Phoenix™ to determine the susceptibility of Streptococcus pneumoniae strains to penicillin, ampicillin and cefotaxime. METHODS: Sixty unique S. pneumoniae challenge strains were selected to cover a wide range of penicillin, ampicillin and cefotaxime minimal inhibitory concentrations (MICs). Strains were analyzed in four different Belgian laboratories. Etest® benzylpenicillin (BEN), ampicillin/amoxicillin (AMP) and cefotaxime (CTA) (bioMérieux), Vitek®2 AST-ST03 (bioMérieux) and BD Phoenix™ SMIC/ID-11 testing were each performed in two different labs. Results were compared to Sensititre® broth microdilution (BMD) (Thermo Fisher Scientific) results. MIC results were interpreted using EUCAST non-meningitis breakpoints (v 13.0). RESULTS: Essential agreement (EA) was ≥ 90% for all methods compared to BMD, except for Etest® BEN on Oxoid plate (58.3%), Etest® AMP (both on Oxoid (65.8%) and BD BBL plate (84.2%)). Categorical agreement (CA) for penicillin was only ≥ 90% for Vitek®2, for other methods CA ranged between 74 and 84%. CA for AMP was for all methods < 90% (range 75.8-88.3%) and CA for CTA was between 87 and 90% for all methods except for Etest on Oxoid plate (79.2%). CONCLUSIONS: Our study indicates that Vitek®2 and BD Phoenix™ are reliable for providing accurate pneumococcal susceptibility results for BEN, AMP and CTA. Using Etest BEN or AMP on Oxoid plate carries a risk of underestimating the MIC and should be interpreted with caution, especially when the obtained MIC is 1 or 2 doubling dilutions below the S or R clinical breakpoint.

Enhancing the Possibilities of Comprehensive Two-Dimensional Liquid Chromatography through Hyphenation of Purely Aqueous Temperature-Responsive and Reversed-Phase Liquid Chromatography.

Comprehensive two-dimensional liquid chromatography (LC × LC) allows for substantial gains in theoretical peak capacity in the field of liquid chromatography. However, in practice, theoretical performance is rarely achieved due to a combination of undersampling, orthogonality, and refocusing issues prevalent in many LC × LC applications. This is intricately linked to the column dimensions, flow rates, and mobile-phase compositions used, where, in many cases, incompatible or strong solvents are introduced in the second-dimension (2D) column, leading to peak broadening and the need for more complex interfacing approaches. In this contribution, the combination of temperature-responsive (TR) and reversed-phase (RP) LC is demonstrated, which, due to the purely aqueous mobile phase used in TRLC, allows for complete and more generic refocusing of organic solutes prior to the second-dimension RP separation using a conventional 10-port valve interface. Thus far, this was only possible when combining other purely aqueous modes such as ion exchange or gel filtration chromatography with RPLC, techniques which are limited to the analysis of charged or high MW solutes, respectively. This novel TRLC × RPLC combination relaxes undersampling constraints and complete refocusing and therefore offers novel possibilities in the field of LC × LC including temperature modulation. The concept is illustrated through the TRLC × RPLC analysis of mixtures of neutral organic solutes.

Combining Two Methods of Sequence Definition in a Convergent Approach: Scalable Synthesis of Highly Defined and Multifunctionalized Macromolecules.

The straightforward convergent synthesis of sequence-defined and multifunctionalized macromolecules is described herein. The first combination of two efficient approaches for the synthesis of sequence-defined macromolecules is reported: thiolactone chemistry and the Passerini three-component reaction (P-3CR). The thiolactone moiety was used as protecting group for the thiol, allowing the synthesis of a library of sequence-defined α,ω-functionalized building blocks. These building blocks were subsequently efficiently coupled to oligomers with carboxylic acid functionalities in a P-3CR. Thus, larger oligomers with molecular weights of up to 4629.73 g mol-1 were obtained in gram quantities in a convergent approach along with the introduction of independently selectable side chains (up to 15), thus clearly demonstrating the high versatility and the efficiency of the reported approach.

Click and Click-Inspired Chemistry for the Design of Sequence-Controlled Polymers.

During the previous decade, many popular chemical reactions used in the area of "click" chemistry and similarly efficient "click-inspired" reactions have been applied for the design of sequence-defined and, more generally, sequence-controlled structures. This combination of topics has already made quite a significant impact on scientific research to date and has enabled the synthesis of highly functionalized and complex oligomeric and polymeric structures, which offer the prospect of many exciting further developments and applications in the near future. This minireview highlights the fruitful combination of these two topics for the preparation of sequence-controlled oligomeric and macromolecular structures and showcases the vast number of publications in this field within a relatively short span of time. It is divided into three sections according to the click-(inspired) reaction that has been applied: copper-catalyzed azide-alkyne cycloaddition, thiol-X, and related thiolactone-based reactions, and finally Diels-Alder-chemistry-based routes are outlined, respectively.

Responsive Thiolactone-Derived N-Substituted Poly(Urethane-Amide)s.

AB' type monomers containing a thiolactone unit and vinyl ether moiety have been prepared with high yields. Aminolysis of the thiolactone moiety generates the corresponding thiol in situ, and upon UV-irradiation, radical polyaddition occurs in the same medium, yielding linear poly(amide-urethane)s with different side chain residues and (Poly(Ethylene Oxide)) PEO-like backbone. Moreover, these unique polymers feature lower critical solution temperature behavior in water. Systematic modification of the responsive polymers reveals the influence of the variation of the side chains and the backbone structure on the corresponding solubility properties. In selected cases, multiresponsive polymers have been developed, which also respond to pH and metal concentration.

Automated Synthesis of Monodisperse Oligomers, Featuring Sequence Control and Tailored Functionalization.

Long, multifunctional sequence-defined oligomers were obtained on solid support from a protecting-group-free two-step iterative protocol, based on the inherent reactivity of a readily available molecule containing an isocyanate and a thiolactone. Aminolysis of the latter entity with an amino alcohol liberates a thiol that reacts with an acrylate or acrylamide, present in the same medium. Subsequently, a new thiolactone can be reinstated by means of an α-isocyanato-γ-thiolactone. Different acrylic compounds were used to incorporate diverse functionalities in the oligomers, which were built up to the level of decamers. The reaction conditions were closely monitored in order to fine-tune the applied strategy as well as facilitate the translation to an automated protocol.

Double Modification of Polymer End Groups through Thiolactone Chemistry.

A straightforward synthetic procedure for the double modification and polymer-polymer conjugation of telechelic polymers is performed through amine-thiol-ene conjugation. Thiolactone end-functionalized polymers are prepared via two different methods, through controlled radical polymerization of a thiolactone-containing initiator, or by modification of available end-functionalized polymers. Next, these different linear polymers are treated with a variety of amine/acrylate-combinations in a one-pot procedure, creating a library of tailored end-functionalized polymers. End group conversions are monitored via SEC, NMR, and MALDI-TOF analysis, confirming the quantitative modification after each step. Finally, this strategy is applied for the synthesis of block copolymers via polymer-polymer conjugation and the successful outcome is analyzed via LCxSEC measurements.

Severity of COVID-19 among Hospitalized Patients: Omicron Remains a Severe Threat for Immunocompromised Hosts.

The Omicron variant of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) emerged in the general population in the context of a relatively high immunity gained through the early waves of coronavirus disease 19 (COVID-19), and vaccination campaigns. Despite this context, a significant number of patients were hospitalized, and identifying the risk factors associated with severe disease in the Omicron era is critical for targeting further preventive, and curative interventions. We retrospectively analyzed the individual medical records of 1501 SARS-CoV-2 positive hospitalized patients between 13 December 2021, and 13 February 2022, in Belgium, of which 187 (12.5%) were infected with Delta, and 1036 (69.0%) with Omicron. Unvaccinated adults showed an increased risk of moderate/severe/critical/fatal COVID-19 (crude OR 1.54; 95% CI 1.09-2.16) compared to vaccinated patients, whether infected with Omicron or Delta. In adults infected with Omicron and moderate/severe/critical/fatal COVID-19 (n = 323), immunocompromised patients showed an increased risk of in-hospital mortality related to COVID-19 (adjusted OR 2.42; 95% CI 1.39-4.22), compared to non-immunocompromised patients. The upcoming impact of the pandemic will be defined by evolving viral variants, and the immune system status of the population. The observations support that, in the context of an intrinsically less virulent variant, vaccination and underlying patient immunity remain the main drivers of severe disease.

Laboratory information system requirements to manage the COVID-19 pandemic: A report from the Belgian national reference testing center.

OBJECTIVE: The study sought to describe the development, implementation, and requirements of laboratory information system (LIS) functionality to manage test ordering, registration, sample flow, and result reporting during the coronavirus disease 2019 (COVID-19) pandemic. MATERIALS AND METHODS: Our large (>12 000 000 tests/y) academic hospital laboratory is the Belgian National Reference Center for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) testing. We have performed a moving total of >25 000 SARS-CoV-2 polymerase chain reaction tests in parallel to standard routine testing since the start of the outbreak. A LIS implementation team dedicated to develop tools to remove the bottlenecks, primarily situated in the pre- and postanalytical phases, was established early in the crisis. RESULTS: We outline the design, implementation, and requirements of LIS functionality related to managing increased test demand during the COVID-19 crisis, including tools for test ordering, standardized order sets integrated into a computerized provider order entry module, notifications on shipping requirements, automated triaging based on digital metadata forms, and the establishment of databases with contact details of other laboratories and primary care physicians to enable automated reporting. We also describe our approach to data mining and reporting of actionable daily summary statistics to governing bodies and other policymakers. CONCLUSIONS: Rapidly developed, agile extendable LIS functionality and its meaningful use alleviates the administrative burden on laboratory personnel and improves turnaround time of SARS-CoV-2 testing. It will be important to maintain an environment that is conducive for the rapid adoption of meaningful LIS tools after the COVID-19 crisis.

Multifunctional sequence-defined macromolecules for chemical data storage.

Sequence-defined macromolecules consist of a defined chain length (single mass), end-groups, composition and topology and prove promising in application fields such as anti-counterfeiting, biological mimicking and data storage. Here we show the potential use of multifunctional sequence-defined macromolecules as a storage medium. As a proof-of-principle, we describe how short text fragments (human-readable data) and QR codes (machine-readable data) are encoded as a collection of oligomers and how the original data can be reconstructed. The amide-urethane containing oligomers are generated using an automated protecting-group free, two-step iterative protocol based on thiolactone chemistry. Tandem mass spectrometry techniques have been explored to provide detailed analysis of the oligomer sequences. We have developed the generic software tools Chemcoder for encoding/decoding binary data as a collection of multifunctional macromolecules and Chemreader for reconstructing oligomer sequences from mass spectra to automate the process of chemical writing and reading.

One-Pot Modular Synthesis of Functionalized RAFT Agents Derived from a Single Thiolactone Precursor.

In this paper, the straightforward preparation of a range of functionalized trithiocarbonates as RAFT chain transfer agents (CTAs) is presented. The crucial step in the one-pot, three-step reaction sequence is the aminolysis of a thiolactone precursor as it introduces the desired functional handle (double bond, hydroxyl, furan, protected amine, ...) and generates the corresponding thiol in situ, facilitating further elaboration of the CTA. Furthermore, the newly synthesized trithiocarbonates were positively evaluated as mediators in the RAFT polymerization of styrene, isobornyl acrylate, and N-isopropylacrylamide, while the presence of the end groups in the heterotelechic polymers was confirmed by NMR and UV-vis analysis.

Tunable temperature responsive liquid chromatography through thiolactone-based immobilization of poly(N-isopropylacrylamide).

A straightforward and efficient functionalization of aminopropylsilica with polymeric structures is described for the development of temperature responsive stationary phases applicable in purely aqueous liquid chromatography. The immobilization of the thermoresponsive polymers involves a thiolactone-based ring opening using the primary amines in aminopropylsilica, with a simultaneous one-pot, thiol-ene functionalization with an acrylate of choice. This mild, straightforward and modular grafting process results in high polymer coupling yields. By variation of the acrylate for the thiol-ene reaction, different stationary phases can be readily obtained. Two stationary phases as a result of the modular modification of aminopropylsilica were evaluated with test mixtures of hydrophobic analytes and a mixture of di- and tripeptides. Analyses using the 5µm material packed in 10cm×4.6mm columns revealed high hydrophobic retention, which proved adaptable as a function of the temperature in aqueous mobile phases. High versus low retention were obtained at temperatures above and below the lower critical solution temperature of the polymer, respectively. Moreover, the columns depict potential for diastereoisomeric peptide separation. Finally, the lower retention, observed when using PEGylated silica, illustrates the potential of the approach for modular stationary phase tuning.