RESUMO
OBJECTIVES: The objective of this study was to investigate the effects of medium composition on CO fermentation by Clostridium carboxidivorans. The focus was to reduce the medium cost preserving acceptable levels of solvent production. METHODS: Yeast extract (YE) concentration was set in the range of 0-3 g/L. Different reducing agents were investigated, including cysteine-HCl 0.6 g/L, pure cysteine 0.6 g/L, sodium sulphide (Na2S) 0.6 g/L, cysteine-sodium sulphide 0.6 g/L and cysteine-sodium sulphide 0.72 g/L. The concentration of the metal solution was decreased down to 25 % of the standard value. Fermentation tests were also carried out with and without tungsten or selenium. RESULTS: The results demonstrated that under optimized conditions, namely yeast extract (YE) concentration set at 1 g/L, pure cysteine as the reducing agent and trace metal concentration reduced to 75 % of the standard value, reasonable solvent production was achieved in less than 150 h. Under these operating conditions, the production levels were found to be 1.39 g/L of ethanol and 0.27 g/L of butanol. Furthermore, the study revealed that selenium was not necessary for C. carboxidivorans fermentation, whereas the presence of tungsten played a crucial role in both cell growth and solvent production. CONCLUSIONS: The optimization of the medium composition in CO fermentation by Clostridium carboxidivorans is crucial for cost-effective solvent production. Tuning the yeast extract (YE) concentration, using pure cysteine as the reducing agent and reducing trace metal concentration contribute to reasonable solvent production within a relatively short fermentation period. Tungsten is essential for cell growth and solvent production, while selenium is not required.
Assuntos
Reatores Biológicos , Clostridium , Meios de Cultura , Fermentação , Clostridium/metabolismo , Clostridium/crescimento & desenvolvimento , Meios de Cultura/química , Reatores Biológicos/microbiologia , Monóxido de Carbono/metabolismo , Etanol/metabolismo , Selênio/metabolismo , Butanóis/metabolismo , Tungstênio/metabolismoRESUMO
Leveraging renewable carbon-based resources for energy and chemical production is a promising approach to decrease reliance on fossil fuels. This entails a thermo/biotechnological procedure wherein bacteria, notably Clostridia, ferment syngas, converting CO or CO2 + H2 into Hexanol, Butanol and Ethanol (H-B-E fermentation). This work reports of Clostridium carboxidivorans performance in a stirred tank reactor continuously operated with respect to the gas and the cell/liquid phases. The primary objective was to assess acid and solvent production at pH 5.6 by feeding pure CO or synthetic syngas under gas flow differential conditions. Fermentation tests were conducted at four different dilution rates (DL) of the fresh medium in the range 0.034-0.25 h-1. The fermentation pathways of C. carboxidivorans were found to be nearly identical for both CO and syngas, with consistent growth and metabolite production at pH 5.6 within a range of dilution rates. Wash-out conditions were observed at a DL of 0.25 h-1 regardless of the carbon source. Ethanol was the predominant solvent produced, but a shift towards butanol production was observed with CO as the substrate and towards hexanol production with synthetic syngas. In particular, the maximum cell concentration (0.5 gDM/L) was obtained with pure CO at DL 0.05 h-1; the highest solvent productivity (60 mg/L*h of total solvent) was obtained at DL 0.17 h-1 by using synthetic syngas as C-source. The findings highlight the importance of substrate composition and operating conditions in syngas fermentation processes. These insights contribute to the optimization of syngas fermentation processes for biofuel and chemical production.
Assuntos
1-Butanol , Butanóis , Fermentação , Butanóis/metabolismo , 1-Butanol/metabolismo , Clostridium/metabolismo , Reatores Biológicos/microbiologia , Etanol/metabolismo , Solventes/metabolismo , Carbono/metabolismo , Hexanóis/metabolismoRESUMO
Reactive absorption into aqueous solutions promoted by carbonic anhydrase (CA, E.C. 4.2.1.1.) has been often proposed as a post-combustion CO2 capture process. The state of the art reveals the need for efficient biocatalyst based on carbonic anhydrase that can be used to further develop CO2 capture and utilization technologies. The present study is focused on the use of a thermostable CA-based biocatalyst. The carbonic anhydrase SspCA, from the thermophilic bacterium Sulfurihydrogenibium yellowstonense, was in vivo immobilized as membrane-anchored protein (INPN-SspCA) on the outer membrane of Escherichia coli cells. The dispersed biocatalyst, made by cell membrane debris, was characterized in terms of its contribution to the enhancement of CO2 absorption in carbonate/bicarbonate alkaline buffer at operating conditions relevant for industrial CO2 capture processes. The amount of immobilized enzyme, estimated by SDS-PAGE, resulted in about 1 mg enzyme/g membrane debris. The apparent kinetics of the biocatalyst was characterized through CO2 absorption tests in a stirred cell lab-scale reactor assuming a pseudo-homogeneous behaviour of the biocatalyst. At 298 K, the assessed values of the second-order kinetic constant ranged between 0.176 and 0.555 Lâmg-1âs-1. Reusability of the biocatalyst after 24 h showed the absence of free enzyme release in the alkaline solvent. Moreover, the equilibration of dispersed cell membrane debris against the alkaline buffer positively affected the performances of the heterogeneous biocatalyst. These results encourage further studies on the in vivo immobilized SspCA aimed at optimizing the enzyme loading on the cell membrane and the handling of the biocatalyst in the CO2 absorption reactors.
Assuntos
Anidrases Carbônicas , Bactérias , Dióxido de Carbono , Enzimas ImobilizadasRESUMO
A dynamical model of a continuous biofilm reactor is presented. The reactor consists of a three-phase internal loop airlift operated continuously with respect to the liquid and gaseous phases, and batchwise with respect to the immobilized cells. The model has been applied to the conversion of phenol by means of immobilized cells of Pseudomonas sp. OX1 whose metabolic activity was previously characterized (Viggiani, A., Olivieri, G., Siani, L., Di Donato, A., Marzocchella, A., Salatino, P., Barbieri, P., Galli, E., 2006. An airlift biofilm reactor for the biodegradation of phenol by Pseudomonas stutzeri OX1. Journal of Biotechnology 123, 464-477). The model embodies the key processes relevant to the reactor performance, with a particular emphasis on the role of biofilm detachment promoted by the fluidized state. Results indicate that a finite loading of free cells establishes even under operating conditions that would promote wash out of the suspended biophase. The co-operative/competitive effects of free cells and immobilized biofilm result in rich bifurcational patterns of the steady state solutions of the governing equations, which have been investigated in the phase plane of the process parameters. Direct simulation under selected operating conditions confirms the importance of the dynamical equilibrium establishing between the immobilized and the suspended biophase and highlights the effect of the initial value of the biofilm loading on the dynamical pattern.
Assuntos
Biofilmes , Reatores Biológicos , Pseudomonas/fisiologia , CinéticaRESUMO
Phenol bioconversion by Pseudomonas stutzeri OX1 using either free or immobilized cells was investigated with the aim of searching for optimal operating conditions of a continuous bioconversion process. The study was developed by analyzing: (a) free-cell growth and products of phenol bioconversion by batch cultures of P. stutzeri; (b) growth of P. stutzeri cells immobilized on carrier particles; (c) bioconversion of phenol-bearing liquid streams and the establishment and growth of an active bacterial biofilm during continuous operation of an internal-loop airlift bioreactor. We have confirmed that free Pseudomonas cultures are able to transform phenol through the classical meta pathway for the degradation of aromatic molecules. Data indicate that bacterial growth is substrate-inhibited, with a limiting phenol concentration of about 600 mg/L. Immobilization tests revealed that a stable bacterial biofilm can be formed on various types of solid carriers (silica sand, tuff, and activated carbon), but not on alumina. Entrapment in alginate beads also proved to be effective for P. stutzeri immobilization. Continuous bioconversion of phenol-bearing liquid streams was successfully obtained in a biofilm reactor operated in the internal-circulation airlift mode. Phenol conversion exceeded 95%. Biofilm formation and growth during continuous operation of the airlift bioreactor were quantitatively and qualitatively assessed.
Assuntos
Biofilmes/crescimento & desenvolvimento , Reatores Biológicos/microbiologia , Fenol/metabolismo , Pseudomonas stutzeri/fisiologia , Eliminação de Resíduos Líquidos/métodos , Biodegradação Ambiental , Cinética , Pseudomonas stutzeri/metabolismo , Eliminação de Resíduos Líquidos/instrumentaçãoRESUMO
Butanol production by Clostridium acetobutylicum DSM 792 fermentation was investigated. Unsupplemented cheese whey was adopted as renewable feedstock. The conversion was successfully carried out in a biofilm packed bed reactor (PBR) for more than 3 months. The PBR was a 4 cm ID, 16 cm high glass tube with a 8 cm bed of 3mm Tygon rings, as carriers. It was operated at the dilution rate between 0.4h(-1) and 0.94 h(-1). The cheese whey conversion process was characterized in terms of metabolites production (butanol included), lactose conversion and biofilm mass. Under optimized conditions, the performances were: butanol productivity 2.66 g/Lh, butanol concentration 4.93 g/L, butanol yield 0.26 g/g, butanol selectivity of the overall solvents production 82 wt%.
Assuntos
Reatores Biológicos , Biotecnologia/instrumentação , Biotecnologia/métodos , Butanóis/metabolismo , Queijo , Proteínas do Leite/metabolismo , Ácidos/metabolismo , Biofilmes , Biomassa , Reatores Biológicos/microbiologia , Clostridium acetobutylicum/crescimento & desenvolvimento , Clostridium acetobutylicum/metabolismo , Proteínas do Soro do LeiteRESUMO
We describe a simple technique for measuring high (up to 0.16) time-averaged solids volumetric concentration in a two-phase flow. The technique is based on a properly modified version of the forward scattering of laser light. It is useful in a variety of practical configurations, and, in particular, it is instrumental in the diagnostics of particle flow in the free board of bubbling fluidized beds and in the circulating fluidized beds. A fallout of this work is the measurement of the extinction coefficient of the solid material tested.