[68 Ga]Ga-PentixaFor: Development of a fully automated in hospital production on the Trasis miniAllinOne synthesizer.

[68 Ga]Ga-PentixaFor is a frequently used radiotracer to image the CXCR4/CXCL12 axis in various malignancies, infections, and cardiovascular diseases. To answer increasing clinical needs, an automatized synthesis process ensuring efficient and reproducible production and improving operator's radioprotection is needed. [68 Ga]Ga-PentixaFor synthesis has been described on other synthesizers but not on the miniAiO. In this work, we defined automated synthesis process and an analytical method for the quality control of [68 Ga]Ga-PentixaFor. Validation batches were performed under aseptic conditions in a class A hotcell. All the quality controls required by the European Pharmacopea (Eur. Ph) were performed. The analytical methods were validated according to the International Conference Harmonization (ICH) recommendations. Validation batches were performed with a radiochemical yield of 94.8 ± 2.6%. All the quality controls were in conformity with the Eur. Ph, and the validation of the analytical method complied with the ICH. The environmental monitoring performed during the synthesis process showed that the aseptic conditions were ensured. [68 Ga]Ga-PentixaFor was successfully synthesized with the miniAiO by a fully automated process. This robust production mode and the quality control have been validated in this study allowing to increase the access of patients to this new promising radiopharmaceutical.

Automated synthesis of 68 Ga/177 Lu-PSMA on the Trasis miniAllinOne.

Prostate-specific membrane antigen (PSMA)-based radioligands for positron emission tomography (PET)/computed tomography (CT) studies represent the gold standard for detection of recurrent prostate cancer (PCa). [68 Ga]PSMA-HBED-CC is a PET radiotracer suitable for detection of PCa, and its clinical use has become widespread over the last few years. In this contribution, we detail our GMP-compliant production of [68 Ga]PSMA-HBED-CC using the Trasis miniAllinOne radiosynthesizer and report synthetic and clinical data for the first 100 productions of 2019. Additionally, we detail our efforts towards a GMP-compliant production of the radiotherapeutic [177 Lu]PSMA-I&T using the same synthesis module. PSMA-based radioligand therapy (RLT) offers a possible future treatment in cases of metastatic castration-resistant PCa, and GMP-compliant routine production methods are therefore called for. This report highlights how PSMA-based agents for theranostic purposes can be conveniently produced at a single radiochemistry Good Manufacturing Practice (GMP) site, thereby facilitating optimized detection and treatment of PCa.

Fermentative hydrogen production from glucose and starch using pure strains and artificial co-cultures ofClostridium spp.

BACKGROUND: Pure bacterial strains give better yields when producing H2 than mixed, natural communities. However the main drawback with the pure cultures is the need to perform the fermentations under sterile conditions. Therefore, H2 production using artificial co-cultures, composed of well characterized strains, is one of the directions currently undertaken in the field of biohydrogen research. RESULTS: Four pure Clostridium cultures, including C. butyricum CWBI1009, C. pasteurianum DSM525, C. beijerinckii DSM1820 and C. felsineum DSM749, and three different co-cultures composed of (1) C. pasteurianum and C. felsineum, (2) C. butyricum and C. felsineum, (3) C. butyricum and C. pasteurianum, were grown in 20 L batch bioreactors. In the first part of the study a strategy composed of three-culture sequences was developed to determine the optimal pH for H2 production (sequence 1); and the H2-producing potential of each pure strain and co-culture, during glucose (sequence 2) and starch (sequence 3) fermentations at the optimal pH. The best H2 yields were obtained for starch fermentations, and the highest yield of 2.91 mol H2/ mol hexose was reported for C. butyricum. By contrast, the biogas production rates were higher for glucose fermentations and the highest value of 1.5 L biogas/ h was observed for the co-culture (1). In general co-cultures produced H2 at higher rates than the pure Clostridium cultures, without negatively affecting the H2 yields. Interestingly, all the Clostridium strains and co-cultures were shown to utilize lactate (present in a starch-containing medium), and C. beijerinckii was able to re-consume formate producing additional H2. In the second part of the study the co-culture (3) was used to produce H2 during 13 days of glucose fermentation in a sequencing batch reactor (SBR). In addition, the species dynamics, as monitored by qPCR (quantitative real-time PCR), showed a stable coexistence of C. pasteurianum and C. butyricum during this fermentation. CONCLUSIONS: The four pure Clostridium strains and the artificial co-cultures tested in this study were shown to efficiently produce H2 using glucose and starch as carbon sources. The artificial co-cultures produced H2 at higher rates than the pure strains, while the H2 yields were only slightly affected.

Comparative study of biological hydrogen production by pure strains and consortia of facultative and strict anaerobic bacteria.

In this paper, a simple and rapid method was developed in order to assess in comparative tests the production of binary biogas mixtures containing CO(2) and another gaseous compound such as hydrogen or methane. This method was validated and experimented for the characterisation of the biochemical hydrogen potential of different pure strains and mixed cultures of hydrogen-producing bacteria (HPB) growing on glucose. The experimental results compared the hydrogen production yield of 19 different pure strains and sludges: facultative and strict anaerobic HPB strains along with anaerobic digester sludges thermally pre-treated or not. Significant yields variations were recorded even between different strains of the same species by i.e. about 20% for three Clostridium butyricum strains. The pure Clostridium butyricum and pasteurianum strains achieved the highest yields i.e. up to 1.36 mol H(2)/mol glucose compared to the yields achieved by the sludges and the tested Escherichia and Citrobacter strains.