Hemodynamic differences between the awake and anesthetized conditions in normal calves.

There is insufficient information in the literature about baseline circulatory parameters in normal calves in the anesthetized versus postoperative awake conditions under which a large volume of medical research is conducted. Eleven calves (mean body weight, 78.1 ± 14.3 kg) were implanted with a flow probe and fluid-filled pressure lines to measure cardiac output (CO), aortic (AoP), central venous (CVP), pulmonary arterial (PAP), and left atrial pressures (LAP). Systemic (SVR) and pulmonary vascular resistance (PVR) were also calculated. We obtained the above hemodynamic data (n = 11) and epicardial echocardiography (n = 7) during open-chest surgery under isoflurane anesthesia. After full recovery from surgery, animals were evaluated in the awake condition on postoperative days 6-9 using transthoracic echocardiography (n = 7) and the hemodynamic monitoring lines and probes noted (n = 11). CO, AoP, and PAP levels in the anesthetized condition were significantly lower than in the awake condition. Other hemodynamic parameters (CVP, LAP, SVR, and PVR) were not significantly different. In conclusion, data from this study quantify changes in CO, AoP, and PAP in anesthetized calves that may affect the hemodynamic response to experimental therapeutics such as new cardiac assist devices, prosthetic valves, and surgical interventions. Our study also provides baseline data for the translation of the hemodynamic data obtained in acute in vivo calf studies to that of an awake subject.

Transcatheter heart valve with variable geometric configuration: in vitro evaluation.

Clinically, the current transcatheter aortic valve (TAV) technology has shown a propensity for paravalvular leakage; studies have correlated this flaw to increased calcification at the implantation site and with nonideal geometry of the stented valve. The present study evaluated the hydrodynamics of different geometric configurations, in particular the intravalvular considerations. Three TAV devices were made to create a representative, size 26 mm TAV. Hydrodynamics were assessed using a pulse duplicator. The geometries tested were composed of the nominal, elliptical, triangular, and undersized shapes; along with half-constriction, a conformation in which only a portion of the stent was constrained. The TAVs were assessed for transvalvular pressure gradient (TVG), effective orifice area (EOA), and regurgitant fraction. The nominal-sized shape posed a larger TVG (6.2 ± 0.3 mm Hg) than other configurations (P < 0.001) except the undersized valves. EOA of the nominal sized TAV (1.7 ± 0.1 cm(2) ) was smaller than that of the triangular and half-elliptical versions (P < 0.001). The half- and full-undersized geometries had EOAs smaller than the nominal type (P < 0.001). Nominal shape had smaller regurgitation (6.7 ± 1.4%) than all configurations (P < 0.001) except for the half-undersized (4.0 ± 0.7, P < 0.001) with no statistically significant difference from the full-undersized (6.8 ± 1.3, P = 0.724). The testing of variable geometries showed significant differences from the nominal geometry with respect to TVG, EOA, and regurgitant fraction. In particular, many of these nonideal configurations demonstrated an increased intravalvular regurgitation.

Use of zirconia ceramic in the DexAide right ventricular assist device journal bearing.

Our aim was to evaluate the potential use of zirconium oxide (zirconia) as a blood journal bearing material in the DexAide right ventricular assist device. The DexAide titanium stator was replaced by a zirconia stator in several blood pump builds, without changing the remaining pump hardware components. In vitro pump performance and efficiency were evaluated at a predetermined pump speed and flow. Motor power consumption decreased by 20%, and DexAide battery life was extended to over 12 h on two fully charged batteries. The zirconia stator was also successfully evaluated in a severe start/stop test pre- and postexposure of the zirconia to accelerated simulated biologic aging. This study's outcomes indicated the advantages of zirconia as an alternate journal bearing material for the DexAide device.

In vivo biocompatibility evaluation of a new resilient, hard-carbon, thin-film coating for ventricular assist devices.

The purpose of this study was to evaluate in vivo the biocompatibility of BioMedFlex (BMF), a new resilient, hard-carbon, thin-film coating, as a blood journal bearing material in Cleveland Heart's (Charlotte, NC, USA) continuous-flow right and left ventricular assist devices (RVADs and LVADs). BMF was applied to RVAD rotating assemblies or both rotating and stator assemblies in three chronic bovine studies. In one case, an LVAD with a BMF-coated stator was also implanted. Cases 1 and 3 were electively terminated at 18 and 29 days, respectively, with average measured pump flows of 4.9 L/min (RVAD) in Case 1 and 5.7 L/min (RVAD) plus 5.7 L/min (LVAD) in Case 3. Case 2 was terminated prematurely after 9 days because of sepsis. The sepsis, combined with running the pump at minimum speed (2000 rpm), presented a worst-case biocompatibility challenge. Postexplant evaluation of the blood-contacting journal bearing surfaces showed no biologic deposition in any of the four pumps. Thrombus inside the RVAD inlet cannula in Case 3 is believed to be the origin of a nonadherent thrombus wrapped around one of the primary impeller blades. In conclusion, we demonstrated that BMF coatings can provide good biocompatibility in the journal bearing for ventricular assist devices.

In vivo evaluation of zirconia ceramic in the DexAide right ventricular assist device journal bearing.

Zirconia is a ceramic with material properties ideal for journal bearing applications. The purpose of this study was to evaluate the use of zirconium oxide (zirconia) as a blood journal bearing material in the DexAide right ventricular assist device. Zirconia ceramic was used instead of titanium to manufacture the DexAide stator housing without changing the stator geometry or the remaining pump hardware components. Pump hydraulic performance, journal bearing reliability, biocompatibility, and motor efficiency data of the zirconia stator were evaluated in six chronic bovine experiments for 14-91 days and compared with data from chronic experiments using the titanium stator. Pump performance data including average in vivo pump flows and speeds using a zirconia stator showed no statistically significant difference to the average values for 16 prior titanium stator in vivo studies, with the exception of a 19% reduction in power consumption. Indices of hemolysis were comparable for both stator types. Results of coagulation assays and platelet aggregation tests for the zirconia stator implants showed no device-induced increase in platelet activation. Postexplant evaluation of the zirconia journal bearing surfaces showed no biologic deposition in any of the implants. In conclusion, zirconia ceramic can be used as a hemocompatible material to improve motor efficiency while maintaining hydraulic performance in a blood journal bearing application.

Human clinical fitting study of the DexAide right ventricular assist device.

The DexAide right ventricular assist device (RVAD) has been developed as an implantable RVAD. The purpose of this study was to determine the final design and optimal anatomical placement of the DexAide RVAD when implanted simultaneously with either of two commercially available left ventricular assist devices (LVADs) in patients. A mock-up DexAide RVAD was used to assess configuration with each of two types of commercially available LVADs at the time of LVAD implantation in three human clinical cases. The pump body of the DexAide RVAD was placed either in the preperitoneal space or in the right thoracic cavity. The DexAide RVAD placed into the right thoracic cavity is suitable for use with the Novacor or HeartMate II LVADs. The results of this study will guide the finalization of the inflow cannula and optimal placement of the DexAide RVAD for human clinical trials.

Innovative, replaceable heart valve: concept, in vitro study, and acute in vivo study.

The purpose of this study was to evaluate the feasibility of our innovative, replaceable heart valves that can be easily detached from the sewing ring at the time of repeat replacement. The prototype devices consist of the base magnet ring assembly and the valve magnet ring assembly that utilize magnetic coupling force for the locking mechanism. Magnetic coupling strength was evaluated in vitro. Prototype bioprosthetic valves were implanted acutely in three sheep to confirm the feasibility of the replaceable mitral valve. The static separation force of prototype size #25 was 12.5 lb, meeting the design goal. In situ attachment and detachment of the valve magnet ring assembly from the base magnet ring assembly were very easily accomplished in all animals. The magnetic coupling did not decouple even under extremely high left ventricular pressures. We have demonstrated the feasibility of this innovative concept of a replaceable mitral valve.

Development of a small implantable right ventricular assist device.

The purpose of this program is to design, develop, and clinically evaluate a new, implantable right ventricular assist device (RVAD) that can be used as a component of an implantable biventricular assist device for patients with severe biventricular heart failure. The initial phase of this program resulted in a prototype RVAD, named DexAide, a modified version of the CorAide left ventricular assist device. In vitro testing was performed in a stand-alone circuit and in a true RVAD mode to evaluate pump performance. Pump flow and power were measured under various afterload and pump speed conditions. The pump performance requirements of 2 to 6 l/min and a pressure rise of 20 to 60 mm Hg were successfully met with pump speeds between 1,800 and 3,200 rpm. The nominal design point of 4 l/min and 40 mm Hg pressure rise was achieved at 2,450 +/- 70 rpm with a power consumption of 3.0 +/- 0.2 W. The initial in vitro testing met the design criteria for the new DexAide RVAD. Initial in vivo testing is under way, which will be followed by preclinical readiness testing and a pilot clinical trial in this 5-year program.

Initial in vivo evaluation of the DexAide right ventricular assist device.

Despite the increasing use of left ventricular assist devices for patients with end-stage congestive heart failure, no implantable, centrifugal right ventricular assist devices (RVADs) are available for those patients with significant right ventricular failure. The DexAide RVAD was developed to provide an implantable RVAD option to surgeons. The aim of this study was to evaluate pump performance in an acute in vivo model. The DexAide RVAD, developed as a modified CorAide left ventricular assist device, was implanted between the right ventricle and the pulmonary artery in four healthy calves. Pump speed was varied from 1800 rpm to 3600 rpm. RVAD performance was analyzed acutely at baseline and under conditions of low circulating volume, high contractility, high pulmonary arterial pressure, vasodilation, and low contractility. Pump flow was well maintained even under conditions of high pulmonary arterial pressure and vasodilation, with the exception of low circulating volume. Under all conditions, pulmonary arterial pressures were not affected by changing pump speed. The DexAide RVAD demonstrated acceptable hemodynamic characteristics for use as an implantable RVAD in the initial acute studies. Further studies are ongoing to examine the biocompatibility of the pump under chronic conditions.

Preclinical readiness testing of the Arrow International CorAide left ventricular assist system.

BACKGROUND: Left ventricular assist system technologies are currently being developed as effective alternatives to cardiac transplantation. In this study, in vivo testing of the Arrow International CorAide left ventricular assist system was conducted to determine its preclinical readiness based on demonstrated system performance and biocompatibility. METHODS: Arrow International CorAide blood pump assemblies were implanted in 7 calves for 1-month (n = 4) and 3-month (n = 3) durations without the use of chronic anticoagulation therapy. Hemodynamic performance, physiologic pump control, end-organ function, and device-related adverse events were evaluated during the studies and at autopsy. RESULTS: Hemodynamics were stable in all cases with a mean pump flow of 4.1 +/- 0.8 L/min and a mean arterial pressure of 101 +/- 4 mm Hg. In all calves, renal and hepatic function remained normal with no incidence of hemolysis, infection, bleeding, or embolism. The CorAide physiologic control algorithm demonstrated appropriate pump speed and flow adjustments in response to physiologically induced inputs, and the system's external electronic components demonstrated no hardware or software malfunction. All 7 cases were sacrificed electively. Autopsy revealed no sign of end-organ disease on gross and histologic examinations, and no device failure, malfunction, or mechanical wear of the pump blood-bearing surfaces was found. CONCLUSIONS: The Arrow CorAide left ventricular assist system demonstrated effective pump performance and good biocompatibility with no incidence of device-related adverse events. This system has completed its preclinical readiness testing and is approved for clinical trials in Europe in 2003.

In vitro controllability of the MagScrew total artificial heart system.

The purpose of this study was to evaluate the in vitro responses to preload and afterload of our total artificial heart (TAH), the MagScrew TAH. The TAH consists of two blood pumps and a control logic, developed at the Cleveland Clinic, OH, and the MagScrew actuator and its electronic control system, developed by Foster-Miller Technologies, Inc., Albany, NY. Tests were performed on a mock circulatory loop, using water as a test fluid. Preload sensitivity of the Mag-Screw TAH demonstrated a Frank-Starling response to preload in automatic mode. A peak flow of 10 L/min was obtained, with a left atrial pressure of 13 mm Hg. The relationship between right atrial pressure and left atrial pressure was well balanced when tested with a left bronchial shunt flow of 5% and a range of pulmonary artery and aortic pressures. With respect to afterload response, the left pump showed a relatively low sensitivity, which allowed the pump to maintain perfusion over a wide range of aortic pressures. The right pump, on the other hand, was much more sensitive to pulmonary artery pressure, which provided a measure of protection against pulmonary congestion. The very effective physiologic response of the MagScrew TAH is believed to result from employment of a left master, alternating ejection control logic, high inherent sensitivity of the blood pumps to atrial pressure, a lower effective stroke volume for the right pump, and a scaling of right side motor ejection voltage to 80% of that used for the left side ejection.

In vivo studies of the MagScrew total artificial heart in calves.

The purpose of this study was to evaluate the in vivo pump performance of our total artificial heart (TAH), the "MagScrew TAH." The TAH consists of a blood pump and control logic developed at the Cleveland Clinic and the MagScrew actuator and electronic control system developed by Foster-Miller Technologies, Inc. (Albany, NY). MagScrew TAH implantation was performed in two calves. Study durations were 50 and 5 days. The causes of termination were prosthetic valve endocarditis in one case and cable failure in the other. Mean left pump flow ranged from 8.0 to 9.7 L/min, with left atrial pressure of 3.0 to 16.0 mm Hg. Preload sensitivity of the MagScrew TAH demonstrated a Frank-Starling response to preload in automatic mode. The relationship between right and left atrial pressure was well balanced. Mean arterial pressure and mean pulmonary artery pressure were maintained within physiologic ranges over study duration. There were no signs of bleeding, hemolysis, or organ failure. The MagScrew TAH showed physiologic pump performance, and hemodynamics were well maintained without any organ failure. Further development testing will bring the MagScrew TAH to the point of preclinical readiness testing.

Cleveland clinic CorAide blood pump circulatory support without anticoagulation.

The Cleveland Clinic CorAide left ventricular assist system consists of a permanently implantable centrifugal pump in which the rotating assembly is completely suspended and noncontacting. A series of chronic animal in vivo studies were conducted to evaluate the biologic effects of CorAide circulatory support without the use of anticoagulation therapy. The CorAide pump was implanted in six calves (five calves for 21 to 32 days and one calf for 95 days). The first five calves received intravenous heparin during the early postoperative periods (2-7 days). Heparin administration was then discontinued and no other anticoagulant drugs were used for the duration of the experiments. The last calf did not receive any anticoagulant except for a bolus dose of heparin (200 U/kg) during surgery. Hemodynamics were stable in all six calves, with a mean pump flow of 5.6+/-1.2 L/min and mean arterial pressure of 100+/-4 mm Hg. The blood pump surfaces were clean of thrombus in all six calves. Significant findings at autopsy were limited to one case of renal infarction. There was no incidence of mechanical failure, bleeding, or device infection. The CorAide pump can be safely run with minimal or no anticoagulant therapy.

Percutaneous lead dysfunction in the HeartMate II left ventricular assist device.

BACKGROUND: The incidence of percutaneous lead failure among patients supported with a HeartMate II left ventricular assist device is unknown. METHODS: All HeartMate II left ventricular assist device driveline dysfunctions reported to Thoratec Corporation were retrospectively reviewed. The location and severity of driveline failures and their association with adverse clinical outcomes were examined. Also, the effect of design modifications was evaluated. RESULTS: Between 2004 and October 2012, 12,969 HeartMate II pumps were implanted worldwide. The incidence of percutaneous lead dysfunction was 1,418 events occurring in 1,198 pumps (9.2% of pumps) over a cumulative support period of 13,932 patient-years (maximum, 8 years). Lead failure was mostly in the externalized part of the cable (87.2%). Lead dysfunction was managed by clamshell reinforcement of the external connector strain relief or by tape or silicone cable reinforcement in 76% of cases. Mortality or significant morbidity, including pump exchange or urgent transplant, or more complex cable repair occurred in 2.3% of all implanted pumps. The cumulative incidence of lead failures leading to major adverse clinical events has decreased with two lead design revisions: at 18 months postimplantation, the incidence was 6.2%±1.2% for the original design versus 2.2%±0.5% for the latest design change introduced in 2010 (log-rank p<0.001). CONCLUSIONS: Lead failures remain an important factor in the durability of left ventricular assist devices during long-term support. Most lead failures in the HeartMate II occurred in the externalized portion of the driveline, suggesting lead fatigue. The incidence of both internal and external lead failures has diminished since 2004 with improvements in lead design.

Overview of current sutureless and transcatheter mitral valve replacement technology.

Mitral valve (MV) regurgitation is the most prevalent form of heart valve disease. As it comes to surgical repair or replacement of the diseased valves, the procedure has been established as safe and effective; however, its invasiveness still carries considerable risk of significant morbidity and mortality. With aging comes increased MV dysfunction, and thus minimally invasive technology is rapidly evolving to meet the challenges of older patients' preoperative comorbidities and risks associated with surgery. In comparison, in high-risk patients with aortic stenosis, percutaneous transcatheter technologies offer a viable alternative to surgery; however, catheter-based procedures for MV disease are limited only to repair. MV surgeries have limitations and carry the potential for serious complications in high-risk elderly patients. A fast, reliable sutureless or catheter-based means of MV replacement is needed. Although transcatheter devices are still only in preclinical testing or developmental stages, the authors here review various sutureless MV and transcatheter-based concepts and devices for MV replacement.

Cardiac autonomic nerve stimulation in the treatment of heart failure.

Research on the therapeutic modulation of cardiac autonomic tone by electrical stimulation has yielded encouraging early clinical results. Vagus nerve stimulation has reduced the rates of morbidity and sudden death from heart failure, but therapeutic vagus nerve stimulation is limited by side effects of hypotension and bradycardia. Sympathetic nerve stimulation that has been implemented in the experiment may exacerbate the sympathetic-dominated autonomic imbalance. In contrast, concurrent stimulation of both sympathetic and parasympathetic cardiac nerves increases myocardial contractility without increasing heart rate. This review assesses the current state of electrical stimulation of the cardiac autonomic nervous system to treat heart failure.

Mechanical circulatory support for heart failure: past, present and a look at the future.

Heart transplantation remains the gold standard for long-term cardiac replacement, but a shortage of donor organs will always limit this option. For both transplant-eligible and noneligible patients, advances in mechanical circulatory support have revolutionized the options for the management of end-stage heart failure, and this technology continues to bring us closer to a true alternative to heart transplantation. This review provides a perspective on the past, present and future of mechanical circulatory support and addresses the changes in technology, patient selection and management strategies needed to have this therapy fully embraced by the heart failure community, and perhaps replace heart transplantation either as the therapy of choice or as a strategy by which to delay transplantation in younger patients.

Axial and centrifugal continuous-flow rotary pumps: a translation from pump mechanics to clinical practice.

The recent success of continuous-flow circulatory support devices has led to the growing acceptance of these devices as a viable therapeutic option for end-stage heart failure patients who are not responsive to current pharmacologic and electrophysiologic therapies. This article defines and clarifies the major classification of these pumps as axial or centrifugal continuous-flow devices by discussing the difference in their inherent mechanics and describing how these features translate clinically to pump selection and patient management issues. Axial vs centrifugal pump and bearing design, theory of operation, hydrodynamic performance, and current vs flow relationships are discussed. A review of axial vs centrifugal physiology, pre-load and after-load sensitivity, flow pulsatility, and issues related to automatic physiologic control and suction prevention algorithms is offered. Reliability and biocompatibility of the two types of pumps are reviewed from the perspectives of mechanical wear, implant life, hemolysis, and pump deposition. Finally, a glimpse into the future of continuous-flow technologies is presented.

Preload sensitivity in cardiac assist devices.

With implantable cardiac assist devices increasingly proving their effectiveness as therapeutic options for end-stage heart failure, it is important for clinicians to understand the unique physiology of device-assisted circulation. Preload sensitivity as it relates to cardiac assist devices is derived from the Frank-Starling relationship between human ventricular filling pressures and ventricular stroke volume. In this review, we stratify the preload sensitivity of 17 implantable cardiac assist devices relative to the native heart and discuss the effect of preload sensitivity on left ventricular volume unloading, levels of cardiac support, and the future development of continuous-flow total artificial heart technology.

Periarteritis in lung from a continuous-flow right ventricular assist device: role of the local Renin-Angiotensin system.

BACKGROUND: We previously reported renal arterial periarteritis after implantation of a continuous-flow left ventricular assist device in calves. The purpose of the present study was to investigate whether the same periarteritis changes occur in the intrapulmonary arteries after implantation of a continuous-flow right ventricular assist device (CFRVAD) in calves and to determine the mechanism of those histologic changes. METHODS: Ten calves were implanted with a CFRVAD for 29 ± 7 days, and we compared pulmonary artery samples and hemodynamic data before and after CFRVAD implantation prospectively. RESULTS: After implantation, the pulsatility index (pulmonary arterial pulse pressure/pulmonary arterial mean pressure) significantly decreased (0.88 ± 0.40 before vs 0.51 ± 0.22 after; p < 0.05), with severe periarteritis of the intrapulmonary arteries in all animals. Periarterial pathology included hyperplasia and inflammatory cell infiltration. The number of inflammatory cells positive for the angiotensin II type 1 receptor was significantly higher after implantation (7.8 ± 6.5 pre-CFRVAD vs 313.2 ± 145.2 at autopsy; p < 0.01). Serum angiotensin-converting enzyme activity significantly decreased after implantation from 100% to 49.7 ± 17.7% at week 1 (p = 0.01). Tissue levels of angiotensin-converting enzyme also demonstrated a significant reduction (0.381 ± 0.232 before implantation vs 0.123 ± 0.096 at autopsy; p = 0.043). CONCLUSIONS: Periarteritis occurred in the intrapulmonary arteries of calves after CFRVAD implantation. The local renin-angiotensin system (not the angiotensin-converting enzyme pathway) plays an important role in such changes.