RESUMO
Selecting a set of reactants to accurately design a new low dimensional hybrid perovskite could greatly accelerate the discovery of materials with great potential in photovoltaics, or solid-state lighting. However, this design is challenging as most hybrid metal halides are not perovskites and no feature is clearly associated to the structural characteristics of the inorganic metal halide network. This work first demonstrates that the organic molecules are key parameters to determine the structure type of the inorganic network (i.e., perovskite versus non-perovskite). Then, machine learning (ML) algorithms are used to identify the key features of the organic cations leading to the perovskite structure type. Using a large dataset of hybrid metal halides, this work extracts the organic molecules of all hybrid lead halide compounds, calculates 2756 molecular descriptors and fingerprints for each of these molecules, and are able to predict through ML techniques if a specific organic amine will lead to the perovskite type with an accuracy up to 88.65%. Descriptors related to hydrogen bonding are identified as important features. Thus, a simple but reliable design principle could be demonstrated: the presence of primary ammonium cation is the primary condition to prepare hybrid lead halide perovskites regardless of their dimensionalities.
RESUMO
The orange luminescence of α-Al2O3 under UV excitation is characterized by a 2.07-eV orange broadband emission that has not yet been elucidated. This emission is present in natural and synthetic crystals and powders, as well as in Be-treated samples. All orange-luminescent materials have low Fe concentration (mostly <1000 ppm) with traces of divalent cations, mostly Mg, or Be in Be-diffused material (dozens of ppm). Mg2+, Mn2+, and Be2+ cations substitute for trivalent Al. To accommodate the charge deficit, several defects are created, including oxygen vacancies also called F centers. Indeed, our excitation spectra revealed the presence of several different F centers (F, F+, and clustered F2, F2 +, F2 2+) in those samples. However, the thermal stability and the measured luminescence lifetimes do not match with previously reported characteristics of isolated F centers. Based on our experiments, we suggest that a complex aggregate of two F centers (F2 2+) trapped at divalent cations is a major cause of this uncommon microsecond lifetime emission, even if a variety of other defects, including Cr3+, V3+, or interstitial Al3+, are present.
Assuntos
Óxido de Alumínio , Luminescência , Óxido de Alumínio/química , Cátions Bivalentes/química , Medições LuminescentesRESUMO
A series of monolayered lead halide hybrid perovskites (HO2C(CH2)n-1NH3)2PbX4, named (Cn)2PbX4 (n = 4-6, X = Cl, Br), exhibiting a low congruent melting temperature (Tm) (Tm = 130 °C for (C4)2PbBr4), high stability in the molten state, and whitish type emission, are reported. From the synthesis in the molten state, rare solid solutions of mixed organic cations (Cn1-xCn'x)2PbX4 (n, n' = 4-6; X = Cl, Br; 0 ≤ x ≤1) as well as solid solutions of mixed halides (Cn)2Pb(X1-yX'y)4 (n = 4-6; X, X' = Cl, Br; 0 ≤ y ≤1) have been prepared and characterized (thermal behavior, powder X-ray diffraction (PXRD), photoluminescence properties). The impact of substitutions is significant on the thermal properties, lowering the Tm down to 100 °C for (C4)2Pb(Br0.25Cl0.75)4. The emission properties are slightly tuned in the case of mixed organic cation systems, whereas modifications are more dramatic in the case of mixed halide systems, leading to emission properties through the entire visible region. These results illustrate the great opportunities offered by the congruent melting properties of halide perovskites allowing syntheses in the molten state.
RESUMO
Copper(I) halides are well-known for their structural diversity and rich photoluminescence properties, showing great potential for the development of solid-state lighting technology. A series of four molecular copper iodide clusters based on the [Cu4I4] cubane geometry is reported. Among them, [Cu8I8] octanuclear clusters of rare geometry resulting from dimerization of the tetranuclear counterparts were also synthesized. Two different phosphine ligands were studied, bearing either a styrene or an ethyl group. Therefore, the effect of the dimerization and of the ligand nature on the photophysical properties of the resulting clusters is investigated. The structural differences were analyzed by single-crystal X-ray diffraction (SCXRD), solid-state nuclear magnetic resonance (NMR), infrared, and Raman analyses. Compared to the ethyl group, the styrene function appears to greatly impact the photophysical properties of the clusters. The luminescence thermochromic properties of the ethyl derivatives and the intriguing photophysical properties of the clusters with styrene function were rationalized by density functional theory (DFT) calculations. Thus, the styrene group significantly lowers in energy the vacant orbitals and consequently affects the global energetic layout of the clusters. From this study, it was found that the nuclearity of copper iodide clusters eventually has less influence on the photophysical properties than the nature of the ligand. The design of proper ligands should therefore be considered when developing materials for specific lighting applications.
RESUMO
A near-infrared-absorbing heptamethine (HM+ ) incorporating three bulky benzo[cd]indole heterocycles was designed to efficiently prevent self-aggregation of the dye, which results in a strong enhancement of its photoinitiating reactivity as compared to a parent bis-benzo[cd]indole heptamethine (HMCl+ ) used as a reference system. In this context, we highlight an efficient free-radical NIR-polymerization up to a 100 % acrylates C=C bonds conversion even under air conditions. Such an important initiating performance was obtained by incorporating our NIR-sensitizer into a three-component system leading to its self-regeneration. This original photoredox cycle was thoroughly investigated through the identification of each intermediary species using EPR spectroscopy.
RESUMO
Copper(I) halides are currently the subject of intensive research because of their rich photophysical properties combined with economic and eco-friendly advantages for practical applications. The molecular copper iodide cluster of the general formula [Cu4I4L4] (L = ligand) is a well-known photoluminescent compound, and the possibility to enlarge the panel of its photophysical properties is studied here, by exploring ligands bearing a distinct emitter. The comparative study of five copper iodide clusters coordinated by different phosphine ligands functionalized by the emissive cyanobiphenyl (CBP) group is thus described in this work. The emissive properties of the ligands have a great impact onto the photophysical properties of the cluster. Compared with classical [Cu4I4L4] copper iodide clusters, the origin of the emission bands is largely modified. The CBP moiety of electron acceptor character significantly lowers in energy the vacant orbitals and consequently affects the global energetic layout. These clusters present dual emission based on two different emissive centers which interplay through energy transfer. This study demonstrates that the design of original ligands is an effective approach to enrich the photophysical properties of the appealing family of copper halide complexes.
RESUMO
Doped single-phase materials have been widely investigated owing to their easy to implement synthesis and the variety of their properties. This Minireview covers strategies for the co-stabilization and the ratio control of several oxidation states of dopants inserted in the same host. The tuning of the oxidation states of dopants opens up many possibilities for the optimization of specific properties and can be envisioned for various applications such as telecommunication, medicine, displays, lasers or lighting. Technics used for the quantification of each valence state of dopant are also emphasized, and the importance of high throughput methods for the discovery of efficient materials with dopants in multiple valence states is discussed.
RESUMO
In solid-state lighting (SSL) applications, hybrid zinc halide phosphors are a promising family because they meet specific criteria such as high color rendering, low cost, and nontoxicity. However, contrary to hybrid lead halide phosphors, their quantum efficiencies are low and the origin of this luminescence remains unclear. To unravel this origin and provide new insights into enhancement of this emission, four hybrid zinc halides have been investigated. These four compounds exhibit similar crystal structures but different photoluminescence properties. We show that photoemission requires the formation of Vk centers, which can be promoted by specific hydrogen bonding. We anticipate that the selection of a specific environment for the zinc halide units could lead to a promising family of low-cost and environmentally friendly phosphors for SSL.
RESUMO
The photoluminescent stimuli-responsive properties of two crystalline polymorphs with the formula (PPh4)2[Cu2I4] are reported. Distinct luminescence properties are exhibited by these ionic copper iodide compounds with blue or yellow emission, and original luminescence thermochromism and mechanochromism are demonstrated. While one polymorph displays contrasted temperature-dependent emission properties, the other shows great modification of its emission upon mechanical solicitation. The establishment of structure-properties relationships, supported by a theoretical approach, permits us to get insights into the origin of the photoluminescence properties and the mechanisms at play. According to DFT calculations, the different emission bands originate either from the (PPh4)+ organic cation or from the [Cu2I4]2- anion. Activation of these two emissive centers appears to be dependent on the crystalline packing of the polymorph. The thermochromism displayed by one polymorph can be attributed to a variation in temperature of the relative intensities of two emission bands of two different excited states. The origin is different for the other polymorph, with emission bands coming from two independent emissive centers: namely, (PPh4)+ and [Cu2I4]2-. The luminescence mechanochromism is attributed to a polymorphic transition. The mechanical solicitation induces a partial transformation of one polymorph into the other within a disordered phase. The mechanochromic mechanism can be related to mechanical modifications of intermolecular interactions between the (PPh4)+ cations. By displaying luminescence properties that depend on crystalline structure, excitation wavelength, temperature, and mechanical solicitation, the studied copper iodides offer a great possibility of emissive color control and switching, a clear demonstration of the great potentialities of this family of compounds for the development of photoactive materials.
RESUMO
In this article, lanthanum molybdenum oxides (La2MoO6 and La2Mo2O9) and their Bi-doped derivatives were investigated as potential rare-earth-free phosphors. An X-ray diffraction analysis coupled with an EDX study confirmed the purity of the samples and the insertion of bismuth in a 1 molar % amount. Kubelka-Munk-transformed reflectance spectra clearly indicated that the insertion of Bi induces a shortening of the optical gap in La2MoO6 but has no impact on that of La2Mo2O9. Moreover, excitation and emission spectra evidenced a strong temperature quenching effect in all materials. Also, the CIEx,y parameters at 77 K are almost identical with or without Bi doping for the two host lattices. Clearly, it was shown, by combining experimental data, ab initio calculations, and the empirical positioning of absorption bands that the luminescence of the Bi-doped La2MoO6 sample is mainly related to the host lattice itself and distortions induced by La/Bi substitution. The role of the Bi3+ dopant is indirect, and the luminescence is mainly due to a Mo-O charge transfer rather than an on-site Bi3+ 3P1,0 â 1S0 transition. Concerning La2Mo2O9, there is no effect following the insertion of Bi, implying that the role of Bi is insignificant.
RESUMO
In the field of stimuli-responsive luminescent materials, mechanochromic compounds exhibiting reversible emission color changes activated by mechanical stimulation present appealing perspectives in sensor applications. The mechanochromic luminescence properties of the molecular cubane copper iodide cluster [Cu4I4[PPh2(C6H4-CH2OH)]4] (1) are reported in this study. This compound can form upon melting an amorphous phase, giving an unprecedented opportunity to investigate the mechanochromism phenomenon. Because the mechanically induced crystalline-to-amorphous transition is only partial, the completely amorphous phase represents the ultimate state of the mechanically altered phase. Furthermore, the studied compound could form two different crystalline polymorphs, namely, [Cu4I4[PPh2(C6H4-CH2OH)]4]·C2H3N (1·CH3CN) and [Cu4I4[PPh2(C6H4-CH2OH)]4]·3C4H8O (1·THF), allowing the establishment of straightforward structure-property relationships. Photophysical and structural characterizations of 1 in different states were performed, and the experimental data were supported by theoretical investigations. Solid-state NMR analysis permitted quantification of the amorphous part in the mechanically altered phase. IR and Raman analysis enabled identification of the spectroscopic signatures of each state. Density functional theory calculations led to assignment of both the NMR characteristics and the vibrational bands. Rationalization of the photoluminescence properties was also conducted, with simulation of the phosphorescence spectra allowing an accurate interpretation of the thermochromic luminescence properties of this family of compounds. The combined study of crystalline polymorphism and the amorphous state allowed us to get deeper into the mechanochromism mechanism that implies changes of the [Cu4I4] cluster core geometry. Through the combination of multistimuli-responsive properties, copper iodide clusters constitute an appealing class of compounds toward original functional materials.
RESUMO
Near-UV-pumped white-light-emitting diodes with ultra-high color rendering and decreased blue-light emission is highly desirable. However, discovering a single-phase white light emitter with such characteristics remains challenging. Herein, we demonstrate that Mn doping as low as 0.027 % in the hybrid post-perovskite type (TDMP)PbBr4 (TDMP=trans-2,5-dimethylpiperaziniium) enables to achieve a bright pure white emission replicating the spectrum of the sun's rays. Thus, a white phosphor exhibiting an emission with CIE coordinates (0.330, 0.365), a high photoluminescence quantum yield of 60 % (new record for white light emission of hybrid lead halides), and an ultra-high color rendering index (CRI=96, R9=91.8), corresponding to the record value for a single phase emitter was obtained. The investigation of the photoluminescence properties revealed how free excitons, self-trapped excitons, and low amount of Mn dopants are coupled to give rise to such pure white emission.
RESUMO
Low-dimensional hybrid lead halides have recently been reported as efficient white light emitters. However, unlike lead halide 3D perovskites, most of the reported low-dimensional materials with broad-band emission crystallize in different structure types according to their halogen composition (i.e., Cl, Br, and I) for a selected organic molecule. Because of the absence of isostructural halide series, the role of chemistry in the self-trapping of the excitons at the origin of the broad-band emission remains unclear. Among the most efficient white phosphors, hybrid lead bromide (TDMP)PbBr4 (TDMP = trans-2,5-dimethylpiperazinium) built of post-perovskite type chains exhibits a record photoluminescence quantum yield for hybrid lead halides. In this article, the two new isostructural (TDMP)PbX4 chloride and iodide analogues could be synthesized and structurally characterized. A comparison of the optical properties of the lead halide series reveals a strong dependence of the nature of the halogen (Cl, Br, or I) on the trapping/detrapping of the excitons and the resulting emission intensities, wavelengths, and band broadness.
RESUMO
Nanostructuration and self-ordering of semiconducting organic materials are required to fabricate highly efficient photovoltaic and photoemissive devices. In this work, we investigated the combined effect of melt-assisted template processing and self-ordering of high purity regio-regular poly (3-hexylthiophene) (P3HT) to obtain nanofibers of P3HT and of P3HT-single-walled carbon nanotubes (SWNT) nanocomposites. An original ordering of the polymer and the carbon nanotubes within the nanofibers, as well as their surprising anisotropic photoluminescent properties were determined by vibrational and optical spectroscopy. It was attributed to the combined effect of the melt-assisted wetting confined within alumina nanopores, altogether with the self-organization of both P3HT chains on the one hand, and of the P3HT charged with SWNT on the other hand. It is proposed that the well-ordered regio-regular P3HT matrix orientation is promoted by the interaction with the alumina pore surface and the 1D confinement. For the composite case, the P3HT matrix imposes additionally a preferential orientation of the SWNT transversal to the nanofiber axis. This original organization is responsible for the unexpected polarization of the composite nanofibers photoluminescence. This work opens the way to alternative methods for tackling challenges of nanofabrication to obtain more efficient optoelectronic nanodevices.
RESUMO
The luminescence properties of Gd3+ or Tb3+ ions at La and Sc sites were investigated in LaScO3 with a distorted perovskite-type structure (ABO3). Although the luminescence of lanthanide ions located at B sites is not common and has not been examined in detail, Gd3+ or Tb3+ luminescence from B sites and A sites is clearly observed in Gd3+- or Tb3+-doped LaScO3. The differences in the luminescence characteristics concern peak positions, peak shapes, and decay time, which are all influenced by the crystal field and the site symmetry. The UV luminescence of Gd3+ at B sites shows a red shift compared to Gd3+ at A sites, and the green luminescence of Tb3+ at B sites contrasts with the blue-violet and green luminescence of Tb3+ at A sites. The decay time of the luminescence from B sites is systematically longer than that from A sites in both the Gd3+ and Tb3+ cases.
RESUMO
Nanoscale molecular clusters are attractive for the design of materials exhibiting original functions and properties. In particular, copper iodide clusters of high nuclearity are well-known for their stimuli-responsive luminescence properties. The synthesis and characterization of an unprecedented copper(I) iodide molecular cluster based on an original heptanuclear inorganic core are reported. This nanometer-size cluster is formulated as [Cu7I7(P(C6H4CF3)3)6(CH3CN)] and its novel structure has been characterized by X-ray diffraction and multinuclear solid-state 63Cu, 31P, 13C, 19F, and 1H NMR spectroscopy. The photoluminescence properties of this cluster have been studied at variable temperature. Density functional theory calculations have been performed on this large molecular structure and allow one to rationalize the observed luminescence properties. This study highlights the crucial role of cuprophilic interactions in molecular copper iodide clusters for exhibiting photoactive properties.
RESUMO
Luminescent materials based on copper complexes are currently receiving increasing attention because of their rich photophysical properties, opening a wide field of applications. The copper iodide clusters formulated [Cu4I4L4] (L = ligand), are particularly relevant for the development of multifunctional materials based on their luminescence stimuli-responsive properties. In this context, controlling and modulating their photophysical properties is crucial and this can only be achieved by thorough understanding of the origin of the optical properties. We thus report here, the comparative study of a series of cubane copper iodide clusters coordinated by different phosphine ligands, with the goal of analyzing the effect of the ligands nature on the photoluminescence properties. The synthesis, structural, and photophysical characterizations along with theoretical investigations of copper iodide clusters with ligands presenting different electronic properties, are described. A method to simplify the analysis of the 31P solid-state NMR spectra is also reported. While clusters with electron-donating groups present classical luminescence properties, the cluster bearing strong electron-withdrawing substituents exhibits original behavior demonstrating a clear influence of the ligands properties. In particular, the electron-withdrawing character induces a decrease in energy of the unoccupied molecular orbitals, that consequently impacts the emission properties. The modification of the luminescence thermochromic properties of the clusters are supported by density functional theory (DFT) calculations. This study demonstrates that the control of the luminescence properties of these compounds can be achieved through modification of the coordinated ligands, nevertheless the role of the crystal packing should not be underestimated.
RESUMO
Herein we report a joint experimental and theoretical investigation on two tetranuclear Cu(I) clusters stabilized by halide ligands. These clusters are of high interest due to their spectroscopic and optical properties, more precisely both clusters exhibit thermochromism. The compounds synthesized by the hydrothermal method have been characterized by single-crystal X-ray diffraction, UV-visible spectroscopy and quantum calculations. Modeled structures have been investigated by means of DFT and TD-DFT methods. Anharmonic computations have been performed to better achieve the vibrational investigation. Computations of the triplet excited states permit us to get more insights into the structure and electronic structure of the excited states responsible for the luminescence properties. Calculations are in agreement with the observed phosphorescence wavelengths.
RESUMO
A strategy to design step by step an inorganic single-doped white phosphor is demonstrated. The method consists in tuning different contributions of the emission by successively controlling the chemical compositions of the solid solution or nanosegregated host matrix and the oxidation states of the single dopant. We use this approach to design a white phosphor Na4CaMgSc4Si10O30:Eu with excellent color rendering (CRI > 90) that is similar to common mixed-phosphor light sources but for a single-phase. We show that this methodology can also be extended to other phosphors for use in diverse applications such as biomedicine or telecommunications.
RESUMO
The physical properties of doped multifunctional compounds are commonly tuned by controlling the amount of dopants, but this control is limited because all the properties are influenced simultaneously by this single parameter. Here, we present a strategy that enables the fine-tuning of a specific combination of properties by controlling the reduction of dopants. The feasibility of this approach was demonstrated by optimizing the near-IR photoluminescence of strontium titanate SrTiO3 :Ni for potential applications in biomedicine for a range of absorbance in the visible/near-IR region. We discussed how material properties, such as luminescence, conductivity, or photocatalytic properties can be designed by carefully controlling the ratio of dopants in different oxidation states.