Establishing and developing a magnetic resonance-guided focused ultrasound program in a resource-limited setting: the Philippine experience.

Magnetic resonance-guided focused ultrasound (MRgFUS) is a non-invasive lesioning technique used to treat movement disorders such as essential tremor (ET), Parkinson's disease (PD), and X-linked dystonia-parkinsonism (XDP). We would like to report our experience in establishing and developing our MRgFUS program and preliminary results. Adult patients with tremor-dominant PD (TDPD), ET, and XDP were considered for initial screening (neurologic evaluation, skull density ratio [SDR] determination). Eligible patients underwent secondary screening (neurosurgical and neuropsychological evaluation, psychiatric and medical clearance). During the procedure, a neuro-anesthesiologist and neurologist were also present to monitor the patient and perform neurologic evaluation, respectively. Clinical follow-up was scheduled at 2 weeks post-treatment, then at every 3 months. A total of 30 patients underwent MRgFUS treatment: 22 TDPD, 6 XDP, and 2 ET. The mean age was 55.7 years, and majority were male (86.7%). Mean disease duration was 8.6 years. Mean SDR was 0.46. The targets for TDPD and ET were the contralateral ventral intermediate nucleus of the thalamus; for XDP, it was the pallidothalamic tract. The mean maximum temperature was 59.8oC; number of sonocations, 7.3; and treatment time, 64.6 min. Majority of patients improved after the procedure. Transient intraprocedural adverse events (headache, dizziness) were reported in 20% of patients while post-procedural events (mild weakness, numbness) were seen in 16.7%. Only 26.7% of patients had follow-up data. Despite the unique challenges encountered, MRgFUS treatment is feasible in resource-limited settings. Additional steps would have to be made to develop and improve the program.

3D printed heterogeneous paediatric head and adult thorax phantoms for linear accelerator radiotherapy quality assurance: from fabrication to treatment delivery.

OBJECTIVE: This study aims to design and fabricate a 3D printed heterogeneous paediatric head phantom and to customize a thorax phantom for radiotherapy dosimetry. Approach: This study designed, fabricated, and tested 3D printed radiotherapy phantoms that can simulate soft tissue, lung, brain, and bone. Various polymers were considered in designing the phantoms. Polylactic acid+, nylon, and plaster were used in simulating different tissue equivalence. Dimensional accuracy, and CT number were investigated. The phantoms were subjected to a complete radiotherapy clinical workflow. Several treatment plans were delivered in both the head and the thorax phantom from a simple single 6 MV beam, parallel opposed beams, and five-field intensity modulated radiotherapy (IMRT) beams. Dose measurements using an ionization chamber and radiochromic films were compared with the calculated doses of the Varian Eclipse treatment planning system (TPS). Main results: The fabricated heterogeneous phantoms represent paediatric human head and adult thorax based on its radiation attenuation and anatomy. The measured CT number ranges are within -786.23 ± 10.55, 0.98 ± 3.86, 129.51 ± 12.83, and 651.14 ± 47.76 HU for lung, water/brain, soft tissue, and bone, respectively. It has a good radiological imaging visual similarity relative to a real human head and thorax depicting soft tissue, lung, bone, and brain. The accumulated dose readings for both conformal radiotherapy and IMRT match with the TPS calculated dose within ±2% and ±4% for head and thorax phantom, respectively. The mean pass rate for all the plans delivered are above 90% for gamma analysis criterion of 3% / 3 mm. Significance and conclusion: The fabricated heterogeneous paediatric head and thorax phantoms are useful in Linac end-to-end radiotherapy quality assurance based on its CT image and measured radiation dose. The manufacturing and dosimetry workflow of this study can be utilized by other institutions for dosimetry and trainings. .