RESUMO
The main objective of this paper is to demonstrate the importance of applying dynamic modelling and real energy prices on a full scale water resource recovery facility (WRRF) for the evaluation of control strategies in terms of energy costs with aeration. The Activated Sludge Model No. 1 (ASM1) was coupled with real energy pricing and a power consumption model and applied as a dynamic simulation case study. The model calibration is based on the STOWA protocol. The case study investigates the importance of providing real energy pricing comparing (i) real energy pricing, (ii) weighted arithmetic mean energy pricing and (iii) arithmetic mean energy pricing. The operational strategies evaluated were (i) old versus new air diffusers, (ii) different DO set-points and (iii) implementation of a carbon removal controller based on nitrate sensor readings. The application in a full scale WRRF of the ASM1 model coupled with real energy costs was successful. Dynamic modelling with real energy pricing instead of constant energy pricing enables the wastewater utility to optimize energy consumption according to the real energy price structure. Specific energy cost allows the identification of time periods with potential for linking WRRF with the electric grid to optimize the treatment costs, satisfying operational goals.
Assuntos
Conservação de Recursos Energéticos/economia , Instalações de Eliminação de Resíduos/economia , Eliminação de Resíduos Líquidos/economia , Águas Residuárias/química , Águas Residuárias/economia , Recursos Hídricos , Difusão , Modelos Econômicos , Esgotos/química , Purificação da Água/economiaRESUMO
Many national and regional administrations are currently facing challenges to ensure long-term sustainability of urban water services, as infrastructures continue to accumulate alarming levels of deferred maintenance and rehabilitation. The infrastructure value index (IVI) has proven to be an effective tool to support long-term planning, in particular by facilitating the ability to communicate and to create awareness. It is given by the ratio between current value of an infrastructure and its replacement cost. Current value is commonly estimated according to an asset-oriented approach, which is based on the concept of useful life of individual components. The standard values assumed for the useful lives can vary significantly, which leads to valuations that are just as different. Furthermore, with water companies increasingly focused on the customer, effective service-centric asset management is essential now more than ever. This paper shows results of on-going research work, which aims to explore a service-oriented approach for assessing the IVI. The paper presents the fundamentals underlying this approach, discusses and compares results obtained from both perspectives and points to challenges that still need to be addressed.
Assuntos
Eliminação de Resíduos Líquidos/economia , Purificação da Água/economia , Abastecimento de Água/economia , Eliminação de Resíduos Líquidos/instrumentação , Purificação da Água/instrumentaçãoRESUMO
Managing combined sewage systems in large cities discharging to coastal waters, often bearing recreational activities, remains a challenge. Studying the impacts of such discharges requires the development of specific models. Hydrodynamic and water quality modelling of coastal waters employs numerical methods and algorithms, leading to the design of complex models which require expert use. The use of such models as decision support tools to simulate discharge impacts and define adequate corrective measures could represent a key part in meeting this challenge. In this paper, the authors describe the work undertaken to develop an operational decision support system (ODSS) methodology aiming to enable wastewater utilities' non-expert staff to carry out user-friendly scenario analysis based on computational fluid dynamics simulations. This article depicts the application and validation of the ODSS to the combined sewage system and the Tagus estuary of the city of Lisbon in Portugal. The ODSS was used for simulating the effects in the receiving coastal waters of a discharge caused by a scheduled maintenance operation in the sewage infrastructure. Results show that the use of such ODSS by non-expert staff increases their decision capabilities and knowledge of the wastewater utility's contribution to reducing negative impacts of sewage discharges on the receiving water bodies.
Assuntos
Técnicas de Apoio para a Decisão , Drenagem Sanitária , Modelos Teóricos , Esgotos/estatística & dados numéricos , Cidades , Estuários , PortugalRESUMO
Odor nuisance and sulfide corrosion in sewers carrying septic wastewater are accelerated at points of turbulence such as drops in manholes, but accurate methods or empirical expressions to evaluate the gas stripping rate at those particular sites are still missing. With the aim of improving the current knowledge on the influence of free-fall drops on the release of hydrogen sulfide gas, an experimental set-up was built allowing different free-fall drops heights and flows. Three types of experiments were carried out: reaeration tests without sulfide; sulfide oxidation tests; and hydrogen sulfide release tests. With the increase of the free-fall drop height or of the flow, a higher rate of air-to-water mass oxygen transfer was observed. Results regarding sulfide oxidation tests with reaeration through the free-fall have shown that the oxidation rate was correlated with flow. In the hydrogen sulfide release tests, the maximum concentration in the atmosphere reached 500 ppm. Results also showed that increasing the flow rate decreased the time at which the maximum concentrations in the atmosphere were observed.
Assuntos
Sulfeto de Hidrogênio/química , Eliminação de Resíduos Líquidos/métodos , OxirreduçãoRESUMO
The use of constructed wetlands as a valuable and attractive method for combined sewer overflow (CSO) treatment has been demonstrated in several studies. In Portugal, a Mediterranean country having usually a long dry period, there are still no applications of this technology. The purpose of this research is to gather information and know-how required for the design and management of this type of infrastructure. A pilot-scale experimental setup for CSO treatment was installed and evaluated in situ, in terms of organic matter, total suspended solids and microorganism removal with emphasis on the results of the start-up. After 1 day of retention average removal efficiencies of 73-79% and 82-89% were obtained in terms of chemical oxygen demand (COD) and total suspended solids (TSS), respectively. During the remaining retention time a slower removal was observed. After 7 days, the COD removal efficiencies reached 86-91% and the TSS removal efficiencies reached 93-97%. On average, after 1 day, reductions of 1.2-2.0 log and 1.9-2.4 log, respectively, for total coliforms and Enterococcus were observed. For a retention time of 7 days these reductions attained 4.0-4.9 log and 4.4-5.3 log, respectively.
Assuntos
Engenharia Sanitária/métodos , Esgotos , Eliminação de Resíduos Líquidos/métodos , Áreas Alagadas , Região do Mediterrâneo , Projetos Piloto , Portugal , Fatores de Tempo , Poluentes da ÁguaRESUMO
Lead time between rainfall prediction results and flood prediction results obtained by hydraulic simulations is one of the crucial factors in the implementation of real-time flood forecasting systems. Therefore, hydraulic simulation times must be as short as possible, with sufficient spatial and temporal flood distribution modelling accuracy. One of the ways to reduce the time required to run hydraulic model simulations is increasing computational speed by simplifying the model networks. This simplification can be conducted by removing and changing some secondary elements using network simplification techniques. The emphasis of this paper is to assess how the level of urban drainage network simplification influences the computational time and overall simulation results' accuracy. The models used in this paper comprise a sewer network and an overland flow drainage system in both 1D/1D and 1D/2D approaches. The 1D/1D model is used as the reference model to generate several models with different levels of simplifications. The results presented in this paper suggest that the 1D/2D models are not yet suitable to be used in real-time flood prediction applications due to long simulation time, while on the other hand, the simplified 1D/1D models show that considerable reductions in simulation time can be achieved without compromising simulation results (flow and water depth) accuracy.
Assuntos
Cidades , Drenagem Sanitária/métodos , Modelos Teóricos , Chuva , Simulação por Computador , Conservação dos Recursos Naturais , Inundações , Previsões/métodos , Portugal , Movimentos da ÁguaRESUMO
The current proposal for a revised European Directive concerning the quality of bathing water significantly increases the demands for the control of wet-weather discharges. A densely urbanised combined catchment was modelled for a 19-year long rainfall series in order to assess the current situation and to evaluate the benefits of potential solutions. Storage and advanced physical-chemical treatment of stormwater in the STP may significantly contribute for the reduction of the overflow volumes but reductions of the spill frequency under 2.5 spill days per bathing season are hardly obtained. This study reveals the severe strains that the local rainfall pattern may place on the control of the frequency of wet-weather discharges, pointing to serious technical, social and economical implications, at the local and at the national level, if the current proposal for a revised European Directive on Bathing Water is enforced.
Assuntos
Esgotos , Eliminação de Resíduos Líquidos/métodos , Poluição da Água/prevenção & controle , Cidades , Humanos , Modelos Teóricos , Portugal , Saúde Pública , Controle de Qualidade , Chuva , Natação , Abastecimento de Água/normasRESUMO
Wet weather urban discharges are responsible for bathing water contamination. The proposal for a revised EU Directive concerning the quality of bathing water imposes significantly more stringent requirements for the management of bathing water quality, with particularly important repercussions on beaches subjected to short-term pollution incidents. The paper reviews the aspects from EU legislation most directly related to the problem of wet-weather discharges, placing special emphasis on the recent revision process of the Directive on bathing water quality, and evaluates the benefits of some potential solutions based on continuous modelling of a combined sewer system. Increasing the sewer system storage capacity or the STP hydraulic capacity may substantially reduce the untreated discharge volumes, but spill frequency reductions under 2 to 3 spill days per bathing season will hardly be achieved. Results show the severe strains that local rainfall patterns would place on compliance with the Commission's proposal for a revised Directive and highlight the importance of the changes introduced in the amended proposal recently approved by the Council, making it less prescriptive if adequate measures are adopted to prevent bathers' exposure to short-term pollution incidents.
Assuntos
Banhos/normas , Chuva , Abastecimento de Água/normas , Água/química , Cidades , Enterococcus/isolamento & purificação , Enterococcus/fisiologia , Escherichia coli/isolamento & purificação , Escherichia coli/fisiologia , Europa (Continente) , Estações do Ano , Microbiologia da Água , Poluição da ÁguaRESUMO
This paper presents the contributions of Geographic Information Systems (GIS) and location models towards planning regional wastewater systems (sewers and wastewater treatment plants) serving small agglomerations, i.e. agglomerations with less than 2,000 inhabitants. The main goal was to develop a decision support tool for tracing and locating regional wastewater systems. The main results of the model are expressed in terms of number, capacity and location of Wastewater Treatment Plants (WWTP) and the length of main sewers. The decision process concerning the location and capacity of wastewater systems has a number of parameters that can be optimized. These parameters include the total sewer length and number, capacity and location of WWTP. The optimization of parameters should lead to the minimization of construction and operation costs of the integrated system. Location models have been considered as tools for decision support, mainly when a geo-referenced database can be used. In these cases, the GIS may represent an important role for the analysis of data and results especially in the preliminary stage of planning and design. After selecting the spatial location model and the heuristics, two greedy algorithms were implemented in Visual Basic for Applications on the ArcGIS software environment. To illustrate the application of these algorithms a case study was developed, in a rural area located in the central part of Portugal.
Assuntos
Sistemas de Informação Geográfica , Eliminação de Resíduos Líquidos/métodos , Algoritmos , Drenagem Sanitária/métodos , Modelos Teóricos , Técnicas de Planejamento , Portugal , Eliminação de Resíduos Líquidos/economiaRESUMO
Atmospheric concentrations of volatile organic compounds were measured at two rural sites in central Portugal. The sites were chosen to be in line with the summer northwesterly sea breezes in order to study the evolution of the chemical composition of air masses during transport to inland areas. The most abundant non-oxygenated hydrocarbon in the ambient air was isoprene and the monoterpenes alpha-pinene, beta-pinene and 1,8 cineol. The maximum isoprene levels (6-7 ppb) were recorded at the most inland site, suggesting an enrichment of coastal air masses with biogenic emissions during transport over eucalyptus forests. Formaldehyde was the most prominent carbonyl compound in the atmosphere but acetaldehyde and acrolein were also abundant. Concentrations of carbonyl compounds had a tendency to be higher inland, particularly for glyoxal, methyl glyoxal, methyl vinyl ketone, metacrolein and pentanal. The observed increases indicate that carbonyls were produced by photochemical oxidation of biogenic hydrocarbons in aged air masses with coastal origin. Isoprene, monoterpenes and various carbonyls exhibited pronounced diurnal variations, which are explained on the basis of emissions from vegetation, oxidation pathways of biogenic hydrocarbons and meteorological conditions.
Assuntos
Monitoramento Ambiental , Hidrocarbonetos/análise , Agricultura , Plantas , Portugal , VolatilizaçãoRESUMO
The construction of conventional sewerage systems in small communities, with pipes laid on a uniform slope and manholes regularly spaced, is sometimes not economically feasible, because of the high costs of sewer installation. Under those circumstances, the small diameter gravity sewers (SDGS) have often proven to be substantially less costly than conventional sewers. Typically, in SDGS systems the wastewater from one or more households is discharged into an interceptor tank (or a single compartment septic tank). The settled effluent is discharged afterwards into small diameter sewers operating under gravity. In this paper, special emphasis is given to the analysis of self-cleansing conditions and to the analysis of risks of sulphide generation and occurrence of septic conditions in SDGS systems. For the evaluation of the self-cleansing conditions, the critical velocity and the critical shear stress were computed according to the Shields equation. The forecasting of dissolved oxygen concentrations and sulphide build-up along the lines, for different flow conditions, was done running an established wastewater quality model.
Assuntos
Eliminação de Resíduos/instrumentação , Esgotos , Poluição da Água/prevenção & controle , Desenho de Equipamento , Oxigênio/análise , Solubilidade , Sulfetos/análiseRESUMO
The sewer is a reactor for chemical and microbial transformations of wastewater. These in-sewer processes affect the quality of the wastewater and thereby the sewer itself, the subsequent treatment and the receiving water quality. The paper focuses on the interactions between the dry weather in-sewer chemical and microbial transformations of the wastewater and the corresponding processes in a downstream located treatment plant. A conceptual understanding of the sewer processes is crucial in this respect.
Assuntos
Esgotos , Eliminação de Resíduos Líquidos , Microbiologia da Água , Reatores Biológicos , Conceitos Meteorológicos , Movimentos da ÁguaRESUMO
The aim of this document is to present and discuss the results of the experimental work undertaken in Laje stream, in a section near the village of Oeiras in Portugal. The work was developed with the main objective of characterising stormwater quality in Portuguese drainage systems, and to predict the effects of the performance of partially separate sewer systems on receiving waters. For this purpose, volume and characteristics of stormwater carried by a partially separated sewer system were estimated, both in terms of flow and Chemical Oxygen Demand (COD) loads. The study also analyses the eventual implementation of non-conventional solutions, as a way of reducing problems of bacteriological contamination of seawaters. This aspect is particularly important in Portugal, where the population is mainly concentrated in urban areas located down-stream of important drainage basins, close to the coastline. Therefore, sanitary sewer overflows discharging directly into receiving waters are frequent, with possible consequences in terms of bacteriological contamination of bathing areas. Based on experimental research and available data it was possible to collect informations regarding stormwater average COD and overflow coliform loads, and the occurrence of first flush effects.
Assuntos
Esgotos , Eliminação de Resíduos Líquidos , Poluição da Água/prevenção & controle , Cidades , Monitoramento Ambiental , Portugal , Chuva , Movimentos da Água , Abastecimento de ÁguaRESUMO
The efficacy of Baird-Parker agar, Baird-Parker agar with bacitracin (0.8 µg/ml), Baird-Parker agar supplemented with acriflavin (7 µg/ml), polymyxin (20 units/ml) and sulphonamides (55 µg/ml), KRANEP agar, mannitol salt agar, and Staphylococcus medium 110 agar for the isolation and enumeration of Staphylococcus species was investigated. Bovine blood agar was used as the control medium. Thirty-seven staphylococci strains representing 23 species and 19 non- Staphylococcus species were tested. None of the six selective media supported the growth of all 37 Staphylococcus strains. The number of Staphylococcus species that grew on a specific medium ranged from only the S. aureus strains on Baird-Parker agar supplemented with acriflavin, polymyxin, and sulphonamides, to all but S. warneri BG 647 on Staphylococcus medium 110 agar. Strains of Bacillus , Corynebacterium , and Micrococcus grew on all six selective media.
RESUMO
The body sites of 163 heifers, bedding and feedstuff samples, flies, and hands and nares of the research personnel were sampled in order to determine the sources of Staphylococcus aureus in a dairy herd other than the lactating mammary gland. Lesions on the udder of lactating animals and the air in the milking parlor were also sampled. Staphylococci isolated from bedding samples were identified as to species. Staphylococcus aureus was isolated from all sources examined except flies. An enrichment procedure was necessary for isolating S. aureus from two bedding samples although other Staphylococcus species were present in high numbers. The designation "environmental staphylococci" is proposed for Staphylococcus species that were apparently free-living in the environment.