RESUMO
Electrochemical and chemical studies reveal that the amido complex (PNHxP)Fe(CO)(H)(X) (FeN 1, x = 0, X = 0; Fe(H)(NH) 2, x = 1, X = H; PNHP = bis[2-(diisopropylphosphino)ethyl]amine) is active for the electrocatalytic oxidation of isopropanol. At room temperature, the amido FeN 1 dehydrogenates isopropanol to form acetone. The resulting amino hydride complex Fe(H)(NH) 2 is subsequently oxidized by one electron at a low potential (-0.74 V versus ferrocene/ferrocenium, Fc0/+) in tetrahydrofuran. In the presence of strong base (phosphazene base P2-Et, Et-N = P2(dma)5, P2), this oxidation process becomes a two-electron, two-proton process that regenerates FeN 1. FeN 1 is active for the electrooxidation of isopropanol in the presence of strong base (i.e., P2) with an onset potential near -1 V versus Fc0/+. By cyclic voltammetry, fast turnover frequencies of 1.7 s-1 for isopropanol oxidation are achieved with FeN 1. Controlled potential electrolysis studies confirm that the product of isopropanol electrooxidation is acetone, generated with high Faradaic efficiency (â¼100%).
RESUMO
The synthesis, structural characterization, and electrochemical behavior of the neutral Mn(azpy)(CO)3(Br) 4 (azpy = 2-phenylazopyridine) complex is reported and compared with its structural analogue Mn(bipy)(CO)3(Br) 1 (bipy = 2,2'-bipyridine). 4 exhibits reversible two-electron reduction at a mild potential (-0.93 V vs Fc+/0 in acetonitrile) in contrast to 1, which exhibits two sequential one-electron reductions at -1.68 V and -1.89 V vs Fc+/0 in acetonitrile. The key electronic structure differences between 1 and 4 that lead to disparate electrochemical properties are investigated using a combination of Mn-K-edge X-ray absorption spectroscopy (XAS), Mn-Kß X-ray emission spectroscopy (XES), and density functional theory (DFT) on 1, 4, their debrominated analogues, [Mn(L)(CO)3(CH3CN)][CF3SO3] (L = bipy 2, azpy 5), and two-electron reduced counterparts [Mn(bipy)(CO)3][K(18-crown-6)] 3 and [Mn(azpy)(CO)3][Cp2Co] 6. The results reveal differences in the distribution of electrons about the CO and bidentate ligands (bipy and azpy), particularly upon formation of the highly reduced, formally Mn(-1) species. The data show that the degree of ligand noninnocence and resulting redox-activity in Mn(L)(CO)3 type complexes impacts not only the reducing power of such systems, but the speciation of the reduced complexes via perturbation of the monomer-dimer equilibrium in the singly reduced Mn(0) state. This study highlights the role of redox-active ligands in tuning the reactivity of metal centers involved in electrocatalytic transformations.
RESUMO
We report the reactivity of copper azobispyridine (abpy) metallopolymers with nitrogen dioxide (NO2). The porous and conductive [Cu(abpy)]n mixed-valence metallopolymers undergo a redox reaction with NO2, resulting in the disproportionation of NO2 gas. Solid- and gas-phase vibrational spectroscopy and X-ray analysis of the reaction products of the NO2-dosed metallopolymer show evidence of nitrate ions and nitric oxide gas. Exposure to NO2 results in complete loss of porosity and a decrease in the room-temperature conductivity of the metallopolymer by four orders of magnitude with the loss of mixed-valence character. Notably, the porous and conductive [Cu(abpy)]n metallopolymers can be reformed by reducing the Cu-nitrate species.
RESUMO
Substrate selectivity in reductive multielectron/proton catalysis with small molecules such as N2, CO2, and O2 is a major challenge for catalyst design, especially where the competing hydrogen evolution reaction (HER) is thermodynamically and kinetically competent. In this study, we investigate how the selectivity of a tris(phosphine)borane iron(I) catalyst, P3BFe+, for catalyzing the nitrogen reduction reaction (N2RR, N2-to-NH3 conversion) versus HER changes as a function of acid p Ka. We find that there is a strong correlation between p Ka and N2RR efficiency. Stoichiometric studies indicate that the anilinium triflate acids employed are only compatible with the formation of early stage intermediates of N2 reduction (e.g., Fe(NNH) or Fe(NNH2)) in the presence of the metallocene reductant Cp*2Co. This suggests that the interaction of acid and reductant is playing a critical role in N-H bond-forming reactions. DFT studies identify a protonated metallocene species as a strong PCET donor and suggest that it should be capable of forming the early stage N-H bonds critical for N2RR. Furthermore, DFT studies also suggest that the observed p Ka effect on N2RR efficiency is attributable to the rate and thermodynamics of Cp*2Co protonation by the different anilinium acids. Inclusion of Cp*2Co+ as a cocatalyst in controlled potential electrolysis experiments leads to improved yields of NH3. The data presented provide what is to our knowledge the first unambiguous demonstration of electrocatalytic nitrogen fixation by a molecular catalyst (up to 6.7 equiv of NH3 per Fe at -2.1 V vs Fc+/0).
Assuntos
Técnicas Eletroquímicas , Compostos de Ferro/química , Nitrogênio/química , Compostos Organometálicos/química , Catálise , Concentração de Íons de Hidrogênio , Conformação Molecular , Teoria QuânticaRESUMO
We present a dedicated end-station for solution phase high repetition rate (MHz) picosecond hard x-ray spectroscopy at beamline 15-2 of the Stanford Synchrotron Radiation Lightsource. A high-power ultrafast ytterbium-doped fiber laser is used to photoexcite the samples at a repetition rate of 640 kHz, while the data acquisition operates at the 1.28 MHz repetition rate of the storage ring recording data in an alternating on-off mode. The time-resolved x-ray measurements are enabled via gating the x-ray detectors with the 20 mA/70 ps camshaft bunch of SPEAR3, a mode available during the routine operations of the Stanford Synchrotron Radiation Lightsource. As a benchmark study, aiming to demonstrate the advantageous capabilities of this end-station, we have conducted picosecond Fe K-edge x-ray absorption spectroscopy on aqueous [FeII(phen)3]2+, a prototypical spin crossover complex that undergoes light-induced excited spin state trapping forming an electronic excited state with a 0.6-0.7 ns lifetime. In addition, we report transient Fe Kß main line and valence-to-core x-ray emission spectra, showing a unique detection sensitivity and an excellent agreement with model spectra and density functional theory calculations, respectively. Notably, the achieved signal-to-noise ratio, the overall performance, and the routine availability of the developed end-station have enabled a systematic time-resolved science program using the monochromatic beam at the Stanford Synchrotron Radiation Lightsource.
RESUMO
Iron(III) meso-tetra(2-carboxyphenyl)porphine chloride (1) was investigated as a soluble electrocatalyst for the oxygen reduction reaction (ORR) in acetonitrile with [H(DMF)(+)]OTf(-). Rotating ring-disk voltammetry, spectroelectrochemistry, and independent reactions with hydrogen peroxide indicate that 1 has very high selectivity for reduction of O(2) to H(2)O, without forming significant amounts of H(2)O(2). Cyclic voltammetric measurements at high substrate/catalyst ratios (high oxygen pressure) allowed the estimation of a turnover frequency (TOF) of 200 s(-1) at -0.4 V vs Cp(2)Fe(+/0). This is, to our knowledge, the first reported TOF for a soluble ORR electrocatalyst under kinetically controlled conditions. The 4-carboxyphenyl isomer of 1, in which the carboxylic acids point away from the iron center, is a much less selective catalyst. This comparison shows that carboxylate groups positioned to act as proton delivery relays can substantially enhance the selectivity of ORR catalysis.
RESUMO
A combination of Pt L3-edge X-ray absorption spectroscopy (EXAFS and XANES) and DFT (TPSS) calculations have been performed on powder samples of the archetypal platinum porphyrinoid complexes PtII[TpCF3PP], PtIV[TpCF3PP]Cl2, and PtIV[TpCF3PC](Ar)(py), where TpCF3PP2- = meso-tetrakis(p-trifluoromethylphenyl)porphyrinato and TpCF3PC3- = meso-tris(p-trifluoromethylphenyl)corrolato. The three complexes yielded Pt L3-edge energies of 11 566.0 eV, 11 567.2 eV, and 11 567.6 eV, respectively. The 1.2 eV blueshift from the Pt(ii) to the Pt(iv) porphyrin derivative is smaller than expected for a formal two-electron oxidation of the metal center. A rationale was provided by DFT-based Hirshfeld which showed that the porphyrin ligand in the Pt(iv) complex is actually substantially oxidized relative to that in the Pt(ii) complex. The much smaller blueshift of 0.4 eV, going from PtIV[TpCF3PP]Cl2, and PtIV[TpCF3PC](Ar)(py), is ascribable to the significantly stronger ligand field in the latter compound.
RESUMO
[This corrects the article DOI: 10.1039/D1RA06151H.].
RESUMO
Mitigation of the hydrogen evolution reaction (HER) is a key challenge in selective small molecule reduction catalysis. This is especially true of catalytic nitrogen (N2) and carbon dioxide (CO2) reduction reactions (N2RR and CO2RR, respectively) using H+/e- currency. Here we explore, via DFT calculations, three iron model systems, P3 EFe (E = B, Si, C), known to mediate both N2RR and HER, but with different selectivity depending on the identity of the auxiliary ligand. It is suggested that the respective efficiencies of these systems for N2RR trend with the predicted N-H bonds strengths of two putative hydrazido intermediates of the proposed catalytic cycle, P3 EFe(NNH2)+ and P3 EFe(NNH2). Further, a mechanism is presented for undesired HER consistent with DFT studies, and previously reported experimental data, for these systems; bimolecular proton-coupled-electron-transfer (PCET) from intermediates with weak N-H bonds is posited as an important source of H2' instead of more traditional scenarios that proceed via metal hydride intermediates and proton transfer/electron transfer (PT/ET) pathways. Wiberg bond indices provide additional insight into key factors related to the degree of stabilization of P3 EFe(NNH2) species, factors that trend with overall product selectivity.
RESUMO
We have recently reported on several Fe catalysts for N2-to-NH3 conversion that operate at low temperature (-78 °C) and atmospheric pressure while relying on a very strong reductant (KC8) and acid ([H(OEt2)2][BArF4]). Here we show that our original catalyst system, P3BFe, achieves both significantly improved efficiency for NH3 formation (up to 72% for e- delivery) and a comparatively high turnover number for a synthetic molecular Fe catalyst (84 equiv of NH3 per Fe site), when employing a significantly weaker combination of reductant (Cp*2Co) and acid ([Ph2NH2][OTf] or [PhNH3][OTf]). Relative to the previously reported catalysis, freeze-quench Mössbauer spectroscopy under turnover conditions suggests a change in the rate of key elementary steps; formation of a previously characterized off-path borohydrido-hydrido resting state is also suppressed. Theoretical and experimental studies are presented that highlight the possibility of protonated metallocenes as discrete PCET reagents under the present (and related) catalytic conditions, offering a plausible rationale for the increased efficiency at reduced driving force of this Fe catalyst system.
RESUMO
Fe(III)-meso-tetra(pyridyl)porphyrins are electrocatalysts for the reduction of dioxygen in aqueous acidic solution. The 2-pyridyl derivatives, both the triflate and chloride salts, are more selective for the desired 4e(-) reduction than the isomeric 4-pyridyl complexes. The inward-pointing pyridinium groups influence proton delivery despite their distance from the iron centre.