Effect of chlorhexidine mouthwashes on periodontal parameters and extrinsic tooth staining in orthodontic patients.

INTRODUCTION: Periodontal health and biofilm control are primordial to success in orthodontic treatment. This study aimed to evaluate the effect of chlorhexidine (CHX) mouthwashes on periodontal status and extrinsic tooth staining in orthodontic patients. METHODS: Thirty-three patients of both sexes, aged 11-33 years, under orthodontic treatment with fixed appliances at <16 months, were randomly distributed into 2 groups. In the control group, patients received mechanical hygiene instruction, and in the experimental group, patients also used CHX wash twice a week for 60 days. The effectivity of the protocols was evaluated using the plaque, gingival, gingival bleeding, and discoloration indexes before the hygiene protocol was applied, 15, 30, and 60 days after protocol implementation. RESULTS: In the experimental group, there was a decrease in the plaque, gingival, and gingival bleeding indexes at the different evaluation periods (P <0.05). In addition, there was a significant difference in the discoloration index at 60 days compared with initial time points after implementing hygiene protocols in the experimental group (P <0.05). In contrast, there were no significant differences in plaque, gingival, gingival bleeding, and discoloration indexes in the control group at any time (P >0.05). CONCLUSIONS: CHX mouthwash administered 30 days, twice a week, significantly improved the periodontal status with mild brown staining. After this period, expressive extrinsic tooth staining was observed.

Low-level laser therapy (LLLT) improves alveolar bone healing in rats.

The main objective of the present study was to evaluate the effect of low-level laser therapy (LLLT) in enhancing bone healing in irradiated alveolus post-tooth extraction. Sixty male Wistar rats (180 ± 10 g) were used in the present study. The left maxillary first molars were extracted, and the alveolar region was irradiated by diode laser device (GaAlAs) immediately after extraction and for more 3-day daily applications. The animals were randomly assigned into two groups: control group (n = 30, with left maxillary molar extraction-CG) and experimental group (n = 30, with tooth extraction and low-level laser therapy applied to the dental alveolus for 42 s-EG). These groups were divided into subgroups (five rats per subgroup) according to the observation time point-1, 2, 3, 5, 7, and 10 days-post-tooth extraction. The maxillary bone was separated, and the specimens were stained with hematoxylin and eosin, Masson's trichrome, and picrosirius red and immunohistochemistry for RUNX-2. Parametric and nonparametric tests were used with a significance level of 5%. LLLT accelerated bone healing with mature collagen fiber bundles and early new bone formation. Histomorphometric analysis revealed an increase of osteoblast (RUNX-2) and osteoclast (TRAP) activity and in the area percentage of cancellous bone in the lased alveolus compared to the control group. This increase was statistically significant (p < 0.05). Application of LLLT with a GaAlAs diode laser device enhanced bone healing and mineralization on alveolar region.

Photobiomodulation impacts the levels of inflammatory mediators during orthodontic tooth movement? A systematic review with meta-analysis.

During orthodontic tooth movement (OTM), there is the release of cytokines in the gingival crevicular fluid (GCF) that are supposed to participate in the bone remodeling. This systematic review aimed at assessing the effects of photobiomodulation (PBM) on the levels of these cytokines during OTM. This systematic review according to Cochrane Collaboration guidelines aimed to answer the clinical question following the PICOS strategy. The broad search in the literature was performed before 05 April, 2021 in six electronic databases (Pubmed, Web of Science, Scopus, Embase, Cochrane, Biblioteca Virtual de Saúde) and supplemented by the grey literature. The risk of bias of randomized and non-randomized clinical trials was evaluated by two tools: RoB 2 and ROBINS-I. Mean and standard deviation of cytokine levels was extracted to meta-analysis, and the GRADE system was applied to assess the quality of the evidence. Nine studies were included in this review. Low-level laser therapy (LLLT) was the photobiomodulation type used in most of the studies (n = 8). The wavelengths used varied from 618 to 980 nm and also differed concerning the light emission pattern. LLLT increased the levels of IL-1ß, IL-8, OPN, and PGE2, but not TNF-α1, TGF-ß1. The levels of IL6, RANKL, and OPG presented conflicting results. LLLT was statistically associated with an increase of IL-1ß levels (standard mean difference [SMD] = 1.99; 95% confidence interval = 0.66 to 3.33; p < 0.001) with low certainty of evidence. LLLT may increase the levels of IL-1ß and other cytokines; however, the results should be interpreted with caution due to protocol variations between studies, and the few studies added in the meta-analysis.

Self-ligating brackets exhibit accumulation of high levels of periodontopathogens in gingival crevicular fluid.

Different types of brackets seem to influence the disruption of the oral microbial environment. Therefore, the aim of this study was to evaluate the influence of self-ligating brackets on the gingival crevicular fluid levels of the putative periodontal pathogens Aggregatibacter actinomycetemcomitans sorotype a (Aaa), Tannerella forsythia, Fusobacterium nucleatum, and Porphyromonas gingivalis. Sixty samples of crevicular fluid of twenty patients (11 boys and 9 girls) were analysed at baseline (T0) and after 30 (T1) and 60 (T2) days of bonding of the self-ligating (In-Ovation®R, Dentsply, GAC or SmartClip™, 3 M Unitek, Monrovia, CA, USA) and of one conventional bracket (Gemini™, 3 M Unitek, Monrovia, CA, USA) used with elastomeric ligatures. Total DNA from samples was extracted using CTAB-DNA precipitation method and Real-time PCR was performed to analyse bacterial level. Non-parametric Friedman and Wilcoxon tests were used for data analysis (p value of < 0.05). F. nucleatum presented a different level among the different brackets at T1 (p = 0.025), the highest level in the Gemini™ bracket when compared to the SmartClip™ bracket (p = 0.043). P. ginigvalis levels increased in the In-Ovation®R (p = 0.028) at T1. The subgingival levels of bacterial species associated with periodontal disease P. ginigvalis increased in the self-ligating brackets In-Ovation®R.Clinical Relevance: Some kinds of brackets could provide more retentive sites than others, and it seems to modulate the subgingival microbiota, since, in this study, we could observe the increase of the species associated with periodontal disease. Preventive protocols should be adopted in the use of self-ligating brackets.

The effect of whitening toothpastes on polyurethane and silicone orthodontic clear ligatures: A clinical study.

BACKGROUND: This study aimed to verify the effects of bleaching toothpaste on colour stability, elastic properties, surface topography between aesthetic polyurethane and silicone elastomeric ligatures from different brands. METHODS: Elastomeric ligatures tested were: 1-Mini Single Case Ligature Stick (RMO-polyurethane); 2-Ligature "S" Shaped Dispenser (RMO-Silicone); 3-Sany-tie (GAC-translucent polyurethane); and 4-Sili-tie (GAC-translucent silicone). The ligatures were randomly assigned from the brackets of canines and lower incisors of 40 patients. The study had two phases of 30 days in which a different toothpaste was used, followed by a washout period of 30 days. After each phase, ligatures were submitted to colour checking, tensile strength, and SEM. RESULTS: The average of the ultimate tensile strength (m = 2.59; DP = 0.014) was higher in the control ligatures if compared to the tested ones (m = 2.24; DP = 0.014). There were no statistically significant differences between toothpastes regarding the type of ligature. Also, no interaction was observed between toothpastes in ligature's ultimate tensile strength and strain. The type of toothpaste did not minimize colour changes. CONCLUSION: In conclusion, there was no difference in colour stability and elastic properties between polyurethane or silicone aesthetic elastomeric modules. Whitening toothpastes had no impact on ligatures performance after 30 days in the oral cavity.

Potential interactions among single nucleotide polymorphisms in bone- and cartilage-related genes in skeletal malocclusions.

OBJECTIVE: To investigate SNPs in bone- and cartilage-related genes and their interaction in the aetiology of sagittal and vertical skeletal malocclusions. SETTINGS AND SAMPLE POPULATION: This study included 143 patients and classified as follows: skeletal class I (n = 77), class II (n = 47) and class III (n = 19); maxillary retrusion (n = 39), protrusion (n = 52) and well-positioned maxilla (n = 52); mandibular retrognathism (n = 50), prognathism (n = 50) and well-positioned mandible (n = 43); normofacial (n = 72), dolichofacial (n = 55) and brachyfacial (n = 16). MATERIALS AND METHODS: Steiner's ANB, SNA, SNB angles and Ricketts' NBa-PtGn angle were measured to determine the skeletal malocclusion and the vertical pattern. Nine SNPs in BMP2, BMP4, SMAD6, RUNX2, WNT3A and WNT11 were genotyped. Chi-squared test was used to compare genotypes among the groups. Multifactor dimensionality reduction (MDR) and binary logistic regression analysis, both using gender and age as co-variables, were also used. We performed Bonferroni correction for multiple testing. RESULTS: Significant associations at P < .05 were observed for SNPs rs1005464 (P = .042) and rs235768 (P = .021) in BMP2 with mandibular retrognathism and for rs59983488 (RUNX2) with maxillary protrusion (P = .04) as well as for rs708111 (WNT3A) with skeletal class III (P = .02; dominant model), rs1533767 (WNT11) with a brachyfacial skeletal pattern (P = .01, OR = 0.10; dominant model) and for rs3934908 (SMAD6) with prognathism (P = .02; recessive model). After the Bonferroni correction, none of the SNPs remained associated. The MDR predicted some interaction for skeletal class II, dolichofacial and brachyfacial phenotypes. CONCLUSION: Our results suggest that SNPs in BMP2, BMP4, SMAD6, RUNX2, WNT3A and WNT11 could be involved in the aetiology of sagittal and vertical malocclusions.

Evaluation of photobiomodulation therapy to accelerate bone formation in the mid palatal suture after rapid palatal expansion: a randomized clinical trial.

To evaluate the efficiency of photobiomodulation therapy (PBMT) in the midpalatal suture (MPS) and pain sensation in patients undergoing rapid palatal expansion (RPE). Thirty-four individuals with the diagnosis of skeletal maxillary hypoplasia were divided in two groups: laser (n = 18) and control (n = 16). Treatment plan consisted of the use of the Hyrax expander in all patients. Subjects in the laser group were irradiated with diode laser (980 nm, 0.3 W) in six spots bilaterally distributed along the MPS for 10 s during the active phase of treatment and after overcorrection (passive phase of RPE). Control group received sham irradiations with the laser in standby mode to characterize the placebo effect. Digital occlusal radiographs were performed at different time-points for bone formation evaluation in both groups. The effects of laser irradiation on pain were assessed by the visual analog scale (Wong-Baker Faces Pain Scale). Bone formation between groups was not significantly different (p = 0.2273). At 3 months, bone formation was not yet complete in both groups. Pain sensation was similar between groups (p = 0.3940). However, pain was significantly higher for the first 7 days of treatment compared with the 14th day. PBMT did not accelerate bone regeneration in the MPS and pain sensation was similar.

Genetic variants in tooth agenesis-related genes might be also involved in tooth size variations.

OBJECTIVE: The present study aimed to evaluate if genetic variants in PAX9, MSX1, TGFα, FGF3, FGF10, FGF13, GLI2 and GLI3 are involved in TS of permanent teeth. MATERIALS AND METHODS: Pretreatment dental records from orthodontic patients were assessed prior to recruitment. Patients with tooth agenesis and congenital anomalies (including oral cleft) and/or syndromes were excluded. Dental casts were used to measure the maximum crown dimensions of all fully erupted permanent teeth except second and third molars in mesiodistal direction. Teeth with caries, occlusal wear, mesiodistal restorations, and obvious deformities were not evaluated. Genomic DNA samples were used for genotyping. The allelic discrimination of 13 genetic variants was performed. The associations between TS and genotype were analyzed by linear regression, adjusted by gender at a significance level of p ≤ 0.05. RESULTS: Genetic polymorphisms in the tooth agenesis-related genes studied here were associated with increased and decreased TS, in both maxilla and mandible (p < 0.05). CONCLUSION: This study reported associations of novel tooth agenesis-related gene variants with permanent tooth size variations. CLINICAL RELEVANCE: The presence of some genetic variants could allow the prediction of permanent tooth size.

Human permanent tooth sizes are associated with genes encoding oestrogen receptors.

OBJECTIVE: To evaluate if genetic polymorphisms in the oestrogen receptor 1 (ESR1) and oestrogen receptor 2 (ESR2) genes encoded for oestrogen receptors alpha (ERα) and beta (ERß) are involved in permanent tooth size. DESIGN: Cross-sectional study. SETTING: Orthodontic Clinic at School of Dentistry of Ribeirão Preto, University of São Paulo. PARTICIPANTS: A total of 108 orthodontic patients. MATERIALS AND METHODS: Pre-treatment orthodontic records were evaluated. Dental casts were used to determine the maximum crown measurements of fully erupted permanent teeth in the mesiodistal dimensions. Second and third molars were not included in the analysis. Genomic DNA samples were used for the genotyping of four genetic polymorphisms: ESR1 (rs9340799 and rs2234693) and ESR2 (rs1256049 and rs4986938). The associations between tooth size and sex were evaluated using t test. The associations between tooth size and genotype were analysed with linear regression and adjusted by sex at an alpha of P⩽0.05. RESULTS: Female patients presented smaller tooth size than male patients. A statistically significant difference was observed in almost all teeth (P<0.05). The genetic polymorphisms in rs9340799, rs2234693, rs1256049 and rs4986938 were associated with some tooth sizes in both the maxilla and mandible (P<0.05). CONCLUSION: This study provides evidence that genetic polymorphisms in ESR1 and ESR2 could be associated with tooth size in permanent teeth.

Effect of ovariectomy on maxilla and mandible dimensions of female rats.

OBJECTIVE: The role of oestrogen in craniofacial growth still remains unclear. Therefore, the present study aimed to assess the effect of oestrogen deficiency on maxilla and mandible dimensions. SETTING AND SAMPLE POPULATION: The study was conducted at the Department of Pediatric Dentistry at the School of Dentistry of Ribeirão Preto, University of São Paulo, and used forty female Wistar rats. MATERIAL AND METHODS: Ovariectomy (OVX) and placebo surgery (Sham) were performed when animals were twenty-one days old (prepubertal stage). Dimensions of the maxilla and mandible were assessed by craniometric analysis using radiographs, during and after puberty of the animals (45 and 63 days old, respectively). Quantitative real-time PCR and immunohistochemical analyses were performed to determine the expression and localization, respectively, of oestrogen receptor alpha (ERα) and oestrogen receptor beta (ERß) in different growth sites of the evaluated structures at puberty. The differences between the groups for each outcome were evaluated using the t test with an established alpha error of 5%. RESULTS: There were significant differences between the OVX and Sham groups for horizontal and vertical linear measurements in the maxilla and the mandible at both pubertal and post-pubertal stages (P < .05). The ovariectomized rats showed significantly greater measures for all dimensions assessed. No differences in gene expression of ERα and ERß were identified at the different growth sites between the OVX and Sham groups (P > .05). Immunohistochemical analyses revealed the presence of both oestrogen receptors in osteoblasts and chondrocytes in the midpalatal suture and mandibular condyle, respectively, in the OVX and Sham groups. CONCLUSION: Our results suggest that oestrogen deficiency from the prepubertal stage might increase the growth of the maxilla and mandible in female rats.

Possible association between craniofacial dimensions and genetic markers in ESR1 and ESR2.

OBJECTIVE: To investigate the association of genetic markers in ESR1 and ESR2 with craniofacial measurements. DESIGN: Cross-sectional study. SETTING: School of Dentistry of Ribeirão Preto, University of São Paulo. PARTICIPANTS: A total of 146 biologically unrelated, self-reported Caucasian Brazilians with no syndromic conditions were included. METHODS: Sagittal and vertical measurements (ANB, S-N, Ptm'-A', Co-Gn, Go-Pg, N-Me, ANS-Me, S-Go and Co-Go) from lateral cephalograms were examined for craniofacial evaluation. DNA was extracted from saliva and genetic markers in ESR1 (rs2234693 and rs9340799) and in ESR2 (rs1256049 and rs4986938) were analysed by real-time polymerase chain reaction. Hardy-Weinberg equilibrium was evaluated using the Chi-square test within each marker. The associations between craniofacial dimensions and genotypes were analysed by linear regression and adjusted by sex and age. The established alpha was 5%. RESULTS: Individuals carrying CC in ESR1 rs2234693 had a decrease of -3.146 mm in ANS-Me (P = 0.044). In addition, rs4986938 in ESR2 was associated with S-N measurement (P = 0.009/ ß = -3.465). This marker was also associated with Go-Pg measurement, in which the CC genotype had a decrease of -3.925 mm in the length of the mandibular body (P = 0.043). CONCLUSION: The present study suggests that in ESR1 and ESR2 are markers for variations in the craniofacial dimensions. However, further research should confirm the results.

Genotoxic effects in oral mucosal cells caused by the use of orthodontic fixed appliances in patients after short and long periods of treatment.

OBJECTIVE: This study aimed to evaluate the genotoxic effects in the oral epithelial cells of patients undergoing fixed orthodontic treatment and to compare these to a control group without treatment. The null hypothesis to be tested is that corrective orthodontic treatment at different periods does not cause genotoxic effects in patients. MATERIAL AND METHODS: An observational cross-sectional study including 74 patients enrolled in corrective orthodontic treatment and 21 control patients, between 11 and 35 years of age, of both genders, participated in the research. Patients undergoing treatment were divided into four treatment groups differentiated by treatment periods: G1, n = 21 (1 month to 12 months); G2, n = 21 (13 to 24 months); G3, n = 23 (25 to 48 months); and G4, n = 9 (over 48 months). Cells were collected by scraping the internal side of the cheek and subsequently placed in tubes containing 0.9% sodium chloride solution. The sample underwent evaluation for genotoxic effects by means of the micronucleus test (MNT). Bivariate analyses were performed using parametric tests (t test or ANOVA) and nonparametric tests (Chi-square test, Kruskal-Wallis test, Dunn post-test). The adopted level of significance was 5%. RESULTS: Statistically significant differences for any of the genotoxic abnormalities (binucleated, trinucleated, karyolysis, piknosis, nuclear buds) were not found except for karyolysis, which was higher in the control group than in G4 (p < 0.05). CONCLUSIONS: This study did not demonstrate evidence of genotoxic effects even after long periods of corrective orthodontic treatment. CLINICAL RELEVANCE: This study explores genotoxic effects in fixed orthodontic patients.

Polymorphisms in FGF3, FGF10, and FGF13 May Contribute to the Presence of Temporomandibular Disorders in Patients Who Required Orthognathic Surgery.

BACKGROUND: To evaluate whether genetic polymorphisms in FGF3, FGF10, and FGF13 are associated with temporomandibular disorders (TMD) in patients that presented dentofacial deformities requiring orthognathic surgery. MATERIAL AND METHODS: The sample comprised a total of 113 patients of both sexes. The diagnosis of TMD was performed before orthognathic surgery between Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD). According to the TMD assessment, the patients were divided into 3 major groups: myofascial pain, articular disc displacements and other TMD conditions (arthralgia, arthritis, and arthrosis). Genomic DNA was collected from saliva samples and genetic polymorphisms in FGF3 (rs1893047 and rs7932320), FGF10 (rs900379) and FGF13 (rs5931572 and rs5974804) were analyzed by real-time polymerase chain reactions. The association between the TMD conditions and the genetic polymorphisms assessed were analyzed by Poisson Regression. The model was calculated on bivariate and adjusted by sex. The established alpha was 5%. Data were analyzed by using SPSS software (IBM, Armonk, NY). RESULTS: The genetic polymorphisms rs7932320 in FGF3 (P < 0.001) and rs900379 in FGF10 (P < 0.05) were associated with the presence of muscle disorder. The genetic polymorphisms rs1893047 in FGF3, rs900379 in FGF10, and rs5974804 and rs5931572 in FGF13, were associated with the presence of disk displacement (P < 0.05). The genetic polymorphisms rs1893047 and rs7932320 in FGF3, rs900379 in FGF10, and rs900379 in FGF10 were associated with other TMD conditions (P < 0.05). CONCLUSION: Genetic polymorphisms in FGF3, FGF10, and FGF13 genes were associated with temporomandibular disorders in a population with dentofacial deformities.

Genetic polymorphism in RANK is associated with mandibular size.

OBJECTIVE: The aim of this study was to evaluate the association between genetic polymorphisms in RANK, RANKL and OPG with maxillary and mandibular dimensions in humans. DESIGN: DNA extracted from saliva and the rs3826620, rs9594738 and rs2073618 polymorphisms in RANK, RANKL and OPG, respectively, were analysed by real-time PCR. Four linear measurements (Co-Gn, GoPg, Co-Go and PTM-A) from lateral cephalograms were examined for the evaluation of craniofacial measurements. ANOVA testing and a multivariate linear regression analysis, adjusted for age and gender, were used for statistical analysis, with an alpha of 5%. Hardy-Weinberg equilibrium was also evaluated using the chi-square test within each polymorphism. SETTING: School of Dentistry of Ribeirão Preto, University of São Paulo. PARTICIPANTS: A total of 100 unrelated non-syndromic Brazilian Caucasian subjects were included in this study. RESULTS: The polymorphism in RANK was associated with a higher Go-Pg measurement (p = .039). In the multivariate analysis, adjusted for age and gender, the polymorphism in RANK was associated with Go-Pg (p = .017) and Co-Gn (p = .043). CONCLUSION: The polymorphism rs3826620 in RANK is associated with the mandibular size.

Microbial complexes levels in conventional and self-ligating brackets.

OBJECTIVES: The aims were to evaluate the levels of bacterial species in saliva and in situ and to assess whether the design of brackets influences the risk of developing periodontal disease. MATERIALS AND METHODS: Twenty patients (13.3 mean age) were bonded with self-ligating brackets and a conventional bracket. Saliva was collected before bonding and 30 and 60 days after bonding. One sample of each bracket was removed 30 and 60 days after bonding. The analysis was determined by checkerboard DNA-DNA hybridization. The data was evaluated by the non-parametric test. RESULTS: A significant increase in the levels of bacterial species in the saliva occurred in 15 of the 22 analyzed species. The self-ligating brackets presented the highest incidence percentages for the orange and red complexes 60 days after bonding. In situ analyses showed different patterns according to the bracket design. The levels of Campylobacter rectus showed significant differences (p = 0.011) 60 days after bonding among the three brackets; the highest values were observed in the In-Ovation®R bracket. CONCLUSIONS: The bracket design seems to influence the levels of bacterial species involved in periodontal disease. Considering the wide variety of bacterial species, additional studies are needed to aid in the establishment of effective protocols to prevent the development of periodontal disease during orthodontic treatment. CLINICAL RELEVANCE: A dynamic alteration in the oral microbiota may lead to inflammatory reactions in the supporting soft and hard tissues. The different types of brackets interfere with bacterial adherence. Bracket design should be considered in orthodontic treatment.

Bisphenol A release from orthodontic adhesives measured in vitro and in vivo with gas chromatography.

INTRODUCTION: The objectives of this study were to quantify in vitro the Bisphenol A (BPA) release from 5 orthodontic composites and to assess in vivo the BPA level in patients' saliva and urine after bracket bonding with an orthodontic adhesive system. METHODS: For the in-vitro portion of this study, 5 orthodontic composites were evaluated: Eagle Spectrum (American Orthodontics, Sheboygan, Wis), Enlight (Ormco, Orange, Calif), Light Bond (Reliance Orthodontic Products, Itasca, Ill), Mono Lok II (Rocky Mountain Orthodontics, Denver, Colo), and Transbond XT (3M Unitek, Monrovia, Calif). Simulating intraoral conditions, the specimens were immersed in a water/ethanol solution, and the BPA (ng.g-1) liberation was measured after 30 minutes, 24 hours, 1 day, 1 week, and 1 month by the gas chromatography system coupled with mass spectrometry. Twenty patients indicated for fixed orthodontic treatment participated in the in-vivo study. Saliva samples were collected before bracket bonding and then 30 minutes, 24 hours, 1 day, 1 week, and 1 month after bonding the brackets. Urine samples were collected before bonding and then at 1 day, 1 week, and 1 month after bonding. The results were analyzed statistically using analysis of variance and Tukey posttest, with a significance level of 5%. RESULTS: All composites evaluated in vitro released small amounts of BPA. Enlight composite showed the greatest release, at 1 month. Regarding the in-vivo study, the mean BPA level in saliva increased significantly only at 30 minutes after bonding in comparison with measurements recorded before bonding. CONCLUSIONS: All orthodontic composites released BPA in vitro. Enlight and Light Bond had, respectively, the highest and lowest BPA releases in vitro. The in-vivo experiment showed that bracket bonding with the Transbond XT orthodontic adhesive system resulted in increased BPA levels in saliva and urine. The levels were significant but still lower than the reference dose for daily ingestion.

CO2 laser as auxiliary in the debonding of ceramic brackets.

This study evaluated the temperature in the bonding composite and in the pulp chamber, the shear bond strength after the irradiation of CO2 lasers, and the Adhesive Remnant Index (ARI) after debonding of ceramic bracket. A hundred and five premolars were used: 30 to evaluate the temperature and 75 to test the resistance to shear and the ARI. To assess the temperature, different irradiation times (3 and 5 s), pulse duration (0.001 and 0.003 s), and output power (5, 8, and 10 W) were tested (total of 12 groups). During all the irradiation, specimens were immersed in thermal bath water at 37 °C. In the test and ARI evaluation, premolars were divided into five groups (n = 15) and were submitted to the following regimens of CO2 laser irradiation: I (5 W, pulse duration = 0.01 s, application time = 3 s), II (5 W, 0.03 s, 3 s), III (8 W, 0.01 s, 3 s), and IV (1 0 W, 0.01 s, 3 s). Group C (control) was not subjected to irradiation. ARI was measured after debonding of the bracket. Following irradiation of the lasers, the pulpal temperature was not higher than 5.5 °C in four of the study groups. Results were submitted to the ANOVA and Duncan's test. CO2 laser irradiation regimen IV was one in which the strength of debonding is 7.33 MPa. Therefore, CO2 laser may aid removal of ceramic brackets; it decreased the bond strength without increasing the excessive temperature excessively.

Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes.

This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples.

Single Nucleotide Polymorphisms in RUNX2 and BMP2 contributes to different vertical facial profile.

The vertical facial profile is a crucial factor for facial harmony with significant implications for both aesthetic satisfaction and orthodontic treatment planning. However, the role of single nucleotide polymorphisms (SNPs) in the development of vertical facial proportions is still poorly understood. This study aimed to investigate the potential impact of some SNPs in genes associated with craniofacial bone development on the establishment of different vertical facial profiles. Vertical facial profiles were assessed by two senior orthodontists through pre-treatment digital lateral cephalograms. The vertical facial profile type was determined by recommended measurement according to the American Board of Orthodontics. Healthy orthodontic patients were divided into the following groups: "Normodivergent" (control group), "Hyperdivergent" and "Hypodivergent". Patients with a history of orthodontic or facial surgical intervention were excluded. Genomic DNA extracted from saliva samples was used for the genotyping of 7 SNPs in RUNX2, BMP2, BMP4 and SMAD6 genes using real-time polymerase chain reactions (PCR). The genotype distribution between groups was evaluated by uni- and multivariate analysis adjusted by age (alpha = 5%). A total of 272 patients were included, 158 (58.1%) were "Normodivergent", 68 (25.0%) were "Hyperdivergent", and 46 (16.9%) were "Hypodivergent". The SNPs rs1200425 (RUNX2) and rs1005464 (BMP2) were associated with a hyperdivergent vertical profile in uni- and multivariate analysis (p-value < 0.05). Synergistic effect was observed when evaluating both SNPs rs1200425- rs1005464 simultaneously (Prevalence Ratio = 4.0; 95% Confidence Interval = 1.2-13.4; p-value = 0.022). In conclusion, this study supports a link between genetic factors and the establishment of vertical facial profiles. SNPs in RUNX2 and BMP2 genes were identified as potential contributors to hyperdivergent facial profiles.