Silicon Analogues of Cyclopropyl Radical Derived from a Highly Stable Cyclic Disilene Compound Featuring a Si-Br Bond.

A halogen-substituted cyclic disilene compound, bromocyclotrisilene, Si3Br(Eind)3 (3a), bearing fused-ring bulky Eind (a: R1 = R2 = Et) groups, has been synthesized as an extraordinarily air-stable compound by the reduction of 1,2-dibromodisilene, (Eind)BrSi═SiBr(Eind) (2a), or tribromosilane, (Eind)SiBr3 (1a), with the Mg or Li metal. The X-ray diffraction analysis of 3a showed that the disilene moiety has an almost planar, but slightly trans-bent structure. Even though 3a is quite air-stable both in solutions and in the solid state, its Si-Br bond is reactive under reducing conditions. The further treatment of 3a with the Li metal leads to the formation of room-temperature thermally stable silicon homologues of the cyclopropyl radical, i.e., the cyclotrisilanyl radicals (6a) [6a(syn) and 6a(anti)], via intramolecular C-H bond activation in a transient silicon homologue of the cyclopropenyl radical, i.e., the cyclotrisilenyl radical, [Si3(Eind)3]• (5a). The formation mechanism of 6a from 5a is discussed based on the theoretical calculations. The unique structural and electronic properties of these Si3 three-membered ring species incorporating the Eind groups have been experimentally and theoretically investigated.

Neutral Chromium Complex with a Cr≡Si Triple Bond: Synthesis and Photoinduced H-H and Benzene C-H Bond Activation.

A neutral silylyne complex with a Cr≡Si triple bond was prepared by dehydrogenation of a chromium silylene complex with Cr-H and Si-H bonds, and was isolated as monomeric crystals, unlike dimeric forms of its tungsten and molybdenum congeners. The strong Cr(δ-)-Si(δ+) bond polarity was revealed by the reaction with MeOH and DFT calculations. The chromium silylyne complex reacted with H2 under LED (365 nm) irradiation to reproduce the precursor silylene complex with a (H)Cr=Si(H) moiety, as a result of 1,2-H-H addition across the Cr≡Si triple bond. Similarly, the chromium silylyne complex reacted with benzene under irradiation to afford an 1,2-addition product with a (H)Cr=Si(Ph) moiety, via benzene C-H bond activation accompanied by Si-C bond forming.

Approach to the "Missing" Diarylsilylene: Formation, Characterization, and Intramolecular C-H Bond Activation of Blue Diarylsilylenes with Bulky Rind Groups.

The treatment of the bulky Rind-based dibromosilanes, (Rind)2SiBr2 (2) [Rind = 1,1,7,7-tetra-R1-3,3,5,5-tetra-R2-s-hydrindacen-4-yl: EMind (a: R1 = Et, R2 = Me) and Eind (b: R1 = R2 = Et)], with two equivalents of tBuLi in Et2O at low temperatures resulted in the formation of blue solutions derived from the diarylsilylenes, (Rind)2Si: (3). Upon warming the solutions above -20 °C, the blue color gradually faded, accompanying the decomposition of 3 and yielding cyclic hydrosilanes (4) via intramolecular C-H bond insertion at the Si(II) center. The molecular structures of the bulky Eind-based 3b and 4b were confirmed by X-ray crystallography. Thus, at -20 °C, blue crystals were formed (Crystal-A), which were identified as mixed crystals of 3b and 4b. Additionally, colorless crystals of 4b as a singular component were isolated (Crystal-B), whose structure was also determined by an X-ray diffraction analysis. Although the isolation of 3 was difficult due to their thermally labile nature, their structural characteristics and electronic properties were discussed based on the experimental findings complemented by computational results. We also examined the hydrolysis of 3b to afford the silanol, (Eind)2SiH(OH) (5b).

Neutral Silylyne Complex of Molybdenum: Synthesis, Properties, and Access to Silaiminoacyl Complexes via [2+3] Cycloaddition.

A neutral silylyne complex of molybdenum was synthesized by the stepwise dehydrogenation method and its properties were compared with those of the tungsten analog. The complex takes a dimeric form as crystals but afford a monomer-dimer equilibrium in solution. The replacement of the central metal from W to Mo led to a monomer dominant (~98 %) solution at room temperature. The monomer-dimer dynamics was investigated based on thermodynamic parameters. The molybdenum silylyne complex underwent [2+2] cycloaddition with alkynes much faster than the tungsten analog. The reactions with organic azides led to the formation of the first example of silaiminoacyl complexes through [2+3] cycloaddition. The structures and bonding aspects of the products were clarified by multiple measurements and DFT calculations.

Lewis Base Adducts of Phosphine-Stabilized Pb(II) Cations: Synthesis and Catalytic Hydroamination of Alkynes.

Phosphine-stabilized Pb(II) cations, generated by chloride abstraction from chloroplumbylene 1, readily react with Lewis bases (L) such as phosphines and amines to give the corresponding donor-acceptor complexes 3. These complexes 3 react with phenylacetlylene via alkyne insertion into the Pb-L bond to afford the corresponding vinylplumbylenes 4. Of particular interest, the stable complex 4-HNiPr2 (with a secondary amine) can be used as a hydroamination catalyst of phenylacetylene.

Reactions of a Silylyne Complex with Aldehydes: Formation of W-Si-O-C Four-Membered Metallacycles and Their Metathesis-Like Fragmentation.

A tungsten silylyne complex having a W≡Si triple bond reacted with two molecules of aldehydes at room temperature to give W-Si-O-C four-membered metallacycles by [2+2] cycloaddition and subsequent formyl hydrogen transfer from one aldehyde molecule to another. Upon heating to 70 °C, the four-membered metallacycles underwent metathesis-like fragmentation cleanly to afford carbyne complexes and "silanoic esters," in a manner similar to that of metallacyclobutadiene, an intermediate of alkyne metathesis reactions, and dimerization of the latter products gave 1,3-cyclodisiloxanes. The "silanoic ester" was also trapped by pivalaldehyde to give a [2+2] cycloaddition product in high yield.

Three-dimensional displacement measurement of self-oscillating gel using digital holographic microscopy.

To measure the 3D microdisplacement of a self-oscillating polymer gel driven by the Belousov-Zhabotinsky reaction, we propose, to the best of our knowledge, a new particle detection and tracking method based on a phase image/volume template matching using digital holographic microscopy. We demonstrate the precision of the proposed method and compare it with conventional approaches. The method is applied to 3D measurement of the motions of particles attached to the surface of an oscillating gel. Measurement results show that the local area of the gel oscillates periodically, and the motion propagates throughout the gel. Our method can measure rapid and complex 3D microdisplacement change.

π-Electron systems containing Si=Si double bonds.

Sterically large substituents can provide kinetic stabilization to various types of low-coordinate compounds. For example, regarding the chemistry of the group 14 elements, since West et al. introduced the concept of kinetic protection of the otherwise highly reactive Si=Si double bond by bulky mesityl (2,4,6-trimethylphenyl) groups in 1981, a number of unsaturated compounds of silicon and its group homologs have been successfully isolated by steric effects using the appropriate large substituents. However, the functions and applications of the Si-Si π-bonds consisting of the 3pπ electrons on the formally sp2-hybridized silicon atoms have rarely been explored until 10 years ago, when Scheschkewitz and Tamao independently reported the model systems of the oligo(p-phenylenedisilenylene)s (Si-OPVs) in 2007. This review focuses on the recent advances in the chemistry of π-electron systems containing Si=Si double bonds, mainly published in the last decade. The synthesis, characterization, and potential application of a variety of donor-free π-conjugated disilene compounds are described.

Cleavage of a P=P Double Bond Mediated by N-Heterocyclic Carbenes.

The reaction of the bulky diphosphenes (Rind)P=P(Rind) (1; Rind=1,1,3,3,5,5,7,7-octa-R-substituted s-hydrindacen-4-yl) with two molecules of N-heterocyclic carbene (NHC; 1,3,4,5-tetramethylimidazol-2-ylidene) resulted in the quantitative formation of the NHC-bound phosphinidenes NHC→P(Rind) (2), along with the cleavage of the P=P double bond. The reaction times are dependent on the steric size of the Rind groups (11 days for 2 a (R=Et) and 2 h for 2 b (R=Et, Me) at room temperature). The mechanism for the double bond-breaking is proposed to proceed via the formation of the NHC-coordinated, highly polarized diphospehenes 3 as an intermediate. Approach of a second NHC to 3 induces P-P bond cleavage and P-C bond formation, which proceeds through a transition state with a large negative Gibbs energy change to afford the two molecules of 2, thus being the rate-determining step of the overall reaction with the activation barriers of 80.4 for 2 a and 29.1 kJ mol-1 for 2 b.

(Z)-1,2-Di(1-pyrenyl)disilene: Synthesis, Structure, and Intramolecular Charge-Transfer Emission.

(Z)-1,2-Di(1-pyrenyl)disilene containing bulky 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacen-4-yl (Eind) groups has been obtained as purple crystals by the reductive coupling reaction of the corresponding dibromosilane with lithium naphthalenide. An X-ray crystallographic analysis revealed an Eind- and pyrenyl-meshed molecular gear around the disilene core adopting the Z configuration, in which the two pyrenyl groups intramolecularly interact through the π-π stacking with a distance of 3.635 Å between the centers of the two pyrene rings. The disilene π-system exhibits a π(Si-Si) → π*(pyrene) intramolecular charge-transfer (ICT) fluorescence at room temperature, whose wavelengths depend on the solvent polarity. The photophysical properties are theoretically supported by computational studies including excited-state calculations.

Synthesis and Structural Characterization of Lithium and Titanium Complexes Bearing a Bulky Aryloxide Ligand Based on a Rigid Fused-Ring s-Hydrindacene Skeleton.

The bulky aryl alcohols, (Rind)OH (1) [Rind = EMind (a) and Eind (b)], based on the rigid fused-ring 1,1,3,3,5,5,7,7-octa-R-substituted s-hydrindacene skeleton were prepared by the reaction of (Rind)Li with nitrobenzene followed by protonation. The treatment of 1 with (n)BuLi affords the lithium aryloxide dimers [(Rind)OLi(THF)]2 (2) or trimers [(Rind)OLi]3 (3), depending on the employed solvents (THF = tetrahydrofuran). The salt metathesis reaction of [(EMind)OLi(THF)]2 (2a) with TiCl4(THF)2 leads to the formation of the mononuclear diamagnetic mono- and bis(aryloxide) Ti(IV) complexes, [(EMind)O]TiCl3(THF) (4a) and [(EMind)O]2TiCl2 (5a). We also isolated a trace amount of the tris(aryloxide) Ti(IV) complex, [(EMind)O]3TiCl (6a). The reaction between 2a and TiCl3(THF)3 resulted in the isolation of the mononuclear paramagnetic mono- and bis(aryloxide) Ti(III) complexes, [(EMind)O]TiCl2(THF)2 (7a) and [(EMind)O]2TiCl(THF)2 (8a). The discrete monomeric structures of the titanium complexes 4a, 5a, 6a, 7a, and 8a were determined by X-ray crystallography.

Activation of Dihydrogen by Masked Doubly Bonded Aluminum Species.

Activation of dihydrogen by masked dialumenes (Al=Al doubly bonded species) is reported. Reactions of barrelene-type dialumanes, which have the reactivity as masked equivalents of 1,2-diaryldialumenes ArAl=AlAr, with H2 afforded dihydroalumanes ArAlH2 at room temperature (Ar: bulky aryl groups). These dihydroalumanes form hydrogen-bridged dimers [ArHAl(µ-H)]2 in the crystalline state, while a monomer-dimer equilibrium was suggested in solution. The 1,2-diaryldialumenes generated from the barrelene-type dialumanes are the putative active species in the cleavage of H2 .

A Square-Planar Complex of Platinum(0).

The Pt0 complex [Pt(PPh3 )(Eind2 -BPEP)] with a pyridine-based PNP-pincer-type phosphaalkene ligand (Eind2 -BPEP) has a highly planar geometry around Pt with ∑(Pt)=358.6°. This coordination geometry is very uncommon for formal d10 complexes, and the Pd and Ni homologues with the same ligands adopt distorted tetrahedral geometries. DFT calculations reveal that both the Pt and Pd complexes are M0 species with nearly ten valence electrons on the metals whereas their atomic orbital occupancies are evidently different from one another. The Pt complex has a higher occupancy of the atomic 6s orbital because of strong s-d hybridization due to relativistic effects, thereby adopting a highly planar geometry reflecting the shape and orientation of the partially unoccupied dx2-y2 orbital.

Coplanar Oligo(p-phenylenedisilenylene)s as Si═Si Analogues of Oligo(p-phenylenevinylene)s: Evidence for Extended π-Conjugation through the Carbon and Silicon π-Frameworks.

A series of oligo(p-phenylenedisilenylene)s (Si-OPVs 1-4), silicon analogues of oligo(p-phenylenevinylene)s, up to the tetramer have been synthesized and isolated by the introduction of a newly developed protecting group [(HexO)MEind] for improving their solubility. The experimental and theoretical studies of the Si-OPVs 1-4 demonstrate the fully extended π-conjugation of the Si-OPV main chains. Single crystal X-ray analyses of the monomer 1 and the dimer 2 revealed the highly coplanar Si-OPV backbones facilitating the effective extension of the π-conjugation, which has further been validated by the significant increases in the absorption maxima from 465 nm for the monomer 1 to 610 nm for the tetramer 4. The absorption maxima exhibit an excellent fit to Meier's equation, leading to the estimation of an effective conjugation length (ECL) of 9 repeat units (nECL = 9) and the absorption maximum of 635 nm for the infinite chain (λ∞ = 635 nm). In sharp contrast to other nonemissive disilenes, the Si-OPVs 2-4 show an intense fluorescence from 613 to 668 nm at room temperature with the quantum yields up to 0.48. All the data presented here provide the first evidence for the efficient extended π-conjugation between the Si═Si double bonds and the carbon π-electron systems over the entire Si-OPV skeleton. This study reveals the possibility for developing the conjugated disilene π-systems, in which the Si═Si double bonds would be promising building blocks, significantly optimizing the intrinsic photophysical and electrochemical properties of the carbon-based π-conjugated materials.

Reactions of diaryldibromodisilenes with N-heterocyclic carbenes: formation of formal bis-NHC adducts of silyliumylidene cations.

Reactions of stable 1,2-dibromodisilenes ((E)-Ar(Br)Si=Si(Br)Ar) with N-heterocyclic carbenes (NHC) afforded NHC-arylbromosilylene adducts or bromide salts of the corresponding bis-NHC adducts of the formal arylsilyliumylidene cations ([ArSi:](+)). In some cases, an NHC was able to replace a bromide anion in the coordination sphere of the arylbromosilylene-NHC adduct.

A convenient route to synthetic analogues of the oxidized form of high-potential iron-sulfur proteins.

An amide-bound [Fe4S4](3+) cluster, [Fe4S4{N(SiMe3)2}4](-) (1), was found to serve as a convenient precursor for synthetic analogues of the oxidized form of high-potential iron-sulfur proteins. Treatment of 1 with 4 equiv of bulky thiols led to replacement of the amide ligands with thiolates, giving rise to a series of [Fe4S4(SR)4](-) clusters (R = Dmp (2a), Tbt (2b), Eind (2c), Dxp (2d), Dpp (2e); Dmp = 2,6-di(mesityl)phenyl, Tbt = 2,4,6-tris[bis(trimethylsilyl)methyl]phenyl, Eind = 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacen-4-yl, Dxp = 2,6-di(m-xylyl)phenyl, Dpp = 2,6-diphenylphenyl). These clusters were characterized by the mass spectrum, the EPR spectrum, and X-ray crystallography. The redox potentials of the [Fe4S4](3+/2+) couple, -0.82 V (2a), -0.86 V (2b), -0.84 V (2c), -0.74 V (2d), and -0.63 V (2e) vs Ag/Ag(+) in THF, are significantly more negative than that of [Fe4S4(SPh)4](-/2-) (-0.21 V).

Novel approach to HER2 quantification using phosphor-integrated dots in human breast invasive cancer microarray.

HER2 expression in breast cancer is evaluated to select patients for anti-HER2 therapy. With the advent of newly approved HER2-targeted drugs for low HER2 expression breast cancer, more solid evidence on the whole spectrum of HER2 expression is needed. In this study, we quantitatively assessed HER2 expression from the whole core by combining high-intensity phosphor-integrated dot (PID) immunostaining and whole slide imaging (WSI) analysis. Two types of staining were performed using a 170-core tissue microarray of invasive breast cancer. First, HER2 was stained by immunohistochemistry (IHC), and IHC scores were determined by two practicing pathologists according to the ASCO/CAP HER2 guideline. Second, HER2 was stained with PID, and tentative PID scores were determined by quantitative analysis. The results show that PID can numerically classify HER2 expression status into scores 3+, 2+, 1+, and 0. The HER2 value quantified by PID strongly correlated with the 3, 3'-diaminobenzidine (DAB) IHC score determined by pathologists (R2 = 0.93). PID IHC score 1+ cases included both DAB IHC score 1+ and 0 cases, and low HER2 expression cases appeared to be often evaluated as DAB IHC score 0. Therefore, digital image analysis by PID and WSI can help stratify HER2 IHC. It may also help classify low HER2 expression.

Selective monooxygenation of diphosphenes with molecular oxygen.

The O2 splitting mediated by the bulky Rind-based diphosphenes resulted in the clean formation of the mixed-valent diphosphorus compounds, diphosphene oxides, with P2O moieties. Their structural features and electronic properties have been clearly characterized by experimental and theoretical methods.

A new binding motif of sterically demanding thiolates on a gold cluster.

A gold cluster, Au(41)(S-Eind)(12), was synthesized by ligating the bulky arenethiol 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacene-4-thiol (Eind-SH) to preformed Au clusters. Extended X-ray absorption fine structure, X-ray photoelectron spectroscopy, and the fragmentation pattern in the mass spectrometry analysis indicated that formation of gold-thiolate oligomers at the interface was suppressed, in sharp contrast to conventional thiolate-protected Au clusters.

Titanium complexes supported by an [OSSO]-type bis(phenolato) ligand based on a trans-cyclooctanediyl platform: synthesis, structures, and 1-hexene polymerization.

trans-Cyclooctanediyl-bridged [OSSO]-type ligand 4 reacts with TiCl(4)(thf)(2) in toluene to produce the corresponding titanium(IV) dichloro complexes as an inseparable mixture of cis-α isomer 6a and cis-ß isomer 6b in a ratio of 2:1, whereas treatment of dilithio salt of 4 with TiCl(3)(thf)(3) in Et(2)O afforded chloride-bridged dimeric titanium(III) complex 8, which indicated the antiferromagnetic character in a nonpolar solvent solution. Di(isopropoxy) titanium(IV) complex 10 having a C(2)-symmetric cis-α configuration was synthesized by the reaction of 4 with Ti(O(i)Pr)(4) in toluene as yellow crystals. Moreover, the reaction of 4 with Ti(NEt(2))(4) in toluene resulted in the unexpected formation of [OSSO]-type bis(phenolato)-bridged dinuclear diamido titanium(IV) complex 11, which adopted a distorted tetrahedral geometry on the titanium center. These titanium complexes were characterized on the basis of their NMR spectroscopic data, and the molecular structures of complexes 8, 10, and 11 were established by single crystal X-ray diffraction. The titanium(IV) and (III) complexes 6 and 8 upon activation with a cocatalyst in toluene polymerized 1-hexene isospecifically to produce poly(1-hexene) having high molecular weight (M(w) = 22,000-52,000 g mol(-1)) and relatively narrow polydispersity (M(w)/M(n) = 1.7-1.8), albeit with low activity [0.27-1.0 g mmol(cat)(-1) h(-1)].