4-Chloroisocoumarins as Chlamydial Protease Inhibitors and Anti-Chlamydial Agents.

4-Chloroisocoumarin compounds have broad inhibitory properties against serine proteases. Here, we show that selected 3-alkoxy-4-chloroisocoumarins preferentially inhibit the activity of the conserved serine protease High-temperature requirement A of Chlamydia trachomatis. The synthesis of a new series of isocoumarin-based scaffolds has been developed, and their anti-chlamydial properties were investigated. The structure of the alkoxy substituent was found to influence the potency of the compounds against High-temperature requirement A, and modifications to the C-7 position of the 3-alkoxy-4-chloroisocoumarin structure attenuate anti-chlamydial properties.

The fate of organic species upon sintering of thiol-stabilised gold nanoparticles under different atmospheric conditions.

Understanding and controlling the sintering behavior of gold nanoparticles is important for applications such as printed electronics, catalysis and sensing that utilise these materials. Here we examine the processes by which thiol-protected gold nanoparticles thermally sinter under a variety of atmospheres. We find that upon sintering, the surface-bound thiyl ligands exclusively form the corresponding disulfide species when released from the gold surface. Experiments conducted using air, hydrogen, nitrogen, or argon atmospheres revealed no significant differences between the temperatures of the sintering event nor on the composition of released organic species. When conducted under high vacuum, the sintering event occurred at lower temperatures compared to ambient pressures in cases where the resulting disulfide had relatively high volatility (dibutyl disulfide). Hexadecylthiol-stabilized particles exhibited no significant differences in the temperatures of the sintering event under ambient pressures compared to high vacuum conditions. We attribute this to the relatively low volatility of the resultant dihexadecyl disulfide product.

Genome-Wide Analysis of Circulating Cell-Free DNA Copy Number Detects Active Melanoma and Predicts Survival.

BACKGROUND: A substantial number of melanoma patients develop local or metastatic recurrence, and early detection of these is vital to maximise benefit from new therapies such as inhibitors of BRAF and MEK, or immune checkpoints. This study explored the use of novel DNA copy-number profiles in circulating cell-free DNA (cfDNA) as a potential biomarker of active disease and survival. PATIENTS AND METHODS: Melanoma patients were recruited from oncology and dermatology clinics in Sheffield, UK, and cfDNA was isolated from stored blood plasma. Using low-coverage whole-genome sequencing, we created copy-number profiles from cfDNA from 83 melanoma patients, 44 of whom had active disease. We used scoring algorithms to summarize copy-number aberrations and investigated their utility in multivariable logistic and Cox regression analyses. RESULTS: The copy-number aberration score (CNAS) was a good discriminator of active disease (odds ratio, 3.1; 95% CI, 1.5-6.2; P = 0.002), and CNAS above or below the 75th percentile remained a significant discriminator in multivariable analysis for active disease (P = 0.019, with area under ROC curve of 0.90). Additionally, mortality was higher in those with CNASs above the 75th percentile than in those with lower scores (HR, 3.4; 95% CI, 1.5-7.9; P = 0.005), adjusting for stage of disease, disease status (active or resected), BRAF status, and cfDNA concentration. CONCLUSIONS: This study demonstrates the potential of a de novo approach utilizing copy-number profiling of cfDNA as a biomarker of active disease and survival in melanoma. Longitudinal analysis of copy-number profiles as an early marker of relapsed disease is warranted.

From Lead(II) Dithiocarbamate Precursors to a Fast Response PbS Positive Temperature Coefficient Thermistor.

PbS submicron crystals were formed by thermolysis of two different lead dithiocarbamate complexes. These precursors were readily synthesized and fully characterized, and in situ synchrotron powder diffraction experiments were performed to characterize their decomposition. The structure and purity of resultant PbS was examined using scanning electron and transmission electron microscopies, powder X-ray diffraction, and infrared spectroscopy. Submicron crystalline PbS was used to create a new PbS thermistor with excellent sensitivity and an ultrarapid thermal response time.

Remarkable thermal stability of gold nanoparticles functionalised with ruthenium phthalocyanine complexes.

A gold nanoparticle (AuNP) ruthenium phthalocyanine (RuPc) nanocomposite has been synthesised that exhibits high thermal stability. Electrical resistance measurements revealed that the nanocomposite is stable up to ∼320 °C. Examination of the nanocomposite and the RuPc stabiliser complex using thermogravimetric analysis and differential scanning calorimetry show that the remarkable thermal stability is due to the RuPc molecules, which provide an effective barrier to sintering of the AuNPs.

Adsorption and Photocatalytic Degradation of Methylene Blue Using Potassium Polytitanate and Solar Simulator.

Solar photocatalytic degradation of organic water pollutants can be used to degrade toxic organic pollutants in water. In this study, potassium titanate nanofibres were synthesized by an aqueous peroxide route at high pH and examined as photocatalysts for photodegradation of methylene blue (MB) using a solar simulator. Initially, MB was adsorbed on the surface of potassium polytitanates to achieve adsorption equilibrium before the photocatalysts were illuminated using solar simulator. The results showed that potassium polytitanate nanofibres were effective adsorbents of MB and also facilitated its photocatalytic degradation. Sulphate ion evolution during photocatalysis confirmed that some mineralisation occurred and hence photo-oxidative degradation of MB took place. The optimum operational conditions for the photocatalytic degradation of MB were found at 0.05 g/L of photocatalyst load, 10 mg/L MB and pH 7. The stability and regeneration of the photocatalyst specimen was also studied for 3 degradation cycles using adsorption/photocatalysis model. Morphological structure analysis of potassium titanate showed nanocrystallines structure of longitudinally-oriented isolated fibre with a length up to several micrometres with diameters ranging from 10 to 20 nanometres.

Charging of gold/metal oxide/gold nanocapacitors in a scanning electron microscope.

Triangular parallel-plate nanocapacitors were fabricated by a combination of microsphere lithography and physical vapor deposition. The devices were comprised of a 20 nm layer of dielectric material sandwiched between two 20 nm layers of gold. Dielectric materials with a range of relative permittivities were investigated. Charging of the capacitors was probed in a scanning electron microscope (SEM) by monitoring the change in brightness of the images of the devices as a function of time. The time constants, RC, associated with the charging of the capacitors, were extracted from the SEM grayscale data. The resulting average RC values were 248 ± 27 s for SiO2, 70 ± 8 s for Al2O3, 113 ± 80 s for ZnO and 125 ± 13 s for HfO2. These values are consistent with the anticipated RC values based on the resistivities and permittivities of the materials used in the devices and importantly, were measured without the need to attach any wires or leads.

Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet.

Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 (P25) in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrothermal treatment showed high affinity in adsorbing crystal violet (CV), which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalytic degradation, and they can be easily separated from the solution by settling.

Recent Advances in High-Rate Solar-Driven Interfacial Evaporation.

Recent advances in solar-driven interfacial evaporation (SDIE) have led to high evaporation rates that open promising avenues for practical utilization in freshwater production and industrial application for pollutant and nutrient concentration, and resource recovery. Breakthroughs in overcoming the theoretical limitation of 2D interfacial evaporation have allowed for developing systems with high evaporation rates. This study presents a comprehensive review of various evaporator designs that have achieved pure evaporation rates beyond 4 kg m-2 h-1, including structural and material designs allowing for rapid evaporation, passive 3D designs, and systems coupled with alternative energy sources of wind and joule heating. The operational mechanisms for each design are outlined together with discussion on the current benefits and areas for improvement. The overarching challenges encountered by SDIE concerning the feasibility of direct integration into contemporary practical settings are assessed, and issues relating to sustaining elevated evaporation rates under diverse environmental conditions are addressed.

Zinc hydroxyacetate and its transformation to nanocrystalline zinc oxide.

The synthesis of nanocrystalline ZnO by thermal decomposition of zinc hydroxyacetate, Zn(5)(OH)(8)(CH(3)CO(2))(2)·nH(2)O, was investigated. The decomposition process was examined using X-ray diffraction, thermogravimetric analysis, mass spectrometry, electron microscopy, Brunauer-Emmett-Teller surface area analysis, and solid-state NMR spectroscopy. Intermediate Zn(5)(OH)(8)(CH(3)CO(2))(2)·nH(2)O phases form at temperatures up to 110 °C from the starting compound Zn(5)(OH)(8)(CH(3)CO(2))(2)·2H(2)O by partial dehydration. At ∼110 °C, 4 equiv of ZnO and 1 equiv of Zn(CH(3)CO(2))(2) are formed. Further heating causes Zn(CH(3)CO(2))(2) to decompose to acetone, acetic acid, acetic anhydride, and ZnO. Notably, a portion of Zn(CH(3)CO(2))(2) sublimes during the process. Overall, the product of the calcination is equiaxed ZnO nanocrystals of 20-100 nm diameter.

Organic impurity profiling of 3,4-methylenedioxyamphetamine (MDA) synthesised from helional.

The organic impurity profile of 3,4-methylenedioxyamphetamine (MDA) synthesised from helional via the "twodogs" method was examined to identify route-specific and condition-specific impurities. The synthesis used a condensation reaction, followed by a Beckmann rearrangement, then Hofmann rearrangement, and then conversion to a hydrochloride salt. Two chlorinating agents were investigated for the Hofmann rearrangement reaction, trichloroisocyanuric acid (TCCA) and sodium hypochlorite. Three route-specific impurities were identified in MDA using TCCA, and two of these impurities were condition-specific such that the impurities that formed were dependent on the alcohol used as solvent. Three additional impurities were identified as non-route-specific as they have previously been identified in MDA synthesised from 3,4-methylenedioxycinnamic acid or piperonal. These non-route-specific impurities were also identified in MDA synthesised using sodium hypochlorite. No impurities were detected in MDA hydrochloride. This study identified route- and condition-specific organic impurities in MDA synthesised via the "twodogs" synthetic route using helional as starting material. The results in this study provide further understanding into the illicit synthesis of MDA and highlight the expanding nature of precursors used for illicit drug manufacture. It provides valuable information to decision makers to enact legislative measures and restrict precursors of concern.

Combinatorial stresses kill pathogenic Candida species.

Pathogenic microbes exist in dynamic niches and have evolved robust adaptive responses to promote survival in their hosts. The major fungal pathogens of humans, Candida albicans and Candida glabrata, are exposed to a range of environmental stresses in their hosts including osmotic, oxidative and nitrosative stresses. Significant efforts have been devoted to the characterization of the adaptive responses to each of these stresses. In the wild, cells are frequently exposed simultaneously to combinations of these stresses and yet the effects of such combinatorial stresses have not been explored. We have developed a common experimental platform to facilitate the comparison of combinatorial stress responses in C. glabrata and C. albicans. This platform is based on the growth of cells in buffered rich medium at 30°C, and was used to define relatively low, medium and high doses of osmotic (NaCl), oxidative (H(2)O(2)) and nitrosative stresses (e.g., dipropylenetriamine (DPTA)-NONOate). The effects of combinatorial stresses were compared with the corresponding individual stresses under these growth conditions. We show for the first time that certain combinations of combinatorial stress are especially potent in terms of their ability to kill C. albicans and C. glabrata and/or inhibit their growth. This was the case for combinations of osmotic plus oxidative stress and for oxidative plus nitrosative stress. We predict that combinatorial stresses may be highly significant in host defences against these pathogenic yeasts.

Highly stable gold nanolayer membrane for efficient solar water evaporation under a harsh environment.

Interfacial solar water evaporation has attracted tremendous attention for sunlight harvesting for water purification. However, salt formation and stability of the photothermal materials (PTMs) remain a challenge that need addressing before bringing this technology to real-world applications. In this work, a nanoscale thin film of gold (Au) on a polytetrafluoroethylene (PTFE) membrane has been prepared using a magnetic sputtering technique. The fabricated membrane displays a robust mechanical strength and chemical stability arising from the adhesiveness of the thin film Au nanolayer on the PTFE membrane as well as the chemical inertness of the noble metal PTM. The Au nanolayer/PTFE membrane with cellulose sponge substrate resulted in an evaporation rate of 0.88 kg m-2 h-1 under 1 sun intensity. Remarkable salt ion rejection of 99.9% has been obtained, meeting the required standard for drinking water. Moreover, the membrane exhibited excellent stability and reusability in natural seawater and high salinity brine (150 g/L) and even in severe conditions (acidic, basic, and oxidized). No noticeable salt formation was observed on the evaporator surface after the tests. These findings reveal promising prospects for using a magnetron sputtering technique to fabricate a stable photothermal membrane for seawater and high salinity brine desalination.

A long-life lithium-oxygen battery via a molecular quenching/mediating mechanism.

The advancement of lithium-oxygen (Li-O2) batteries has been hindered by challenges including low discharge capacity, poor energy efficiency, severe parasitic reactions, etc. We report an Li-O2 battery operated via a new quenching/mediating mechanism that relies on the direct chemical reactions between a versatile molecule and superoxide radical/Li2O2. The battery exhibits a 46-fold increase in discharge capacity, a low charge overpotential of 0.7 V, and an ultralong cycle life >1400 cycles. Featuring redox-active 2,2,6,6-tetramethyl-1-piperidinyloxy moieties bridged by a quenching-active perylene diimide backbone, the tailor-designed molecule acts as a redox mediator to catalyze discharge/charge reactions and serves as a reusable superoxide quencher to chemically react with superoxide species generated during battery operation. The all-in-one molecule can simultaneously tackle issues of parasitic reactions associated with superoxide radicals, singlet oxygen, high overpotentials, and lithium corrosion. The molecular design of multifunctional additives combining various capabilities opens a new avenue for developing high-performance Li-O2 batteries.

Sub-telomere directed gene expression during initiation of invasive aspergillosis.

Aspergillus fumigatus is a common mould whose spores are a component of the normal airborne flora. Immune dysfunction permits developmental growth of inhaled spores in the human lung causing aspergillosis, a significant threat to human health in the form of allergic, and life-threatening invasive infections. The success of A. fumigatus as a pathogen is unique among close phylogenetic relatives and is poorly characterised at the molecular level. Recent genome sequencing of several Aspergillus species provides an exceptional opportunity to analyse fungal virulence attributes within a genomic and evolutionary context. To identify genes preferentially expressed during adaptation to the mammalian host niche, we generated multiple gene expression profiles from minute samplings of A. fumigatus germlings during initiation of murine infection. They reveal a highly co-ordinated A. fumigatus gene expression programme, governing metabolic and physiological adaptation, which allows the organism to prosper within the mammalian niche. As functions of phylogenetic conservation and genetic locus, 28% and 30%, respectively, of the A. fumigatus subtelomeric and lineage-specific gene repertoires are induced relative to laboratory culture, and physically clustered genes including loci directing pseurotin, gliotoxin and siderophore biosyntheses are a prominent feature. Locationally biased A. fumigatus gene expression is not prompted by in vitro iron limitation, acid, alkaline, anaerobic or oxidative stress. However, subtelomeric gene expression is favoured following ex vivo neutrophil exposure and in comparative analyses of richly and poorly nourished laboratory cultured germlings. We found remarkable concordance between the A. fumigatus host-adaptation transcriptome and those resulting from in vitro iron depletion, alkaline shift, nitrogen starvation and loss of the methyltransferase LaeA. This first transcriptional snapshot of a fungal genome during initiation of mammalian infection provides the global perspective required to direct much-needed diagnostic and therapeutic strategies and reveals genome organisation and subtelomeric diversity as potential driving forces in the evolution of pathogenicity in the genus Aspergillus.

Natural Hydrogels Applied in Photodynamic Therapy.

Natural hydrogels are three-dimensional (3D) water-retaining materials with a skeleton consisting of natural polymers, their derivatives or mixtures. Natural hydrogels can provide sustained or controlled drug release and possess some unique properties of natural polymers, such as biodegradability, biocompatibility and some additional functions, such as CD44 targeting of hyaluronic acid. Natural hydrogels can be used with photosensitizers (PSs) in photodynamic therapy (PDT) to increase the range of applications. In the current review, the pertinent design variables are discussed along with a description of the categories of natural hydrogels available for PDT.

Organic impurity profiling of 3,4-methylenedioxymethamphetamine (MDMA) synthesised from catechol and eugenol via 4-allylcatechol.

This work examines organic impurity profiles of 3,4-methylenedioxymethamphetamine (MDMA) that has been synthesised from the "pre-precursors" catechol (1,2-dihydroxybenzene) and eugenol, via a safrole intermediate. MDMA was synthesised from the catechol- and eugenol-derived safrole intermediate via two routes, which resulted in the synthesis of MDMA from catechol via two routes (Route 1A and 1B) and from eugenol via two routes (Route 2A and 2B). Twelve organic impurities were identified in MDMA synthesised via Routes 1A and 1B, and eleven organic impurities were identified in MDMA synthesised via Routes 2A and 2B. Route specific organic impurities were identified in MDMA that indicated the "pre-precursors" catechol and eugenol were used in the respective synthetic routes. Route specific organic impurities were also identified in MDMA that indicated the route used to synthesise safrole from the "pre-precursor" and the route used to synthesise MDMA from safrole. Thus, the use of the "pre-precursors" catechol and eugenol and the synthetic route utilised could be ascertained by the organic impurity profiling of MDMA under the conditions used here.

Ruthenium phthalocyanine-bipyridyl dyads as sensitizers for dye-sensitized solar cells: dye coverage versus molecular efficiency.

The application of ruthenium phthalocyanine complexes as sensitizing dyes in dye-sensitized solar cells (DSCs) is explored. Four monomeric complexes are reported which vary in peripheral substitution and axial ligand anchoring groups. Sensitizing dyes containing two ruthenium centers are also presented. These dyads, which contain ruthenium phthalocyanine and bipyridyl chromophores, were prepared using a protection/deprotection strategy that allows for convenient purification. DSCs fabricated using the phthalocyanine complexes and dyads were less efficient than those incorporating a standard DSC dye. However, on the basis of the number of molecules bound to the TiO(2) electrode surfaces, several of the new complexes were more efficient at photocurrent generation. The results highlight the importance of molecular size, and thus the dye coverage of the electrode surface in the design of new sensitizing dyes.

Correction: Alopecia areata patients show deficiency of FOXP3+CD39+ T regulatory cells and clonotypic restriction of Treg TCRß-chain, which highlights the immunopathological aspect of the disease.

[This corrects the article DOI: 10.1371/journal.pone.0210308.].

Alopecia areata patients show deficiency of FOXP3+CD39+ T regulatory cells and clonotypic restriction of Treg TCRß-chain, which highlights the immunopathological aspect of the disease.

Alopecia areata (AA) is a hair loss disorder resulting from an autoimmune reaction against hair follicles. T-helper 1 cells are a major contributor to this disorder, but little is known about the role of T-regulatory cells (Tregs) in AA. Here, we analysed the distribution of circulating Treg subsets in twenty AA patients with active hair loss and fifteen healthy subjects by flow cytometry. The Treg suppressor HLA-DR+ subpopulation was significantly reduced in the patients (P<0.001) and there were significantly fewer cells expressing CD39 among the CD4+CD25+Foxp3+ Treg subpopulation in patients (P = 0.001). FOXP3 CD39 Treg cells were also reduced in hair follicles; by 75% in non-lesional skin and 90% in lesional skin, when compared to control healthy skin. To further characterise Treg cells in AA; Tregs (CD4+CD25+FOXP3+) were investigated for their TCRß sequence. PCR products analysed by Next Generation Sequencing techniques, showed that all frequent public clonotypes in AA Tregs were also present in controls at relatively similar frequencies, excepting two public clonotypes: CATSRDEGGLDEKLFF (V15 D1 J1-4) and CASRDGTGPSNYGYTF (V2 D1 J1-2), which were exclusively present in controls. This suggests that these Treg clonotypes may have a protective effect and that they may be an exciting subject for future therapeutic applications.