Outcome Following Debridement, Antibiotics, and Implant Retention in Hip Periprosthetic Joint Infection-An 18-Year Experience.

BACKGROUND: Debridement-antibiotics-and-implant-retention (DAIR) may be considered a suitable surgical option in periprosthetic joint infections (PJIs) with soundly fixed prostheses, despite chronicity. This study aims to define the long-term outcome following DAIR in hip PJI. METHODS: We reviewed all hip DAIRs performed between 1997 and 2013 (n = 122) to define long-term outcome and identify factors influencing it. Data recorded included patient demographics, medical history, type of DAIR performed (+/- exchange of modular components), and organisms identified. Outcome measures included complications and/or mortality rate, implant survivorship, and functional outcome (Oxford Hip Score). RESULTS: Most DAIRs (67%) were of primary arthroplasties and 60% were performed within 6 weeks from the index arthroplasty. Infection eradication was achieved in 68% of the first DAIR procedure. In 32 cases, more than one DAIR was required. Infection eradication was achieved in 85% of the cases (104/122) with the (single or multiple) DAIR approach. The most common complication was PJI-persistence (15%), followed by dislocation (14%). Very good functional outcomes were obtained, especially in primary arthroplasties. All streptococcus infections were resolved with DAIR and had better outcome. Twenty-one hips have been revised (17%) to-date, 16 were for persistence of PJI. The 10-y implant survivorship was 77%. Early PJI and exchanging modular components at DAIR were independent factors for a 4-fold increased infection eradication and improved long-term implant survival. CONCLUSION: DAIR is, therefore, a valuable option in the treatment of hip PJI, especially in the early postoperative period (≤6 weeks), with good outcomes. However, DAIR is associated with increased morbidity; further surgery may be necessary and instability may occur. Where possible, exchange of modular implants should be undertaken.

The John Charnley Award: Highly crosslinked polyethylene in total hip arthroplasty decreases long-term wear: a double-blind randomized trial.

BACKGROUND: The use of highly crosslinked polyethylene (HXLPE) is now commonplace for total hip arthroplasty. Hip simulator studies and short-term in vivo measurements suggest that the wear rate of some types of HXLPE is significantly less than conventional ultrahigh-molecular-weight polyethylene (UHMWPE). However, there are few long-term data to support its use. QUESTIONS/PURPOSES: The aim of this study was to measure the long-term steady-state wear of HXLPE compared with UHMWPE liners in a prospective, double-blind, randomized controlled trial using radiostereometric analysis. METHODS: Fifty-four patients were randomized to receive hip arthroplasties with either UHMWPE liners or HXLPE liners. Complete followup was available on 39 of these patients (72%). All patients received the same cemented stem and an uncemented acetabular component. Three-dimensional penetration of the head into the socket was determined at 10 years using a radiostereometric analysis system, which has an in vivo accuracy of <0.1 mm. Oxford Hip Scores were compared between the groups. RESULTS: At 10 years there was significantly less wear of HXLPE (0.003 mm/year; 95% confidence interval [CI], ±0.010; SD 0.023; range, -0.057 to 0.074) compared with UHMWPE (0.030 mm/year; 95% CI, ±0.012; p<0.001; SD 0.0.27; range, -0.001 to 0.164). The volumetric penetration from 1 to 10 years for the UHMWPE group was 98 mm3 (95% CI, ±46 mm3; SD 102 mm3; range, -4 to 430 mm3) compared with 14 mm3 (95% CI, ±40 mm3; SD 91 mm3; range, -189 to 242 mm3) for the HXLPE group (p=0.01). CONCLUSIONS: This study demonstrates that HXLPE has little detectable steady-state in vivo wear. This may result in fewer reoperations from loosening; however, careful clinical followup into the second decade still needs to be performed. LEVEL OF EVIDENCE: Level I, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Serial measurement of the C-reactive protein is a poor predictor of treatment outcome in prosthetic joint infection.

OBJECTIVES: Prosthetic joint infection is usually treated using surgery and antibiotics. The response to the treatment regimen is often evaluated using serial monitoring of plasma C-reactive protein (CRP) concentrations. In order to examine how useful this monitoring is, we calculated the sensitivity and specificity of CRP concentrations for predicting treatment failure. PATIENTS AND METHODS: We examined 3732 CRP measurements from 260 patients who were treated by either two-stage revision or debridement and retention. We tested the association between CRP concentration and outcome using logistic regression models, and assessed sensitivity and specificity by using receiver operator curves. RESULTS: The areas under receiver operator curves for CRP concentrations predicting outcome ranged from 0.55 to 0.65. CONCLUSIONS: CRP concentrations did not accurately predict treatment failure. Serial monitoring may not be of benefit.

"Asymptomatic" pseudotumors after metal-on-metal hip resurfacing arthroplasty: prevalence and metal ion study.

Symptomatic abnormal periprosthetic soft-tissue reactions ("pseudotumors") have been reported after metal-on-metal hip resurfacing arthroplasty (MoMHRA). The aims of this study were (1) to determine the prevalence of asymptomatic pseudotumors after MoMHRA and (2) to measure metal ion levels in these patients. A total of 201 hips in 158 patients were evaluated at a mean follow-up of 61 months (range, 36-88) using ultrasound/magnetic resonance imaging and serum/hip aspirate cobalt and chromium measurements. Pseudotumors found in 7 patients (4%) were associated with significantly higher cobalt and chromium levels and inferior functional scores. Elevated levels of cobalt and chromium ions suggest that pseudotumors are associated with increased wear generated from metal-on-metal articulations. Clinicians need to be aware of pseudotumors as a differential diagnosis during clinical evaluation of MoMHRA patients, and further imaging such as ultrasound or magnetic resonance imaging is recommended to confirm the diagnosis.

The management of periprosthetic fractures Oxford trimodular femoral stem. A survivorship study.

A consecutive series of 40 periprosthetic femoral fractures, treated with revision hip surgery using the Oxford trimodular femoral stem, were retrospectively studied, with an average follow-up of 7.9 years. Fractures were classified according to the Vancouver classification. There were 5 type B1 fractures, 28 type B2, and 7 type C. Radiographic union was achieved in 38 (95%) hips. The mean time to fracture union was 3.5 months. The prosthesis survival at 5 years was 95% (confidence interval, 88%-100%). Clinical results were good with a mean Oxford hip score of 30 (hip score maximum, 48). Complications included 1 nonunion, 1 infection, 1 dislocation, and 2 aseptic loosening. The Oxford trimodular femoral component is a safe and reliable prosthesis for the treatment of periprosthetic femoral fractures with satisfactory medium-term results.

A unique peri-prosthetic fracture pattern in well fixed femoral stems with polished, tapered, collarless design of total hip replacement.

Peri-prosthetic fractures (PPF) are a recognised complication following hip arthroplasty. Prosthesis design and type influence PPF pattern. Surgeons rely on classification systems, such as the Vancouver, to aid treatment planning. This study highlights a specific fracture pattern that occurs with cemented well-fixed polished, tapered, collarless (PTC) stems. We reviewed a consecutive series of 21 PPF around well fixed PTC stems. The majority of the fractures were classified pre-operatively as Vancouver B2 (14/21), but there were also B1 (6/21) and A type fractures. The B2 fractures had common radiological and intra-operative findings: a spiral fracture with extensive fragmentation of bone and cement, debonding of cement from the implant, cement fracture, and a well-fixed cement-bone interface. Reconstruction of these fractures was more difficult than suggested by the radiographs. Two of the six patients who were considered to have a Vancouver B1 fracture underwent open reduction and internal fixation (ORIF), and had treatment-related complications. Retrospective review of the radiographs showed subtle features, such as subsidence of the stem into the centraliser, that are characteristic of a B2 fracture pattern. In summary, it is important to recognise this fracture pattern around secure PTC stems in order to prevent misinterpretation of the fracture as a Vancouver B1 rather than a B2, leading to failure of treatment, and to alert the surgeon that complex reconstruction will be required because of the extensive fragmentation.

The in vivo linear and volumetric wear of hip resurfacing implants revised for pseudotumor.

BACKGROUND: Metal-on-metal arthroplasty-related pseudotumors can cause severe local destruction of bone and soft tissues. The cause of pseudotumors is unknown, although some authors have implicated metal wear debris. The aim of this study was to measure the location and magnitude of wear on resurfacing devices that were retrieved during revision procedures for pseudotumor (the pseudotumor group) and for other reasons (the control group). METHODS: We examined thirty-six hip-resurfacing implants, which were divided into two groups: eighteen implants from patients with a diagnosis of pseudotumor and eighteen control implants. Implant orientation and patient demographics were recorded. Three-dimensional, contactless metrology was used to scan the surface of the femoral and acetabular components to a resolution of 20 nm. Linear and volumetric wear were measured, and the components were examined for evidence of edge wear. RESULTS: There was three times more total linear wear and over six times more total volumetric wear of the femoral and acetabular components in the pseudotumor group as compared with that in the control group. The mean linear wear rate and standard deviation of the femoral components in the pseudotumor group (8.4 ± 8.7 µm/yr) were significantly greater than those in the control group (2.9 ± 3.9 µm/yr; p = 0.01). The mean volumetric wear rate of the femoral components was also significantly greater in the pseudotumor group (3.3 ± 5.7 mm3/yr) than it was in the control group (0.8 ± 1.2 mm3/yr; p = 0.009). Seventeen of eighteen subjects in the pseudotumor group had edge wear, compared with six of eighteen in the control group (p < 0.001). CONCLUSIONS: Implants that were retrieved because of pseudotumor had a significantly higher wear rate and prevalence of edge wear than the control implants did. There was a strong association between pseudotumor and the high levels of wear debris that are generated during edge-loading. However, not all patients with high wear developed pseudotumors, and not all pseudotumors had high wear; therefore, other factors are most likely involved in the cause of pseudotumors.

The seven-year wear of highly cross-linked polyethylene in total hip arthroplasty: a double-blind, randomized controlled trial using radiostereometric analysis.

BACKGROUND: The use of highly cross-linked polyethylene is now commonplace in total hip arthroplasty. Hip simulator studies and short-term in vivo measurements have suggested that the wear rate of highly cross-linked polyethylene is significantly less than that of conventional ultra-high molecular weight polyethylene. However, long-term data to support its use are limited. The aim of this study was to compare the intermediate-term steady-state wear of highly cross-linked polyethylene compared with that of conventional ultra-high molecular weight polyethylene acetabular liners in a prospective, double-blind, randomized controlled trial with use of radiostereometric analysis. METHODS: Fifty-four patients were randomized to receive hip replacements with either conventional ultra-high molecular weight polyethylene acetabular liners (Zimmer) or highly cross-linked polyethylene liners (Longevity; Zimmer). All patients received a cemented, collarless, polished, tapered femoral component (CPT; Zimmer) and an uncemented acetabular component (Trilogy; Zimmer). Clinical outcomes were assessed and the three-dimensional penetration of the head into the socket was determined for a minimum of seven years. Linear regression was used to calculate the steady-state wear rate following the creep-dominated penetration seen during the first year. RESULTS: At a minimum of seven years postoperatively, the mean total femoral head penetration was significantly lower in the highly cross-linked polyethylene group (0.33 mm; 95% confidence interval [CI], ±0.10 mm) than it was in the ultra-high molecular weight polyethylene group (0.55 mm; 95% CI, ±0.10 mm) (p = 0.005). The mean steady-state wear rate of highly cross-linked polyethylene was 0.005 mm/yr (95% CI, ±0.015 mm/yr), compared with 0.037 mm/yr (95% CI, ±0.019 mm/yr) for conventional ultra-high molecular weight polyethylene (p = 0.007). No patient in the highly cross-linked polyethylene group had a wear rate above the osteolysis threshold of 0.1 mm/yr, compared with 9% of patients in the ultra-high molecular weight polyethylene group. CONCLUSIONS: This study demonstrates that highly cross-linked polyethylene has a significantly lower steady-state wear rate compared with that of conventional ultra-high molecular weight polyethylene. Longer-term follow-up is required to determine if this will translate into improved clinical performance and longevity of these implants.

Hip resurfacing and pseudotumour.

Metal on metal hip resurfacing has been used widely over the last ten years but there has been recent concern about destructive soft tissue reactions, which have been called pseudotumours by some authors. This has generated considerable controversy. This review explains why pseudotumours occur after resurfacing and how they can be prevented. It also supports the continued use of resurfacing in appropriate patients by appropriately trained surgeons.

Does highly cross-linked polyethylene wear less than conventional polyethylene in total hip arthroplasty? A double-blind, randomized, and controlled trial using roentgen stereophotogrammetric analysis.

A prospective double-blind, randomized, and controlled trial was conducted using roentgen stereophotogrammetric analysis; 54 total hip arthroplasty patients were randomized to receive either highly cross-linked polyethylene (HXLPE) or standard ultra-high-molecular-weight polyethylene (UHMWPE) liners. The 3-dimensional penetration of the liner was determined over 2 years. For the first 3 months, both polyethylene types had a rapid penetration rate (HXLPE: 0.22 mm, SD = 0.17 mm; UHMWPE: 0.21 mm, SD = 0.15 mm; P = .78). After 3 months, the HXLPE penetration rate (0.06 mm/y, SD = 0.06 mm/y) was significantly lower than the UHMWPE penetration rate (0.10 mm/y, SD = 0.07 mm/y; P = .04). The penetration in the first 3 months was probably caused by creep or bedding in; from 3 months onward, much of the penetration was probably caused by wear. We conclude that HXLPE has a 40% lower wear rate as compared with UHMWPE, suggesting that it will perform better in the long term.