RESUMO
PURPOSE: The goal of this work was to develop phantoms for the optimization of pre-operative computed tomography (CT) scans of the prostate artery, which are used for embolization planning. METHODS: Acrylonitrile butadiene styrene (ABS) pellets were doped with barium sulfate and extruded into filaments suitable for 3D printing on a fused deposition modeling (FDM) printer. Cylinder phantoms were created to evaluate radiopacity as a function of doping percentage. Small-diameter tree phantoms were created to assess their composition and dimensional accuracy. A half-pelvis phantom was created using clinical CT images, to assess the printer's control over cortical bone thickness and cancellous bone attenuation. CT-derived prostate artery phantoms were created to simulate complex, contrast-filled arteries. RESULTS: A linear relationship (R = 0.998) was observed between barium sulfate added (0%-10% by weight), and radiopacity (-31 to 1454 Hounsfield Units [HU]). Micro-CT scans showed even distribution of the particles, with air pockets comprising 0.36% by volume. The small vessels were found to be oversized by a consistent amount of 0.08 mm. Micro-CT scans revealed that the phantoms' interiors were completely filled in. The maximum HU values of cortical bone in the phantom were lower than that of the filament, a result of CT image reconstruction. Creation of cancellous bone regions with lower HU values, using the printer's infill parameter, was successful. Direct volume renderings of the pelvis and prostate artery were similar to the clinical CT, with the exception that the surfaces of the phantom objects were not as smooth. CONCLUSIONS: It is possible to reliably create FDM 3D printer filaments with predictable radiopacity in a wide range of attenuation values, which can be used to print dimensionally accurate radiopaque objects derived from CT data. Phantoms of this type can be quickly and inexpensively developed to assess and optimize CT protocols for specific clinical applications.
Assuntos
Osso e Ossos/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/métodos , Pelve/diagnóstico por imagem , Imagens de Fantasmas , Próstata/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Humanos , Masculino , Impressão Tridimensional , Dosagem RadioterapêuticaRESUMO
Bone defects are extremely common in children with cleft-craniofacial conditions, especially those with alveolar cleft defects and cranial defects. This study used patient-specific 3D-printed molds derived from computed tomography and cryogel scaffold fabrication as a proof of concept for the creation of site-specific implants for bone reconstruction. Cryogel scaffolds are unique tissue-engineered constructs formed at sub-zero temperatures. When thawed, the resulting structure is macroporous, sponge-like, and mechanically durable. Due to these unique properties, cryogels have excellent potential for the treatment of patient-specific bone defects; however, there is little literature on their use in cleft-craniofacial defects. While 3D-printing technology currently lacks the spatial resolution to print the microstructure necessary for bone regeneration, it can be used to create site-specific molds. Thus, it is ideal to integrate these techniques for the fabrication of scaffolds with patient-specific geometry. Overall, all cryogels possessed appropriate geometry to allow for cell infiltration after 28 days. Additionally, suitable mechanical durability was demonstrated where, despite mold geometry, all cryogels could be compressed without exhibiting crack propagation. Such a patient-specific scaffold would be ideal in pediatric cleft-craniofacial defects, as these are complex 3D defects and children have less donor bone availability.