RESUMO
We report on the first, to the best of our knowledge, continuous-wave quasi three-level lasers emitting in the cyan-blue spectral range in praseodymium-doped crystalline materials. Applying Pr(3+):BaY2F8 as an active medium, up to 201 mW of output power at 495 nm could be obtained with a slope efficiency of 27% under pumping with an optically pumped semiconductor laser (2ω-OPSL) at 480 nm. In the same pumping scheme using Pr(3+):LiYF4, output powers up to 70 mW were realized at 491 and 500 nm, respectively. With Pr(3+):BaY2F8, diode-pumped laser operation with up to 11% slope efficiency and 44 mW output power was also achieved. In the latter case, detailed investigations on the temperature dependency of the laser output were conducted. Moreover, comparative experiments were carried out for the first time, to the best of our knowledge, with green-emitting Pr(3+):BaY2F8 lasers at 524 and 553 nm both under diode and 2ω-OPSL excitation.
RESUMO
We report the fabrication and visible laser operation of Pr,Mg:SrAl12O19 waveguides. Waveguiding structures were created by focusing the radiation of a femtosecond Ti:sapphire laser into bulk material. Guiding losses were determined to be as low as 0.12 dB cm(-1) at 632.8 nm. By employing a frequency-doubled optically pumped semiconductor laser, waveguide laser operation was realized at wavelengths of 525.3, 644.0, and 724.9 nm with output powers as high as 36, 1065, and 504 mW, respectively. To the best of our knowledge this is the first demonstration of green laser operation in a Pr(3+)-doped crystalline waveguide laser.