Global interpretation of novel alternative splicing events in human congenital pulmonary airway malformations: A pilot study.

Little is known about differentially expressed genes (DEGs) and alternative splicing (AS) landscapes in congenital lung malformations (CLMs). We applied reference-based assembly of sequencing reads from RNA sequencing (RNA-seq) libraries to identify DEGs and AS landscapes in the lesions and normal lung tissue from the most common types of CLMs, including congenital pulmonary airway malformation-Ⅰ (CPAM-Ⅰ), CPAM-Ⅱ, intralobar sequestration (ILS), and ILS with CPAM (ILS-CPAM). We analyzed the expression profiles and related biological functions of AS events (ASEs). We further constructed a co-expression regulatory network between RNA binding protein (RBP) genes and corresponding ASEs to explore the related pathways in the regulated network. Ten DEGs were identified in the four types of CLMs, including eight upregulated genes and two downregulated genes. Additionally, 16 differential ASEs were detected, including the genes MACF1, RFX2, and FBXL4. Gene ontology (GO) enrichment was mainly observed in embryonic visual malformation and apoptotic process, and the KEGG pathway mainly enriched in the PI3K/AKT signaling pathway. We also detected 13 differentially expressed RBPs among 1979 DEGs in CPAM-I, in which ASEs in the MACF1 gene and RBP genes TLR8 and PTRH1 were closely associated. Moreover, we confirmed that the expression levels of PTRH1, NSUN7, and DZIP1L abundantly increased and the expression levels of TLR8, MEF2A, and NIPBL decreased in the CPAM-I lung tissue compared with the controls. It is suggested that ASEs in different types of CLMs is prominently different from normal controls, and ASEs differences occurring in CPAM-I malformation tissue are dramatically different from other types, which demonstrates the complex pathogenesis of CLMs and provides foundations for future studies to elucidate the mechanisms of developing CLMs.

MicroRNA-27a-5p Inhibits Proliferation, Migration, and Invasion and Promotes Apoptosis of Wilms' Tumor Cell by Targeting PBOV1.

Wilms' tumor is the most common type of renal tumor in children. MicroRNAs (miRNAs) are small noncoding RNAs that play crucial regulatory roles in tumorigenesis. We aimed to study the expression profile and function of miR-27a-5p in Wilms' tumor. miR-27a-5p expression was downregulated in human Wilms' tumor tissues. Functionally, overexpression of miR-27a-5p promoted cell apoptosis of Wilms' tumor cells. Furthermore, upregulated miR-27a-5p delayed xenograft Wilms' tumor tumorigenesis in vivo. Bioinformatics analysis predicted that miR-27a-5p directly targeted the 3'-untranslated region (3'-UTR) of PBOV1, and luciferase reporter assay confirmed the interaction between miR-27a-5p and PBOV1. The function of PBOV1 in Wilms' tumor was evaluated in vitro, and knockdown of PBOV1 dampened cell migration. In addition, overexpression of PBOV1 antagonized the tumor-suppressive effect of miR-27a-5p in Wilms' tumor cells. Collectively, our findings reveal the regulatory axis of miR-27a-5p/PBOV1 in Wilms' tumor, and miR-27a-5p might serve as a novel therapeutic target in Wilms' tumor.

[Phosphorus Fractions and Quantitative Identification of Pollution Sources in Nanhai Wetland, Baotou].

In this study, total phosphorus (TP) and the phosphorus (P) fractions in the water and surface sediments of the Baotou Nanhai wetland in China were determined using molybdenum blue/ascorbic acid spectrophotometry and continuous extraction methods. An APCS-MLR receptor model was combined with correlation analysis (CA) and principal component analysis (PCA) to identify and quantify the pollution sources. The results showed ① differences in the pollution level of phosphorus between the surface sediments and water. The contribution of dissolved inorganic phosphorus (DIP) to TP in the water (WTP) was the lowest, while the contribution of calcium-bound phosphorus (HCl-P) to TP in the surface sediments (STP) was the largest in the study area. The surface sediments of the Nanhai Lake (L area) and the wetland plant area (P area) exhibited high bioavailability and the potential for releasing phosphorus into the water, which could result in eutrophication and is therefore of concern. ② The APCS-MLR receptor model indicated that the main pollution sources of phosphorus were industrial wastewater and domestic sewage (29.07%), and pesticides and fertilizers (29.00%). In addition, the degradation of animal and plant residues (18.49%) also contributed to pollution in the study area.

Magnetic field effects on shear and normal stresses in magnetorheological finishing.

We use a recent experimental technique to measure in situ shear and normal stresses during magnetorheological finishing (MRF) of a borosilicate glass over a range of magnetic fields. At low fields shear stresses increase with magnetic field, but become field-independent at higher magnetic fields. Micromechanical models of formation of magnetic particle chains suggest a complex behavior of magnetorheological (MR) fluids that combines fluid- and solid-like responses. We discuss the hypothesis that, at higher fields, slip occurs between magnetic particle chains and the immersed glass part, while the normal stress is governed by the MRF ribbon elasticity.

Process parameter effects on material removal in magnetorheological finishing of borosilicate glass.

We investigate the effects of processing parameters on material removal for borosilicate glass. Data are collected on a magnetorheological finishing (MRF) spot taking machine (STM) with a standard aqueous magnetorheological (MR) fluid. Normal and shear forces are measured simultaneously, in situ, with a dynamic dual load cell. Shear stress is found to be independent of nanodiamond concentration, penetration depth, magnetic field strength, and the relative velocity between the part and the rotating MR fluid ribbon. Shear stress, determined primarily by the material mechanical properties, dominates removal in MRF. The addition of nanodiamond abrasives greatly enhances the material removal efficiency, with the removal rate saturating at a high abrasive concentration. The volumetric removal rate (VRR) increases with penetration depth but is insensitive to magnetic field strength. The VRR is strongly correlated with the relative velocity between the ribbon and the part, as expected by the Preston equation. A modified removal rate model for MRF offers a better estimation of MRF removal capability by including nanodiamond concentration and penetration depth.

Shear stress in magnetorheological finishing for glasses.

We report in situ, simultaneous measurements of both drag and normal forces in magnetorheological finishing (MRF) for what is believed to be the first time, using a spot taking machine (STM) as a test bed to take MRF spots on stationary parts. The measurements are carried out over the entire area where material is being removed, i.e., the projected area of the MRF removal function/spot on the part surface, using a dual force sensor. This approach experimentally addresses the mechanisms governing material removal in MRF for optical glasses in terms of the hydrodynamic pressure and shear stress, applied by the hydrodynamic flow of magnetorheological fluid at the gap between the part surface and the STM wheel. This work demonstrates that the volumetric removal rate shows a positive linear dependence on shear stress. Shear stress exhibits a positive linear dependence on a material figure of merit that depends upon Young's modulus, fracture toughness, and hardness. A modified Preston's equation is proposed that better estimates MRF material removal rate for optical glasses by incorporating mechanical properties, shear stress, and velocity.

Zirconia-coated carbonyl-iron-particle-based magnetorheological fluid for polishing optical glasses and ceramics.

We report on magnetorheological finishing (MRF) spotting experiments performed on glasses and ceramics using a zirconia-coated carbonyl-iron (CI)-particle-based magnetorheological (MR) fluid. The zirconia-coated magnetic CI particles were prepared via sol-gel synthesis in kilogram quantities. The coating layer was approximately 50-100 nm thick, faceted in surface structure, and well adhered. Coated particles showed long-term stability against aqueous corrosion. "Free" nanocrystalline zirconia polishing abrasives were cogenerated in the coating process, resulting in an abrasive-charged powder for MRF. A viable MR fluid was prepared simply by adding water. Spot polishing tests were performed on a variety of optical glasses and ceramics over a period of nearly three weeks with no signs of MR fluid degradation or corrosion. Stable material removal rates and smooth surfaces inside spots were obtained.

Synthesis and corrosion study of zirconia-coated carbonyl iron particles.

This paper describes the surface modification of micrometer-sized magnetic carbonyl iron particles (CI) with zirconia from zirconium(IV) butoxide using a sol-gel method. Zirconia shells with various thicknesses and different grain sizes and shapes are coated on the surface of CI particles by changing the reaction conditions, such as the amounts of zirconia sol, nitric acid, and CI particles. A silica adhesive layer made from 3-aminopropyl trimethoxysilane (APTMS) can be introduced first onto the surface of CI particles in order to adjust both the size and the shape of zirconia crystals, and thus the roughness of the coating. The microanalyses on these coated particles are studied by field-emission scanning electron microscopy (FE-SEM) and X-ray-diffraction (XRD). Accelerated acid corrosion and air oxidation tests indicate that the coating process dramatically improved oxidation and acid corrosion resistances, which are critical issues in various applications of CI magnetic particles.