RESUMO
The potential of electrospray deposition, for the controlled preparation of particles for imaging in electron microscopes, is evaluated on various materials: from mono-modal suspensions of spherical particles to multimodal suspensions and to real-world industrial materials. It is shown that agglomeration is reduced substantially on the sample carrier, compared with conventional sample preparation techniques. For the first time, it is possible to assess the number concentration of a tri-modal polystyrene suspension by electron microscopy, due to the high deposition efficiency of the electrospray. We discovered that some suspension stabilizing surfactants form artifact particles during electrospraying. These can be avoided by optimizing the sprayed suspension.
RESUMO
The adsorption of porphyrin derivatives on a Au(111) surface was studied by scanning tunneling microscopy and spectroscopy at low temperatures in combination with density functional theory calculations. Different molecular appearances were found and could be assigned to the presence of single gold adatoms bonded by a coordination bond underneath the molecular monolayer, causing a characteristic change of the electronic structure of the molecules. Moreover, this interpretation could be confirmed by manipulation experiments of individual molecules on and off a single gold atom. This study provides a detailed understanding of the role of metal adatoms in surface-molecule bonding and anchoring and of the appearance of single molecules, and it should prove relevant for the imaging of related molecule-metal systems.
RESUMO
The isomerization behavior of photochromic molecular switches is strongly influenced by adsorption on metal surfaces. For (E)-3,5-di-tert-butyl-N-(3,5-di-tert-butylbenzylidene)aniline (abbreviated as TBI for tetra-tert-butyl imine), it is found that a layer adsorbed on Au(111) can undergo an isomerization from the trans to the cis and back to the trans configuration when continuously increasing the sample temperature and accordingly decreasing the sample coverage. The conformation and adsorption geometry of TBI are determined from near-edge X-ray absorption fine structure measurements in agreement with density functional theory calculations taking into account the van der Waals interaction between adsorbate and metal surface. The coverage- and temperature-controlled conformational transitions are reversible and are driven by the higher packing density of the less stable cis-isomer in combination with the low thermal activation barrier of the trans- to cis-isomerization typical for imine derivatives. This unexpected scenario is corroborated by thermal desorption and vibrational spectroscopy as well as scanning tunneling microscopy.
RESUMO
The volume-specific surface area (VSSA) of a particulate material is one of two apparently very different metrics recommended by the European Commission for a definition of "nanomaterial" for regulatory purposes: specifically, the VSSA metric may classify nanomaterials and non-nanomaterials differently than the median size in number metrics, depending on the chemical composition, size, polydispersity, shape, porosity, and aggregation of the particles in the powder. Here we evaluate the extent of agreement between classification by electron microscopy (EM) and classification by VSSA on a large set of diverse particulate substances that represent all the anticipated challenges except mixtures of different substances. EM and VSSA are determined in multiple labs to assess also the level of reproducibility. Based on the results obtained on highly characterized benchmark materials from the NanoDefine EU FP7 project, we derive a tiered screening strategy for the purpose of implementing the definition of nanomaterials. We finally apply the screening strategy to further industrial materials, which were classified correctly and left only borderline cases for EM. On platelet-shaped nanomaterials, VSSA is essential to prevent false-negative classification by EM. On porous materials, approaches involving extended adsorption isotherms prevent false positive classification by VSSA. We find no false negatives by VSSA, neither in Tier 1 nor in Tier 2, despite real-world industrial polydispersity and diverse composition, shape, and coatings. The VSSA screening strategy is recommended for inclusion in a technical guidance for the implementation of the definition. Graphical abstractWe evaluate the extent of agreement between classification by electron microscopy (EM) and classification by Volume-Specific Surface Area (VSSA) on a large set of diverse particulate substances. These represent the challenges anticipated for identification of nanomaterials by the European Commission recommendation for a definition of nanomaterials for regulatory purposes.
RESUMO
ABSTRACT: Currently established and projected regulatory frameworks require the classification of materials (whether nano or non-nano) as specified by respective definitions, most of which are based on the size of the constituent particles. This brings up the question if currently available techniques for particle size determination are capable of reliably classifying materials that potentially fall under these definitions. In this study, a wide variety of characterisation techniques, including counting, fractionating, and spectroscopic techniques, has been applied to the same set of materials under harmonised conditions. The selected materials comprised well-defined quality control materials (spherical, monodisperse) as well as industrial materials of complex shapes and considerable polydispersity. As a result, each technique could be evaluated with respect to the determination of the number-weighted median size. Recommendations on the most appropriate and efficient use of techniques for different types of material are given.
RESUMO
Molecular machines are a key component in the vision of molecular nanotechnology and have the potential to transport molecular species and cargo on surfaces. The motion of such machines should be triggered remotely, ultimately allowing a large number of molecules to be propelled by a single source, with light being an attractive stimulus. Here, we report upon the photoinduced translation of molecular machines across a surface by characterizing single molecules before and after illumination. Illumination of molecules containing a motor unit results in an enhancement in the diffusion of the molecules. The effect vanishes if an incompatible photon energy is used or if the motor unit is removed from the molecule, revealing that the enhanced motion is due to the presence of the wavelength-sensitive motor in each molecule.
RESUMO
Three different molecules, each containing two azobenzene switching units, were synthesized, successfully deposited onto a Au(111) surface by sublimation and studied by scanning tunneling microscopy at low temperatures. To investigate the influence of electronic coupling between the switching units as well as to the surface, the two azo moieties were connected either via π-conjugated para-phenylene or decoupling meta-phenylene bridges, and the number of tert-butyl groups was varied in the meta-phenylene-linked derivatives. Single molecules were found to be intact after deposition as identified by their characteristic appearance in STM images. Due to their mobility on the Au(111) surface at room temperature, the molecules spontaneously formed self-organized molecular arrangements that reflected their chemical structure. While lateral displacement of the molecules was accomplished by manipulation, trans-cis isomerization processes, typical for azobenzene switches, could not be induced.
RESUMO
A second generation motorized nanocar was designed, synthesized, and imaged. To verify structural integrity, NMR-based COSY, NOESY, DEPT, HSQC, and HMBC experiments were conducted on the intermediate motor. All signals in (1)H NMR were unambiguously assigned, and the results were consistent with the helical structure of the motor. The nanocar was deposited on a Cu(111) surface, and single intact molecules were imaged by scanning tunneling microscopy (STM) at 5.7 K, thereby paving the way for future single-molecule studies of this motorized nanocar atop planar substrates.
Assuntos
Imagem Molecular/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Teste de Materiais , Movimento (Física) , Tamanho da PartículaRESUMO
Molecules that undergo reversible isomerization between trans and cis states, typically upon illumination with light at appropriate wavelengths, represent an important class of molecular switches. In this combined scanning tunneling microscopy (STM) and high-resolution electron energy loss spectroscopy (HREELS) study, we report on self-assembled arrays of imine derivatives on a Au(111) surface. Most of the molecules are found in the trans state after deposition at room temperature, but many of them change their conformation upon heating, which we assign to switching to the cis state. As for many molecular switches, the trans isomer is the energetically more stable compound in solution, resulting in thermal cis to trans relaxation upon sufficient heating. On the surface, however, the number of cis isomers increases with temperature, pointing toward an "inverted" thermal isomerization behavior. The reason for this surface-mediated effect could be a stronger coupling, as compared to the trans state, of the central imine part of the molecule to the gold surface, which is sterically only possible in the cis state.