RESUMO
Based on the optical Magnus effect, the analytical expressions of the electromagnetic field that a spinning dielectric sphere illuminated by polarized plane waves are derived according to the "instantaneous rest-frame" hypothesis and Minkowski's theory. More attention is paid to the near field. The unusual optical phenomena in mesoscale spheres without material and illumination wave asymmetry that are the photonic hook (PH) and whispering gallery mode (WGM)-like resonance caused by rotation are explored. The impact of resonance scattering on PHs is further analyzed under this framework. The influence of non-reciprocal rotating dimensionless parameter γ on PH and resonance is emphasized. The results in this paper have extensive application prospects in mesotronics, particle manipulation, resonator design, mechatronics, and planetary exploration.
RESUMO
Optical energy flow inside a dielectric microsphere is usually co-directed with the optical wave vector. At the same time, if the optical field in a microsphere is in resonance with one of the high-quality spatial eigenmodes (whispering-gallery modes- WGMs), a region of reverse energy flow emerges in the shadow hemisphere. This area is of considerable practical interest due to increased optical trapping potential. In this Letter, we consider a perforated microsphere with an air-filled pinhole fabricated along the particle diameter and numerically analyze the peculiarities of WGM excitation in a nanostructured microsphere. A pinhole isolates the energy backflow region of a resonant mode and changes a perforated microsphere into an efficient optical tweezer. For the first time, to the best of our knowledge, a multiple enhancement of the energy backflow intensity in the pinhole at a WGM resonance is revealed and we discuss the ways for its manipulation.
RESUMO
In this Letter, we propose a new, to the best of our knowledge, proof-of-concept of optical nano-tweezers based on a pair of dielectric rectangular structures that are capable of generating a finite-volume in-plane optical capsule. Finite-difference time-domain simulations of light spatial distributions and optical trapping forces of a gold nanoparticle immersed in water demonstrate the physical concept of an in-plane subwavelength optical capsule integrated with a microfluidic mesoscale device. It is shown that the refractive index of and the distance between the two dielectric rectangular structures can effectively control the shape and axial position of the optical capsule. Such an in-plane mesoscale structure provides a new path for manipulating absorbing nano-particles or bio-particles in a compact planar architecture, and should thus lead to promising perspectives in lab-on-a-chip domains.
Assuntos
Dispositivos Lab-On-A-Chip , Nanopartículas Metálicas , Ouro , Pinças Ópticas , RefratometriaRESUMO
In this Letter, we report on a numerical study, fabrication, and experimental observations of photonic nanojet (PNJ) shaping by control of a tangential electric field component. Here the PNJs are generated by a single mesoscale micro-cube that is fabricated from polydimethylsiloxane, deposited on a silicon substrate and placed on thick metal screen at illuminating wavelengths of 405, 532, and 671 nm. It is shown that the length, focal length, and width of the PNJ can be significantly reduced in the presence of the metal masks along the side faces of the micro-cube. Experimental measurements of the PNJ imaging are performed by a scanning optical microscope with laser sources. Our experimental results are in reasonable agreement with simulation predictions of the finite-difference time-domain method. Due to the appearance of the metal masks, the PNJ focal length decreases 1.5 times, the PNJ decay length decreases 1.7 times, and the PNJ resolution increases 1.2 times. Such PNJs possess great potential in complex manipulation, including integrated plasmonic circuits, biosensing, and optical tweezers.
RESUMO
The physical origin of subwavelength photonic nanojet in specular-reflection mode (s-PNJ) is theoretically considered. This specific type of photonic nanojet (PNJ) emerges upon double focusing of a plane optical wave by a transparent dielectric microparticle located near a flat mirror. For the first time, to the best of our knowledge, we report a unique property of s-PNJ for increasing its focal length and intensity using circular-shaped microparticles with a refractive index ratio exceeding the known limiting value that fundamentally distinguishes s-PNJ from regular PNJ behavior. This may drastically increase the trapping potential of PNJ-based optical tweezers.
RESUMO
In this Letter, we report the experimental observations of a tunable curved photonic nanojet (photonic hook) generated by a 5 µm polydimethylsiloxane microcylinder deposited on a silicon substrate and illuminated by 405 nm laser beam. A moveable opaque aluminum-mask is mounted in front of the microcylinder implementing partial illumination and imparting spatial curvature to the photonic nanojet. Experimental results of main parameters (tilt angle, width, and intensity) of emerging photonic hooks exhibit close agreement with numerical predictions of the near-field optical structures. The experimentally measured full widths at half-maximum of photonic hooks are 0.48λ, 0.56λ, and 0.76λ for tilt angles of θ=0∘, 5.7°, and 20.1°, respectively. Photonic hooks possess great potential in complex manipulation such as super-resolution imaging, surface fabrication, and optomechanical manipulation along curved trajectories.
RESUMO
We propose and study a microstructure based on a dielectric cuboid placed on a thin metal film that can act as an efficient plasmonic lens allowing the focusing of surface plasmons at the subwavelength scale. Using numerical simulations of surface plasmon polariton (SPP) field intensity distributions, we observe high-intensity subwavelength spots and formation of the plasmonic nanojet (PJ) at the telecommunication wavelength of 1530 nm. The fabricated microstructure was characterized using amplitude and phase-resolved scattering-type scanning near-field optical microscopy. We show the first experimental observation of the PJ effect for the SPP waves. Such a novel, to the best of our knowledge, and simple platform can provide new pathways for plasmonics, high-resolution imaging, and biophotonics, as well as optical data storage.
RESUMO
This publisher's note contains corrections to Opt. Lett.45, 3244 (2020)OPLEDP0146-959210.1364/OL.391861.
RESUMO
A method of detecting dielectric objects hidden behind an opaque barrier located on a reflective background, based on the distortion of interference fringes, is proposed in this article. Experiments conducted in the millimeter wavelength range demonstrated the effectiveness of the method under consideration, which does not require a holographic image reconstruction. Such a system can be classified as contour imaging.
RESUMO
The image performance of acoustic and ultrasound sensors depends on several fundamental parameters such as depth of focus or lateral resolution. There are currently two different types of acoustic diffractive lenses: those that form a diffraction-limited spot with a shallow depth of focus (zone plates) and lenses that form an extended focus (quasi-Bessel beams). In this paper, we investigate a pupil-masked Soret zone plate, which allows the tunability of a normalized angular spectrum. It is shown that the depth of focus and the lateral resolution can be modified, without changing the lens structure, by choosing the size of the pupil mask. This effect is based on the transformation of spherically-converging waves into quasi-conical waves, due to the apodization of the central part of the zone plate. The theoretical analysis is verified with both numerical simulations and experimental measurements. A Soret zone plate immersed in water with D/2F = 2.5 and F = 4.5 λ changes its depth of focus from 2.84 λ to 5.9 λ and the lateral resolution increases from 0.81 λ to 0.64 λ at a frequency of 250 kHz, by modifying the pupil mask dimensions of the Soret zone plate.
RESUMO
Currently, phased arrays have found wide application in ultrasonic nondestructive testing. Volumetric results provided by the.
RESUMO
It is well known that electromagnetic radiation propagates along a straight line, but this common sense was broken by the artificial curved light-the Airy beam. In this Letter, we demonstrate a new type of curved light beam besides the Airy beam, the so-called "photonic hook." This photonic hook is a curved high-intensity focus by a dielectric trapezoid particle illuminated by a plane wave. The difference between the phase velocity and the interference of the waves inside the particle causes the phenomenon of focus bending.
RESUMO
In this study, we introduce what we believe is a novel holographic optical element called a chiral square Fresnel zone plate (CSFZP). The chirality is imposed on a square Fresnel zone plate (SFZP) using a nonclassical technique by rotating the half-period zones relative to one another. The rotation of the half-period zones, in turn, twists the side lobes of the diffraction pattern without altering the focusing properties inherent to a SFZP. As a consequence, the beam profile is hybrid, consisting of a strong central Gaussian focal spot with gradient force similar to that generated by a lens and twisted side lobes with orbital angular momentum. The optical fields at the focal plane were calculated and found to possess a whirlpool-phase profile and a twisted intensity profile. Analysis of the field variation along the direction of propagation revealed a spiraling phase and amplitude distribution. Poynting vector plot of the fields revealed the presence of angular momentum in the regions of chiral side lobes. The phase of the CSFZPs were displayed on a phase-only reflective spatial light modulator and illuminated using a laser. The intensity patterns recorded in the experiment match the calculated ones, with a strong central focal spot and twisted side lobes. The beam pattern was implemented in an optical trapping experiment and was found to possess particle trapping capabilities.
RESUMO
In this Letter, we demonstrate applicability of Babinet's principle of complementary diffractive structures for the formation of near-field photonic jets in the reflection mode. Structures, complementary to dielectric cuboids, are characterized with additional geometric and electromagnetic parameters compared to initial cuboids and, for this reason, offer more opportunities for the design of photonic jets with required properties. Babinet's structures allow control of such parameters of photonic jets as the focus length, width, length, maximal field intensity, and ellipticity of jets.
RESUMO
This paper pays attention to the broader interest of freezing water droplets in mesotronics, particularly to their use as a new all-optical device platform. Here, we show that a freezing mesoscale water droplet with a low Bond number can behave as fully biocompatible natural microlense to form a photonic hook for application in a tunable temperature-controlled optical switch. We first introduced and demonstrated the basic concepts of an optical switch without changes in the wavelength of illumination of a particle or any moving parts being involved. The principle of the operation of the switch is based on the temperature-induced phase change inside the water droplet's refractive index. The simulation results show that the optical isolation of switched channels for an optical switch with linear dimensions of about 15 λ3 based on a freezing water droplet can reach 10 dB in the process of temperature variation at a fixed wavelength. The use of freezing mesoscale droplets acting as a time-domain photonic hook generator open an intriguing route for optical switching in multifunctional green electronics tools for sensing, integrated optics and optical computers.
RESUMO
Tunable optical devices are of great interest as they offer adjustability to their functions. Temporal optics is a fast-evolving field, which may be useful both for revolutionizing basic research of time-dependent phenomena and for developing full optical devices. With increasing focus on ecological compatibility, bio-friendly alternatives are a key subject matter. Water in its various forms can open up new physical phenomena and unique applications in photonics and modern electronics. Water droplets freezing on cold surfaces are ubiquitous in nature. We propose and demonstrate the effectual generation of time domain self-bending photonic hook (time-PH) beams by using mesoscale freezing water droplet. The PH light bends near the shadow surface of the droplet into large curvature and angles superior to a conventional Airy beam. The key properties of the time-PH (length, curvature, beam waist) can be modified flexibly by changing the positions and curvature of the water-ice interface inside the droplet. Due to the modifying internal structure of freezing water droplets in real time, we showcase the dynamical curvature and trajectory control of the time-PH beams. Compared with the traditional methods, our phase-change- based materials (water and ice) of the mesoscale droplet have advantages of easy fabrication, natural materials, compact structure and low cost. Such PHs may have applications in many fields, including temporal optics and optical switching, microscopy, sensors, materials processing, nonlinear optics, biomedicine, and so on.
RESUMO
Adipose tissue (AT) optical properties for physiological temperatures and in vivo conditions are still insufficiently studied. The AT is composed mainly of packed cells close to spherical shape. It is a possible reason that AT demonstrates a very complicated spatial structure of reflected or transmitted light. It was shown with a cellular tissue phantom, is split into a fan of narrow tracks, originating from the insertion point and representing filament-like light distribution. The development of suitable approaches for describing light propagation in a AT is urgently needed. A mathematical model of the propagation of light through the layers of fat cells is proposed. It has been shown that the sharp local focusing of optical radiation (light localized near the shadow surface of the cells) and its cleavage by coupling whispering gallery modes depends on the optical thickness of the cell layer. The optical coherence tomography numerical simulation and experimental studies results demonstrate the importance of sharp local focusing in AT for understanding its optical properties for physiological conditions and at AT heating.
Assuntos
Adipócitos , Modelos Teóricos , Temperatura , Espalhamento de Radiação , Simulação por ComputadorRESUMO
The development of all-dielectric structures with high magnetic response at optical frequencies has become a matter of intense study in past years. However, magnetic effects are weak at optical frequencies due to the small value of the magnetic permeability of natural materials. To this end, natural dielectric materials are unemployable for practical "magnetic" applications in optics. We have shown for the first time that it is possible to induce intense magnetic concentric subwavelength "hot circles" in a dielectric mesoscale Janus particle. The basis of the Janus particle is a combination of the effects of a photonic jet, whispering-gallery waves, and the concept of solid immersion. Simulations show an (H/H0)2/(E/E0)2 contrast of more than 10, and maximal magnetic field intensity enhancement is more than 1000 for a wavelength-scaled particle with a refractive index n < 2 and a size parameter in the order of 30. This work may provide a new way to realize precise magnetic devices for integrated photonic circuits and light−matter interaction.
RESUMO
In this article, we study the optical force exerted on nanorods. In recent years, the capture of micro-nanoparticles has been a frontier topic in optics. A Photonic Jet (PJ) is an emerging subwavelength beam with excellent application prospects. This paper studies the optical force exerted by photonic jets generated by a plane wave illuminating a Generalized Luneburg Lens (GLLs) on nanorods. In the framework of the dipole approximation, the optical force on the nanorods is studied. The electric field of the photonic jet is calculated by the open-source software package DDSCAT developed based on the Discrete Dipole Approximation (DDA). In this paper, the effects of the nanorods' orientation and dielectric constant on the transverse force Fx and longitudinal force Fy are analyzed. Numerical results show that the maximum value of the positive force and the negative force are equal and appear alternately at the position of the photonic jet. Therefore, to capture anisotropic nanoscale-geometries (nanorods), it is necessary to adjust the position of GLLs continuously. It is worth emphasizing that manipulations with nanorods will make it possible to create new materials at the nanoscale.
RESUMO
In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure that multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. Additionally, to obtain the multi-directional effect of the cloaking structure, an optimized slice is mirror symmetrized through a radial perimeter. The three-dimensional (3D) finite-difference time-domain method is integrated with genetic optimization to achieve a cloaking design. In order to overcome the technological problems of the corresponding devices in the optical range and to experimentally demonstrate the proposed concept, our experiments were carried out on a scale model in the microwave range. The scaled proof-of-concept of the proposed structure is fabricated by 3D printing of polylactide material, and the brass metallic alloy is used as a perfect electrical conductor for microwave experiments. A good agreement between numerical and experimental results is achieved. The proposed design approach is not restricted only to multi-directional optical cloaking but can also be applied to different cloaking scenarios dealing with electromagnetic waves at nanoscales as well as other types such as acoustic waves. Using nanotechnology, our scale proof-of-concept research will take the next step toward the creation of "optical cloaking" devices.