Self-healing by design: universal kinetic model of strength recovery in self-healing ceramics.

We propose a new theoretical kinetic model of strength recovery by oxidation-induced self-healing of surface cracks in composites containing a healing agent (HA). The kinetics is a key parameter in the design of structural components that can self-heal the damage done in service. Based on three-dimensional (3D) observations of crack-gap filling, two crack-gap filling models, i.e., a bridging model and a tip-to-mouth filling model, are incorporated in the proposed kinetic model. These crack-gap filling models account for the microstructural features of the fracture surfaces, crack geometry, and oxidation kinetics of the healing-agent. Hence, the minimum and maximum remaining flaw sizes in the healed crack gaps are estimated for various healing temperatures, times, and oxygen partial pressure conditions. Further, the nonlinear elastic fracture mechanics suitable for small-sized remaining flaws, together with a statistical analysis of the original Weibull-type strength distribution, enables the prediction of upper and lower strength limits of the healed composites. Three sintered alumina matrix composites containing silicon carbide (SiC)-type HAs with various volume fractions and shapes, together with monolithic SiC ceramics, are considered. The strength of the healed-composite predicted by our model agrees well with the experimental values. This theoretical approach can be applied to HAs other than SiC and enables the design of self-healing ceramic components for various applications.

Intrinsic and Defect-Related Elastic Moduli of Boron Nitride Nanotubes As Revealed by in Situ Transmission Electron Microscopy.

Boron nitride nanotubes (BNNTs) are promising for mechanical applications owing to the high modulus, high strength, and inert chemical nature. However, up to now, precise evaluation of their elastic properties and their relation to defects have not been experimentally established. Herein, the intrinsic elastic modulus of BNNTs and its dependence on intrinsic and deliberately irradiation-induced extrinsic defects have been studied via an electric-field-induced high-order resonance technique inside a high-resolution transmission electron microscope (HRTEM). Resonances up to fourth order for normal modes and third order for parametric modes have been initiated in the cantilevered tubes, and the recorded frequencies are well consistent with the theoretical calculations with a discrepancy of ∼1%. The elastic moduli of the BNNTs measured from high-order resonance is about 906.2 GPa on average, with a standard deviation of 9.3%, which is found to be closely related to the intrinsic defect as cavities in the nanotube walls. Furthermore, electron irradiation in HRTEM has been used to study the effects of defects to elastic moduli and to evaluate the radiation resistance of the BNNTs. Along with an increase in the irradiation dose, the outer diameter has linearly reduced due to the knock-on effects. A defective shell with nearly constant thickness has been formed on the outer surface, and as a result, the elastic modulus decreases gradually to ∼662.9 GPa, which is still 3 times that of steel. Excellent intrinsic elastic properties and decent radiation-resistance prove that BNNTs could be a material of choice for applications in extreme environments, such as those existing in space.

Statistically Analyzed Photoresponse of Elastically Bent CdS Nanowires Probed by Light-Compatible In Situ High-Resolution TEM.

We demonstrate that high resolution transmission electron microscopy (HRTEM) paired with light illumination of a sample and its electrical probing can be utilized for the in situ study of initiated photocurrents in free-standing nanowires. Morphology, phase and crystallographic information from numerous individual CdS nanowires is obtained simultaneously with photocurrent measurements. Our results indicate that elastically bent CdS nanowires possessing a wurtzite structure show statistically unchanged values of ON/OFF (photocurrent/dark current) ratios. Photocurrent spectroscopy reveals red shifts of several nanometers in the cutoff wavelength after nanowire bending. This results from deformation-induced lattice strain and associated changes in the nanowire band structure, as confirmed by selected area electron diffraction (SAED) analyses and density functional tight binding (DFTB) simulations. The ON/OFF ratio stabilities and photocurrent spectroscopy shift of bent CdS nanowires are important clues for future flexible electronics, optoelectronics, and photovoltaics.

Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy.

The hollow core of a carbon nanotube (CNT) provides a unique opportunity to explore the physics, chemistry, biology, and metallurgy of different materials confined in such nanospace. Here, we investigate the nonequilibrium metallurgical processes taking place inside CNTs by in situ transmission electron microscopy using CNTs as nanoscale resistively heated crucibles having encapsulated metal nanowires/crystals in their channels. Because of nanometer size of the system and intimate contact between the CNTs and confined metals, an efficient heat transfer and high cooling rates (∼10(13) K/s) were achieved as a result of a flash bias pulse followed by system natural quenching, leading to the formation of disordered amorphous-like structures in iron, cobalt, and gold. An intermediate state between crystalline and amorphous phases was discovered, revealing a memory effect of local short-to-medium range order during these phase transitions. Furthermore, subsequent directional crystallization of an amorphous iron nanowire formed by this method was realized under controlled Joule heating. High-density crystalline defects were generated during crystallization due to a confinement effect from the CNT and severe plastic deformation involved.

Nanoscale characterization of the thermal interface resistance of a heat-sink composite material by in situ TEM.

We developed an original method of in situ nanoscale characterization of thermal resistance utilizing a high-resolution transmission electron microscope (HRTEM). The focused electron beam of the HRTEM was used as a contact-free heat source and a piezo-movable nanothermocouple was developed as a thermal detector. This method has a high flexibility of supplying thermal-flux directions for nano/microscale thermal conductivity analysis, and is a powerful way to probe the thermal properties of complex or composite materials. Using this method we performed reproducible measurements of electron beam-induced temperature changes in pre-selected sections of a heat-sink α-Al(2)O(3)/epoxy-based resin composite. Observed linear behavior of the temperature change in a filler reveals that Fourier's law holds even at such a mesoscopic scale. In addition, we successfully determined the thermal resistance of the nanoscale interfaces between neighboring α-Al(2)O(3) fillers to be 1.16 × 10(-8) m(2)K W(-1), which is 35 times larger than that of the fillers themselves. This method that we have discovered enables evaluation of thermal resistivity of composites on the nanoscale, combined with the ultimate spatial localization and resolution sample analysis capabilities that TEM entails.

Revealing the anomalous tensile properties of WS2 nanotubes by in situ transmission electron microscopy.

Mechanical properties and fracture behaviors of multiwalled WS2 nanotubes produced by large scale fluidized bed method were investigated under uniaxial tension using in situ transmission electron microscopy probing; these were directly correlated to the nanotube atomic structures. The tubes with the average outer diameter ∼40 nm sustained tensile force of ∼2949 nN and revealed fracture strength of ∼11.8 GPa. Surprisingly, these rather thick WS2 nanotubes could bear much higher loadings than the thin WS2 nanotubes with almost "defect-free" structures studied previously. In addition, the fracture strength of the "thick" nanotubes did not show common size dependent degradation when the tube diameters increased from ∼20 to ∼60 nm. HRTEM characterizations and real time observations revealed that the anomalous tensile properties are related to the intershell cross-linking and geometric constraints from the inverted cone-shaped tube cap structures, which resulted in the multishell loading and fracturing.

STEM in situ thermal wave observations for investigating thermal diffusivity in nanoscale materials and devices.

Practical techniques to identify heat routes at the nanoscale are required for the thermal control of microelectronic, thermoelectric, and photonic devices. Nanoscale thermometry using various approaches has been extensively investigated, yet a reliable method has not been finalized. We developed an original technique using thermal waves induced by a pulsed convergent electron beam in a scanning transmission electron microscopy (STEM) mode at room temperature. By quantifying the relative phase delay at each irradiated position, we demonstrate the heat transport within various samples with a spatial resolution of ~10 nm and a temperature resolution of 0.01 K. Phonon-surface scatterings were quantitatively confirmed due to the suppression of thermal diffusivity. The phonon-grain boundary scatterings and ballistic phonon transport near the pulsed convergent electron beam were also visualized.

Mechanical properties of Si nanowires as revealed by in situ transmission electron microscopy and molecular dynamics simulations.

Deformation and fracture mechanisms of ultrathin Si nanowires (NWs), with diameters of down to ~9 nm, under uniaxial tension and bending were investigated by using in situ transmission electron microscopy and molecular dynamics simulations. It was revealed that the mechanical behavior of Si NWs had been closely related to the wire diameter, loading conditions, and stress states. Under tension, Si NWs deformed elastically until abrupt brittle fracture. The tensile strength showed a clear size dependence, and the greatest strength was up to 11.3 GPa. In contrast, under bending, the Si NWs demonstrated considerable plasticity. Under a bending strain of <14%, they could repeatedly be bent without cracking along with a crystalline-to-amorphous phase transition. Under a larger strain of >20%, the cracks nucleated on the tensed side and propagated from the wire surface, whereas on the compressed side a plastic deformation took place because of dislocation activities and an amorphous transition.

Direct Probe of the Ferromagnetic Proximity Effect at the Interface of SnTe/Fe Heterostructure by Polarized Neutron Reflectometry.

Introducing magnetic order into a topological insulator (TI) system has attracted much attention with an expectation of realizing exotic phenomena such as the quantum anomalous Hall effect (QAHE) and axion insulator states. The magnetic proximity effect (MPE) is one of the promising schemes to induce the magnetic order on the surface of a TI without introducing disorder accompanied by doping magnetic impurities in the TI. In this study, we investigate the MPE at the interface of a heterostructure consisting of the topological crystalline insulator (TCI) SnTe and Fe by employing polarized neutron reflectometry. The ferromagnetic order penetrates ∼2.2 nm deep into the SnTe layer from the interface with Fe, which persists up to room temperature. This is induced by the MPE on the surface of the TCI preserving the coherent topological states without introducing the disorder by doping magnetic impurities. This would open up a way for realizing next-generation spintronics and quantum computational devices.

Local temperature measurements on nanoscale materials using a movable nanothermocouple assembled in a transmission electron microscope.

A nanoscale thermocouple consisting of merged Cu and Cu-Ni tips is developed for local temperature measurements on advanced nanomaterials by using a probing technique in a high-resolution transmission electron microscope (TEM) equipped with a double probe scanning tunneling microcopy (STM) unit. The fabricated nanothermocouple works as the so-called T-type thermocouple and displays a quick response and high spatial and thermal resolutions. A generated thermoelectromotive force which reflects rapid temperature changes controlled by electron beam intensity alternations on a metal nanoelectrode proves the technique's usefulness for high-precision local temperature measurements. The developed method demonstrates the effectiveness while also measuring temperature changes in Joule heated multi-walled carbon nanotubes (CNTs) and in a modeled electrical conductive composite nanosystem.

Transport of intensity equation method and its applications.

A phase retrieval technique based on a transport of intensity equation (TIE) is one of the defocus series reconstruction techniques in microscopy. Since it does not require any dedicated devices like a biprism, and only three defocus images are enough to retrieve phase information, it has been applied to observe magnetic fields, magnetic domains, electrostatic potentials and strains. It is also used to improve image resolution by correcting spherical aberration. This technique is simple and easy to use, but some artifacts often appear in the retrieved phase map. One should pay careful attention to the experimental conditions and the algorithms and boundary conditions used to solve the TIE. This paper reviews the principle of the TIE method, the algorithms used to solve it and application results in materials science.

A stable LaB6 nanoneedle field-emission point electron source.

A material with a low work function exhibiting field-emission of electrons has long been sought as an ideal point electron source to generate a coherent electron beam with high brightness, long service life, low energy spread, and especially stable emission current. The quality and performance of the electron source are now becoming limiting factors for further improving the spatial resolution and analytical capabilities of the electron microscope. While tungsten (W) is still the only material of choice as a practically usable field emission filament since it was identified more than six decades ago, its electron optical performance remains unsatisfactory, especially the poor emission stability (>5% per hour), rapid current decay (20% in 10 hours), and relatively large energy spread (0.4 eV), even in an extremely high vacuum (10-9 Pa). Herein, we report a LaB6 nanoneedle structure having a sharpened tip apex with a radius of curvature of about 10 nm that is fabricated and finished using a focused ion beam (FIB) and show that it can produce a field emission electron beam meeting the application criteria with a high reduced brightness (1010 A m-2 sr-1 V-1), small energy spread (0.2 eV), and especially high emission stability (<1% fluctuation in 16 hours without decay). It can now be used practically as a next-generation field-emission point electron source.

Semiconductor nanochannels in metallic carbon nanotubes by thermomechanical chirality alteration.

Carbon nanotubes have a helical structure wherein the chirality determines whether they are metallic or semiconducting. Using in situ transmission electron microscopy, we applied heating and mechanical strain to alter the local chirality and thereby control the electronic properties of individual single-wall carbon nanotubes. A transition trend toward a larger chiral angle region was observed and explained in terms of orientation-dependent dislocation formation energy. A controlled metal-to-semiconductor transition was realized to create nanotube transistors with a semiconducting nanotube channel covalently bonded between a metallic nanotube source and drain. Additionally, quantum transport at room temperature was demonstrated for the fabricated nanotube transistors with a channel length as short as 2.8 nanometers.

352 nm ultraviolet emission from high-quality crystalline AlN whiskers.

High-quality, crystalline AlN whiskers with large yield have been synthesized through the direct nitridation of Al vapor at high temperature. The AlN whiskers exhibited a strong and uniform ultraviolet emission at approximately 352 nm, which is notably shorter compared with the wavelength of previously reported one-dimensional AlN nanostructures. Energy filtered transmission electron microscope (TEM) analyses indicated that nitrogen deficiency and rather lower oxygen content in the AlN lattice might be responsible for the strong 352 nm ultraviolet emission.

Self-assembled ZnS nanowire arrays: synthesis, in situ Cu doping and field emission.

Well-aligned single-crystalline ZnS nanowire arrays have been grown on highly conductive Cu substrates through controlling the morphology evolution of self-patterned ZnS nanoparticles. The ZnS nanowires have sharp tips with an average size of approximately 30 nm and a length of approximately 3 microm. Field emission measurements demonstrated that the aligned ZnS nanowires grown on Cu substrates are excellent field emitters having a turn-on field as low as 2.92 V microm(-1) and a field-enhancement factor as high as 3400. The use of highly conductive metal substrate may promote the commercial applications of ZnS-based emitters in flat panel displays and other optoelectronic devices.

Quantitativeness of phase measurement by transport of intensity equation.

Based on the transport of intensity equation (TIE), a phase map can be readily retrieved from only three images of a focal series. The retrieval procedure does not require an iterative calculation and it is performed very fast with the use of the fast Fourier transform. However, it must be noted that sensitivity depends on the spatial frequency components and difficulties are encountered when phase information is retrieved to be of the same quality for all frequency components. Since the retrieved phase is influenced by conditions in which the focal series was taken, it is important to select the appropriate conditions and parameters used in this process. Optimal conditions to preserve the quantitativeness of phase maps measured by the TIE method are discussed theoretically and they are demonstrated by measuring phase shifts in silver particles. It was found that the high quantitativeness can be obtained by selecting appropriately a defocus difference and a high pass filter constant according to the frequency components for the objects.

A controllable and efficient method for the fabrication of a single HfC nanowire field-emission point electron source aided by low keV FIB milling.

A single hafnium carbide (HfC) nanowire field-induced electron emitter with a sharp tip apex is fabricated by Pt deposition and focused ion beam (FIB) milling. The structure of the electron emitter is characterized by scanning transmission electron microscopy (STEM) and atom probe tomography (APT). The HfC nanowire is single-crystalline with a thin oxide layer on its tip surface. The field emission properties are determined by using both in situ transmission electron microscopy (TEM) and a field-emission probe in a high-vacuum chamber. A high current of 173 nA was obtained at a low extraction voltage of 631 V with an emission gap of 5 mm. The emission current is stable at 60 nA for 100 min with a fluctuation of 0.7%. The deduced work function was 3.1 eV. It is suggested that the implanted Ga ions and the oxide layer induce more downward dipoles that are beneficial for lowering the work function and creating a stable surface. When the low keV FIB processing is applied, it takes within 30 minutes to finish a HfC nanowire emitter, establishing an efficient procedure for the preparation of nanowire emitters. These results provide a controllable and fast production method for the fabrication of single nanowire field-emission point electron sources.

Electrical conduction and field emission of a single-crystalline GdB44Si2 nanowire.

The electronic transport and field emission properties of a single-crystalline GdB44Si2 nanowire are studied. The atomic structure and elemental composition of the GdB44Si2 nanowire are characterized by transmission electron microscopy (TEM) using atomic imaging, energy-dispersive X-ray spectroscopy (EDS), and electron energy-loss spectroscopic (EELS) mapping. The electrical conductivity of the single GdB44Si2 nanowire is in the range of 46.8-60.1 S m-1. The in situ TEM field emission measurement reveals that it has a low work function of 2.4 eV. To realize a converged electron emission, a field evaporation pretreatment was used to clean the emission surface and to make a sharpened tip. The field emission probe measurement results show that the electron emission from the sharp GdB44Si2 nanowire is converged to a single field emission spot and it has a work function of 2.6 eV which is in agreement with the in situ TEM measurement. The stability of field emission current is also very good with a fluctuation of 1.4% in 20 min. With a low work function and stable emission current, the GdB44Si2 nanowire shows great promise for field emission applications.

Crystallography and elasticity of individual GaN nanotubes.

High-purity, crystalline [001]-oriented GaN nanotubes with outer diameters of 200 nm or more, rough surfaces and irregular internal channels were synthesized under epitaxial growth on [001]-oriented sapphire substrates. Elastic property measurements on free-standing individual GaN nanotubes, using the in situ transmission electron microscopy (TEM) electromechanical resonance technique, pointed at an average Young's modulus E of 37 GPa and minimum quality factor of 320. These numbers are notably lower than those for previously reported GaN nanowires. The crystallography and chemistry of the GaN nanotubes were analyzed using TEM and energy dispersion x-ray spectroscopy (EDS). It is suggested that the lowered Young's modulus and quality factor of the nanotubes are mainly due to the surface roughness and defectiveness.

The synthesis, structure and cathodoluminescence of ellipsoid-shaped ZnGa2O4 nanorods.

We fabricated ellipsoid-shaped ZnGa(2)O(4) nanorods using a newly-designed chemical vapor deposition (CVD) process, different from the conventional methods. The optical properties of nanorods were studied using cathodoluminescence (CL) measurements. The nanorods displayed three distinct emissions centered at 360, 450 and 550 nm. The luminescence mechanism is thoroughly discussed and explained based on a detailed structural and compositional study with a transmission electron microscope (TEM) equipped with an electron energy loss spectrometer (EELS).