[A Case of Remnant Gastric Cancer Occurring 12 Years after Surgery That Was Successfully Treated with Radiation Therapy].

A 59-year-old woman had a history of distal gastrectomy and D2 dissection in May 200X for advanced gastric cancer(GC) in the antrum area. The pathological stage was poorly differentiated, T2(SS), N2, H0, P0, CY0, M0, pStage ⅢA. After administration of S-1 for 1 year as adjuvant chemotherapy, the patient underwent surveillance with no recurrence. However, remnant GC was diagnosed in April 200X+12. Considering that there was no indication for curative resection due to severe invasion of the proper hepatic artery, gastrojejunostomy was performed for the anastomotic stenosis. Although the patient was administered 3 courses of S-1 plus oxaliplatin therapy as first-line treatment, partial response was not achieved. Therefore, chemoradiotherapy(CRT)with capecitabine was administered for local tumor control. Complete response was achieved, and the patient underwent surveillance with no recurrence 16 months after the recurrence. There were no serious acute adverse events(AEs)during CRT and late AEs after CRT. The patient was successfully treated with CRT for locally advanced remnant GC. Although there is no standard treatment for locally advanced remnant GC, this case showed the effectiveness of CRT.

Numerical investigation of side emission from large-area vertical-cavity surface-emitting lasers.

For large-area ion-implanted vertical-cavity surface-emitting lasers (VCSELs), side emission from the edges of a chip disturbs the laser emission of a VCSEL mode, and suppression of it is fundamental. In this paper, we present results of a numerical investigation of the side emission from large-area VCSELs. We have modeled a VCSEL structure by an infinitely broad layer structure with mirror loss at the edge surfaces. Estimated threshold gains indicate that laser emission occurs either in a VCSEL mode or in an edge-emitting Fabry-Perot (EEFP) mode. Calculated emitter length dependence of the threshold gain of these modes shows good agreement with experimental results, and the side emission is verified to be the laser emission of the EEFP mode. We have also discussed the way to suppress the side emission and confirmed that our recent achievement of over 200 W quasi-continuous-wave output from an ion-implanted VCSEL array is due to antireflection coatings of the edges and introduction of optical losses in ex-emitter regions.

Multiplexed fitness profiling by RB-TnSeq elucidates pathways for lignin-related aromatic catabolism in Sphingobium sp. SYK-6.

Bioconversion of lignin-related aromatic compounds relies on robust catabolic pathways in microbes. Sphingobium sp. SYK-6 (SYK-6) is a well-characterized aromatic catabolic organism that has served as a model for microbial lignin conversion, and its utility as a biocatalyst could potentially be further improved by genome-wide metabolic analyses. To this end, we generate a randomly barcoded transposon insertion mutant (RB-TnSeq) library to study gene function in SYK-6. The library is enriched under dozens of enrichment conditions to quantify gene fitness. Several known aromatic catabolic pathways are confirmed, and RB-TnSeq affords additional detail on the genome-wide effects of each enrichment condition. Selected genes are further examined in SYK-6 or Pseudomonas putida KT2440, leading to the identification of new gene functions. The findings from this study further elucidate the metabolism of SYK-6, while also providing targets for future metabolic engineering in this organism or other hosts for the biological valorization of lignin.

High power density vertical-cavity surface-emitting lasers with ion implanted isolated current aperture.

We report on GaAs-based high power density vertical-cavity surface-emitting laser diodes (VCSELs) with ion implanted isolated current apertures. A continuous-wave output power of over 380 mW and the power density of 4.9 kW/cm2 have been achieved at 15 °C from the 100-µm-diameter aperture, which is the highest output characteristic ever reported for an ion implanted VCSEL. A high background suppression ratio of over 40 dB has also been obtained at the emission wavelength of 970 nm. The ion implantation technique provides an excellent current isolation in the apertures and would be a key to realize high power output from a VCSEL array.

A novel alkaline esterase from Sporosarcina sp. nov. strain eSP04 catalyzing the hydrolysis of a wide variety of aryl-carboxylic acid esters.

A novel esterase showing activity specific for esters of aryl-carboxylic acids was discovered in Sporosarcina sp. nov., which was identified by the 16S rDNA sequencing method in addition to morphological and physiological analyses. The aryl-carboxylesterase (named EstAC) was purified 780-fold from crude cell extracts by a 5-step procedure. EstAC was characterized as a monomeric protein with a molecular weight of 43,000, an optimum pH of around 9.0, and an optimum temperature of 40 °C. The pH optimum and the effects of inhibitors together with an internal amino acid sequence suggested that EstAC is a member of family VIII esterases. EstAC was found to be highly active on a wide variety of substrates such as alkyl benzoates, alkyl phenylacetates, ethyl α- or ß-substituted phenylpropionates, dialkyl terephthalates, dimethyl isophthalate, and ethylene glycol dibenzoate. However, monomethyl terephthalate was not hydrolyzed. It was suggested that EstAC had 4-hydroxybenzoyl and cinnamoyl esterase activities as well.

Evaluation of a newly-developed immunochromatography strip test for diagnosing dermatophytosis.

BACKGROUND: Traditionally, dermatophytosis, a common disease affecting millions of people world-wide, has been diagnosed by direct microscopy and fungal culture. The immunochromatography (ICG) strip test was recently developed. METHODS: We compared the performance of the ICG strip test for the detection of dermatophytes in samples from human skin and nails with direct microscopy. The 160 samples, consisting of 88 skin and 72 nail specimens, were subjected to direct microscopy study using a 20% KOH solution and to examination with the ICG strip test. Of 160 samples, 18 were examined by fungal culture using Sabouraud dextrose agar medium. RESULTS: We found that the overall sensitivity and specificity of the ICG test were 83.5% and 66.7%; they were 82.1% and 76.2% for the 88 skin and 85.4% and 58.3% for the 72 nail specimens, respectively. CONCLUSIONS: Our findings indicate that the efficacy of the ICG test is comparable to direct microscopy for the detection of dermatophytes. Performance of the assay was easy, and results were available quickly. We suggest that it is an effective tool for dermatophytosis screening.

213 W average power of 2.4 GW pulsed thermally controlled Nd:glass zigzag slab laser with a stimulated Brillouin scattering mirror.

We report a high-average-power and high-pulse-energy diode-pumped Nd:glass laser amplifier system consisting of two thermally-edge-controlled zigzag slab amplifiers and a stimulated Brillouin scattering mirror. This phase-conjugated system produces an average power of 213 W at 10 Hz in a 8.9 ns pulse (2.4 GW peak power) with an optical-to-optical conversion efficiency of 11.7% and a near-diffraction-limited beam. To the best of our knowledge, this is the highest performance from a Nd:glass-based laser amplifier system ever built.

Substantially monodispersed poly(epsilon-L-lysine)s frequently occurred in newly isolated strains of Streptomyces sp.

The presence of poly(epsilon-L-lysine) (epsilon-PL) was found quite frequently by screening various strains of Streptomyces sp. Most of the ten newly obtained epsilon-PLs, when they were produced from glucose, showed a polydispersity index of Mw/Mn = 1.01 using ion-pair chromatography analysis. The polymers were classified into five groups according to their chain lengths. The average numbers of residues in the five groups were 32, 28, 25, 19, and 16, respectively. The use of glycerol instead of glucose resulted in decreases of 10 to 20% in the Mn and slight increases in the Mw/Mn. These observations indicated the chain length and polydispersity of epsilon-PL were primarily determined by each producer strain. Proton and 13C NMR analysis revealed the signals of glycerol-derived ester at the C terminus of the polymer from several producers including the first discovered S. albulus strain, although the percentages of the ester were low under our culture conditions. These results, coupled with the previous observation that SO4(2-) was essential for the polymer production, led to discussion on the mechanistic aspects of monomer activation, elongation, and termination in the biosynthesis of epsilon-PL.

Biosynthesis of poly(epsilon-L-lysine)s in two newly isolated strains of Streptomyces sp.

The biosynthesis of poly(epsilon-L-lysine) (epsilon-PL) in the two newly isolated strains of Streptomyces lydicus USE-11 (USE-11) and Streptomyces sp. USE-51 (USE-51) was studied by a newly developed two-stage culture method of cell growth at pH 6.8 and epsilon-PL production at pH 4.5. USE-11 synthesized epsilon-PL consisting of about 28 residues at a high production level, whereas USE-51 did the polymer with 15 ones at a low level. The secreted epsilon-PLs in culture media were digested in a neutral pH range with a peptide hydrolase(s) produced by the epsilon-PL producers. The optimum production levels were presumed to be dependent upon the inherent epsilon-PL synthesis machinery of each producer. The production in USE-51 was sharply dependent upon cell density as was often observed in the production of antibiotics, whereas that in USE-11 was scarcely affected by the density. The SO(4)(2-) was found to be essential for the epsilon-PL production in both strains. This might suggest the involvement of a thiol group in the polymerization reactions including the activation of L-lysine. This study indicates that USE-11 is a most suitable strain for the exploration of the epsilon-PL biosynthesis at the molecular level as well as for the technical applications.