Evaluation of solar photovoltaic carport canopy with electric vehicle charging potential.

While sustainable mobility and decarbonization of transportation sector are among the most comprehensive solutions to the problem of climate change, electric vehicles (EV) are becoming increasingly popular as the future mode of transport. In this study, the integration of a solar carport canopy to a potential EV charging station is analyzed using various operating conditions. A detailed analysis has been provided for the carport located in southern Taiwan, Kaohsiung city, where electricity generation, emission impacts, and financial analysis of the solar EV charging station are discussed. The results of a case study showed a potential of 140 MWh/year of solar energy yield, which could provide solar electricity of more than 3000 vehicles per month with 1-h parking time, generating 94% lower total carbon dioxide emission than the electricity produced from traditional grid methods. Taken into account the impact of carbon tax implementation on driver economics, the results demonstrated the viability of such photovoltaic (PV)-based charging stations, particularly for possible higher carbon tax scenarios in the future. The presented results can be implemented on a larger scale, offering guidelines and tools for constructing solar-powered EV charging station infrastructure.

Adsorption of DDT and PCB by Nanomaterials from Residual Soil.

This paper presents the findings of a study on adsorption of dichlorodiphenythreechloroethen (DDT) and polychlorinated biphenyls (PCBs) on three nanomaterials including Multi walled Carbon Nanotube (MWNT), nano-clay and nano-alumina. DDT and PCBs are of significant concern due their high toxicity and long environmental half-lives. Experiments were conducted using batch adsorption procedures at different DDT and PCBs concentrations, from 10 to 60 mg/L. The amounts of MWNT, nano-clay and Nano-alumina used were 0.25%, 0.50%, 0.75%, 1%, 2% and 10%. The adsorption of PCBs solution onto the MWNT, nano-clay and nano-alumina was characterized by an initial rapid adsorption which eventually became constant within 22, 20, and 17 hours, respectively. The adsorption of DDT solution onto the MWNT, nano-clay and nano-alumina was also characterized by an initial rapid adsorption which gradually became constant within 22, 22 and 16 hours, respectively. Results of this study indicated that MWNT was a better adsorbent material compared to nano-clay and nano-alumina for both contaminants in this study. While at 10% of MWNT 88.9% and 77% of DDT and PCB were removed by MWNT, respectively. The effect of pH and temperature were also investigated.

Electrochemical Detection of Nucleic Acids Using Three-Dimensional Graphene Screen-Printed Electrodes.

Electrochemical approaches, along with miniaturization of electrodes, are increasingly being employed to detect and quantify nucleic acid biomarkers. Miniaturization of the electrodes is achieved through the use of screen-printed electrodes (SPEs), which consist of one to a few dozen sets of electrodes, or by utilizing printed circuit boards. Electrode materials used in SPEs include glassy carbon (Chiang H-C, Wang Y, Zhang Q, Levon K, Biosensors (Basel) 9:2-11, 2019), platinum, carbon, and graphene (Cheng FF, He TT, Miao HT, Shi JJ, Jiang LP, Zhu JJ, ACS Appl Mater Interfaces 7:2979-2985, 2015). There are numerous modifications to the electrode surfaces as well (Cheng FF, He TT, Miao HT, Shi JJ, Jiang LP, Zhu JJ, ACS Appl Mater Interfaces 7:2979-2985, 2015). These approaches offer distinct advantages, primarily due to their demonstrated superior limit of detection without amplification. Using the SPEs and potentiostats, we can detect cells, proteins, DNA, and RNA concentrations in the nanomolar (nM) to attomolar (aM) range. The focus of this chapter is to describe the basic approach adopted for the use of SPEs for nucleic acid measurement.