Thermoreversible Carbamazepine In Situ Gel for Intranasal Delivery: Development and In Vitro, Ex Vivo Evaluation.

Over the past decade, intranasal (IN) delivery has been gaining attention as an alternative approach to conventional drug delivery routes targeting the brain. Carbamazepine (CBZ) is available as an orally ingestible formulation. The present study aims to develop a thermoreversible in situ gelling system for delivering CBZ via IN route. A cold method of synthesis has been used to tailor and optimize the thermoreversible gel composition, using poloxamer 407 (P407) (15-20% w/v) and iota carrageenan (É©-Cg) (0.15-0.25% w/v). The developed in situ gel showed gelation temperatures (28-33°C), pH (4.5-6.5), rheological properties (pseudoplastic, shear thinning), and mucoadhesive strength (1755.78-2495.05 dyne/cm2). The in vitro release study has shown sustained release behavior (24 h) for gel, containing significant retardation of CBZ release. The release kinetics fit to the Korsmeyer-Peppas model, suggesting the non-Fickian diffusion type controlled release behavior. Ex vivo permeation through goat nasal mucosa showed sustained release from the gel containing 18% P407 with the highest cumulative drug permeated (243.94 µg/cm2) and a permeation flux of 10.16 µg/cm2/h. After treatment with CBZ in situ gel, the barrier function of nasal mucosa remained unaffected. Permeation through goat nasal mucosa using in situ gel has demonstrated a harmless nasal delivery, which can provide a new dimension to deliver CBZ directly to the brain bypassing the blood-brain barrier.

Optimization and Formulation of Fucoxanthin-Loaded Microsphere (F-LM) Using Response Surface Methodology (RSM) and Analysis of Its Fucoxanthin Release Profile.

Fucoxanthin has interesting anticancer activity, but is insoluble in water, hindering its use as a drug. Microencapsulation is used as a technique for improving drug delivery. This study aimed to formulate fucoxanthin-loaded microspheres (F-LM) for anticancer treatment of H1299 cancer cell lines and optimize particle size (PS) and encapsulation efficiency (EE). Using response surface methodology (RSM), a face centered central composite design (FCCCD) was designed with three factors: Polyvinylalcohol (PVA), poly(d,l-lactic-co-glycolic acid) (PLGA), and fucoxanthin concentration. F-LM was produced using a modified double-emulsion solvent evaporation method. The F-LM were characterized for release profile, release kinetics, and degradation pattern. Optimal F-LM PS and EE of 9.18 µm and 33.09%, respectively, with good surface morphology, were achieved from a 0.5% (w/v) PVA, 6.0% (w/v) PLGA, 200 µg/mL fucoxanthin formulation at a homogenization speed of 20,500 rpm. PVA concentration was the most significant factor (p < 0.05) affecting PS. Meanwhile, EE was significantly affected by interaction between the three factors: PVA, PLGA, and fucoxanthin. In vitro release curve showed fucoxanthin had a high burst release (38.3%) at the first hour, followed by a sustained release stage reaching (79.1%) within 2 months. Release kinetics followed a diffusion pattern predominantly controlled by the Higuchi model. Biodegradability studies based on surface morphology changes on the surface of the F-LM, show that morphology changed within the first hour, and F-LM completely degraded within 2 months. RSM under FCCCD design improved the difference between the lowest and highest responses, with good correlation between observed and predicted values for PS and EE of F-LM.

Co-encapsulation of Nigella sativa oil and plasmid DNA for enhanced gene therapy of Alzheimer's disease.

Alzheimer disease involves genetic and non-genetic factors and hence it is rational to be treated with genetic and non-genetic therapeutic agents. Nigella sativa has multiple therapeutic properties including neuroregeneration. Nigella sativa oil (NSO) was encapsulated in PLGA nanoparticles and pDNA was loaded either by adsorption on chitosan-modified particles or encapsulation within PLGA nanoparticles. The particle size and zeta potential of NSO-pDNA-chitosan-PLGA nanoparticles were highly dependent on the medium and exhibited high burst release. Meanwhile, NSO-pDNA-PLGA nanoparticles were more consistent with lower burst release. The fabricated nanoparticles revealed the expected outcomes of both pDNA and NSO. The pDNA transfected N2a cell while the encapsulated NSO promoted neurite outgrowth that is crucial for neuroregeneration. Results from this study suggest that NSO could be added to the gene delivery carrier to enhance treatment benefits for Alzheimer disease.

Cellular uptake of Nigella sativa oil-PLGA microparticle by PC-12 cell line.

The aim of this study is to investigate the cell uptake of Nigella sativa oil (NSO)-PLGA microparticle by neuron-like PC-12 cells in comparison to surfactants; hydrophilic (Tween 80 & Triton X100) and hydrophobic (Span 80). Solvent evaporation was used to precisely control the size, zeta potential and morphology of the particle. The results revealed varying efficiencies of the cell uptake by PC-12 cells, which may be partially attributed to the surface hydrophobicity of the microparticles. Interestingly, the uptake efficiency of PC-12 cells was higher with the more hydrophilic microparticle. NSO microparticle showed evidence of being preferably internalised by mitotic cells. Tween 80 microparticle showed the highest cell uptake efficiency with a concentration-dependent pattern suggesting its use as uptake enhancer for non-scavenging cells. In conclusion, PC-12 cells can take up NSO-PLGA microparticle which may have potential in the treatment of neurodegenerative disease.

Microencapsulation of alpha-mangostin into PLGA microspheres and optimization using response surface methodology intended for pulmonary delivery.

Documented to exhibit cytotoxicity and poor oral bioavailability, alpha-mangostin was encapsulated into PLGA microspheres with optimization of formulation using response surface methodology. Mixed levels of four factors Face central composite design was employed to evaluate critical formulation variables. With 30 runs, optimized formula was 1% w/v polyvinyl alcohol, 1:10 ratio of oil to aqueous and sonicated at 2 and 5 min time for primary and secondary emulsion, respectively. Optimized responses for encapsulation efficiency, particle size and polydispersity index were found to be 39.12 ± 0.01%, 2.06 ± 0.017 µm and 0.95 ± 0.009, respectively, which matched values predicted by mathematical models. About 44.4% of the encapsulated alpha-mangostin was released over 4 weeks. Thermal analysis of the microspheres showed physical conversion of alpha-mangostin from crystallinity to amorphous with encapsulated one had lower in vitro cytotoxicity than free alpha-mangostin. Aerodynamic diameter (784.3 ± 7.5 nm) of this alpha-mangostin microsphere suggests suitability for peripheral pulmonary delivery.

Biocompatible Supramolecular Mesoporous Silica Nanoparticles as the Next-Generation Drug Delivery System.

Supramolecular mesoporous silica nanoparticles (MSNs) offer distinct properties as opposed to micron-sized silica particles in terms of their crystal structure, morphology-porosity, toxicity, biological effects, and others. MSN biocompatibility has touched the pharmaceutical realm to exploit its robust synthesis pathway for delivery of various therapeutic molecules including macromolecules and small-molecule drugs. This article provides a brief review of MSN history followed by special emphasis on the influencing factors affecting morphology-porosity characteristics. Its applications as the next-generation drug delivery system (NGDDS) particularly in a controlled release dosage form via an oral drug delivery system are also presented and shall be highlighted as oral delivery is the most convenient route of drug administration with the economical cost of development through to scale-up for clinical trials and market launch.

Exploring the Effect of Glycerol and Hydrochloric Acid on Mesoporous Silica Synthesis: Application in Insulin Loading.

Mesoporous silica (MPS), a carrier for active pharmaceutical ingredients, has a wide range of particle and pore morphology. A thorough understanding of ingredients used in MPS synthesis is an important prerequisite for optimizing its physicochemical characteristics. The present study aimed to evaluate the effect of glycerol and hydrochloric acid on the characteristics of synthesized MPS. Ordered MPS materials were synthesized using the pluronic P123 template and tetraethyl orthosilicate (TEOS) precursor. A three-level factorial design was employed to study the interaction between glycerol and hydrochloric acid. The optimized MPS particles were reasonably uniform in shape (short and rod-shaped) and < 1 µm in size with a smooth surface morphology. The nitrogen adsorption-desorption analysis revealed that the uniform cylindrical pores of the prepared MPS had a diameter > 5 nm and a total surface area > 500 m2/g. With increasing acid and glycerol concentrations, the particle size of MPS decreased. However, while the glycerol increased the heterogeneity of the synthesized particles, the acid decreased it. The developed MPS was successfully loaded with a biological drug (insulin) with a 21.94% encapsulation efficiency. The MPS prepared in this study exhibits potential applications as a drug delivery carrier for drugs with a large molecular weight.

Crossing the Blood-Brain Barrier: A Review on Drug Delivery Strategies for Treatment of the Central Nervous System Diseases.

Many drugs have been designed to treat diseases of the central nervous system (CNS), especially neurodegenerative diseases. However, the presence of tight junctions at the blood-brain barrier has often compromised the efficiency of drug delivery to target sites in the brain. The principles of drug delivery systems across the blood-brain barrier are dependent on substrate-specific (i.e. protein transport and transcytosis) and non-specific (i.e. transcellular and paracellular) transport pathways, which are crucial factors in attempts to design efficient drug delivery strategies. This review describes how the blood-brain barrier presents the main challenge in delivering drugs to treat brain diseases and discusses the advantages and disadvantages of ongoing neurotherapeutic delivery strategies in overcoming this limitation. In addition, we discuss the application of colloidal carrier systems, particularly nanoparticles, as potential tools for therapy for the CNS diseases.

Engineering biodegradable polyester particles with specific drug targeting and drug release properties.

Poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA) microspheres and nanoparticles remain the focus of intensive research effort directed to the controlled release and in vivo localization of drugs. In recent years engineering approaches have been devised to create novel micro- and nano-particles which provide greater control over the drug release profile and present opportunities for drug targeting at the tissue and cellular levels. This has been possible with better understanding and manipulation of the fabrication and degradation processes, particularly emulsion-solvent extraction, and conjugation of polyesters with ligands or other polymers before or after particle formation. As a result, particle surface and internal porosity have been designed to meet criteria-facilitating passive targeting (e.g., for pulmonary delivery), modification of the drug release profile (e.g., attenuation of the burst release) and active targeting via ligand binding to specific cell receptors. It is now possible to envisage adventurous applications for polyester microparticles beyond their inherent role as biodegradable, controlled drug delivery vehicles. These may include drug delivery vehicles for the treatment of cerebral disease and tumor targeting, and co-delivery of drugs in a pulsatile and/or time-delayed fashion.

PLGA microcapsules with novel dimpled surfaces for pulmonary delivery of DNA.

We describe the fabrication of DNA-loaded poly(lactic-co-glycolic acid) (PLGA) microcapsules with novel surface morphologies that will be of use in pulmonary delivery. Our approach was to examine surface morphology and DNA encapsulation efficiency as a function of primary emulsion stability; using two surfactant series based on hydrophile-lipophile balance and hydrophobe molecular weight. Hydrophilic non-ionic surfactants yielded the most stable water-in-dichloromethane emulsions (HLB values >8). These surfactants normally favor convex (o/w) interfacial curvatures and therefore this atypical behavior suggested a relatively high surfactant solvation in the dichloromethane 'oil' phase. This was consistent with the large fall in the glass transition temperature for microspheres prepared with Tween 20, which therefore efficiently penetrated the PLGA matrix and acted as a plasiticizer. Blends of Pluronic triblock copolymers performed poorly as water-in-dichloromethane emulsifiers, and were therefore used to generate hollow microspheres ('microcapsules') with low densities (0.24 g/cm(3)). Although the Pluronic-stabilized emulsions resulted in lower DNA loading (15-28%), microspheres (approximately 8 microm) with novel dimpled surfaces were fabricated. The depth and definition of the dimples was greatest for triblock copolymers with high MW hydrophobe blocks. By cascade impaction, the geometric mean weight diameter of the microcapsules was 3.43 microm, suggesting that they will be of interest as biodegradable pulmonary delivery vehicles.

Fabrication of Fucoxanthin-Loaded Microsphere(F-LM) By Two Steps Double-Emulsion Solvent Evaporation Method and Characterization of Fucoxanthin before and after Microencapsulation.

Microencapsulation is a promising approach in drug delivery to protect the drug from degradation and allow controlled release of the drug in the body. Fucoxanthin-loaded microsphere (F-LM) was fabricated by two step w/o/w double emulsion solvent evaporation method with poly (L-lactic-coglycolic acid) (PLGA) as carrier. The effect of four types of surfactants (PVA, Tween-20, Span-20 and SDS), homogenization speed, and concentration of PLGA polymer and surfactant (PVA), respectively, on particle size and morphology of F-LM were investigated. Among the surfactants tested, PVA showed the best results with smallest particle size (9.18 µm) and a smooth spherical surface. Increasing the homogenization speed resulted in a smaller mean F-LM particle size [d(0.50)] from 17.12 to 9.18 µm. Best particle size results and good morphology were attained at homogenization speed of 20 500 rpm. Meanwhile, increased PLGA concentration from 1.5 to 11.0 (% w/v) resulted in increased F-LM particle size. The mean particle size [d(0.5)] of F-LM increased from 3.93 to 11.88 µm. At 6.0 (% w/v) PLGA, F-LM showed the best structure and external morphology. Finally, increasing PVA concentration from 0.5 to 3.5 (% w/v) resulted in decreased particle size from 9.18 to 4.86 µm. Fucoxanthin characterization before and after microencapsulation was carried out to assess the success of the microencapsulation procedure. Thermo gravimetry analysis (TGA), glass transition (Tg) temperature of F-LM and fucoxanthin measured using DSC, ATR-FTIR and XRD indicated that fucoxanthin was successfully encapsulated into the PLGA matrix, while maintaining the structural and chemical integrity of fucoxanthin.

Preparation, characterization and in vitro release study of BSA-loaded double-walled glucose-poly(lactide-co-glycolide) microspheres.

The aim of this study was to prepare a model protein, bovine serum albumin (BSA) loaded double-walled microspheres using a fast degrading glucose core, hydroxyl-terminated poly(lactide-co-glycolide) (Glu-PLGA) and a moderate-degrading carboxyl-terminated PLGA polymers to reduce the initial burst release and to eliminate the lag phase from the release profile of PLGA microspheres. The double-walled microspheres were prepared using a modified water-in-oil-in-oil-in-water (w/o/o/w) method and single-polymer microspheres were prepared using a conventional water-in-oil-in-water (w/o/w) emulsion solvent evaporation method. The particle size, morphology, encapsulation efficiency, thermal properties, in vitro drug release and structural integrity of BSA were evaluated in this study. Double-walled microspheres prepared with Glu-PLGA and PLGA polymers with a mass ratio of 1:1 were non-porous, smooth-surfaced, and spherical in shape. A significant reduction of initial burst release was achieved for the double-walled microspheres compared to single-polymer microspheres. In addition, microspheres prepared using Glu-PLGA and PLGA polymers in a mass ratio of 1:1 exhibited continuous BSA release after the small initial burst without any lag phase. It can be concluded that the double-walled microspheres made of Glu-PLGA and PLGA polymers in a mass ratio of 1:1 can be a potential delivery system for pharmaceutical proteins.

The influence of protein solubilisation, conformation and size on the burst release from poly(lactide-co-glycolide) microspheres.

Encapsulation of proteins in poly(lactide-co-glycolide) microspheres via emulsion is known to cause insoluble protein aggregates. Following protein emulsification and encapsulation in PLGA microspheres, we used circular dichroism to show that the recoverable soluble protein fraction also suffers subtle conformational changes. For a panel of proteins selected on the basis of molecular size and structural class, conformational stability measured by chemical denaturation was not indicative of stability during emulsion-encapsulation. Partial loss of structure was observed for alpha-helical proteins released from freeze-dried microspheres in aqueous buffer, with dramatic loss of structure for a beta-sandwich protein. The addition of sucrose (a lyoprotectant) did not prevent the loss of protein conformation upon encapsulation. Therefore, the conformational changes seen for the released soluble protein fraction originates during emulsification rather than microsphere freeze-drying. Analysis of the burst release for all proteins in buffer containing denaturant or surfactant showed that the degree of protein solubilisation was the dominant factor in determining the initial rate and extent of release. Our data for protein release into increasing concentrations of denaturing buffer suggest that the emulsion-denatured protein fraction remains insoluble; this fraction may represent the protein loss encountered upon comparison of protein encapsulated versus protein released.