Monitoring the Hydrothermal Growth of Cobalt Spinel Water Oxidation Catalysts: From Preparative History to Catalytic Activity.

The hydrothermal growth of cobalt oxide spinel (Co3 O4 ) nanocrystals from cobalt acetate precursors was monitored with in situ powder X-ray diffraction (PXRD) in combination with ex situ electron microscopy and vibrational spectroscopy. Kinetic data from in situ PXRD monitoring were analyzed using Sharp-Hancock and Gualtieri approaches, which both clearly indicate a change of the growth mechanism for reaction temperatures above 185 °C. This mechanistic transition goes hand in hand with morphology changes that notably influence the photocatalytic oxygen evolution activity. Complementary quenching investigations of conventional hydrothermal Co3 O4 growth demonstrate that these insights derived from in situ PXRD data provide valuable synthetic guidelines for water oxidation catalyst production. Furthermore, the ex situ analyses of hydrothermal quenching experiments were essential to assess the influence of amorphous cobalt-containing phases arising from the acetate precursor on the catalytic activity. Thereby, the efficient combination of a single in situ technique with ex situ analyses paves the way to optimize parameter-sensitive hydrothermal production processes of key energy materials.

{Co4O4} and {CoxNi4-xO4} Cubane Water Oxidation Catalysts as Surface Cut-Outs of Cobalt Oxides.

The future of artificial photosynthesis depends on economic and robust water oxidation catalysts (WOCs). Cobalt-based WOCs are especially promising for knowledge transfer between homogeneous and heterogeneous catalyst design. We introduce the active and stable {CoII4O4} cubane [CoII4(dpy{OH}O)4(OAc)2(H2O)2](ClO4)2 (Co4O4-dpk) as the first molecular WOC with the characteristic {H2O-Co2(OR)2-OH2} edge-site motif representing the sine qua non moiety of the most efficient heterogeneous Co-oxide WOCs. DFT-MD modelings as well as in situ EXAFS measurements indicate the stability of the cubane cage in solution. The stability of Co4O4-dpk under photocatalytic conditions ([Ru(bpy)3]2+/S2O82-) was underscored with a wide range of further analytical methods and recycling tests. FT-IR monitoring and HR-ESI-MS spectra point to a stable coordination of the acetate ligands, and DFT-MD simulations along with 1H/2H exchange experiments highlight a favorable intramolecular base functionality of the dpy{OH}O ligands. All three ligand types enhance proton mobility at the edge site through a unique bioinspired environment with multiple hydrogen-bonding interactions. In situ XANES experiments under photocatalytic conditions show that the {CoII4O4} core undergoes oxidation to Co(III) or higher valent states, which recover rather slowly to Co(II). Complementary ex situ chemical oxidation experiments with [Ru(bpy)3]3+ furthermore indicate that the oxidation of all Co(II) centers of Co4O4-dpk to Co(III) is not a mandatory prerequisite for oxygen evolution. Moreover, we present the [CoIIxNi4-x(dpy{OH}O)4(OAc)2(H2O)2](ClO4)2 (CoxNi4-xO4-dpk) series as the first mixed Co/Ni-cubane WOCs. They newly bridge homogeneous and heterogeneous catalyst design through fine-tuned edge-site environments of the Co centers.

Promoting Photochemical Water Oxidation with Metallic Band Structures.

The development of economic water oxidation catalysts is a key step toward large-scale water splitting. However, their current exploration remains empirical to a large extent. Elucidating the correlations between electronic properties and catalytic activity is crucial for deriving general and straightforward catalyst design principles. Herein, strongly correlated electronic systems with abundant and easily tunable electronic properties, namely La(1-x)Sr(x)BO3 perovskites and La(2-x)Sr(x)BO4 layered perovskites (B = Fe, Co, Ni, or Mn), were employed as model systems to identify favorable electronic structures for water oxidation. We established a direct correlation between the enhancement of catalytic activity and the insulator to metal transition through tuning the electronic properties of the target perovskite families via the La(3+)/Sr(2+) ratio. Their improved photochemical water oxidation performance was clearly linked to the increasingly metallic character. These electronic structure-activity relations provide a promising guideline for constructing efficient water oxidation catalysts.

3d-4f {Co(II)3Ln(OR)4} Cubanes as Bio-Inspired Water Oxidation Catalysts.

Although the {CaMn4O5} oxygen evolving complex (OEC) of photosystem II is a major paradigm for water oxidation catalyst (WOC) development, the comprehensive translation of its key features into active molecular WOCs remains challenging. The [Co(II)3Ln(hmp)4(OAc)5H2O] ({Co(II)3Ln(OR)4}; Ln = Ho-Yb, hmp = 2-(hydroxymethyl)pyridine) cubane WOC series is introduced as a new springboard to address crucial design parameters, ranging from nuclearity and redox-inactive promoters to operational stability and ligand exchange properties. The {Co(II)3Ln(OR)4} cubanes promote bioinspired WOC design by newly combining Ln(3+) centers as redox-inactive Ca(2+) analogues with flexible aqua-/acetate ligands into active and stable WOCs (max. TON/TOF values of 211/9 s(-1)). Furthermore, they open up the important family of 3d-4f complexes for photocatalytic applications. The stability of the {Co(II)3Ln(OR)4} WOCs under photocatalytic conditions is demonstrated with a comprehensive analytical strategy including trace metal analyses and solution-based X-ray absorption spectroscopy (XAS) investigations. The productive influence of the Ln(3+) centers is linked to favorable ligand mobility, and the experimental trends are substantiated with Born-Oppenheimer molecular dynamics studies.

Closer to photosystem II: a Co4O4 cubane catalyst with flexible ligand architecture.

We introduce the novel Co4O4 complex [Co(II)4(hmp)4(µ-OAc)2(µ2-OAc)2(H2O)2] (1) (hmp = 2-(hydroxymethyl)pyridine) as the first Co(II)-based cubane water oxidation catalyst. Monodentate acetate and aqua ligands lend the flexible environment of 1 closest resemblance to photosystem II among its tetranuclear mimics to date. Visible-light-driven catalytic activity of 1 increases with pH value through aqua ligand deprotonation. The Co(II) core combines robustness and stability with flexibility through a new type of water-oxidation mechanism via mobile ligands.

Hydrogen bond dynamics in crystalline ß-9-anthracene carboxylic acid--a combined crystallographic and spectroscopic study.

We compare results from single crystal X-ray diffraction and FTIR spectroscopy to elucidate the nature of hydrogen bonding in ß-9-anthracene carboxylic acid (ß-9AC, C(15)H(10)O(2)). The crystallographic studies indicate a disorder for the protons in the cyclic hydrogen bond. This disorder allows the determination of the energy difference between two proton sites along the hydrogen bond. The temperature dependent Fourier transform infrared spectroscopy (FTIR) underpins the crystallographic results. The combination of both methods allows the estimation of a one-dimensional potential curve describing the OH-stretching motion. The dynamical properties of the proton transfer along the hydrogen bond are extracted from this potential. The work presented here has profound implication on future studies of photochemical dynamics of crystalline ß-9AC, which can deliver a deeper understanding of the mechanism of photochemical driven molecular machines and the optical and electronic properties of molecular organic semiconductors.

Monitoring surface transformations of metal carbodiimide water oxidation catalysts by operando XAS and Raman spectroscopy.

Transition metal carbodiimides MNCN (M = Co, Ni, Co0.9Ni0.1, Mn and Cu), were studied by simultaneous operando Raman and X-ray absorption spectroscopy (XAS) with focus on surface oxide detection during electrocatalytic water oxidation. As a proof of concept, easily modifiable screen-printed electrodes were used in this unified operando synchrotron setup for a trade-off between convenience of electrochemical anodization and spectroscopic data acquisition. Monitoring of chemical and structural transformations at the electrode surface during initial anodic electrode polarization shows stability for MNCN with M = Co, Ni, Co0.9Ni0.1 and Mn. While MnNCN is inactive, CoNCN emerges as the most active representative of the series. CuNCN displays pronounced side reactions and the formation of a surface copper oxide layer leading to lower current density attributed to water oxidation, as evident from an irreversible variation of the CuNCN redox behaviour in rotating ring-disc voltammetry. Furthermore, the accompanying structural and vibrational spectroscopy properties of the different MNCN compounds were explored with complementary ex situ analytical methods.

Bi2O2CO3 Growth at Room Temperature: In Situ X-ray Diffraction Monitoring and Thermal Behavior.

The room-temperature formation of bismuth oxycarbonate (Bi2O2CO3) from Bi2O3 in sodium carbonate buffer was investigated with in situ powder X-ray diffraction (PXRD) in combination with electron microscopy and vibrational spectroscopy. Time-resolved PXRD measurements indicate a pronounced and rather complex pH dependence of the reaction mechanism. Bi2O2CO3 formation proceeds within a narrow window between pH 8 and 10 via different mechanisms. Although a zero-dimensional nucleation model prevails around pH 8, higher pH values induce a change toward a diffusion-controlled model, followed by a transition to regular nucleation kinetics. Ex situ synthetic and spectroscopic studies confirm these trends and demonstrate that in situ monitoring affords vital parameter information for the controlled fabrication of Bi2O2CO3 materials. Furthermore, the ß â†’ α bismuth oxide transformation temperatures of Bi2O2CO3 precursors obtained from different synthetic routes differ notably (by min 50 °C) from commercially available bismuth oxide. Parameter studies suggest a stabilizing role of surface carbonate ions in the as-synthesized bismuth oxide sources. Our results reveal the crucial role of multiple preparative history parameters, especially of pH value and source materials, for the controlled access to bismuth oxide-based catalysts and related functional compounds.

Nickel-Containing Keggin-Type Polyoxometalates as Hydrogen Evolution Catalysts: Photochemical Structure-Activity Relationships.

In search of structure-activity relationships for polyoxometalate (POM)-based water reduction catalysts, nickel-monosubstituted Keggin-type POMs ([Ni(H2 O)XW11 O39 ]n- ; XP, Si, Ge) were compared with respect to their activity in photochemical hydrogen evolution. The title compound series was characterized by single-crystal X-ray diffraction methods and a wide range of spectroscopic and electrochemical techniques. Nickel substitution was identified as a crucial feature for catalytic activity through comparison with nickel-free reference POMs. Furthermore, turnover number (TON) and turnover frequency strongly depended on the heteroatom X, and the highest TON among the series was recorded for [Ni(H2 O)GeW11 O39 ]6- . Photochemical hydrogen evolution activity was compared with redox and onset potentials obtained from electrochemical analyses. Furthermore, activity trends were correlated with electronic structure properties derived from density functional theory calculations.

Evidence for point transformations in photoactive molecular crystals by the photoinduced creation of diffuse diffraction patterns.

Time-resolved diffuse X-ray scattering is one powerful method for monitoring the progression from the creation of local structural changes inside a crystalline material up to the transformation of the whole crystalline bulk. In this work, we study the mechanism of phototransformation of a molecular crystal by time-resolved diffuse X-ray scattering. Here, an optical excitation source, like a pulsed laser, initiates structural transformations which are monitored by X-ray scattering techniques. We have studied the dimerization process of the molecular switch α-styrylpyrylium (trifluoromethanesulfonate) TFMS, in particular for understanding whether cooperative effects influence the changes of the structure in the bulk and its periodicity. Upon illumination with optical light, α-styrylpyrylium TFMS instantaneously photoswitches. Depending on the optical fluence, X-ray diffuse planes are observed prior to phototransformation of the bulk. In the early stages of transformation, the analysis reveals systems of randomly distributed islands of product clusters with gradual growth in size and amount. The degree of transformation follows the optical excitation profile, i.e., the spatial absorption of the laser beam. In the present studies, no influence of cooperativity on the photodimerization process has been found.