Exploring Maillard reaction markers and melanoidins to investigate toxicological and antioxidant profiles of optimized expanded snacks from corn/common bean mixtures.

BACKGROUND: Extrusion cooking of cereal-legume flour mixture is an innovative strategy to introduce nutrient-enriched ready-to-eat snacks to the market. However, this thermal process triggers the formation of compounds that could impact safety aspects of these products. Maillard reaction markers and the end products known as melanoidins were evaluated to assess the toxicological and bioactive profiles of extruded snacks from corn-plus-common-bean-flour combinations. Different molecular weight fractions were isolated and purified to analyze their antioxidant activity and to investigate the role of melanoidins. RESULTS: The snack formulated with an 84:16 ratio of corn:common bean flours exhibited an enhanced toxicological profile. It displayed the lowest levels of acrylamide and furanic compounds, along with reduced blockage of lysine residues in the protein. Extrusion increased the antioxidant activity of uncooked flours (30 to 64%) and total phenolic compounds (26 to 50%), and decreased the available lysine (-72.7 to -79.5%). During the fractionation process, it was established that compounds within the range of 3-10 kDa made the greatest contribution to antioxidant activity. The fraction greater than 10 kDa, which included melanoidins, displayed 7 to 33% lower antioxidant activity. The purification of the fraction greater than 10 kDa revealed that pure melanoidins represented approximately one-third of the antioxidant activity in that fraction. Non-covalent adducts linked to the melanoidin core therefore had a relevant role in the antioxidant action of formulated snacks. CONCLUSION: This investigation illustrates the importance of considering both potential risks and associated benefits of compounds formed during the Maillard reaction while developing new extruded snacks. © 2024 The Author(s). Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Distinct platelet F-actin patterns and traction forces on von Willebrand factor versus fibrinogen.

Upon vascular injury, platelets form a hemostatic plug by binding to the subendothelium and to each other. Platelet-to-matrix binding is initially mediated by von Willebrand factor (VWF) and platelet-to-platelet binding is mediated mainly by fibrinogen and VWF. After binding, the actin cytoskeleton of a platelet drives its contraction, generating traction forces that are important to the cessation of bleeding. Our understanding of the relationship between adhesive environment, F-actin morphology, and traction forces is limited. Here, we examined F-actin morphology of platelets attached to surfaces coated with fibrinogen and VWF. We identified distinct F-actin patterns induced by these protein coatings and found that these patterns were identifiable into three classifications via machine learning: solid, nodular, and hollow. We observed that traction forces for platelets were significantly higher on VWF than on fibrinogen coatings and these forces varied by F-actin pattern. In addition, we analyzed the F-actin orientation in platelets and noted that their filaments were more circumferential when on fibrinogen coatings and having a hollow F-actin pattern, while they were more radial on VWF and having a solid F-actin pattern. Finally, we noted that subcellular localization of traction forces corresponded to protein coating and F-actin pattern: VWF-bound, solid platelets had higher forces at their central region while fibrinogen-bound, hollow platelets had higher forces at their periphery. These distinct F-actin patterns on fibrinogen and VWF and their differences in F-actin orientation, force magnitude, and force localization could have implications in hemostasis, thrombus architecture, and venous versus arterial thrombosis.

Poststroke Lung Infection by Opportunistic Commensal Bacteria Is Not Mediated by Their Expansion in the Gut Microbiota.

BACKGROUND: Respiratory and urinary tract infections are frequent complications in patients with severe stroke. Stroke-associated infection is mainly due to opportunistic commensal bacteria of the microbiota that may translocate from the gut. We investigated the mechanisms underlying gut dysbiosis and poststroke infection. METHODS: Using a model of transient cerebral ischemia in mice, we explored the relationship between immunometabolic dysregulation, gut barrier dysfunction, gut microbial alterations, and bacterial colonization of organs, and we explored the effect of several drug treatments. RESULTS: Stroke-induced lymphocytopenia and widespread colonization of lung and other organs by opportunistic commensal bacteria. This effect correlated with reduced gut epithelial barrier resistance, and a proinflammatory sway in the gut illustrated by complement and nuclear factor-κB activation, reduced number of gut regulatory T cells, and a shift of gut lymphocytes to γδT cells and T helper 1/T helper 17 phenotypes. Stroke increased conjugated bile acids in the liver but decreased bile acids and short-chain fatty acids in the gut. Gut fermenting anaerobic bacteria decreased while opportunistic facultative anaerobes, notably Enterobacteriaceae, suffered an expansion. Anti-inflammatory treatment with a nuclear factor-κB inhibitor fully abrogated the Enterobacteriaceae overgrowth in the gut microbiota induced by stroke, whereas inhibitors of the neural or humoral arms of the stress response were ineffective at the doses used in this study. Conversely, the anti-inflammatory treatment did not prevent poststroke lung colonization by Enterobacteriaceae. CONCLUSIONS: Stroke perturbs homeostatic neuro-immuno-metabolic networks facilitating a bloom of opportunistic commensals in the gut microbiota. However, this bacterial expansion in the gut does not mediate poststroke infection.

Removal of heavy metals from mine tailings by in-situ bioleaching coupled to electrokinetics.

This work utilizes a combined biological-electrochemical technique for the in-situ removal of metals from polluted mine tailings. As the main novelty point it is proposed to use electrokinetics (EK) for the in-situ activation of a bioleaching mechanism into the tailings, in order to promote biological dissolution of metal sulphides (Step 1), and for the subsequent removal of leached metals by EK transport out of the tailings (Step 2). Mine tailings were collected from an abandoned Pb/Zn mine located in central-southern Spain. EK-bioleaching experiments were performed under batch mode using a lab scale EK cell. A mixed microbial culture of autochthonous acidophilic bacteria grown from the tailings was used. Direct current with polarity reversal vs alternate current was evaluated in Step 1. In turn, different biological strategies were used: biostimulation, bioaugmentation and the abiotic reference test (EK alone). It was observed that bioleaching activation was very low during Step 1, because it was difficult to maintain acidic pH in the whole soil, but then it worked correctly during Step 2. It was confirmed that microorganisms successfully contributed to the in-situ solubilization of the metal sulphides as final metal removal rates were improved compared to the conventional abiotic EK (best increases of around 40% for Cu, 162% for Pb, 18% for Zn, 13% for Mn, 40% for Ni and 15% for Cr). Alternate current seemed to be the best option. The tailings concentrations of Fe, Al, Cu, Mn, Ni and Pb after treatment comply with regulations, but Pb, Cd and Zn concentrations exceed the maximum values. From the data obtained in this work it has been observed that EK-bioleaching could be feasible, but some upgrades and future work must be done in order to optimize experimental conditions, especially the control of soil pH in acidic values.

Salmonella Type III Secretion Effector SrfJ: A Glucosylceramidase Affecting the Lipidome and the Transcriptome of Mammalian Host Cells.

Type III secretion systems are found in many Gram-negative pathogens and symbionts of animals and plants. Salmonella enterica has two type III secretion systems associated with virulence, one involved in the invasion of host cells and another involved in maintaining an appropriate intracellular niche. SrfJ is an effector of the second type III secretion system. In this study, we explored the biochemical function of SrfJ and the consequences for mammalian host cells of the expression of this S. enterica effector. Our experiments suggest that SrfJ is a glucosylceramidase that alters the lipidome and the transcriptome of host cells, both when expressed alone in epithelial cells and when translocated into macrophages in the context of Salmonella infection. We were able to identify seventeen lipids with higher levels and six lipids with lower levels in the presence of SrfJ. Analysis of the forty-five genes, the expression of which is significantly altered by SrfJ with a fold-change threshold of two, suggests that this effector may be involved in protecting Salmonella from host immune defenses.

Modelling the cathodic reduction of 2,4-dichlorophenol in a microbial fuel cell.

This work presents a simplified mathematical model able to predict the performance of a microbial fuel cell (MFC) for the cathodic dechlorination of 2,4-dichlorophenol (2,4-DCP) operating at different cathode pH values (7.0 and 5.0). Experimental data from previous work were utilized for the fitting of the model. The MFC modelled consisted of two chambers (bioanode and abiotic cathode), wherein the catholyte contained 300 mg L-1 of 2,4-DCP and the anolyte 1000 mg L-1 of sodium acetate. The model considered two mixed microbial populations in the anode compartment using sodium acetate as the carbon source for growth and maintenance: electrogenic and non-electrogenic biomass. 2,4-DCP, its intermediates of the reductive process (2-chlorophenol, 2-CP and 4-chlorophenol, 4-CP) and protons were considered in the model as electron acceptors in the electrogenic mechanism. The global process rate was assumed to be controlled by the biological mechanisms and modelled using multiplicative Monod-type equations. The formulation of a set of differential equations allowed to describe the simultaneous evolution of every component: concentration of sodium acetate in the anodic compartment; and concentration of 2,4-DCP, 2-CP, 4-CP, phenol and chloride in the cathode chamber. Current production and coulombic efficiencies were also estimated from the fitting. It was observed that most of the organic substrate was used by non-electrogenic mechanism. The influence of the Monod parameters was more important than the influence of the biomass yield coefficients. Finally, the model was employed to simulate different scenarios under distinct experimental conditions.

The NEL Family of Bacterial E3 Ubiquitin Ligases.

Some pathogenic or symbiotic Gram-negative bacteria can manipulate the ubiquitination system of the eukaryotic host cell using a variety of strategies. Members of the genera Salmonella, Shigella, Sinorhizobium, and Ralstonia, among others, express E3 ubiquitin ligases that belong to the NEL family. These bacteria use type III secretion systems to translocate these proteins into host cells, where they will find their targets. In this review, we first introduce type III secretion systems and the ubiquitination process and consider the various ways bacteria use to alter the ubiquitin ligation machinery. We then focus on the members of the NEL family, their expression, translocation, and subcellular localization in the host cell, and we review what is known about the structure of these proteins, their function in virulence or symbiosis, and their specific targets.

A classical modelling of abandoned mine tailings' bioleaching by an autochthonous microbial culture.

The aim of this study was to study and model the bioleaching of abandoned mine tailings at different pulp densities 1-20% w/v by using an autochthonous mesophilic microbial culture. Because of the importance of the ferrous-iron oxidation as sub-process on the bioleaching of sulphide mineral ores, the ferrous-iron oxidation process by the autochthonous microbial culture was studied at different ferrous-iron concentrations. A mathematical model fitted to the experimental results and the main kinetic and stoichiometric parameters were determined, being the most relevant the maximum ferrous-iron oxidation rate 5.1 (mmol Fe2+/mmol C·h) and the biomass yield, 0.01 mmol C/mmol Fe2+, values very similar to that of mixed cultured dominated by Leptospirillum strains. This autochthonous culture was used in the bioleaching experiment carried out at different pulp densities, obtaining a maximum metal recovery in the tests carried out at 1% w/v, recovering a 90% of Cd, 60% of Zn, 30% of Cu, 25% Fe and 6% of Pb. Finally, the different leaching mechanisms were modelled by using the pyrite as ore model obtaining a bioleaching rate of 0.316 mmol Fe2+/(L·h) for the direct mechanisms and a bioleaching rate for the indirect and cooperative leaching mechanisms of 0.055 Fe2+/(L·h).

A Novel Route for the Easy Production of Thermochromic VO2 Nanoparticles.

In this work, a simple, fast and dry method for the fabrication of a thermochromic product with a high load of VO2 (M1) consisting of the controlled heat treatment of pure vanadium nanoparticles in air is presented. After a complete design of experiments, it is concluded that the most direct way to attain the maximum transformation of V into VO2 (M1) consists of one cycle with a fast heating ramp of 42 °C s-1 , followed by keeping 700 °C for 530-600 seconds, and a subsequent cooling at 0.05 °C s-1 . Careful examination of these results lead to a second optimum, even more suitable for industrial production (quicker and less energy-intensive because of its lower temperatures and shorter times), consisting of subjecting V to two consecutive cycles of temperatures and times (625 °C for 5 minutes) with similar preheating (42 °C s-1 ) but a much faster postcooling (∼ 8 °C s-1 ). These green reactions only use the power for heating a tube open to atmosphere and a vanadium precursor; without assistance of reactive gases or catalysts, and no special vacuum or pressure requirements. The best products present similar thermochromic properties but higher thermal stability than commercial VO2 particles. These methods can be combined with VO2 doping.

Compositional and structural analysis of engineered stones and inorganic particles in silicotic nodules of exposed workers.

BACKGROUND: Engineered stone silicosis is an emerging disease in many countries worldwide produced by the inhalation of respirable dust of engineered stone. This silicosis has a high incidence among young workers, with a short latency period and greater aggressiveness than silicosis caused by natural materials. Although the silica content is very high and this is the key factor, it has been postulated that other constituents in engineered stones can influence the aggressiveness of the disease. Different samples of engineered stone countertops (fabricated by workers during the years prior to their diagnoses), as well as seven lung samples from exposed patients, were analyzed by multiple techniques. RESULTS: The different countertops were composed of SiO2 in percentages between 87.9 and 99.6%, with variable relationships of quartz and cristobalite depending on the sample. The most abundant metals were Al, Na, Fe, Ca and Ti. The most frequent volatile organic compounds were styrene, toluene and m-xylene, and among the polycyclic aromatic hydrocarbons, phenanthrene and naphthalene were detected in all samples. Patients were all males, between 26 and 46 years-old (average age: 36) at the moment of the diagnosis. They were exposed to the engineered stone an average time of 14 years. At diagnosis, only one patient had progressive massive fibrosis. After a follow-up period of 8 ± 3 years, four patients presented progressive massive fibrosis. Samples obtained from lung biopsies most frequently showed well or ill-defined nodules, composed of histiocytic cells and fibroblasts without central hyalinization. All tissue samples showed high proportion of Si and Al at the center of the nodules, becoming sparser at the periphery. Al to Si content ratios turned out to be higher than 1 in two of the studied cases. Correlation between Si and Al was very high (r = 0.93). CONCLUSION: Some of the volatile organic compounds, polycyclic aromatic hydrocarbons and metals detected in the studied countertop samples have been described as causative of lung inflammation and respiratory disease. Among inorganic constituents, aluminum has been a relevant component within the silicotic nodule, reaching atomic concentrations even higher than silicon in some cases. Such concentrations, both for silicon and aluminum showed a decreasing tendency from the center of the nodule towards its frontier.

An Old Technique with A Promising Future: Recent Advances in the Use of Electrodeposition for Metal Recovery.

Although the first published works on electrodeposition dates from more than one century ago (1905), the uses of this technique in the recovery of metals are attracting an increasing interest from the scientific community in the recent years. Moreover, the intense use of metals in electronics and the necessity to assure a second life of these devices in a context of circular economy, have increased the interest of the scientific community on electrodeposition, with almost 3000 works published per year nowadays. In this review, we aim to revise the most relevant and recent publications in the application of electrodeposition for metal recovery. These contributions have been classified into four main groups of approaches: (1) treatment and reuse of wastewater; (2) use of ionic liquids; (3) use of bio-electrochemical processes (microbial fuel cells and microbial electrolysis cells) and (4) integration of electrodeposition with other processes (bioleaching, adsorption, membrane processes, etc.). This would increase the awareness about the importance of the technology and would serve as a starting point for anyone that aims to start working in the field.

Tubulin Folding Cofactor TBCB is a Target of the Salmonella Effector Protein SseK1.

Salmonella enterica serovar Typhimurium is a human and animal pathogen that uses type III secretion system effectors to manipulate the host cell and fulfill infection. SseK1 is a Salmonella effector with glycosyltransferase activity. We carried out a yeast two-hybrid screen and have identified tubulin-binding cofactor B (TBCB) as a new binding partner for this effector. SseK1 catalyzed the addition of N-acetylglucosamine to arginine on TBCB, and its expression promoted the stabilization of the microtubule cytoskeleton of HEK293T cells. The conserved Asp-x-Asp (DxD) motif that is essential for the activity of SseK1 was required for the binding and modification of TBCB and for the effect on the cytoskeleton. Our study has identified a novel target for SseK1 and suggests that this effector may have a role in the manipulation of the host cell microtubule network to provide a safe niche for this pathogen.

Biodegradability improvement and toxicity reduction of soil washing effluents polluted with atrazine by means of electrochemical pre-treatment: Influence of the anode material.

This work focuses on the partial anodic electro-oxidation of atrazine-polluted soil washing effluents (SWE) in order to reduce its toxicity and to improve its biodegradability. Concretely it has been evaluated the influence of the anodic material used. It is hypothesized that such partial oxidation step could be considered as a pre-treatment for a subsequent biological treatment. At first, atrazine was extracted from a polluted soil by means of a surfactant-aided soil-washing process. Then, four different anodic materials were studied in partial electro-oxidation pre-treatment batch experiments at different electric charges applied: Boron Doped Diamond (BDD), Carbon Felt (CF), and Mixed Metal Oxides Anodes with Iridium and Ruthenium. Atrazine, TOC, surfactant and sulphate species concentrations, as well as changes in toxicity and biodegradability, were monitored during electrochemical experiments, showing important differences in their evolution during the treatment. It was observed that BDD was the most powerful anodic material to completely degrade atrazine. The other materials achieve an atrazine degradation rate about 75%. Regarding mineralization of the organics in SWE, BDD overtakes clearly the rest of anodes tested. CF obtains good atrazine removal but low mineralization results. All the anodes tested slightly reduced the ecotoxicity of the water effluents. About the biodegradability, only the effluent obtained after the pre-treatment with BDD presented a high biodegradability. In this sense, it must be highlighted the mineralization obtained during the BDD pre-treatment was very strong. These results globally indicate that it is necessary to find a compromise between reaching efficient atrazine removal and biodegradability improvement, while also simultaneously avoiding strong mineralization. Additional efforts should be made to find the most adequate working conditions.

Vascular Injury During Urologic Surgery: Somebody Call My Mother.

PURPOSE OF REVIEW: To provide the critical elements to effectively manage hemorrhage from vascular injuries sustained during planned urological interventions. RECENT FINDINGS: The frequency of intraoperative vascular injuries is increasing. However, literature concerning the management of iatrogenic operative vascular injuries is scarce. Although rare, intraoperative vascular injuries may be associated with potential catastrophic complications and death. The decision-making process following a potential life-threatening intraoperative vascular injury occurs in a very short time frame. Appropriate knowledge of the critical elements to identify the source of bleeding, initiate first-line hemostatic measures, select the candidate for damage control strategies, and perform the indicated operative repairing maneuvers and techniques have been proved crucial to ensure hemodynamic stability and bleeding cessation. The key surgical principles to counteract the impact of exsanguinating bleeding, and the aim to obtain the best achievable outcomes after definitive repair, are described in detail in this review.

Alternative food matrices for snack formulations in terms of acrylamide formation and mitigation.

BACKGROUND: The salty snack market is re-inventing itself trying to offer to consumers healthier and added-value products often based on alternative vegetables/cereals, such as vegetable chips. New options mostly involve a nutritional improvement but the toxicological aspects of the reformulation are not usually examined. This work evaluated the acrylamide formation and effectiveness of different mitigation strategies in potato chips and in alternative snacks, such as carrot and pumpkin chips. Fresh potato, carrot and pumpkin samples were fried under controlled conditions and after being subjected to different operations (soaking in water at different times/temperatures, adding lemon or vinegar as pH modifiers or salt). RESULTS: Acrylamide values in control samples of carrot (224 ± 47 µg kg-1 ) and pumpkin (514 ± 83 µg kg-1 ) were significantly lower than in the potato chip samples (3887 ± 509 µg kg-1 ). The different mitigation treatments had effects on potato and pumpkin chips, the most effective strategies being soaking options and the decrease of the pH of the medium. However, such treatments were not as effective in carrot chips. CONCLUSIONS: These new vegetable snacks could be a healthy alternative both at nutritional and toxicological level. In addition, acrylamide concentration could even be reduced with simple mitigation operations before frying. © 2018 Society of Chemical Industry.

Current status, challenges and the way forward for dairy goat production in Europe.

The aim of this review is to show the evolution of the dairy goat sector in Europe from all perspectives. Starting from the current situation, the challenges and future potential of this livestock system are presented, as well as strategies to overcome the difficulties faced. Europe holds 1.9% of the world goat population and produces 15.1% of goat milk recorded worldwide. The goat species plays a fundamental economic, social and environmental role in many regions of Europe. The wide diversity of production systems and autochthonous breeds makes the sector very heterogeneous. In order to improve viability, a number of strategies need to be adopted to solve the current problems such as a low profitability, absence of generational change and a little or no recognition of the social and environmental role of the sector. Some strategies to improve the situation of the European goat sector include: i) generating market value that will recognise the diversity of the dairy goat sector (breeds, feeding models, derived products…); ii) promoting and raising awareness of the functional attributes of goat milk and derived products so as to increase consumption; iii) assigning an economic value to environmental and social functions; iv) improving working conditions through technological innovation to make goat farming more attractive to young people; and v) processing more milk into cheese or other dairy products in production areas.

Molecular Mechanisms Used by Salmonella to Evade the Immune System.

Human and animal pathogens are able to circumvent, at least temporarily, the sophisticated immune defenses of their hosts. Several serovars of the Gram-negative bacterium Salmonella enterica have been used as models for the study of pathogen-host interactions. In this review we discuss the strategies used by Salmonella to evade or manipulate three levels of host immune defenses: physical barriers, innate immunity and adaptive immunity. During its passage through the digestive system, Salmonella has to face the acidic pH of the stomach, bile and antimicrobial peptides in the intestine, as well as the competition with resident microbiota. After host cell invasion, Salmonella manipulates inflammatory pathways and the autophagy process. Finally, Salmonella evades the adaptive immune system by interacting with dendritic cells, and T and B lymphocytes. Mechanisms allowing the establishment of persistent infections are also discussed.

Model based evaluation of plant improvement at a large wastewater treatment plant (WWTP).

In this work, the effect of the improvement carried out at a large-scale wastewater treatment plant (WWTP) was evaluated, by means of modelling works, with the aim to determine the influence of the modernization over the process performance. After modernization, the energy consumption due to the aeration decreased about a 20% maintaining the effluent quality. In order to double-check the good effluent quality, modelling works were carried out at the full-scale plant. After calibration, the model was applied to the upgraded full-scale plant obtaining deviations lower than 10%. Then, the performance of the main biochemical processes was evaluated in terms of oxygen uptake rate (OUR), ammonia uptake rate (AUR), and chemical oxygen demand (COD) consumption. The rate of the main processes depending on the aeration, that is OUR and AUR, were about 22 gO2/(kg VSS·h) and 2.9 gN/(kg VSS·h), respectively.

Proteomic insight into the effects of the Salmonella ubiquitin ligase SlrP on host cells.

The virulence of the human and animal pathogen Salmonella enterica serovar Typhimurium is dependent on two type III secretion systems. These systems translocate proteins called effectors into eukaryotic host cells. SlrP is a Salmonella type III secretion effector with ubiquitin ligase activity. Here, we used two complementary proteomic approaches, two-dimensional gel electrophoresis and iTRAQ (isobaric tags for relative and absolute quantification) to study the consequences of the presence of SlrP in human epithelial cells. We identified 37 proteins that were differentially expressed in HeLa cells expressing slrP compared to control cells. Microarray analysis revealed that more than a half of differentially expressed proteins did not show changes in the transcriptome, suggesting post-transcriptional regulation. A gene ontology overrepresentation test carried out on the differentially expressed proteins revealed enrichment of ontology terms related to several types of junctions mediating adhesion in epithelial cells. Consistently, slrP-transfected cells showed defects in migration and adhesion. Our results suggest that the modification of cell-cell interaction ability of the host could be one of the final consequences of the action of SlrP during an infection.

Grape skin extracts from winemaking by-products as a source of trapping agents for reactive carbonyl species.

BACKGROUND: Clinical evidence supports the relationship between carbonyl stress and type II diabetes and its related pathologies. Methylglyoxal (MGO) is the major dicarbonyl compound involved in carbonyl stress. Efforts are therefore being made to find dietary compounds from natural sources that could exert an MGO trapping response. RESULTS: The in vitro MGO trapping capacity of six red and seven white grape skin extracts (GSE) obtained from winemaking by-products was investigated. Methanolic GSE exhibited a promising MGO trapping capacity that was higher in red GSE (IC50 2.8 mg mL(-1)) when compared with white GSE (IC50 3.2 mg mL(-1)). The trapping ability for red GSE correlated significantly with total phenolic content and antioxidant capacity. However, no correlations were observed for white GSE, which suggests that other compounds were involved in the trapping activity. CONCLUSION: GSE may be considered a natural source of carbonyl stress inhibitors, thus opening up its possible utilization as a nutraceutical ingredient. Further investigations are required to understand the mechanism involved in the carbonyl trapping ability of red and white grape skin samples and their relationship with glycation.