RESUMO
BACKGROUND: Prefabricated metal crowns (PMCs) have been widely used in pediatric dentistry due to their great success in various clinical situations. However, it is important to know the local effects, such as changes in pH in the oral environment. OBJECTIVE: To evaluate the pH variations before and after placement of PMCs. METHODS: A quasi-experimental study (before and after) was performed with 32 pediatric patients who needed rehabilitation with PMCs at a pediatric dentistry clinic in a public university. Measurements were made using a pH potentiometer before PMC placement, one week after, and one month after placement. ANOVA and Pearson correlation were performed in SPSS. RESULTS: The average age of the participants was 5.9 ± 1.6 years, and 53.1% were female. The average pH before, one week after, and one month after crown placement was 7.46 ± 0.37, 7.00 ± 0.32, and 7.1 ± 0.19, respectively. Significant differences (p< 0.05) were observed between the three pH measurements. We found differences when comparing the basal pH values to those at one week (p= 0.001) and one month (p= 0.002). CONCLUSION: Although there were statistically significant differences in the pH change values before and after the placement of crowns, these differences may not have a clinical impact.
Assuntos
Coroas , Dente Decíduo , Humanos , Criança , Feminino , Pré-Escolar , Masculino , Metais , Concentração de Íons de HidrogênioRESUMO
BACKGROUND: The purpose of the study is to assess the antiadherent and antibacterial properties of surface-modified different orthodontic brackets with silver nanoparticles against Streptococcus mutans and Streptococcus sobrinus, using radiomarker. METHODS: In this study evaluated quantitatively the adherence of Streptococci to orthodontic brackets, 300 samples of orthodontic brackets were selected and classified in to 10 groups as follow: GIn (InVu-Roth), GIIn (System-AlexanderLTS), GIIIn (Gemini-Roth), GIVn (NuEdge-Roth), GVn (Radiance plus-Roth), GVI (InVu-Roth), GVII (System-AlexanderLTS), GVIII (Gemini-Roth), GIX (NuEdge-Roth), GX (Radiance plus-Roth). All the samples were sonicated and Streptococci were cultivated by gender. A radioactive marker (3H) was used to codify the bacteria and measure them. After that, the brackets were submerged in a radiolabelled solution, and the radiation was measured. The statistical analysis was calculated with ANOVA test (Sheffè post hoc). RESULTS: The results showed significant differences were found among the groups. GIIIn shown the lowest scores for both bacteria; in contrast, GIX for Streptococcus mutans and GVI for Streptococcus sobrinus were the highest values. CONCLUSIONS: Surface modification of orthodontic brackets with silver nanoparticles can be used to prevent the accumulation of dental plaque and the development of dental caries during orthodontic treatment.
Assuntos
Cárie Dentária , Nanopartículas Metálicas , Braquetes Ortodônticos , Ortodontia , Humanos , Prata , Streptococcus mutans , Streptococcus sobrinusRESUMO
The metal alloys used in dentistry are made mainly of nickel (Ni), titanium (Ti), and other elements such as molybdenum (Mo), zirconium (Zr), iron (Fe), tin (Sn), chrome (Cr), carbon (C), copper (Cu) and niobium (Nb) which can release metal ions in unstable environments. The aim of this work was determine the salivary pH before and during orthodontic treatment; evaluate the release of metal ions, mainly Ni and Ti, in urine and saliva using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES); and evaluate the corrosion using Scanning Electronic Microscopy (SEM). In this study, we selected 35 individuals under orthodontic treatment, from whom saliva and urine samples were collected in 3 stages: (a) basal, (b) at 3 and (c) 6 months after the placement of the fixed appliances. SEM analyzed the Ni-Ti (0.016â³) and stainless steel (SS) (0.016 × 0.022â³) archs after 1 month of being in contact with the oral cavity. Statistical analysis was performed with Stata using the ANOVA model of repeated measures with a p < 0.05. A statistically significant difference in the concentration of Ni in saliva were found between 3 and 6 months of intervention and Ti in urine was found 3 and 6 months.
Assuntos
Ligas Dentárias/uso terapêutico , Níquel/uso terapêutico , Saliva/efeitos dos fármacos , Titânio/uso terapêutico , Adolescente , Ligas/química , Ligas/uso terapêutico , Criança , Cobre/uso terapêutico , Cobre/urina , Ligas Dentárias/efeitos adversos , Feminino , Humanos , Íons/urina , Ferro/uso terapêutico , Ferro/urina , Masculino , Molibdênio/uso terapêutico , Molibdênio/urina , Níquel/efeitos adversos , Níquel/urina , Nióbio/uso terapêutico , Nióbio/urina , Aço Inoxidável/química , Titânio/efeitos adversos , Titânio/urina , Zircônio/uso terapêutico , Zircônio/urinaRESUMO
CONTEXT: The fluoride release of sealants in vitro shows a marked decrease. Giomers are distinguishable from manufactured resin-based sealants and contain prereacted glass-ionomer particles (PRG). AIMS: To compare the amounts of fluoride released from the main pit and fissure of a resin-based sealant with that from a Giomer and to assess the abilities of the sealant and the Giomer to recharge when exposed to regular use of fluoride rinse. MATERIALS AND METHODS: The readings for the fluoride concentration were carried out for 60 days using a fluoride ion-specific electrode. After this period, the samples were recharged using a fluoride mouth rinse. The amount of fluoride released after this recharge was determined for 5 days. The data were analyzed using Student's t- and analysis of variance tests. RESULTS: In general, all materials presented higher fluoride release in the first 24 h; G1 and G4 showed a higher fluoride release in this period. On the other hand, G3 and G1 presented the most constant fluoride release until the 8(th) day, wherein all the sealants considerably decreased in the amount of fluoride released. CONCLUSION: G1 and G3 released higher concentrations of fluoride, although no significant differences were found. Giomers recharged in the first 24 h after polymerization presented an improved and sustained fluoride release.
RESUMO
The use of nanoparticles (NPs) has become a significant area of research in Dentistry. Objective The aim of this study was to investigate the physical, antibacterial activity and bond strength properties of conventional base, core build and restorative of glass ionomer cement (GIC) compared to GIC supplemented with titanium dioxide (TiO2) nanopowder at 3% and 5% (w/w). Material and Methods Vickers microhardness was estimated with diamond indenter. Compressive and flexural strengths were analyzed in a universal testing machine. Specimens were bonded to enamel and dentine, and tested for shear bond strength in a universal testing machine. Specimens were incubated with S. mutans suspension for evaluating antibacterial activity. Surface analysis of restorative conventional and modified GIC was performed with SEM and EDS. The analyses were carried out with Kolmogorov-Smirnov, ANOVA (post-hoc), Tukey test, Kruskal-Wallis, and Mann Whitney. Results Conventional GIC and GIC modified with TiO2 nanopowder for the base/liner cement and core build showed no differences for mechanical, antibacterial, and shear bond properties (p>0.05). In contrast, the supplementation of TiO2 NPs to restorative GIC significantly improved Vickers microhardness (p<0.05), flexural and compressive strength (p<0.05), and antibacterial activity (p<0.001), without interfering with adhesion to enamel and dentin. Conclusion GIC supplemented with TiO2 NPs (FX-II) is a promising material for restoration because of its potential antibacterial activity and durable restoration to withstand the mastication force.
Assuntos
Antibacterianos/química , Colagem Dentária/métodos , Cimentos de Ionômeros de Vidro/química , Nanopartículas/química , Titânio/química , Análise de Variância , Força Compressiva , Esmalte Dentário/efeitos dos fármacos , Dentina/efeitos dos fármacos , Testes de Dureza , Teste de Materiais , Microscopia Eletrônica de Varredura , Maleabilidade , Valores de Referência , Resistência ao Cisalhamento , Estatísticas não Paramétricas , Streptococcus mutans/efeitos dos fármacos , Propriedades de SuperfícieRESUMO
BACKGROUND: Chemomechanical caries removal system is part of the minimal invasive dentistry; the aim of the study was to compare the amount of bacteria after caries removal with chemomechanical system and conventional rotatory instruments and to test the Vickers microhardness and micro-RAMAN analysis of residual dentin after excavation. MATERIALS AND METHODS: Molars were induced for demineralization, confirmed with DIAGNOdent; Streptococcus mutans were inoculated into the cavities and filled. Caries removal was performed with rotatory instruments and chemomechanical system; surviving bacteria were cultured for 24 and 48 hours at 37°C. Vickers microhardness and micro-RAMAN analysis were tested after excavation. Data were analyzed with Wilcoxon, continuity correction, odds ratio, ANOVA post hoc Tukey test, and Spearman correlation. RESULTS: Demineralization was significantly detectable at 240 hours of incubation; conventional rotatory instruments and chemomechanical caries removal were effective in 19.4%-22.6% and 25.8%-32.3%, respectively. Vickers microhardness of chemomechanical system was higher (P < 0.0001) than conventional rotatory instruments and comparable to healthy dentin. Micro-RAMAN analysis showed that healthy dentin is correlated to chemomechanical system (R (2) = 0.683, P < 0.00001) and drilling with burs (R (2) = 0.139, P < 0.00001). CONCLUSION: The chemomechanical system is effective for caries elimination, comparable to conventional rotatory instruments; the remaining Vickers microhardness and composition surface tissue are similar to healthy dentin.
RESUMO
The use of nanoparticles (NPs) has become a significant area of research in Dentistry. Objective The aim of this study was to investigate the physical, antibacterial activity and bond strength properties of conventional base, core build and restorative of glass ionomer cement (GIC) compared to GIC supplemented with titanium dioxide (TiO2) nanopowder at 3% and 5% (w/w). Material and Methods Vickers microhardness was estimated with diamond indenter. Compressive and flexural strengths were analyzed in a universal testing machine. Specimens were bonded to enamel and dentine, and tested for shear bond strength in a universal testing machine. Specimens were incubated with S. mutans suspension for evaluating antibacterial activity. Surface analysis of restorative conventional and modified GIC was performed with SEM and EDS. The analyses were carried out with Kolmogorov-Smirnov, ANOVA (post-hoc), Tukey test, Kruskal-Wallis, and Mann Whitney. Results Conventional GIC and GIC modified with TiO2 nanopowder for the base/liner cement and core build showed no differences for mechanical, antibacterial, and shear bond properties (p>0.05). In contrast, the supplementation of TiO2 NPs to restorative GIC significantly improved Vickers microhardness (p<0.05), flexural and compressive strength (p<0.05), and antibacterial activity (p<0.001), without interfering with adhesion to enamel and dentin. Conclusion GIC supplemented with TiO2 NPs (FX-II) is a promising material for restoration because of its potential antibacterial activity and durable restoration to withstand the mastication force. .