RESUMO
High-throughput and large-scale data are part of a new era of plant remote sensing science. Quantification of the yield, energetic content, and chlorophyll a fluorescence (ChlF) remains laborious and is of great interest to physiologists and photobiologists. We propose a new method that is efficient and applicable for estimating photosynthetic performance and photosystem status using remote sensing hyperspectroscopy with visible, near-infrared and shortwave spectroscopy (Vis-NIR-SWIR) based on rapid multivariate partial least squares regression (PLSR) as a tool to estimate biomass production, calorimetric energy content and chlorophyll a fluorescence parameters. The results showed the presence of typical inflections associated with chemical and structural components present in plants, enabling us to obtain PLSR models with R2P and RPDP values greater than >0.82 and 3.33, respectively. The most important wavelengths were well distributed into 400 (violet), 440 (blue), 550 (green), 670 (red), 700−750 (red edge), 1330 (NIR), 1450 (SWIR), 1940 (SWIR) and 2200 (SWIR) nm operating ranges of the spectrum. Thus, we report a methodology to simultaneously determine fifteen attributes (i.e., yield (biomass), ΔH°area, ΔH°mass, Fv/Fm, Fv'/Fm', ETR, NPQ, qP, qN, ΦPSII, P, D, SFI, PI(abs), D.F.) with high accuracy and precision and with excellent predictive capacity for most of them. These results are promising for plant physiology studies and will provide a better understanding of photosystem dynamics in tobacco plants when a large number of samples must be evaluated within a short period and with remote acquisition data.
RESUMO
Plant cell walls are a fundamental component of plant biology and play an essential role in plant growth and development. The metabolic components of the cell wall can be investigated in a fast, simple, and highly efficient manner using various and distinct microscopy techniques. Here, we report implementing a flowchart to analyse tobacco plants' structural, ultrastructural, and metabolic components supplemented with far-red light. In addition, biochemical components, such as lignin, cellulose, phenolic compounds, and reducing sugars, present in the plant cell walls were quantified using light, fluorescence, and electron microscopy. Our data were generated from samples prepared via tissue fixation, incorporation in resins, and slicing using microtomes. Moreover, we have used routine staining and contrast techniques to characterise plant cell walls. Here, we describe several protocols that use classic and modern techniques as well as qualitative and quantitative analytical methods to study cell walls, enabling the plant research community to understand and select the most suitable methods for the microscopic analysis of metabolic components. Finally, we discuss specific ideas aimed at new students of plant anatomy and microscopy. This research not only described the structural, ultrastructural, and metabolic components of the plant cell wall, but also explained the strategies for understanding cellular development.
RESUMO
Green or purple lettuce varieties produce many secondary metabolites, such as chlorophylls, carotenoids, anthocyanins, flavonoids, and phenolic compounds, which is an emergent search in the field of biomolecule research. The main objective of this study was to use multivariate and machine learning algorithms on Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR)-based spectra to classify, predict, and categorize chemometric attributes. The cluster heatmap showed the highest efficiency in grouping similar lettuce varieties based on pigment profiles. The relationship among pigments was more significant than the absolute contents. Other results allow classification based on ATR-FTIR fingerprints of inflections associated with structural and chemical components present in lettuce, obtaining high accuracy and precision (>97%) by using principal component analysis and discriminant analysis (PCA-LDA)-associated linear LDA and SVM machine learning algorithms. In addition, PLSR models were capable of predicting Chla, Chlb, Chla+b, Car, AnC, Flv, and Phe contents, with R2P and RPDP values considered very good (0.81−0.88) for Car, Anc, and Flv and excellent (0.91−0.93) for Phe. According to the RPDP metric, the models were considered excellent (>2.10) for all variables estimated. Thus, this research shows the potential of machine learning solutions for ATR-FTIR spectroscopy analysis to classify, estimate, and characterize the biomolecules associated with secondary metabolites in lettuce.
RESUMO
Optical leaf profiles depend on foliar pigment type and content, as well as anatomical aspects and cellular ultrastructure, whose effects are shown in several species. Monocotyledon and Dicotyledon plants presenting natural pigment content variations and anatomical alterations were analyzed. Each plant species displays its own spectral signatures, which are, in turn, influenced by foliar pigment class (composition) and concentration, as well as anatomical and ultrastructural plant cell characteristics. Plants with no anthocyanin displayed increased reflectance and transmittance in the green spectral region (501-565 nm), while values decreased in the presence of anthocyanin. At wavelengths below 500 nm (350-500 nm), strong overlapping signatures of phenolics, carotenoids, chlorophylls, flavonoids and anthocyanins were observed. Using a partial least squares regression applied to 350-700 nm spectral data allowed for accurate estimations of different foliar pigment levels. In addition, a PCA and discriminant analysis were able to efficiently discriminate different species displaying spectra overlapping. The use of absorbance spectra only was able to discriminate species with 100 % confidence. Finally, a discussion on how different wavelengths are absorbed and on anatomical interference of light interaction in leaf profiles is presented.
Assuntos
Pigmentos Biológicos/análise , Folhas de Planta/fisiologia , Espectrofotometria/métodos , Cordyline/fisiologia , Philodendron/fisiologia , Poaceae/fisiologia , Especificidade da Espécie , Tradescantia/fisiologiaRESUMO
Light affects many aspects of cell development. Tomato seedlings growing at different light qualities (white, blue, green, red, far-red) and in the dark displayed alterations in cell wall structure and composition. A strong and negative correlation was found between cell wall thickness and hypocotyl growth. Cell walls was thicker under blue and white lights and thinner under far-red light and in the dark, while intermediate values was observed for red or green lights. Additionally, the inside layer surface of cell wall presented random deposited microfibrillae angles under far-red light and in the dark. However, longitudinal transmission electron microscopy indicates a high frequency of microfibrils close to parallels related to the elongation axis in the outer layer. This was confirmed by ultra-high resolution small angle X-ray scattering. These data suggest that cellulose microfibrils would be passively reoriented in the longitudinal direction. As the cell expands, the most recently deposited layers (inside) behave differentially oriented compared to older (outer) layers in the dark or under FR lights, agreeing with the multinet growth hypothesis. High Ca and pectin levels were found in the cell wall of seedlings growing under blue and white light, also contributing to the low extensibility of the cell wall. Low Ca and pectin contents were found in the dark and under far-red light. Auxins marginally stimulated growth in thin cell wall circumstances. Hypocotyl growth was stimulated by gibberellins under blue light.
Assuntos
Parede Celular/fisiologia , Luz , Solanum lycopersicum/fisiologia , Antocianinas/análise , Cálcio/metabolismo , Parede Celular/química , Cromatografia Líquida de Alta Pressão , Solanum lycopersicum/crescimento & desenvolvimento , Solanum lycopersicum/efeitos da radiação , Microfibrilas/química , Microscopia Eletrônica de Transmissão , Pectinas/metabolismo , Reguladores de Crescimento de Plantas/análise , Reguladores de Crescimento de Plantas/metabolismo , Análise de Componente Principal , Espalhamento a Baixo Ângulo , Plântula/crescimento & desenvolvimento , Plântula/fisiologia , Plântula/efeitos da radiação , Difração de Raios XRESUMO
A nitrogen supply is necessary for all plants. The multifaceted reasons why this nutrient stimulates plant dry weight accumulation are assessed herein. We compared tomato plants grown in full sunlight and in low light environments under four N doses and evaluated plant growth, photosynthetic and calorimetric parameters, leaf anatomy, chloroplast transmission electron microscopy (TEM) and a high resolution profile of optical leaf properties. Increases in N supplies allow tomato plants to grow faster in low light environments (91.5% shading), displaying a robust light harvesting machinery and, consequently, improved light harvesting efficiency. Ultrastructurally, high N doses were associated to a high number of grana per chloroplast and greater thylakoid stacking, as well as high electrodensity by TEM. Robust photosynthetic machinery improves green light absorption, but not blue or red. In addition, low construction and dark respiration costs were related to improved total dry weight accumulation in shade conditions. By applying multivariate analyses, we conclude that improved green light absorbance, improved quantum yield and greater palisade parenchyma cell area are the primary components that drive increased plant growth under natural light-limited photosynthesis.
Assuntos
Nitrogênio/metabolismo , Fotossíntese , Solanum lycopersicum/metabolismo , Tilacoides/fisiologia , Calorimetria , Respiração Celular , Solanum lycopersicum/efeitos da radiação , Solanum lycopersicum/ultraestrutura , Microscopia Eletrônica de Transmissão , Análise Multivariada , Folhas de Planta/ultraestrutura , Análise de Componente Principal , Luz Solar , Tilacoides/ultraestruturaRESUMO
Light intensity and hormones (gibberellins; GAs) alter plant growth and development. A fine regulation triggered by light and GAs induces changes in stem cell walls (CW). Cross-talk between light-stimulated and GAs-induced processes as well as the phenolic compounds metabolism leads to modifications in lignin formation and deposition on cell walls. How these factors (light and GAs) promote changes in lignin content and composition. In addition, structural changes were evaluated in the stem anatomy of tobacco plants. GA3 was sprayed onto the leaves and paclobutrazol (PAC), a GA biosynthesis inhibitor, via soil, at different irradiance levels. Fluorescence microscopy techniques were applied to detect lignin, and electron microscopy (SEM and TEM) was used to obtain details on cell wall structure. Furthermore, determination of total lignin and monomer contents were analyzed. Both light and GAs induces increased lignin content and CW thickening as well as greater number of fiber-like cells but not tracheary elements. The assays demonstrate that light exerts a role in lignification under GA3 supplementation. In addition, the existence of an exclusive response mechanism to light was detected, that GAs are not able to replace.