RESUMO
Atherosclerosis still represents a major driver of cardiovascular diseases worldwide. Together with accumulation of lipids in the plaque, inflammation is recognized as one of the key players in the formation and development of atherosclerotic plaque. Systemic anti-inflammatory treatments are successful in reducing the disease burden, but are correlated with severe side effects, underlining the need for targeted formulations. In this work, curcumin is chosen as the anti-inflammatory payload model and further loaded in lignin-based nanoparticles (NPs). The NPs are then coated with a tannic acid (TA)- Fe (III) complex and further cloaked with fragments derived from platelet cell membrane, yielding NPs with homogenous size. The two coatings increase the interaction between the NPs and cells, both endothelial and macrophages, in steady state or inflamed status. Furthermore, NPs are cytocompatible toward endothelial, smooth muscle and immune cells, while not inducing immune activation. The anti-inflammatory efficacy is demonstrated in endothelial cells by real-time quantitative polymerase chain reaction and ELISA assay where curcumin-loaded NPs decrease the expression of Nf-κb, TGF-ß1, IL-6, and IL-1ß in lipopolysaccharide-inflamed cells. Overall, due to the increase in the cell-NP interactions and the anti-inflammatory efficacy, these NPs represent potential candidates for the targeted anti-inflammatory treatment of atherosclerosis.
Assuntos
Anti-Inflamatórios , Aterosclerose , Plaquetas , Curcumina , Nanopartículas , Curcumina/química , Curcumina/farmacologia , Aterosclerose/tratamento farmacológico , Humanos , Nanopartículas/química , Plaquetas/metabolismo , Plaquetas/efeitos dos fármacos , Anti-Inflamatórios/química , Anti-Inflamatórios/farmacologia , Anti-Inflamatórios/administração & dosagem , Animais , Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Células Endoteliais da Veia Umbilical Humana , Taninos/química , Taninos/farmacologia , Células RAW 264.7 , Camundongos , Macrófagos/efeitos dos fármacos , Macrófagos/metabolismoRESUMO
In recent years, 3D printing has attracted great interest in the pharmaceutical field as a promising tool for the on-demand manufacturing of patient-centered pharmaceutical forms. Among the existing 3D printing techniques, direct powder extrusion (DPE) resulted as the most practical approach thanks to the possibility to directly process excipients and drugs in a single step. The main goal of this work was to determine whether different grades of ethylene vinyl acetate (EVA) copolymer might be employed as new feedstock materials for the DPE technique to manufacture transdermal patches. By selecting two model drugs with different thermal behavior, (i.e., ibuprofen and diclofenac sodium) we also wanted to pay attention to the versatility of EVA excipient in preparing patches for customized transdermal therapies. EVA was combined with 30 % (w/w) of each model drugs. The physicochemical composition of the printed devices was investigated through Fourier-transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analyses. FT-IR spectra confirmed that the starting materials were effectively incorporated into the final formulation, and thermal analyses demonstrated that the extrusion process altered the crystalline morphology of the raw polymers inducing the formation of crystals at lower thicknesses. Lastly, the drug release and permeation profile of the printed systems was evaluated for 48 h and showed to be dependent on the VA content of the EVA grade (74.5 % of ibuprofen released from EVA 4030AC matrix and 12.6 % of diclofenac sodium released from EVA1821A matrix). Hence, this study demonstrated that EVA and direct powder extrusion technique could be promising tools for manufacturing transdermal patches. By selecting the EVA grade with the appropriate VA content, drugs with dissimilar melting points could be printed preserving their thermal stability. Moreover, the desired drug release and permeation profile of the drug can be achieved, representing an important advantage in terms of personalized medicine.
Assuntos
Diclofenaco , Ibuprofeno , Humanos , Pós , Espectroscopia de Infravermelho com Transformada de Fourier , Liberação Controlada de Fármacos , Impressão Tridimensional , ComprimidosRESUMO
Breast-conserving surgery (BCS) is the primary strategy for treating early-stage breast cancer; however, the incidence of local recurrence and breast tissue loss negatively impacts patients and survivors. Furthermore, radiotherapy and/or systemic therapies are frequently advised to avoid recidivism and increase the patient's chance of survival, resulting in longer duration of treatments, and unpleasant systemic side effects. Given the poor prognosis and the heterogeneity between individuals and tumors, a patient-centered approach is fundamental. Herein we developed a multipurpose 4D printed implant made of a blend of carboxymethyl cellulose sodium salt (CMC) and cellulose nanocrystals (CNC), loaded with doxorubicin (DOX). To predict printability performance, full rheological characterization was carried out. The smart device was programmed to change size, under swelling, to better fit in the tissue cavity, resulting in a great potential for personalization, thus improving the aesthetic outcomes. The influence of the formulation and printing parameters on the morpho transformation was investigated through the swelling test, confirming the possibility to program the 4D shape. The manufactured implants were characterized by a variety of methods, including in vitro release studies. Lastly, the anticancer activity was conducted in vitro, on MDA-MB-231 cells. Implants promoted an anticancer effect of -58% viability after 72 h incubation, even when tested 4 weeks after the printing process. Overall, the morpho transformation and the in vitro studies have shown that the implant could represent a potential strategy for breast cancer following resection, to fill the void in the breast resulting from the surgery and provide an anticancer effect to avoid recurrence.
Assuntos
Neoplasias da Mama , Humanos , Feminino , Neoplasias da Mama/patologia , Doxorrubicina , Próteses e ImplantesRESUMO
LEDs development has attracted attention over conventional mercury lamps for the tiny size, high efficiency, long lifetime, low operating temperature. The antimicrobial effectiveness of traditional UV-lamps radiation (wavelength of 254 nm) compared to UV-C LEDs (LED1 wavelength range 275-286 nm and LED2 range 260-270 nm) was carried out, for possible applications to automated sterile drug compounding. The UV lamp and the tested UV-LED devices remarkably reduced microbial load, following a time-dose response, but the best performance was evidenced by LED1, which guaranteed the complete inactivation of high concentrations of bacteria, yeasts, and spores at doses between 200 and 2000 J/m2.
Assuntos
Desinfecção , Raios Ultravioleta , Viabilidade Microbiana , Composição de Medicamentos , BactériasRESUMO
Diabetic foot ulcers (DFUs) are a crucial complication of diabetes, as in a diabetic wound, each step of the physiological healing process is affected. This entails a more easily infectable wound, and delayed tissue regeneration due to the inflammation that occurs, leading to a drastic decrease in the overall patient's quality of life. As a strategy to manage DFUs, skin alternatives and wound dressings are currently receiving a lot of attention as they keep the wound environment "under control", while providing bioactive compounds that help to manage infection and inflammation and promote tissue repair. This has been made possible thanks to the advent of emerging technologies such as 3D Bioprinting to produce skin resembling constructs or microfluidics (MFs) that allows the manufacture of nanoparticles (NPs) that act as drug carriers, in a prompt and less expensive way. In the present proof-of-concept study, the possibility of combining two novel and appealing techniques in the manufacturing of wound dressings has been demonstrated for first time. The novelty of this work consists in the combination of liposomes (LPs) encapsulating the active pharmaceutical ingredient (API) into a hydrogel that is further printed into a three-dimensional scaffold for wound dressing; to the knowledge of the authors this has never been done before. A grid-shaped scaffold has been produced through the coaxial 3D bioprinting technique which has allowed to combine, in one single filament, two different bioinks. The inner core of the filament is a nanocomposite hydrogel consisting of hydroxyethyl cellulose (HEC) and PEGylated LPs encapsulated with thyme oil (TO) manufactured via MFs for the first time. The outer shell of the filament, instead, is represented by a hybrid hydrogel composed of sodium alginate/cellulose nanocrystals (SA/CNC) and enriched with free TO. This provides a combination of two different release ratios of the API, a bulk release for the first 24 h thanks to the free TO in the shell of the filament and a sustained release for up to 10 days provided from the API inside the LPs. Confocal Microscopy verified the actual presence of the LPs inside the scaffold after printing and evaluation using the zone of inhibition test proved the antibacterial activity of the manufactured scaffolds against both Gram-positive and Gram-negative bacteria.
Assuntos
Bioimpressão , Diabetes Mellitus , Pé Diabético , Humanos , Antibacterianos , Lipopolissacarídeos , Microfluídica , Qualidade de Vida , Bactérias Gram-Negativas , Bactérias Gram-Positivas , Bandagens , Hidrogéis , Pé Diabético/tratamento farmacológico , Cicatrização , Inflamação , Celulose/uso terapêuticoRESUMO
Breast cancer is the second most common cancer worldwide, characterized by a high incidence and mortality rate. Despite the advances achieved in cancer management, improvements in the quality of life of breast cancer survivors are urgent. Moreover, considering the heterogeneity that characterizes tumors and patients, focusing on individuality is fundamental. In this context, 3D printing (3DP) and 4D printing (4DP) techniques allow for a patient-centered approach. At present, 3DP applications against breast cancer are focused on three main aspects: treatment, tissue regeneration, and recovery of the physical appearance. Scaffolds, drug-loaded implants, and prosthetics have been successfully manufactured; however, some challenges must be overcome to shift to clinical practice. The introduction of the fourth dimension has led to an increase in the degree of complexity and customization possibilities. However, 4DP is still in the early stages; thus, research is needed to prove its feasibility in healthcare applications. This review article provides an overview of current approaches for breast cancer management, including standard treatments and breast reconstruction strategies. The benefits and limitations of 3DP and 4DP technologies are discussed, as well as their application in the fight against breast cancer. Future perspectives and challenges are outlined to encourage and promote AM technologies in real-world practice.
Assuntos
Neoplasias da Mama , Neoplasias da Mama/terapia , Feminino , Humanos , Impressão Tridimensional , Qualidade de VidaRESUMO
During the past decades, 3D printing has revolutionised different areas of research. Despite the considerable progress achieved in 3D printing of pharmaceuticals, the limited choice of suitable materials remains a challenge to overcome. The growing search for sustainable excipients has led to an increasing interest in biopolymers. Poly(3-hydroxybutyrate) (PHB) is a biocompatible and biodegradable biopolymer obtained from bacteria that could be efficiently employed in the pharmaceutical field. Here we aimed to demonstrate its potential application as a thermoplastic material for personalised medicine through 3D printing. More specifically, we processed PHB by using direct powder extrusion, a one-step additive manufacturing technique. To assess and denote the feasibility and versatility of the process, a 3D square model was manufactured in different dimensions (sidexheight: 12x2 mm; 18x2 mm; 24x2 mm) and loaded with increasing percentages of a model drug (up to 30% w/w). The manufacturing process was influenced by the drug content, and indeed, an increase in the amount of the drug determined a reduction in the printing temperature, without affecting the other parameters (such as the layer height). The composition of the model squares was investigated using Fourier-transform infrared spectroscopy, the resulting spectra confirmed that the starting materials were successfully incorporated into the final formulations. The thermal behaviour of the printed systems was characterized by differential scanning calorimetry, and thermal gravimetric analysis. Moreover, the sustained drug release profile of the formulations was performed over 21 days and showed to be dependent on the dimensions of the printed object and on the amount of loaded drug. Indeed, the formulation with 30% w/w in the dimension 24x2 mm released the highest amount of drug. Hence, the results suggested that PHB and direct powder extrusion technique could be promising tools for the manufacturing of prolonged release and personalised drug delivery forms.
Assuntos
Excipientes , Tecnologia Farmacêutica , Ácido 3-Hidroxibutírico , Liberação Controlada de Fármacos , Excipientes/química , Hidroxibutiratos , Preparações Farmacêuticas , Poliésteres , Pós , Impressão Tridimensional , Comprimidos/química , Tecnologia Farmacêutica/métodosRESUMO
Developing targeted drug delivery systems is an urgent need to decrease the side effects and increase the drug's efficiency. Most cancer cells show an increased sugar consumption compared to healthy cells due to the deregulation of sugar transporters. Consequently, liposomes, as a biocompatible nanocarrier, could be surface decorated by sugars to enhance drug targeting into cancer cells. Our work outlines a new strategy to easily manufacture sucrose decorated liposomes using sucrose stearate, a biocompatible and biodegradable non-ionic surfactant, with a scalable microfluidic approach. Sucrose decorated liposomes were loaded with berberine hydrochloride, a well-known phytochemical compound to investigate its effects on triple-negative breast cancer cells (MDA-MB-231). Using the microfluidic manufacturing system, we prepared berberine-loaded liposomes using a mixture of phosphatidylcholine and cholesterol with and without sucrose stearate with a size up to 140 nm and narrow polydispersity. Stability was confirmed for 90 days, and the in vitro release profile was evaluated. The formulations showed acceptable in vitro biocompatibility and significantly higher anti-proliferative effect on MDA-MB-231 cell line. These results have been confirmed by an increased uptake evaluated by flow cytometry and confocal microscopy. Taken together, our findings represent an innovative, easy, and scalable approach to obtain sugar decorated liposomal formulations without any surface-chemistry reactions. They can be potentially used as an anticancer targeted drug delivery system.