Diversifying the skin cancer-fighting worthwhile frontiers: How relevant are the itraconazole/ascorbyl palmitate nanovectors?

Fighting malignant neoplasms via repurposing existing drugs could be a welcome move for prosperous cancer remediations. In the current work, nanovehiculation and optimization of the repositioned itraconazole (ITZ) utilizing ascorbyl palmitate (AP) aspasomes would be an auspicious approach. Further, the optimized aspasomes were incorporated in a cream and tracked for skin deposition. The in vivo efficacy of aspasomal cream on mice subcutaneous Ehrlich carcinoma model was also assessed. The optimized aspasomes revealed nano size (67.83 ± 6.16 nm), negative charge (-79.40 ± 2.23 mV), > 95% ITZ entrapment and high colloidal stability. AP yielded substantial antioxidant capacity and pushed the ITZ cytotoxicity forward against A431 cells (IC50 = 5.3±0.27 µg/mL). An appealing privilege was the aspasomal cream that corroborated spreadability, contemplated skin permeation and potentiated in vivo anticancer competence, reflected in 62.68% reduction in the tumor weight. Such synergistic tumor probes set the foundation for futuristic clinical translation and commercialization.

Augmented simvastatin cytotoxicity using optimized lipid nanocapsules: a potential for breast cancer treatment.

CONTEXT: We noticed paucity in exploiting solutol-based lipid nanocapsules in statins formulations though they carry all favorable properties that are needed for cancer passive targeting such as their small particle size, stealth properties, ability to highly accommodate lipophilic drugs, good internalization and P-gp pump inhibition. OBJECTIVE: The aim of this study was to design and optimize new simvastatin drug delivery systems; lipid nanocapsules intended for administration through the intravenous route as potential treatment for breast cancer. METHODS: Optimized nanocapsules were prepared by the phase-inversion method according to a D-optimal mixture design, characterized and assessed for their cytotoxicity. RESULTS: Three successful models for particle size, polydispersity index (PDI) and percentage of drug released after 48 h were generated. The prepared lipid nanocapsules acquired spherical and homogenous morphology, good stability and tolerance to sterilization. The obtained release profiles demonstrated desired sustained release pattern. Furthermore, testing selected formulations on human breast cancer adenocarcinoma cells showed augmented cytotoxicity of simvastatin reaching low IC50 values as 1.4 ± 0.02 µg/ml compared to the pure drug. CONCLUSION: The proposed lipid nanocapsules pose promising candidates as simvastatin carriers intended for the targeting of breast cancer.

Nanostructured lipid carriers loaded with simvastatin: effect of PEG/glycerides on characterization, stability, cellular uptake efficiency and in vitro cytotoxicity.

OBJECTIVE: The aim of this study is to evaluate the use of PEG/glycerides of different HLB; oleoyl macrogol-6-glycerides (Labrafil® M 1944 CS) and caprylocaproylmacrogol-8-glycerides (Labrasol®), compared to Labrafac lipophile® as PEG-free glyceride in the preparation of nanostructured lipid carriers (NLCs). PEG/glycerides are suggested to perform a dual function; as the oily component, and as the PEG-containing substrate required for producing the PEGylated carriers without physical or chemical synthesis. METHODS: Lipid nanocarriers were loaded with simvastatin (SV) as a promising anticancer drug. An optimization study of NLC fabrication variables was first conducted. The effect of lyophilization was investigated using cryoprotectants of various types and concentrations. The prepared NLCs were characterized in terms of particle size (PS), size distribution (PDI), zeta potential (ZP), drug entrapment, in vitro drug release, morphology and drug-excipient interactions. The influence of glycerides ± PEG on the cytotoxicity of SV was evaluated on MCF-7 breast cancer cells, in addition to the cellular uptake of fluorescent blank NLCs. RESULTS: The alteration between different oil types had a significant impact on PS, ZP and drug release. Both sucrose and trehalose showed the lowest increase in PS and PDI of the reconstituted lyophilized NLCs. The in vitro cytotoxicity and cellular uptake studies indicated that SV showed the highest antitumor effect on MCF-7 cancer cells when loaded into Labrasol® NLCs demonstrating a high cellular uptake as well. CONCLUSION: The study confirms the applicability of PEG/glycerides in the development of NLCs. Encapsulating SV in Labrasol®-containing NLC could enhance the antitumor effect of the drug.

Impact of microparticle formulation approaches on drug burst release: a level A IVIVC.

AIM: To study the effect of poly(d,l-lactic-co-glycolic acid) (PLGA) microparticles (MPs) preparation techniques on particle physical characterization with special emphasis on burst drug release. METHODS: A basic drug clozapine was used in combination with acid-terminated PLGA. Two approaches for MP preparation were compared; the in situ forming microparticle (ISM) and the emulsion-solvent evaporation (ESE) methods using an experimental design. The MPs obtained were compared according to their physical characterization, burst release and T80%. An in vivo pharmacokinetic study with in vitro-in vivo correlation (IVIVC) was also performed for the selected formula. RESULTS: Both methods were able to sustain drug release for three weeks. ISM produced more porous particles and was not effective as ESE for controlling burst release. A good IVIVC (R(2) = 0.9755) was attained when injecting the selected formula into rats. CONCLUSION: MPs prepared with ESE showed a minimum burst release and a level A IVIVC was obtained when administered to rats.

Glucospanlastics: innovative antioxidant and anticancer ascorbyl-2-glucoside vesicles for striking topical performance of repurposed itraconazole.

Presently, the development of functional derivatives exploiting biocompatible pharmaceutical materials has become a pressing demand. Among them, ascorbyl-2-glucoside (AA-2G), an ascorbic acid derivative, has significant potential owing to its stability, solubilization and antioxidant prospects. Herein, AA-2G was utilized for the fabrication of itraconazole (ITZ) spanlastics, which were denoted as "glucospanlastics". Subsequently, the newly designed glucospanlastics were characterized to determine their dimensions, charge, entrapment, solubilization efficiency, morphology, stability and antioxidant activity. Further, their cytotoxicity towards A431 cells and their ex vivo skin deposition were investigated. Subsequently, the competence of the formulated cream containing glucospanlastics to suppress Ehrlich carcinoma and modulate the antioxidant profile was evaluated in vivo. The results revealed that the proposed nano-sized glucospanlastics performed better than conventional spanlastics (without AA-2G) with respect to optimal solubilization efficiency and ITZ entrapment (>95%) together with antioxidant, cytotoxic and skin permeation potentials. More importantly, glucospanlastics containing 10 and 20 mg AA-2G demonstrated considerable tumor suppression and necrosis, improvement in glutathione (GSH) content by 1.68- and 2.26-fold, elevation of total antioxidant capacity (TAC) levels by 1.67- and 2.84-fold and 1.78- and 2.03-fold reduction in malondialdehyde (MDA) levels, respectively, compared to a conventional ITZ cream. These innovative antioxidant vesicles show future potential for the dermal delivery of cancer-directed therapies.

WITHDRAWN: Resveratrol-based Delivery Systems as Contemporary Nominees for Combating Pulmonary Diseases: A Comprehensive Review

Since the authors are not responding to the editor's requests to fulfill the editorial requirement, therefore, the article has been withdrawn of the journal "Current Drug Delivery".Bentham Science apologizes to the readers of the journal for any inconvenience this may have caused.The Bentham Editorial Policy on Article Withdrawal can be found at https://benthamscience.com/editorial-policies-main.php BENTHAM SCIENCE DISCLAIMER: It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Furthermore, any data, illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. By submitting a manuscript the authors agree that the copyright of their article is transferred to the publishers if and when the article is accepted for publication.

Hydrophilic versus hydrophobic porogens for engineering of poly(lactide-co-glycolide) microparticles containing risedronate sodium.

OBJECTIVE: The aim of this study was to investigate the effect of two mechanistically different porogens, namely: the hydrophilic hydroxy-propyl-ß-cyclodextrin and the hydrophobic porogens (mineral oil and corn oil) in producing open/closed pored engineered polylactide-co-glycolic-acid microspheres suitable for pulmonary delivery of risedronate sodium (RS). MATERIALS AND METHODS: Surface morphology of the microspheres was studied and they were characterized for entrapment efficiency (%EE), particle size, and porosity as well as aerodynamic and flow properties. Selected formulae were investigated for in vitro drug release and deposition behavior using next generation impactor. Furthermore, the safety of the free drug and the selected prepared systems was assessed by MTT viability test performed on Calu-3 cell line. RESULTS AND DISCUSSION: The current work revealed that HP-ß-CD produced open-pored microspheres, while oils produced closed pored microspheres. Modulation of preparation parameters generated porous RS microspheres with high %EE, sustained drug release profile up to 15 days, suitable geometric and aerodynamic particle sizes and excellent flow properties. The safety of HP-ß-CD systems was higher than the systems utilizing oil as porogen. CONCLUSION: Porogen type affected the behavior of the microspheres as demonstrated by the various characterization experiments, with microspheres prepared using HP-ß-CD being superior to those prepared using oils as porogens.

Customizable resveratrol spray-dried micro-composites for inhalation as a promising contender for treatment of idiopathic pulmonary fibrosis.

The past decades have witnessed tremendous expansion in utilization of plant-derived medicines as resveratrol (RES) in treating several diseases like idiopathic pulmonary fibrosis (IPF). RES can exhibit its role in treating IPF via its outstanding antioxidant and anti-inflammatory activities. The goal of this work was to formulate RES-loaded spray-dried composite microparticles (SDCMs) suitable for pulmonary delivery via dry powder inhaler (DPI). They were prepared by spray drying of a previously prepared RES-loaded bovine serum albumin nanoparticles (BSA NPs) dispersion using different carriers. RES-loaded BSA NPs, prepared by the desolvation technique, acquired suitable particle size of 177.67 ± 0.95 nm and entrapment efficiency of 98.7 ± 0.35% with perfectly uniform size distribution and high stability. Considering the attributes of the pulmonary route, NPs were co-spray dried with compatible carriers viz. mannitol, dextran, trehalose, leucine, glycine, aspartic acid, and glutamic acid to fabricate SDCMs. All formulations showed suitable mass median aerodynamic diameter<5 µm; that is suitable for deep lung deposition. However, the best aerosolization behavior was attained from using leucine with fine particle fraction (FPF) of 75.74%, followed by glycine with FPF of 54.7%. Finally, a pharmacodynamic study was conducted on bleomycin-induced mice, and it strongly revealed the role of the optimized formulations in alleviating PF through suppressing the levels of hydroxyproline, tumor necrosis factor-α and matrix metalloproteinase-9 with obvious improvements in the treated lung histopathology. These findings indicate that in addition to leucine, the glycine amino acid, which is not commonly used yet, is very promising in the formulation of DPIs.

Travoprost Liquid Nanocrystals: An Innovative Armamentarium for Effective Glaucoma Therapy.

To date, the ophthalmic application of liquid crystalline nanostructures (LCNs) has not been thoroughly reconnoitered, yet they have been extensively used. LCNs are primarily made up of glyceryl monooleate (GMO) or phytantriol as a lipid, a stabilizing agent, and a penetration enhancer (PE). For optimization, the D-optimal design was exploited. A characterization using TEM and XRPD was conducted. Optimized LCNs were loaded with the anti-glaucoma drug Travoprost (TRAVO). Ex vivo permeation across the cornea, in vivo pharmacokinetics, and pharmacodynamic studies were performed along with ocular tolerability examinations. Optimized LCNs are constituted of GMO, Tween® 80 as a stabilizer, and either oleic acid or Captex® 8000 as PE at 25 mg each. TRAVO-LNCs, F-1-L and F-3-L, showed particle sizes of 216.20 ± 6.12 and 129.40 ± 11.73 nm, with EE% of 85.30 ± 4.29 and 82.54 ± 7.65%, respectively, revealing the highest drug permeation parameters. The bioavailability of both attained 106.1% and 322.82%, respectively, relative to the market product TRAVATAN®. They exhibited respective intraocular pressure reductions lasting for 48 and 72 h, compared to 36 h for TRAVATAN®. All LCNs exhibited no evidence of ocular injury in comparison to the control eye. The findings revealed the competence of TRAVO-tailored LCNs in glaucoma treatment and suggested the potential application of a novel platform in ocular delivery.

Assessment of antifungal efficacy of itraconazole loaded aspasomal cream: comparative clinical study.

Topical conveyance of antifungal agents like itraconazole ITZ has been giving good grounds for expecting felicitous antifungal medicines. The defiance of topical delivery of this poorly water soluble and high-molecular-weight drug, however, mightily entail an adequate vehiculation. ITZ aspasomes, newer antioxidant generation of liposomes, have been designed and enclosed in a cream to ameliorate skin deposition. The proposed creams containing non-formulated ITZ or encapsulated in aspasomes (0.1% or 0.5%) were topically applied in patients with diagnosed diaper dermatitis complicated by candidiasis, tinea corporis (TC), and tinea versicolor (TVC). Placebos (void aspasomal cream and cream base) were also utilized. The obtained results for diaper rash revealed that aspasomal cream (0.5% ITZ) was eminent with respect to complete cure and negative candida culture after 10-day therapy relative to counterparts containing 0.1% ITZ aspasomes or non-formulated ITZ (0.1% and 0.5%). For tinea, the same trend was manifested in terms of 'cleared' clinical response in 90% of patients and absence of fungal elements after 4-week treatment. Relative to non-formulated ITZ, ITZ aspasomal cream was endorsed to be auspicious especially when ITZ concentration was lowered to half commercially available cream concentration (1%), pushing further exploitation in other dermal fungal infections.

Elaborated survey in the scope of nanocarriers engineering for boosting chemotherapy cytotoxicity: A meta-analysis study.

Cancer is the prime cause of mortality throughout the world. Although the conventional chemotherapeutic agents damage the cancerous cells, they exert prominent injury to the normal cells owing to their lack of specificity. With advances in science, many research studies have been established to boost the cytotoxic effect of the chemotherapeutic agents via innovating novel nano-formulations having different variables. In the current meta-analysis study, combined data from different research articles were gathered for the evidence-based proof of the superiority of drug loaded nanocarriers over their corresponding conventional solutions in boosting the cytotoxic effect of chemotherapy in terms of IC50 values. The meta-analysis was subdivided into three subgroups; nanoparticles versus nanofibers, surface functionalized nanocarriers versus naked ones, and protein versus non-protein-based platforms. The different subgroups interestingly showed distinct scoring outcome data paving the road for cytotoxicity enhancement of the anti-cancer drugs in an evidence-based manner.

Augmented cytotoxicity using the physical adsorption of Poloxamer 188 on allicin-loaded gelatin nanoparticles.

OBJECTIVES: The aim of this work was to study the effect of the physically adsorbed Poloxamer 188 coating polymer on the cytotoxic activity of allicin-loaded gelatin nanoparticles. METHODS: The double desolvation method was utilised to prepare the nanoparticles which were characterised for particle size (PS), polydispersity index (PDI) and zeta potential and visualised using transmission electron microscopy. The coating density of the used polymer was determined using 1H-nuclear magnetic resonance (1H-NMR); 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay was used to evaluate the cytotoxicity on HepG-2 cell lines. KEY FINDINGS: The particles were spherical possessing a PS of 714 ± 25.21 nm and a PDI of 0.663 ± 0.143. These results together with the 1H-NMR results analysis confirmed the efficient coating of Poloxamer 188. The coating of particles rendered them more cytotoxic, scoring an IC50 of 6.736 µm (2-folds lower than the uncoated counter parts and 4-folds lesser than the allicin solution), and apt for cancer-targeting. Moreover, the prepared nanoparticles were stable to gamma-sterilisation and to a storage of 12 months. CONCLUSIONS: Augmented cytotoxicity on HepG-2 cell lines was obtained using the physical adsorption of an abundant and relatively cheap material, Poloxamer 188, on allicin-loaded gelatin nanoparticles.

Uptake of microemulsion components into the stratum corneum and their molecular effects on skin barrier function.

This research determined the uptake of individual components of topically applied microemulsions into the stratum corneum (SC) and assessed their molecular effects on skin barrier function. The microemulsions comprised oleic acid, Tween20, Transcutol and water. The effects of selected formulations, and of the individual components, on the conformational order of the SC intercellular lipids, and on SC hydration, were assessed by infrared spectroscopy. Measurements were made as a function of SC depth by progressively tape-stripping the membrane in the normal way. SC uptake of microemulsion components was quantified via extraction and analysis of the collected tape strips. SC hydration increased in proportion to the water content of the microemulsion. Each of the microemulsion components penetrated into the SC, but to different extents. Oleic acid decreased the conformational order of the SC lipids, and induced some phase separation, as revealed by the frequency shifts and peak areas of the absorbances associated with -CH(2) symmetric and asymmetric stretching vibrations. Tween20 extracted some of the SC intercellular lipids. In summary, SC structure was perturbed by all components of the microemulsions, and the degree of the effects detected was proportional to the level of the respective component present in the skin.

Delineating penetration enhancer-enriched liquid crystalline nanostructures as novel platforms for improved ophthalmic delivery.

Liquid crystalline nanostructures (LCNs), for instance cubosomes, have been widely used as a promising carrier for drug delivery through the last few years. To date, the ophthalmic application of these platforms was not well explored, and the effect of integrating penetration enhancers (PEs) into LCNs has not been investigated yet. Hence, the present work aimed coupling novel PEs into glyceryl monooleate-based cubosomes for ocular administration. Various enhancers viz, free fatty acids (oleic and linoleic acids), natural terpenes (D-limonene and cineole), medium-chain triglycerides (Captex® 1000 and Captex® 8000), mono-/di-glycerides (Capmul® MCM, Capmul® PG-8, and Capmul® PG-12) were tested at different amounts. The morphology of the formed LCNs was investigated using transmission electron microscopy (TEM). The crystallinity and thermal behavior studies were also conducted. The ocular safety of optimized formulae was tested via hen's egg test-chorioallantoic membrane (HET-CAM), rabbit eye Draize test, and histopathological examinations of ocular tissues. Confocal laser scanning microscopy (CLSM) was utilized to assess the enhanced permeation of fluorescently-labeled LCNs across corneal layers. The acceptable formulations exhibited relatively homogenous particle nano-sizes ranging from 139.26 ± 3.68 to 590.56 ± 24.86 nm carrying negative surface charges. TEM images, X-ray patterns and DSC thermograms demonstrated the influential effect of PEs in developing altered crystalline structures. The ocular compatibility of optimized LCNs was confirmed. The corneal distribution using CLSM proved the disseminated fluorescence intensity of LCNs enriched with oleic acid, Captex® 8000 and Capmul® MCM. Selected LCNs showed good physical stability upon storage and lyophilization. The results demonstrated the efficiency of tailored PE-modified LCNs in enhancing the ocular transport with no evidence of any irritation potential, and hence suggested their prospective applicability in ophthalmic drug delivery.

Preparation of intravenous stealthy acyclovir nanoparticles with increased mean residence time.

A major cause of thromboplebitis, during acyclovir (ACV) parenteral administration is the high pH of its reconstituted solution (pH 11). Its plasma half life is 2.5 h, requiring repeated administration which may result in excess of drug solubility leading to possible renal damage and acute renal failure. The present study reports the efficiency of stealthy ACV nanoparticles (NPs) to increase the mean residence time of the drug 29 times. It caused a marked decrease in thrombophlebitis when injected into rabbit's ear vein. The polymers used were (Poly lactic acid, polylactic-co-glycolic (PLGA) 85/15, PLGA 75/25, PLGA 50/50). Particles were evaluated for their encapsulation efficiency, morphology, particle size and size distribution, zeta potential, and in vitro drug release. Small NPs (280-300 nm) with 60% drug release after 48 h were obtained. Among the block copolymer used, poloxamer 407 was of superior coating properties with a coat thickness in the range of 1.5-8.3 nm and a decreased surface charge.

Exploiting gelatin nanocarriers in the pulmonary delivery of methotrexate for lung cancer therapy.

Gelatin has many merits that encourage its use in the pulmonary delivery of anticancer drugs. It is a biodegradable denatured protein which possesses several functional groups that could be modified. Additionally, it has balanced hydrophilic and hydrophobic characters, which facilitate the loading of chemotherapeutic agents. Accordingly, the purpose of the current work was to exploit this valuable biomaterial in the efficient pulmonary delivery of methotrexate in case of lung cancer. Gelatin nanoparticles were prepared via a desolvation method and the fabrication process was optimized using Box Behnken design of experiment. A comparative study on uptake of gelatin nanoparticles by lung adenocarcinoma cells and macrophages was implemented using flow cytometry. Investigation of the effect of different methotrexate loading techniques: encapsulation, post loading and chemical conjugation on the nanoparticles characteristics and cellular cytotoxicity was performed. Nano-in-microparticles were prepared by co-spray drying optimized nanoparticles with leucine. Results showed that Box Behnken design was able to optimize preparation parameters to yield uniform nanoparticles with suitable particle size for cancer cells uptake. The prepared nanoparticles demonstrated a preferential uptake by lung cancer cells. Additionally, methotrexate loaded nanoparticles demonstrated up to four fold significant reduction in methotrexate IC50. The spray dried gelatin nano-in microparticles demonstrated good aerosolization properties enabling lung deposition in the respirable airways. Thus, providing a promising platform for lung cancer therapy.

Enhanced Allicin Cytotoxicity on HEPG-2 Cells Using Glycyrrhetinic Acid Surface-Decorated Gelatin Nanoparticles.

The cytotoxic potential of allicin was evaluated on different cancer cell lines, particularly, hepatic (HepG-2), breast (MCF-7), lung (A-549), and prostatic (PC-3), where allicin scored an IC50 score of 19.26 µM on HepG-2. In order to increase the cell uptake, optimized allicin-loaded gelatin nanoparticles (GNPs) were prepared where the optimum formulation was surface-conjugated to glycyrrhetinic acid. GNPs were optimized using a D-optimal design. The optimum formulation had a particle size of 370.7 ± 6.78 nm and polydispersity index of 0.0363 ± 0.009 and 39.13 ± 2.38% of drug entrapment. The conjugation of the ligand, glycyrrhetinic acid with allicin-loaded GNPs, was confirmed utilizing 1H NMR. Drug release profiles in the presence/absence of collagenase were obtained. Finally, a cytotoxicity study on HepG-2 was performed for the unconjugated and conjugated allicin-loaded GNPs scoring IC50 of 10.95 and 5.046 µM, revealing two- and fourfold enhancements in allicin cytotoxicity, respectively. To our knowledge, the ligand-carrier pair, glycyrrhetinic acid-gelatin, was not explored before, and the developed system poses a successful liver cancer therapy.

Ocular poloxamer-based ciprofloxacin hydrochloride in situ forming gels.

The purpose of this study was to develop poloxamer-based in situ gelling formulations of ciprofloxacin hydrochloride (HCl) aiming at prolonging corneal contact time, controlling drug release, enhancing ocular bioavailability, and increasing patient compliance. The in situ forming gels were prepared using different concentrations of poloxamer 407 (P407) and poloxamer 188 (P188). Mucoadhesives such as hydroxypropylmethyl cellulose (HPMC) or hydroxyethyl cellulose (HEC) were added to the formulations to enhance the gel bioadhesion properties. The prepared formulations were evaluated for their in vitro drug release, sol-gel transition temperature, rheological behavior, and mucoadhesion force. The in vivo antimicrobial efficacy of selected ciprofloxacin HCl in situ gelling formulations was studied on infected rabbit's eyes and compared with that of the marketed conventional eye drops. The gelation temperature of the prepared formulations ranged from 28.00 to 34.03 degrees C. Increasing the concentrations of P407, HPMC, and HEC increased the viscosity and mucoadhesion force of the preparations and decreased the in vitro drug release. Ciprofloxacin HCl in situ forming gel formulae composed of P407/P188/HPMC (18/13/1.5%, wt/wt), and P407/P188/HEC (18/13/0.5%, wt/wt) showed optimum release and mucoadhesion properties and improved ocular bioavailability as evidenced by an enhanced therapeutic response compared with the marketed conventional eye drops.

Lipospheres as carriers for topical delivery of aceclofenac: preparation, characterization and in vivo evaluation.

The purpose of this study was to prepare lipospheres containing aceclofenac intended for topical skin delivery with the aim of exploiting the favorable properties of this carrier system and developing a sustained release formula to overcome the side effects resulting from aceclofenac oral administration. Lipospheres were prepared using different lipid cores and phospholipid coats adopting melt and solvent techniques. Characterization was carried out through photomicroscopy, scanning electron microscopy, particle size analysis, DSC, In vitro drug release and storage study. The anti-inflammatory effect of liposphere systems was assessed by the rat paw edema technique and compared to the marketed product. Results revealed that liposphere systems were able to entrap aceclofenac at very high levels (93.1%). The particle size of liposphere systems was well suited for topical drug delivery. DSC revealed the molecular dispersion of aceclofenac when incorporated in lipospheres. Both entrapment efficiency and release were affected by the technique of preparation, core and coat types, core to coat ratio and drug loading. Lipospheres were very stable after 3 months storage at 2-8 degrees C manifested by low leakage rate (less than 7%) and no major changes in particle size. Finally, liposphere systems were found to possess superior anti-inflammatory activity compared to the marketed product in both lotion and paste consistencies. Liposphere systems proved to be a promising topical system for the delivery of aceclofenac as they possessed the ability to entrap the drug at very high levels and high stability, and to sustain the anti-inflammatory effect of the drug.

Enhanced bioavailability of metoclopramide HCl by intranasal administration of a mucoadhesive in situ gel with modulated rheological and mucociliary transport properties.

The prolonged residence of drug formulation in the nasal cavity is of utmost importance for intranasal drug delivery. The objective of the present investigation was to develop a mucoadhesive in situ gel with reduced nasal mucociliary clearance in order to improve the bioavailability of the antiemetic drug, metoclopramide hydrochloride (MCP HCl). The in situ gelation upon contact with nasal mucosa was conferred via the use of the thermogelling poloxamer 407 whereas mucoadhesion and drug release enhancement were modulated via the use of mucoadhesive and polyethylene glycol (PEG) polymers respectively. The results revealed that the different mucoadhesives augmented the gel viscosity but reduced its sol-gel transition temperatures (T(sol-gel)) and the drug release. The inclusion of PEG counteracted the effect of the mucoadhesive polymers whereby it decreased the gel consistency and increased the T(sol-gel) as well as the in vitro drug release. The formulations with favorable sol-gel transition temperatures (25-32 degrees C) and high in vitro drug release (100% release in 60 min) were also rheologically stable upon storage. The mucoadhesiveness test was performed in vivo in rats, results showed that the carbopol-containing in situ gel prolonged the mucociliary transport time from 10 min (control solution) to 52 min (mucoadhesive gel) and maintained nasal mucosal integrity after 14-days application. The bioavailability study in rabbits revealed that the absolute bioavailability of MCP HCl was significantly increased from 51.7% in case of the oral drug solution to 69.1% in case of the nasal in situ gel. The study point to the potential of mucoadhesive nasal in situ gel in terms of ease of administration, accuracy of dosing, prolonged nasal residence and improved drug bioavailability.