Surface modification of poly(hydroxybutyrate) films to control cell-matrix adhesion.

Tailoring surface properties of degradable polymer scaffolds is key to progress in various tissue engineering strategies. Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) thin films were modified by low pressure ammonia plasma, low pressure water vapour plasma, or immersion in a sodium hydroxide solution to elaborate means to control the cell-matrix adhesion of human umbilical cord vein endothelial cells grown on these materials. Fibronectin (FN) heteroexchange and cell adhesion were correlated to the physicochemical characteristics of the modified polymer surfaces which were investigated by X-ray photoelectron spectroscopy (XPS), scanning force microscopy (SFM), electrokinetic measurements, and contact angle measurements. All treatments increased the hydrophilicity of the polymer samples, which could be accounted to newly created amine or carboxyl functionalities for ammonia plasma or water vapour plasma treatments, respectively, and ester hydrolysis for treatments with alkaline aqueous solutions. Main features of cell adhesion and FN reorganisation-evaluated after 1h and after 5 days-could be attributed to the anchorage strength of pre-coated FN layers at the polymer surface, which was, in turn found to be triggered by the type of modification applied. In line with earlier studies referring to different materials cell adhesion and matrix reorganisation were shown to be sensitively controlled through the physicochemical profile of poly(hydroxybutyrate) surfaces.

Electrofiltration as a purification strategy for microbial poly-(3-hydroxybutyrate).

The biodegradable polyester poly-(3-hydroxybutyrate) (PHB), produced by Ralstonia eutropha in batch and fed-batch processes, was purified by electrofiltration. The protein film on PHB granules determines their high negative zeta potential, enabling the application of electrofiltration as an integrated technology in the downstream processing of PHB. In order to determine the optimal purification parameters, various pressure and electric field strength conditions were tested. Electrofiltration of PHB at 4bars and 4V/mm provided an up to four times higher concentration factor than conventional filtration. FT-Raman spectroscopy demonstrated that electrofiltration did not result in structural changes to the products. The study demonstrates the efficiency and practical advantages of electrofiltration as a promising downstream step in the PHB production technology.