Mechanical modulation of terahertz wave via buckled carbon nanotube sheets.

Manipulation of terahertz (THz) wave plays an important role in THz imaging, communication, and detection. The difficulty in manipulating the THz wave includes single function, untunable, and inconvenient integration. Here, we present a mechanically tunable THz polarizer by using stretchable buckled carbon nanotube sheets on natural rubber substrate (BCNTS/rubber). The transmittance and degree of polarization of THz wave can be modulated by stretching the BCNTS/rubber. The experiments showed that the degree of polarization increased from 17% to 97%, and the modulation depth reached 365% in the range of 0.2-1.2 THz, as the BCNTS/rubber was stretched from 0% to 150% strain. These changes can be also used for high strain sensing up to 150% strain, with a maximum sensitivity of 2.5 M/S. A spatial modulation of THz imaging was also realized by stretching and rotating BCNTS/rubber. The theoretical analysis and numerical modeling further confirm the BCNTS/rubber changes from weak anisotropic to highly anisotropic structure, which play key roles in THz wave modulation. This approach for active THz wave manipulation can be widely used in polarization imaging, wearable material for security, and highly sensitive strain sensing.

Oscillating light engine realized by photothermal solvent evaporation.

Continuous mechanical work output can be generated by using combustion engines and electric motors, as well as actuators, through on/off control via external stimuli. Solar energy has been used to generate electricity and heat in human daily life; however, the direct conversion of solar energy to continuous mechanical work has not been realized. In this work, a solar engine is developed using an oscillating actuator, which is realized through an alternating volume decrease of each side of a polypropylene/carbon black polymer film induced by photothermal-derived solvent evaporation. The anisotropic solvent evaporation and fast gradient diffusion in the polymer film sustains oscillating bending actuation under the illumination of divergent light. This light-driven oscillator shows excellent oscillation performance, excellent loading capability, and high energy conversion efficiency, and it can never stop with solvent supply. The oscillator can cyclically lift up a load and output work, exhibiting a maximum specific work of 30.9 × 10-5 J g-1 and a maximum specific power of 15.4 × 10-5 W g-1 under infrared light. This work can inspire the development of autonomous devices and provide a design strategy for solar engines.

Torsional refrigeration by twisted, coiled, and supercoiled fibers.

Higher-efficiency, lower-cost refrigeration is needed for both large- and small-scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatic compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural rubber, nickel titanium, and polyethylene fishing line. Using opposite chiralities of twist and coiling produces supercoiled natural rubber fibers and coiled fishing line fibers that cool when stretched. A demonstrated twist-based device for cooling flowing water provides high cooling energy and device efficiency. Mechanical calculations describe the axial and spring-index dependencies of twist-enhanced cooling and its origin in a phase transformation for polyethylene fibers.

Fabrication of Stretchable Copper Coated Carbon Nanotube Conductor for Non-Enzymatic Glucose Detection Electrode with Low Detection Limit and Selectivity.

The increasing demand for wearable glucose sensing has stimulated growing interest in stretchable electrodes. The development of the electrode materials having large stretchability, low detection limit, and good selectivity is the key component for constructing high performance wearable glucose sensors. In this work, we presented fabrication of stretchable conductor based on the copper coated carbon nanotube sheath-core fiber, and its application as non-enzymatic electrode for glucose detection with high stretchability, low detection limit, and selectivity. The sheath-core fiber was fabricated by coating copper coated carbon nanotube on a pre-stretched rubber fiber core followed by release of pre-stretch, which had a hierarchically buckled structure. It showed a small resistance change as low as 27% as strain increasing from 0% to 500% strain, and a low resistance of 0.4 Ω·cm-1 at strain of 500%. This electrode showed linear glucose concentration detection in the range between 0.05 mM and 5 mM and good selectivity against sucrose, lactic acid, uric acid, acrylic acid in phosphate buffer saline solution, and showed stable signal in high salt concentration. The limit of detection (LOD) was 0.05 mM, for the range of 0.05⁻5 mM, the sensitivity is 46 mA·M-1. This electrode can withstand large strain of up to 60% with negligible influence on its performance.