RESUMO
PURPOSE: The use of escalated radiation doses to improve local control in conformal radiotherapy of prostatic cancer is becoming the focus of many centers. There are, however, increased side effects associated with increased radiotherapy doses that are believed to be dependent on the volume of normal tissue irradiated. For this reason, accurate patient positioning, CT planning with 3D reconstruction of volumes of interest, clear definition of treatment margins and verification of treatment fields are necessary components of the quality control for these procedures. In this study electronic portal images are used to (a) evaluate the magnitude and effect of the setup errors encountered in patient positioning techniques, and (b) verify the multileaf collimator (MLC) field patterns for each of the treatment fields. METHODS AND MATERIALS: The Phase I volume, with a planning target volume (PTV) composed of the gross tumour volume (GTV) plus a 1.5 cm margin is treated conformally with a three-field plan (usually an anterior field and two lateral or oblique fields). A Phase II, with no margin around the GTV, is treated using two lateral and four oblique fields. Portal images are acquired and compared to digitally reconstructed radiographs (DRR) and/or simulator films during Phase I to assess the systematic (CT planning or simulator to treatment error) and the daily random errors. The match results from these images are used to correct for the systematic errors, if necessary, and to monitor the time trends and effectiveness of patient imobilization systems used during the Phase I treatment course. For the Phase II, portal images of an anterior and lateral field (larger than the treatment fields) matched to DRRs (or simulator images) are used to verify the isocenter position 1 week before start of Phase II. The Portal images are acquired for all the treatment fields on the first day to verify the MLC field patterns and archived for records. The final distribution of the setup errors was used to calculate modified dose-volume histograms (DVHs). This procedure was carried out on 36 prostate cancer patients, 12 with vacuum-molded (VacFix) bags for immobilization and 24 with no immobilization. RESULTS: The systematic errors can be visualized and corrected for before the doses are increased above the conventional levels. The requirement for correction of these errors (e.g., 2.5 mm AP shift) was demonstrated, using DVHs, in the observed 10% increase in rectal volume receiving at least 60 Gy. The random (daily) errors observed showed the need for patient fixation devices when treating with reduced margins. The percentage of fields with displacements of < or = 5.0 mm increased from 82 to 96% with the use of VacFix bags. The rotation of the pelvis is also minimized when the bags are used, with over 95% of the fields with rotations of < or = 2.0 degrees compared to 85% without. Currently, a combination of VacFix and thermoplastic casts is being investigated. CONCLUSION: The systematic errors can easily be identified and corrected for in the early stages of the Phase I treatment course. The time trends observed during the course of Phase I in conjunction with the isocenter verification at the start of Phase II give good prediction of the accuracy of the setup during Phase II, where visibility of identifiable structures is reduced in the small fields. The acquisition and inspection of the portal images for the small Phase I fields has been found to be an effective way of keeping a record of the MLC field patterns used. Incorporation of the distribution of the setup errors into the planning system also gives a clearer picture of how the prescribed dose was delivered. This information can be useful in dose-escalation studies in determining the relationship between the local control or morbidity rates and prescribed dose.
Assuntos
Neoplasias da Próstata/radioterapia , Planejamento da Radioterapia Assistida por Computador/métodos , Humanos , Masculino , Fenômenos Físicos , Física , Postura , Neoplasias da Próstata/diagnóstico por imagem , Radiografia , Dosagem RadioterapêuticaRESUMO
Stereotactically-guided conformal radiotherapy is a practical technique for irradiating irregular lesions in the brain. The shaping of the conformal fields may be achieved using lead alloy blocks, a conventional multi-leaf collimator (MLC) or a mini/micro-MLC. Although the former gives more precise shaping, it is labour intensive. The latter methods are more practical as both mould room and treatment room times are reduced, but the shaping is limited by the finite leaf-width. This study compares treatment plans, in terms of normal tissue doses and tumour coverage, for fields shaped using conformal blocks and a conventional MLC in two series of geometrical shapes and nine patient tumours. For the range of tumour sizes considered (volumes 14-264 cm3, minimum dimension 30 mm, maximum 102 mm), the MLC treats, on average, 14% (range 3-34%) and 17% (range 0-36%) more normal brain tissue than conformal blocks to >50% and >80% of the prescription dose, respectively. The large variability is due to strong dependence on tumour shape and the presence of partial leaf-widths in the MLC fit. It is therefore important to consider both of these effects when deciding whether the MLC is appropriate for a particular target volume.
Assuntos
Neoplasias Encefálicas/cirurgia , Planejamento da Radioterapia Assistida por Computador/métodos , Radioterapia Conformacional/métodos , Densitometria , Glioma/cirurgia , Humanos , Meningioma/cirurgia , Aceleradores de Partículas , Radiometria , Radiocirurgia/instrumentação , Radiocirurgia/métodos , Planejamento da Radioterapia Assistida por Computador/instrumentação , Radioterapia Conformacional/instrumentação , Tomógrafos ComputadorizadosRESUMO
A quick, simple set of tests has been devised to assess and record the quality assurance aspects of the Varian multi-leaf collimator (MLC) when used for clinical treatments on a regular basis. Pre-treatment, daily and weekly checks are performed by the radiographers while more detailed quality assurance is carried out at monthly and quarterly intervals by physicists.
Assuntos
Aceleradores de Partículas/normas , Simulação por Computador , Documentação , Desenho de Equipamento , Dosimetria Fotográfica , Humanos , Garantia da Qualidade dos Cuidados de Saúde , Controle de Qualidade , Doses de Radiação , Proteção Radiológica , Registros , Reprodutibilidade dos TestesRESUMO
Continued use of basic planning and treatment techniques, in contrast to the improved methods implemented at many other anatomical sites, has emphasized the need for improved breast dosimetry. Any future technique delivering a superior three-dimensional dose distribution will be of maximum benefit if set-up errors are minimized. To determine the influence of vacuum moulded bag (vac-fix) immobilization on routine breast radiotherapy, 17 patients received half their radiotherapy fractions using our standard breast board technique and half using a vac-fix device positioned on the breast board. Treatment accuracy and reproducibility were assessed for each technique using daily electronic portal imaging and were analysed in terms of random and systematic translational and rotational displacements of treatment fields with respect to corresponding simulation images. In addition, patients completed a short questionnaire aimed at determining which technique they preferred. Results showed that random errors for the two techniques did not differ significantly. Approximately 80% of random translations recorded were less than 3 mm and 80% of random rotations were less than 1.5 degrees. Systematic errors showed some improvement with the vac-fix system. In the anteroposterior direction, approximately 80% of systematic errors were less than 4 mm for both techniques, but in the superoinferior direction the 80% point was reduced from 5.0 mm for the standard set-up to 2.7 mm for treatment in vac-fix. For rotational systematic errors, the corresponding value dropped from 1.8 degrees for the standard set-up to 1.1 degrees in vac-fix. Therefore, for many patients, additional use of a vac-fix device improved the transfer of the planned set-up from simulator to treatment unit. Additionally, answers to the questionnaire indicated that patients generally favoured the vac-fix system over use of the breast board alone. In conclusion, however, introduction of vac-fix immobilization for all patients was not thought justified as the improvements demonstrated are not likely to be clinically significant with the present treatment technique.
Assuntos
Neoplasias da Mama/radioterapia , Imobilização , Neoplasias da Mama/cirurgia , Fracionamento da Dose de Radiação , Feminino , Humanos , Satisfação do Paciente , Radioterapia Adjuvante/instrumentação , Reprodutibilidade dos TestesRESUMO
Dynamic intensity modulated radiation therapy (IMRT) to treat prostate and pelvic nodes using the Varian 120-leaf Millennium multileaf collimator (MLC) has been implemented in our clinic. This paper describes the procedures that have been undertaken to achieve this, including some of the commissioning aspects of Helios, verification of the dynamic dose delivery, and quality assurance (QA) of the dose delivered to the patient. Commissioning of Helios included measurements of transmission through the 120-leaf MLC, which were found to be 1.7% for 6 mV and 1.8% for 10 MV. The rounded leaf edge effect, known as the dosimetric separation, was also determined using two independent methods. Values of 1.05 and 1.65 mm were obtained for 6 and 10 MV beams. Five test patients were planned for prostate and pelvic node irradiation to 70 and 50 Gy, respectively. Dose and fluence verification were carried out on specially designed phantoms and dose points in the prostate were measured to be within 2.0% (mean 0.9%, s.d. 0.6%) of the calculated dose and in the nodes within 3.0% (mean 1.6%, s.d. 1.1%). Following the results of this commissioning and implementation study, we have started to treat men with a target Volume including the prostate and pelvic nodes using Helios optimized dynamic IMRT delivery in a dose escalation protocol.