Intrathecal baclofen efficacy for managing motor function and spasticity severity in patients with cerebral palsy: a systematic review and meta-analysis.

BACKGROUND: Spasticity can significantly affect a patient's quality of life, caregiver satisfaction, and the financial burden on the healthcare system. Baclofen is one of only a few options for treating spasticity. The purpose of this study is to investigate the impact of intrathecal baclofen (ITB) therapy on severe40.23 spasticity and motor function in patients with cerebral palsy. METHODS: We conducted a systematic review in PubMed, Scopus, Ovid, and the Cochrane Library in accordance with the PRISMA guidelines. We included studies based on eligibility criteria that included desired participants (cerebral palsy patients with spasticity), interventions (intrathecal baclofen), and outcomes (the Ashworth scales and the Gross Motor Function Measure [GMFM]). The within-group Cohen's d standardized mean differences (SMD) were analyzed using the random effect model. RESULTS: We screened 768 papers and included 19 in the severity of spasticity section and 6 in the motor function section. The pre-intervention average spasticity score (SD) was 3.2 (0.78), and the post-intervention average score (SD) was 1.9 (0.72), showing a 40.25% reduction. The SMD for spasticity reduction was - 1.7000 (95% CI [-2.1546; -1.2454], p-value < 0.0001), involving 343 patients with a weighted average age of 15.78 years and a weighted average baclofen dose of 289 µg/day. The SMD for the MAS and Ashworth Scale subgroups were - 1.7845 (95% CI [-2.8704; -0.6986]) and - 1.4837 (95% CI [-1.8585; -1.1088]), respectively. We found no relationship between the participants' mean age, baclofen dose, measurement time, and the results. The pre-intervention average GMFM (SD) was 40.03 (26.01), and the post-intervention average score (SD) was 43.88 (26.18), showing a 9.62% increase. The SMD for motor function using GMFM was 0.1503 (95% CI [0.0784; 0.2223], p-value = 0.0030), involving 117 patients with a weighted average age of 13.63 and a weighted average baclofen dose of 203 µg/day. In 501 ITB implantations, 203 medical complications were reported, including six new-onset seizures (2.96% of medical complications), seven increased seizure frequency (3.45%), 33 infections (16.26%), eight meningitis (3.94%), and 16 cerebrospinal fluid leaks (7.88%). Delivery system complications, including 75 catheter and pump complications, were also reported. CONCLUSION: Despite the risk of complications, ITB has a significant impact on the reduction of spasticity. A small but statistically significant improvement in motor function was also noted in a group of patients.

Effect of geometrical design variables on implantation configuration and fixation stiffness of titling bone anchors: A parametric finite element study.

The mechanical interaction of a tilting anchor and cancellous bones of various densities was simulated using finite element modeling. The model enjoyed a sophisticated representation of the bone, as an elasto-plastic material with large deformation capability. The anchor's tilting action during implantation phase, as well as its fixation stiffness during pull-out test, were predicted by the model and a parametric study was performed to investigate the effects of the anchor's distal width and corner fillet radius, on these measures. The model predictions were validated against the results of an experimental test on ovine humerus specimens. The model could reasonably reproduce the tilting action of the anchor during the implantation phase. Comparison of the model predictions with the experimental results revealed similar trends during both the implantation and the pull-out phases, but smaller displacement magnitudes (end points: 1.4 vs. 2.1 mm and 4.6 vs. 5.2 mm, respectively). The results of the parametric study indicated substantial increase in the fixation stiffness with increasing bone density. Reducing the distal width and increasing the fillet radius improved the anchor's implantation configuration and fixation stiffness in low-density bones. For high-density bone applications, however, a larger distal width was favored for improving the fixation stiffness.

Surgical treatment of a nonunion following clavicle osteotomy in a child with a history of Erb's palsy: A case report.

INTRODUCTION AND IMPORTANCE: Erb's palsy defined as muscle weakness and loss of motion caused by a nerve condition in the shoulder and arm. Children with Erb's palsy might underwent clavicle osteotomy as an appropriate surgical treatment method. However, few number of these patients who underwent clavicle osteotomy experienced nonunion and complained of shoulder deformity and pain. The aim of the present case report was to present new surgical treatment of a nonunion following clavicle osteotomy in a child affected by Erb's palsy. CASE PRESENTATION: A six years old boy with a history of Erb's palsy who underwent clavicle osteotomy at age of 6 months was referred to hospital. There was a nonunion following clavicle osteotomy. The patient had right shoulder deformity and complained of its-related pain. To correct a nonunion following clavicle osteotomy in this case, middle third fibula auto grafting and fixing it to the cite of clavicle nonunion by pins was used. After five months of follow-up, a clavicle nonunion and shoulder deformity was thoroughly corrected. CLINICAL DISCUSSION: As clavicle osteotomy, the most commonly surgical method for Erb's palsy, has been demonstrated to not work effectively and cause nonunion in some cases, a new surgical method for correcting clavicle nonunion other than repeated clavicle osteotomy is needed. In the present case report, fibula auto grafting and fixing it to the cite of clavicle nonunion by pins was applied and demonstrated remarkable improvement. CONCLUSION: Totally, use of fibula auto grafting and fixing it to the cite of clavicle nonunion by pins might be an effective surgical treatment for such cases.

Distal femoral osteotomy and patellar tendon advancement for the treatment of crouch gait in patients with bilateral spastic cerebral palsy.

BACKGROUND: Crouch gait, or flexed knee gait, represents a common gait pattern in patients with spastic bilateral cerebral palsy (CP). Distal femoral extension and/or shortening osteotomy (DFEO/DFSO) and patellar tendon advancement (PTA) can be considered as viable options when knee flexion contractures are involved. Better outcomes have been reported after a combination of both, independently of the presence of knee extensor lag. In this study, we evaluated the clinical and kinematic outcomes of these procedures. PATIENTS AND METHODS: We reviewed a cohort of 52 limbs (28 patients) who were treated for crouch gait by DFEO/DFSO alone (group 1, n = 15) or DFEO/DFSO + PTA (group 2, n = 37) as a part of single event multilevel surgery (SEMLS). The mean age at surgery was 14 years, and the mean follow-up time was 18 months. The physical examination data and three-dimensional standardized gait analysis were collected and analyzed before the surgery and postoperatively. RESULTS: Overall knee range of motion improved in all limbs. The knee flexion decreased significantly in both groups at initial, mid, and terminal stance. Hip flexion significantly decreased in mid-stance for limbs in group 2. Both clinical and gait parameters were most improved in limbs who underwent DFEO/DFSO + PTA. Increased pelvic tilt was observed in both groups after surgery. CONCLUSION: Although DFEO/DFSO alone was successful in correcting knee flexion contractures, PTA has helped to improve knee extensor lag and knee extension during gait. LEVEL OF EVIDENCE: Therapeutic level IV.

Cadaveric biomechanical assessment of different configurations for a novel pin and plate fixation method in distal humerus fractures.

Use of dual pre-contoured plates has been accepted as the treatment of choice in distal humerus fractures despite challenges especially in very distal or highly fragmented fractures. Aiming to improve results in such instances, our newly proposed method uses several K-wires fixated by a small reconstruction plate. Drawing on the results of previous finite element studies, the current study aims to compare the stiffness of three clinically common variations of this method using biomechanical testing in cadaveric humeri. 24 samples were divided into three groups and fractures were simulated. Groups I and II used 1.5 mm K-wires in differing configurations while 2 mm wires were used in group III. All samples underwent compression, anterior and posterior bending, and torsional testing as well as failure testing. Our results indicated that Group III had significantly higher stiffness in flexion, extension, and torsion (p < 0.05). In failure, group III had the highest mean stiffness in anterior bending and torsion (861.2 N, 30.9 Nm). Based on previous and current results, this new Persian fixation method, especially when implemented using 2 mm K-wires, shows promise in achieving suitable stability and may be useful as an alternative approach in complex distal humerus fractures.

Proximal femoral varus osteotomy for Legg-Calvé-Perthes disease: Do age and lateral pillar classifications influence short-to-mid-term clinical and radiological outcomes?

INTRODUCTION: Proximal femoral varus osteotomy (FVO) is one of the most used treatment methods with acceptable outcomes for Legg-Calvé-Perthes disease (LCPD). We aimed to investigate the influence of age at disease onset and the Lateral Pillar classification on clinical and radiological outcomes of FVO surgery LCPD patients between 6-12years of age. HYPOTHESIS: Proximal FVO surgery in the early fragmentation phase of LCPD patients led to acceptable clinical and radiographic outcomes in a 3-year follow-up, regardless of preoperative age and Herring type. MATERIAL AND METHODS: Fifty patients with LCPD (Herring groups B, B/C, and C) who underwent FVO were retrospectively reviewed. We evaluated radiological [center-edge angle, extrusion index, epiphyseal index, acetabular index, articulo-trochanteric distance (ATD)] and clinical [hip abduction range of motion (ROM), Trendelenburg sign, pain, and Harris hip score (HHS)] outcomes with a follow-up of 37.3±10.5months (range: 24-180months). Finally, the overall treatment outcome was assessed using the Stulberg classification. RESULTS: The ROC curve analysis did not reveal any significant relationship between age and clinical or radiological outcomes, and there was no predictable age cut-off for surgical outcomes (p=0.13). No significant difference was found in Stulberg classification at the follow-up between patients with type B, B/C, and C of the lateral pillar (p>0.05). DISCUSSION: Our results demonstrated that open-wedge proximal FVO surgery in the early fragmentation phase of LCPD patients led to acceptable clinical and radiographic outcomes in a 3-year follow-up. Each sample of our study was very small and a lot of variables were measured, making this result not adequately strong enough to draw a robust conclusion. However, FVO surgery remains a possible suggestion for patients in the early fragmentation phase, and age and lateral pillar type may not be limiting factors. LEVEL OF EVIDENCE: IV; therapeutic retrospective cohort.

An additively manufactured titanium tilting suture anchor: a biomechanical assessment on human and ovine bone specimens.

Introduction: A novel titanium tilting suture anchor was designed and fabricated using additive manufacturing. The anchor enjoyed a nonsymmetrical structure to facilitate its insertion procedure through a weight-induced tilt, a saw-teeth penetrating edge to provide a strong initial fixation into cancellous bones of various densities, and an appropriate surface texture to enhance the longterm fixation strength through bone ingrowth. Methods: Biomechanical tests were performed on 10 ovine and 10 human cadaveric humeri to examine the insertion procedure and assess the initial fixation strength of the anchor, in comparison with a standard screw-type anchor as control. Results: This study indicated a simple yet reliable insertion procedure for the tilting anchor. All anchors survived after 400 cycles of cyclic loadings and failed in the load-to-failure step. There were no significant differences between the displacements and fixation stiffnesses of the anchors in either group. The ultimate failure load was significantly smaller (p<0.05) for tilting anchors in ovine group (273.7 ± 129.72 N vs. 375.6 ± 106.36 N), but not different in human group (311.8 ± 82.55 N vs. 281.9 ± 88.35). Also, a larger number of tilting anchors were pulled out in ovine group (6 vs. 3) but a smaller number in human group (4 vs. 6). Conclusion: It was concluded that the biomechanical performance of the designed tilting anchor is comparable with that of the standard screw-type anchors.