Alterations of posterior pharyngeal wall movement during swallowing in postoperative tongue cancer patients: assessment with a videofluoroscopic swallowing study.

This study aimed to determine the association between the progressive contraction of the posterior pharyngeal wall and dysphagia in postoperative patients with tongue cancer. A videofluoroscopic swallowing study (VFSS) was performed in 34 patients after tongue cancer surgery. Images were analyzed using a two-dimensional video measurement software. Cases in which the processes on the posterior pharyngeal wall moved downward from the 2nd to 4th vertebral regions were defined as "normal type", other cases were defined as "abnormal type". Twenty-four patients showed normal movement of the posterior pharyngeal wall, whereas 10 patients showed the abnormal type. The results showed that there was a significant difference in dysphagia scores between the postoperative swallowing type and swallowing dysfunction score. This implies that dysphagia is related to the movement of the posterior pharyngeal wall after tongue cancer surgery. Furthermore, the extent of resection and stage were significantly different between the normal and abnormal groups in the posterior pharyngeal wall movement. There was also a significant difference between the two groups in terms of the following: whether the tongue base was included in the excision range (p < 0.01), whether neck dissection was performed (p < 0.01), or whether reconstruction was not performed (p < 0.01). VFSS results showed that posterior pharyngeal wall movement was altered after surgery in patients with tongue cancer who had severe dysphagia.

Unusual imaging appearance of cemental tear in the maxillary first molar on cone-beam computed tomography: A case report.

A cemental tear (CeT) is a definitive clinical entity and its radiographic appearance is well known in single-rooted teeth. However, the imaging features of CeT in multi-rooted teeth have not been clarified. We report a case of CeT which arose in the maxillary first molar and exhibited an unusual appearance in cone-beam computed tomography images. The torn structure was verified as cementum by micro-computed tomography and histological analysis. The hypercementosis, most likely induced by occlusal force, might have been torn from the root by a stronger occlusal force caused by the mandibular implant. An unusual bridging structure was created between the two buccal roots. These features may occur in multi-rooted teeth with long-standing deep pockets and abscesses that are resistant to treatment.

Differences in the panoramic appearance of cleft alveolus patients with or without a cleft palate.

Purpose: The purpose of this study was to clarify the panoramic image differences of cleft alveolus patients with or without a cleft palate, with emphases on the visibility of the line formed by the junction between the nasal septum and nasal floor (the upper line) and the appearances of the maxillary lateral incisor. Materials and Methods: Panoramic radiographs of 238 patients with cleft alveolus were analyzed for the visibility of the upper line, including clear, obscure or invisible, and the appearances of the maxillary lateral incisor, regarding congenital absence, incomplete growth, delayed eruption and medial inclination. Differences in the distribution ratio of these visibility and appearances were verified between the patients with and without a cleft palate using the chi-square test. Results: There was a significant difference in the visibility distribution of the upper line between the patients with and without a cleft palate (p<0.05). In most of the patients with a cleft palate, the upper line was not observed. In the unilateral cleft alveolus patients, the medial inclination of the maxillary lateral incisor was more frequently observed in patients with a cleft palate than in patients without a cleft palate. Conclusion: Two differences were identified in panoramic appearances. The first was the disappearance (invisible appearance) of the upper line in patients with a cleft palate, and the second was a change in the medial inclination on the affected side maxillary lateral incisor in unilateral cleft alveolus patients with a cleft palate.

Spread asymmetry to differentiate nasopalatine duct cysts from radicular cysts arising in the anterior maxilla on computed tomographic images.

OBJECTIVE: The aim of this study was to clarify numerical values for differentiating nasopalatine duct cysts (NPDCs) from radicular cysts (RCs) arising in the anterior maxilla on computed tomography (CT) or cone-beam CT (CBCT) images. METHODS: CT or CBCT images of histologically proven NPDCs (n = 30) and RCs (n = 33) beyond the midline of the maxilla were investigated to determine two asymmetry indices on axial images of the maximum lesion area. The lateral asymmetry index was calculated based on two distances from each of the lateral ends of the lesion to the midsagittal plane. The index was defined as the difference between the two distances divided by their sum. The labio-palatal asymmetry index was determined by the distance between the labial and palatal ends of the lesion and the coronal plane passing through the central incisor root apex. The performance of these indices was assessed by receiver operating characteristic (ROC) analysis. The cutoff values for differentiating NPDCs from RCs were determined with the Youden procedure on the ROC curve. RESULTS: The area under the ROC curve was 0.97 for the lateral asymmetry index and 0.88 for the labio-palatal asymmetry index. The cutoff values for differentiation were 0.36 and 0.68 for the lateral and labio-palatal asymmetry indices, respectively. CONCLUSION: The lateral asymmetry index appeared to be an effective reference for differentiating NPDCs from RCs on CT or CBCT images. When the index was less than the cutoff value, a diagnosis of NPDC was strongly suggested.

Metal artifacts from posterior mandibular implants as seen in CBCT.

PURPOSE: Metal artifacts from dental implants have not been clarified in cone-beam computed tomography (CBCT) images in previous studies. Hence, only mesiodistal metal artifacts from dental implants in the posterior mandibular region were assessed using CBCT. MATERIALS AND METHODS: Twenty-two patients with a total of 61 dental implants in posterior mandibular sites were enrolled. The pixel values surrounding dental implants were measured using CBCT and rotational panoramic radiography, and then the means were calculated. RESULTS: The mean pixel values between dental implants, between dental implants and neighboring teeth, and posterior to dental implants were significantly lower than between neighboring teeth in CBCT. In addition, the mean pixel value between dental implants did not significantly differ from that between neighboring teeth in rotational panoramic radiography. CONCLUSIONS: It was concluded that mesiodistal metal artifacts surrounding dental implants are demonstrated on CBCT.

Labial bone assessment surrounding dental implant using cone-beam computed tomography: an in vitro study.

OBJECTIVE: Stable esthetic restoration is required for anterior dental implants, assessed over a long-term follow-up. Cross-sectional images obtained using cone-beam computed tomography (CBCT) allow visualization of the bucco-lingual bone surrounding dental implants; however, the thin labial bone surrounding anterior dental implants is unclear. So, the minimum labial bone thickness surrounding dental implants detected using CBCT images was estimated in the present in vitro study. MATERIALS AND METHODS: One dry mandible with five aluminum steps and a titanium rod for simulation of the thin labial bone and dental implant were used. CBCT was performed three times using three exposure volumes, and voxel values of each aluminum step were plotted. Then, the maximum voxel value in each aluminum step as a percentage of that of the 1-mm-thick aluminum step was calculated. RESULTS: The rates for the 0.6-mm-thick aluminum step with a 51- and 102-mm-diameter exposure volume were approximately 50% or greater. CONCLUSIONS: When labial bone surrounding the dental implant was approximately 0.6 mm or greater, it was suggested that it might be visually detectable using CBCT images with a 51- and 102-mm-diameter exposure volume.

Multiple assessment of molars with hypercementosis lost due to periodontitis using X-ray micro-computed tomography, electron microprobe analysis, and histological sections.

This article aimed to achieve a better understanding of cementum hyperplasia in the maxillary second molars lost due to periodontitis. Six maxillary second molars with hypercementosis were measured for the mineral concentration using micro-computed tomography and calcium element distributions using electron microprobe analysis. Calcium was distributed throughout the cementum, although the mineral concentration differed based on the cementum depth. The hyperplastic cementum was of the extrinsic fiber-rich cellular mixed stratified type. These results have implications for future studies aiming to diagnose hypercementosis. Further studies are needed to investigate the composition of the cementum matrix.

Demonstration of the accessory mental foramen using rotational panoramic radiography compared with cone-beam computed tomography.

OBJECTIVE: Rotational panoramic radiography is routinely used in dental practice. It has not been clarified, however, whether an accessory mental foramen can be demonstrated using this technique. The visibility of accessory mental foramina on rotational panoramic radiographs was compared with those on para-panoramic images reconstructed from cone-beam computed tomographic (CBCT) images. MATERIALS AND METHODS: A total of 365 patients (130 males and 235 females) were retrospectively analyzed. Para-panoramic images were reconstructed from CBCT images with the accessory mental foramen/foramina using three-dimensional visualization and measurement software, and then the accessory mental foramen on rotational panoramic images was compared with that on para-panoramic images. RESULTS: A total of 37 accessory mental foramina were observed in 28 patients on CBCT images. The rate of being able to visualize the accessory mental foramen or bony canal between the point of bifurcation from the mandibular canal and the accessory mental foramen on rotational panoramic radiographs was 48.6% (18 of 37 accessory mental foramina). CONCLUSION: Approximately half of the accessory mental foramina-positive CBCT images demonstrated the accessory mental foramen, or bony canal between the point of bifurcation from the mandibular canal and accessory mental foramen on rotational panoramic radiographs.

Clinical assessment of cemento-osseous dysplasia based on three-dimensional diagnostic imaging: A case report.

Cemento-osseous dysplasia (COD) is a lesion in which periapical bone is replaced by fibrous tissue, including osseous or cementum-like tissue. In the initial stage of COD, radiolucencies are noted at the root apex on periapical radiography, which can be confused with apical periodontitis. Understanding of correct pathological condition and careful assessment of COD is critical to avoid unnecessary endodontic interventions in healthy teeth. This report describes the ability and usefulness of cone-beam computed tomography (CBCT) and multi-slice computed tomography (MSCT) to detect COD. The findings in this case suggest that MSCT is more appropriate than CBCT, especially for patients with early- to middle-stage COD. However, the radiation dose is higher in MSCT than in CBCT; the application of MSCT should be limited to assessment of whether treatment or surgical management is necessary.

Preliminary Study on the Diagnostic Performance of a Deep Learning System for Submandibular Gland Inflammation Using Ultrasonography Images.

This study was performed to evaluate the diagnostic performance of deep learning systems using ultrasonography (USG) images of the submandibular glands (SMGs) in three different conditions: obstructive sialoadenitis, Sjögren's syndrome (SjS), and normal glands. Fifty USG images with a confirmed diagnosis of obstructive sialoadenitis, 50 USG images with a confirmed diagnosis of SjS, and 50 USG images with no SMG abnormalities were included in the study. The training group comprised 40 obstructive sialoadenitis images, 40 SjS images, and 40 control images, and the test group comprised 10 obstructive sialoadenitis images, 10 SjS images, and 10 control images for deep learning analysis. The performance of the deep learning system was calculated and compared between two experienced radiologists. The sensitivity of the deep learning system in the obstructive sialoadenitis group, SjS group, and control group was 55.0%, 83.0%, and 73.0%, respectively, and the total accuracy was 70.3%. The sensitivity of the two radiologists was 64.0%, 72.0%, and 86.0%, respectively, and the total accuracy was 74.0%. This study revealed that the deep learning system was more sensitive than experienced radiologists in diagnosing SjS in USG images of two case groups and a group of healthy subjects in inflammation of SMGs.

A rare case of hyperostosis frontalis interna in an 86-year-old Japanese female cadaver.

Hyperostosis frontalis interna (HFI) is a condition characterized by abnormal bone outgrowth on the inner surface of the frontal bone. Most HFI cases occur in post-menopausal elderly women. The pathology of HFI development is uncertain. The estimated incidence of HFI ranges from 5 to 12% in Western countries, but few cases have been reported in the Japanese population. Here, we report a case of HFI in an 86-year-old Japanese female cadaver. Macroscopically, the internal surface of the frontal bone exhibited bilateral nodular protrusion with sparing of the midline, while the external surface was normal. According to the morphological classification of HFI proposed by Hershkovitz et al. this case belongs to type D, the most severe type. Using computed tomography (CT), we defined five layers, designated as I-V from the inner to the outer layer, in the nodular region of HFI; however, the normal frontal bone is composed of three layers. Histological results demonstrated that layers I, III, and V consisted of the cortical bone, and layers II and IV consisted of the trabecular bone. We also observed increases in the numbers of lamellar bone and blood vessels on the dural side of layer I, indicating increased vascularization and active osteogenesis. These results indicate that layer II represents a new diploe within the inner table, which split into layers I and III, suggesting that diploization within the inner table by activated remodeling may be involved in the development of hyperostosis in this case.

Automatic measurement of mandibular cortical bone width on cone-beam computed tomography images.

OBJECTIVE: The computed tomography cortical index (CTCI), computed tomography mandibular index (CTMI), and computed tomography index (inferior) [CTI(I)] are indexes obtained from cone-beam computed tomography images for the assessment of the mandibular cortex quality for implant planning or osteoporosis. However, cross-sectional image reconstruction for the measurements is labor-intensive. This study aimed to develop and evaluate a method to automatically reconstruct cross-sectional images and measure the cortex width in all areas inferior to the mental foramen (MF). METHODS: Seventy-one women (mean age: 52.4 years; range: 20-78 years) were enrolled. They were divided into four age and CTCI groups, including females younger (FY) and females older (FO) than 50 years (C1: normal, C2: mild/moderate erosion, and C3: severe porosity). Automatic and manual measurements of CTMI and CTI(I) were compared, and the inter- and intraobserver agreements were assessed using the intraclass correlation coefficient (ICC). The relationships between CTMI or CTI(I) and CTCI were also assessed. RESULTS: The mean processing times for reconstruction and measurements were 31.9 s and 1.22 s, respectively. ICCs for the comparison of automatic and manual measurements were 0.932 and 0.993 in the C1 and C2/C3 groups, respectively. Significant differences in CTMI and CTI(I) were observed between the FY or the FO-C1 and FO-C3 groups (p < 0.05). CONCLUSION: The automatic and manual measurements showed a strong agreement. The new method could drastically reduce routine clinical workload. Additionally, our method enables the measurement of the cortex width in all the mandibular bones inferior to the MF.

Computed tomographic features of synovial chondromatosis of the temporomandibular joint with a few small calcified loose bodies.

OBJECTIVES: The present study aimed to clarify the characteristic computed tomography (CT) features that indicate synovial chondromatosis (SC) with a few small calcified bodies or without calcification on panoramic images, and to discuss their differences from the features of temporomandibular disorder (TMD). METHODS: Panoramic and CT images from 11 patients with histologically verified SC of the temporomandibular joint were investigated. Based on the panoramic images, the patients were classified into a distinct group (5 patients) with typical features of calcified loose bodies and an indistinct group (6 patients) without such bodies. On the CT images, findings for high-density structures suggesting calcified loose bodies, joint space widening, and bony changes in the articular eminence and glenoid fossa (eminence/fossa) and condyle were analyzed. RESULTS: All 5 distinct group patients showed high-density structures on CT images, while 2 of 6 indistinct group patients showed no high-density structures even on soft-tissue window CT images. A significant difference was found for the joint space distance between the affected and unaffected sides. A low-density area relative to the surrounding muscles, suggesting joint space widening, was observed on the affected side in 2 indistinct group patients. All 11 patients regardless of distinct or indistinct classification showed bony changes in the eminence/fossa with predominant findings of extended sclerosis and erosion. CONCLUSION: Eminence/fossa osseous changes including extended sclerosis and erosion may be effective CT features for differentiating SC from TMD even when calcified loose bodies cannot be identified.

Prospective study to estimate mandibular cancellous bone density using large-volume cone-beam computed tomography.

OBJECTIVE: Because pixel or voxel values obtained from cone-beam computed tomography (CBCT) images are not absolute values, the bone density cannot be evaluated. Hence, the regression line between voxel values of CBCT and the bone mineral density (BMDs) of multislice CT (MSCT) was prospectively evaluated to investigate the mandibular cancellous bone density. Also, the usefulness of a reference bone block was evaluated on assessing a low mandibular bone density. MATERIALS AND METHODS: A total of 15 (two males and 13 females) patients who had undergone postoperative imaging for mandibular dental implant treatment with a bone graft using CBCT and MSCT were enrolled in this investigation. Voxel values of region of interests in CBCT were transformed to BMDs using a regression line from a previous study, and differences between BMDs obtained using CBCT and MSCT were calculated. Also, the voxel values of CBCT at the selected sites, in which the bone density was measured between 100 and 300 mg/cm(3) of hydroxyapatite (HA) in MSCT, were assessed regarding whether they were higher or lower than the BMD of the reference bone block. RESULTS: The mean overall difference was 38 mg/cm(3) of HA. Thirty-eight of the 45 sites (84%) were accurately assessed using the reference bone block. CONCLUSION: The usefulness of a regression line for BMD estimation in CBCT was prospectively confirmed in mandibular cancellous bone. Also, the reference bone block was useful to assess the low bone density of mandibular cancellous bone on CBCT with a large volume.

Morphometric analysis of mandibular trabecular bone using cone beam computed tomography: an in vitro study.

PURPOSE: Recently, cone beam computed tomography (CBCT) was developed and applied to presurgical imaging for dental implant treatment. Because the values obtained from CBCT images are not absolute values, unlike the Hounsfield units obtained by medical CT, the relationship between the values of trabecular bone morphometry obtained in small-volume CBCT images and CT values obtained from multislice CT was evaluated in an in vitro study. MATERIALS AND METHODS: Small-volume CBCT and multislice CT were performed in the posterior mandible. Subsequently, morphometric analysis of the trabecular bone in CBCT images was performed using three-dimensional bone morphometry software, and the correlations between the trabecular bone volume per total tissue volume (BV/TV) obtained using CBCT images and CT values generated from multislice CT images were analyzed. RESULTS: BV/TV ranged from 3.1% to 42.7%, with a mean of 20.4% (SD: 11.4) when the setting was 0.5 for the threshold. The correlations between BV/TV using the threshold values ranged from 0.3 to 0.7, and CT values showed a high level of correlation (range: 0.83 to 0.93). CONCLUSIONS: The trabecular BV/TV was closely correlated with CT values obtained using multislice CT images. It was suggested that the trabecular BV/TV can be used to evaluate the density of mandibular cancellous bone in dental implant treatment.

Postoperative assessment of incisor dental implants using cone-beam computed tomography.

The bone configuration surrounding anterior dental implants was postoperatively assessed using cone-beam computed tomography (CBCT). In 21 patients with a mean age of 41.5 years, 36 implants placed in the incisor region were postoperatively evaluated using CBCT. The rate of bone-to-implant contact (%) was calculated. The mean rate of bone-to-implant contact on the labial side was 78.3% with and 65.3% without bone grafts. The postoperative findings of incisor implants could be assessed using CBCT.

Observation of maxillary sinus septa and bony bridges using dry skulls between Hellman's dental age of IA and IIIC.

Maxillary sinus septa and bony bridges were observed using dry skulls in childhood, classified based on Hellman's dental age, to clarify maxillary sinus septum formation. Eighty-eight maxillary sinuses of 44 dry skulls and a cone-beam computed tomography (CBCT) unit were used. The locations of the septum, defined as a pointed bony structure originating from the inferior wall, and bony bridge, defined as a bony structure between the maxillary sinus wall and dental germ, were antero-posteriorly recorded, and the superoinferior distance, distance from the bony palate, and angle to the median palatine suture were measured. The rate of septum presence in the maxillary sinus was high (41.7%) in IIIC, and the septa were located in the deciduous molars, premolars, and molars. Also, all bony bridges were related to the median maxillary sinus wall, and the rate of the maxillary sinus showing a bony bridge was high in IIA and IIIA. Septum presence in the maxillary sinus was observed in IIA, IIC, IIIA, IIIB, and IIIC of Hellman's dental age. Also, bony bridges were observed in IC, IIA, IIC, IIIA, IIIB, and IIIC of Hellman's dental age.

Reliability of diagnostic imaging for degenerative diseases with osseous changes in the temporomandibular joint with special emphasis on subchondral cyst.

OBJECTIVES: The present study aimed to clarify the reliabilities of four characteristic appearances, subchondral cyst, erosion, generalized sclerosis, and osteophyte, for evaluation of degenerative diseases with osseous changes in the temporomandibular joint (TMJ) using panoramic TMJ projection imaging and computed tomography (CT), and to investigate the imaging features of these modalities for subchondral cyst with reference to its magnetic resonance imaging (MRI) features. METHODS: The reliabilities (κ values) of panoramic TMJ projection and CT images were determined by three radiologists for each characteristic appearance of TMJ osseous changes in 146 condyles. The features of cyst-like areas on CT images with agreement among the three radiologists were investigated for size, location, and continuity with the joint space together with MRI signal intensity and surrounding edema-like lesions. RESULTS: Panoramic TMJ projection images showed moderate and substantial agreements for erosion and osteophyte evaluations, respectively; while CT images showed substantial agreements for subchondral cyst, erosion, and osteophyte evaluations. Cyst-like areas on CT images were predominantly located in the central parts and 69 of 86 (80.2%) areas showed no communication with the joint space. Cyst-like areas with diameters exceeding 2 mm showed high or moderate MRI signal intensities. Edema-like lesions were observed in 10 of 28 (29.4%) condyles. CONCLUSIONS: The reliabilities of panoramic TMJ projection and CT images were clarified for each characteristic appearance. The results support the bone contusion theory for the formation of subchondral cysts in the TMJ. A possible improvement in reliability is suggested relative to MRI findings.

Evaluation of voxel values in mandibular cancellous bone: relationship between cone-beam computed tomography and multislice helical computed tomography.

OBJECTIVE: Measurements of bone density in designed sites are important in presurgical imaging for dental implant treatment. However, the pixel or voxel values obtained from cone-beam computed tomography (CT) images are not absolute values. Hence, the relationship between voxel values obtained from cone-beam CT with a limited-volume exposure field and a flat panel detector and bone mineral densities (BMDs) obtained from multislice CT was evaluated in the mandible. MATERIAL AND METHODS: A total of 16 (four males and 12 females) patients who had undergone imaging for mandibular dental implant treatment using cone-beam CT with Alphard VEGA and multislice CT were enrolled in this investigation. Cross-sectional images of cone-beam and multislice CT were reconstructed, and values of regions of interest (ROIs) in images were calculated. RESULTS: A high-level correlation between voxel values of cone-beam CT and BMDs of multislice CT was observed (r=0.965). CONCLUSION: It was suggested that voxel values of mandibular cancellous bone in cone-beam CT could be used to estimate bone density.