Host autophagy mediates organ wasting and nutrient mobilization for tumor growth.

During tumor growth-when nutrient and anabolic demands are high-autophagy supports tumor metabolism and growth through lysosomal organelle turnover and nutrient recycling. Ras-driven tumors additionally invoke non-autonomous autophagy in the microenvironment to support tumor growth, in part through transfer of amino acids. Here we uncover a third critical role of autophagy in mediating systemic organ wasting and nutrient mobilization for tumor growth using a well-characterized malignant tumor model in Drosophila melanogaster. Micro-computed X-ray tomography and metabolic profiling reveal that RasV12 ; scrib-/- tumors grow 10-fold in volume, while systemic organ wasting unfolds with progressive muscle atrophy, loss of body mass, -motility, -feeding, and eventually death. Tissue wasting is found to be mediated by autophagy and results in host mobilization of amino acids and sugars into circulation. Natural abundance Carbon 13 tracing demonstrates that tumor biomass is increasingly derived from host tissues as a nutrient source as wasting progresses. We conclude that host autophagy mediates organ wasting and nutrient mobilization that is utilized for tumor growth.

Traip controls mushroom body size by suppressing mitotic defects.

Microcephaly is a failure to develop proper brain size and neuron number. Mutations in diverse genes are linked to microcephaly, including several with DNA damage repair (DDR) functions; however, it is not well understood how these DDR gene mutations limit brain size. One such gene is TRAIP, which has multiple functions in DDR. We characterized the Drosophila TRAIP homolog nopo, hereafter traip, and found that traip mutants (traip-) have a brain-specific defect in the mushroom body (MB). traip- MBs were smaller and contained fewer neurons, but no neurodegeneration, consistent with human primary microcephaly. Reduced neuron numbers in traip- were explained by premature loss of MB neuroblasts (MB-NBs), in part via caspase-dependent cell death. Many traip- MB-NBs had prominent chromosome bridges in anaphase, along with polyploidy, aneuploidy or micronuclei. Traip localization during mitosis is sufficient for MB development, suggesting that Traip can repair chromosome bridges during mitosis if necessary. Our results suggest that proper brain size is ensured by the recently described role for TRAIP in unloading stalled replication forks in mitosis, which suppresses DNA bridges and premature neural stem cell loss to promote proper neuron number.

Confounding factors of the expression of mTBI biomarkers, S100B, GFAP and UCH-L1 in an aging population.

OBJECTIVES: To evaluate some confounding factors that influence the concentrations of S100 calcium binding protein B (S100B), glial fibrillary acidic protein (GFAP), and ubiquitin carboxyl-terminal hydrolase L-1 (UCH-L1) in older individuals. Indeed, recent guidelines have proposed the combined use of S100B and the "GFAP-UCH-L1" mTBI test to rule out mild traumatic brain injuries (mTBI). As older adults are the most at risk of mTBI, it is particularly important to understand the confounding factors of those mTBI rule-out biomarkers in aging population. METHODS: The protein S100B and the "GFAP and UCH-L1" mTBI test were measured using Liaison XL (Diasorin) and Alinity I (Abbott), respectively, in 330 and 341 individuals with non-suspected mTBI from the SarcoPhAge cohort. RESULTS: S100B, GFAP and UCH-L1 were all significantly correlated with renal function whereas alcohol consumption, Geriatric Depression Score (GDS), smoking habits and anticoagulant intake were not associated with any of these three biomarkers. Body mass index (BMI) and age were associated with GFAP and UCH-L1 expression while sex and mini-mental state examination (MMSE) were only associated with GFAP. According to the manufacturer's cut-offs for mTBI rule-out, only 5.5 % of participants were positive for S100B whereas 66.9 % were positive for the "GFAP-UCH-L1" mTBI test. All positive "GFAP-UCH-L1" mTBI tests were GFAP+/UCH-L1-. Among individuals with cystatin C>1.55 mg/L, 25 % were positive for S100B while 90 % were positive for the mTBI test. CONCLUSIONS: Our data show that confounding factors have different impacts on the positivity rate of the "GFAP-UCH-L1" mTBI test compared to S100B.

Unused potential of lipid-lowering therapy in very high-risk patients with atherosclerotic cardiovascular disease. A retrospective data analysis.

BACKGROUND: Atherosclerotic cardiovascular disease (ASCVD) is the most common cause of death in Europe. Although the 2019 European Society of Cardiology/European Atherosclerosis Society Guidelines for the management of dyslipidaemias claim a target low-density lipoprotein cholesterol (LDL-C) value of <55 mg/dL for very high-risk patients by use of lipid-lowering therapy (LLT) and lifestyle adaptations, the target level achievement is not satisfactory. We examined LLT use in ASCVD patients exceeding LDL-C target levels at admission and its adaptations at discharge. METHODS AND RESULTS: Between January 2017 and February 2020, 1091 patients with LDL-C >100 mg/dL and ASCVD defined as diagnosis of angina pectoris (AP, n = 179), acute myocardial infarction (AMI, n = 317), chronic ischemic heart disease (CHD, n = 195), or peripheral artery disease (PAD, n = 400) were extracted from hospital records. LLT use on admission and discharge as well as recommendations on lifestyle and nutrition were analysed. On admission, 51% of the patients were not taking LLT. At discharge, 91% were prescribed statins and 87% were advised on lifestyle adaptation and/or pharmacological treatment. High-intensity statin use at discharge was present in 63% of the AP-group, 92% of the AMI-group, 62% of the CHD-group and 71% of the PAD-group. Ezetimibe was present in 16% and proprotein convertase subtilisin/kexin 9 inhibitors (PCSK9i) in 1%. However, of those on high-intensity statin, 25% remained on insufficient statin dosage. CONCLUSION: Switch to high-intensity statins and use of ezetimibe and PCSK9i was low in chronic ASCVD patients. Even though statin intake was high in high-risk patients, target levels were still not reached.

Morphological and Dimensional Analysis of the Nasopalatine Canal: Insights from Cone-Beam Computed Tomography Imaging in a Large Cohort.

BACKGROUND The nasopalatine canal (NPC), or incisive canal, is located in the midline of the palate, posterior to the maxillary central incisors. Its anatomy is important in prosthetic dentistry procedures. This study aimed to assess the anatomical morphology of the NPC according to age, sex, and dental status using cone-beam computed tomography (CBCT) in 335 patients. MATERIAL AND METHODS In this retrospective cross-sectional study, a total of 335 patients were recruited and categorized according to sex, age, and dental status. Individual CBCT images were analyzed in the sagittal, coronal, and axial planes. Also, we recorded the dimensions and morphological shape of the NPC and adjacent buccal bone plate (BBP) under standardized conditions. The associations between sex, age group, NPC shapes and types, and presence of central incisors were assessed. A significance level was set at P<0.05. RESULTS Mean labio-palatal and mediolateral measurements of the incisive foramen were 5.13±1.45 mm and 3.21±0.96 mm, whereas the mean diameter of Stenson foramen was 2.57±1.25 mm, and the total length of the NPC was 11.79±2.50 mm. Funnel, Y, and round-shaped canals were the most prevalent shapes of the NPC in sagittal, coronal, and axial planes. BBP was greater in men, with P=0.011, P=0.000, and P=0.001 at BBP1, BBP2, and BBP3, respectively. CONCLUSIONS NPC and BBP parameter values were slightly higher among male patients. NPC parameters increased with older age. The crest width of BBP decreased with older age and after missing maxillary central incisor teeth.

Radiographic Assessment of 121 Glass Fiber Post Procedures in 32 Patients Aged 21-60 Years Performed by 6th-Year Dental Students During the 2022-2023 Academic Year at the College of Dentistry, Jazan University, Saudi Arabia.

BACKGROUND The restoration of endodontically treated teeth (ETT) and severely damaged teeth has been a concern of clinicians. Glass Fiber Post (GFPs) combine the strength of carbon fiber posts with the esthetic appearance of glass to resemble natural dentin during dental restoration procedures. This radiographical study assessed the GFP carried out by students enrolled in the Clinical Comprehensive Course at the College of Dentistry, Jazan University. MATERIAL AND METHODS A total of 32 patients treated by 18 6th-year dental students with 121 GFPs were assessed in this cross-sectional radiographic study. The assessment covered tooth type, arch, post-to-root width, length of post in relation to the crown and root lengths, amount of remaining gutta percha (GP), and gap between GP and post. Data were analyzed using SPSS, and associations between variables were determined using the chi-square test. RESULTS Maxillary teeth were the most frequently restored with posts (88.4%) with most being (58.7%) anterior teeth, and 50.4% of posts had widths that were one-third that of the root. The percentage of posts was twice (71.1%) or equal to (26.4%) the crown length, whereas two-thirds of the tested GFPs were >5 mm of the remaining GP. Significant differences were observed in location and position of teeth with post width, post length in relation to crown or root length, and amount of remaining GP, with P values of 0.018, 0.000, and 0.001, respectively. CONCLUSIONS The assessed radiographs revealed that the performance of sixth year students in accomplishment GFP radiographically was satisfactory and within the values recommended in the literature.

The Impact of Repeated Steam Sterilization Cycles on the Efficacy of Chairside Adjustment Kits for Polishing Monolithic Multi-Layered Zirconia Dental Restoration Material.

BACKGROUND Before insertion, chairside adjustment kits are heat sterilized for positioning and polishing dental restorations. This study aimed to evaluate the effects of 2 steam sterilization cycles on the efficacy of polishing highly translucent monolithic zirconia (HTMLZ) dental restoration material. MATERIAL AND METHODS 100 HTMLZ disc-shaped specimens were adjusted (grinding, finishing, polishing) with EVE Diacera kit. Two steam sterilization techniques [standard (Gp S), immediate/flash (Gp (F)] of CAK were further subgrouped based on number of sterilization cycles [cycle 1 (control), cycle 5, 10, 15, and 20 (experimental)] (n=10 each). Each subgroup accordingly was evaluated for average surface roughness (Ra) and root mean square roughness (Rq) using a profilometer. Mean and standard deviation of 5 subgroups were statistically analyzed using one-way ANOVA/post hoc Tukey's test. Scanning electron microscopy complemented Ra, Rq measurements. Statistical differences of P≤0.05 were considered significant. RESULTS HTMLZ specimens in both groups showed increased (Ra/Rq) values after repeated sterilization of EVE Diacera kit, with Gp F showing lesser increase than Gp S (20 cycles). Gp F at 10 cycles and Gp S at 15 cycles showed clinically unacceptable roughness threshold (0.25 µm). Differences between subgroups for Ra and Rq values were significant (P≤0.05) with less differences within groups observed in early cycles (1, 10). Results validate the manufacturer's recommendations of using flash sterilization/10 cycles for EVE Diacera kit. CONCLUSIONS Repeated sterilization reduces efficacy of chairside adjustment kit to produce smooth surfaces on HTMLZ. This study recommends flash sterilization to a maximum of 10 times to get the clinically acceptable results of Ra and Rq.

The prevalence of sedentary behavior among university students in Saudi Arabia.

BACKGROUND: A considerable body of research has demonstrated that reducing sitting time benefits health. Therefore, the current study aimed to explore the prevalence of sedentary behavior (SB) and its patterns. METHODS: A total of 6975 university students (49.1% female) were chosen randomly to participate in a face-to-face interview. The original English version of the sedentary behavior questionnaire (SBQ) was previously translated into Arabic. Then, the validated Arabic version of the SBQ was used to assess SB. The Arabic SBQ included 9 types of SB (watching television, playing computer/video games, sitting while listening to music, sitting and talking on the phone, doing paperwork or office work, sitting and reading, playing a musical instrument, doing arts and crafts, and sitting and driving/riding in a car, bus or train) on weekdays and weekends. RESULTS: SBQ indicated that the total time of SB was considerably high (478.75 ± 256.60 and 535.86 ± 316.53 (min/day) during weekdays and weekends, respectively). On average, participants spent the most time during the day doing office/paperwork (item number 4) during weekdays (112.47 ± 111.11 min/day) and weekends (122.05 ± 113.49 min/day), followed by sitting time in transportation (item number 9) during weekdays (78.95 ± 83.25 min/day) and weekends (92.84 ± 100.19 min/day). The average total sitting time of the SBQ was 495.09 ± 247.38 (min/day) and 58.4% of the participants reported a high amount of sitting time (≥ 7 hours/day). Independent t-test showed significant differences (P ≤ 0.05) between males and females in all types of SB except with doing office/paperwork (item number 4). The results also showed that male students have a longer daily sitting time (521.73 ± 236.53 min/day) than females (467.38 ± 255.28 min/day). Finally, 64.1% of the males reported a high amount of sitting time (≥ 7 hours/day) compared to females (52.3%). CONCLUSION: In conclusion, the total mean length of SB in minutes per day for male and female university students was considerably high. About 58% of the population appeared to spend ≥7 h/day sedentary. Male university students are likelier to sit longer than female students. Our findings also indicated that SB and physical activity interventions are needed to raise awareness of the importance of adopting an active lifestyle and reducing sitting time.

The single point insulin sensitivity estimator (SPISE) is associated with bone health in Arab adults.

BACKGROUND: The Single Point Insulin Sensitivity Estimator (SPISE) index is a surrogate marker for insulin sensitivity. Given the emerging role of bone as an active endocrine organ, its associations with non-invasive measures of extra-skeletal functions such as insulin sensitivity warrant investigation. AIMS: This study aimed to explore the relationship between the SPISE index and Bone Mineral Density (BMD) in an adult population. METHODS: Data from a total of 1270 Arab adults (84% females, mean age 56.7 ± 8.1 years) from the Osteoporosis Registry Database of the Chair for Biomarkers of Chronic Diseases in King Saud University, Riyadh, Saudi Arabia was used in this study. T-scores and SPISE were calculated. Regression models were used to determine associations between SPISE and bone health indices. RESULTS: The low BMD group (N = 853; T-score <-1.0) had significantly higher SPISE values than those with normal BMD (N = 417; T-score - 1.0 and above) (4.6 ± 1.3 vs. 4.3 ± 1.2, p < 0.001). Multivariate linear regression, adjusted for covariates, confirmed a significant inverse association between SPISE and BMD for all participants (ß=-0.22, p < 0.001), as well as both groups [normal BMD (ß = -0.10, p = 0.02) and low BMD groups (ß = -0.15, p < 0.001)]. SPISE, family history of T2DM, and history of fractures collectively account for 17% of the variances perceived in T-score for all participants (p < 0.001). CONCLUSIONS: A significant inverse association between the SPISE index and BMD was observed in adults, suggesting a link between BMD and extra-skeletal health. Underlying mechanisms need to be investigated prospectively using BMD as secondary outcomes in lifestyle modification programs.

Circulating Interleukins-33 and -37 and Their Associations with Metabolic Syndrome in Arab Adults.

Interleukins (ILs) are a group of cytokines known to have immunomodulatory effects; they include ILs-33 and -37 whose emerging roles in the pathogenesis of metabolic syndrome (MetS) remain under investigated. In this study, we compared circulating IL-33 and IL-37 in Arab adults with and without MetS to determine its associations with MetS components. A total of 417 Saudi participants (151 males, 266 females; mean age ± SD 41.3 ± 9.0 years; mean body mass index ± SD 30.7 ± 6.3 kg/m2) were enrolled and screened for MetS using the ATP III criteria. Anthropometrics and fasting blood samples were taken for the assessment of fasting glucose and lipids. Circulating levels of IL-33 and IL-37 were measured using commercially available assays. The results showed higher levels of serum IL-33 and IL-37 in participants with MetS than those without (IL-33, 3.34 3.42 (2.3-3.9) vs. (1-3.9), p = 0.057; IL-37, 5.1 (2.2-8.3) vs. 2.9 (2.1-6.1), p = 0.01). Additionally, having elevated levels of IL-33 was a risk factor for hypertension, low HDL-c, and hypertriglyceridemia. A stratification of the participants according to sex showed that males had higher IL-33 levels than females [3.7 (3.0-4.1) vs. 3.15 (1.4-3.8), p < 0.001], while females had higher levels of IL-37 than males [3.01 (2.2-7.0) vs. 2.9 (2.1-5.6), p = 0.06]. In conclusion, the presence of MetS substantially alters the expression of ILs-33 and -37. IL-33 in particular can be potentially used as a therapeutic target to prevent MetS progression. Longitudinal and interventional studies are warranted to confirm present findings.

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

BACKGROUND: Dental casts made utilising digital workflow are becoming more common because to their speed and cost savings. However, studies on their dimensional accuracy over time with diverse designs are missing. OBJECTIVE: The aim of this in vitro study was to assess the dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models with 50-micrometer resolution over 1 day, 14 days, and 28 days using surface matching software. METHODS: Scanned edentulous and fully dentate maxillary typodont models were used as references. The models were scanned by a desktop lab scanner of 15-micrometer accuracy (D900, 3Shape). Then, the files were used in designing software (Meshmixer, Autodesk) to create hollowed maxillary casts. Fifteen edentulous and 15 fully dentate (total of 30) models were printed using a DLP lab printer (Cara print 4.0, Kulzer). The 3D-printed models were scanned using the same desktop lab scanner of 15-micrometer accuracy at intervals of baseline days, 1 day, 14 days, and 28 days to assess the effect of aging (n = 120). The dimensional changes were quantified and compared using the root mean square (RMS) method, expressed in micrometres (µm). The study employed repeated measures analysis of variance (ANOVA) to assess and compare the root mean square (RMS) values across the variables. The data was analysed using SPSS (26, Chicago, Illinois, USA). RESULTS: The RMS of the edentulous models rapidly increased from a mean value of 0.257 at the beginning of the study to 0.384 after twenty-eight days. However, the mean RMS values for the dentate models did not change much over the four intervals. It varied only from 0.355 to 0.347. The mean values for edentulous patients increased from 0.014 to 0.029 during the period from baseline to twenty-eight days. However, the mean average values decreased for the dentate models from 0.033 to 0.014 during this period. By utilizing ANOVA, mean RMS values increased insignificantly till one day but significantly to fourteen and twenty-eight days. Dentate model mean values differed insignificantly across four intervals. Repeated measures ANOVA for combined and separated data showed no significant differences across edentulous, dentate, and total models over times. CONCLUSION: The study revealed changes in the dimensions of 3D-printed edentulous models over a span of 3 and 4 weeks. Caution should be applied when using 3D-printed dental master models for constructing definitive prostheses on edentulous models over a period of 3 to 4 weeks.

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

BACKGROUND: Vinyl polyether silicone (VPES) is a novel impression biomaterial made of a combination of vinyl polysiloxane (VPS) and polyether (PE). Thus, it is significant to assess its properties and behaviour under varied disinfectant test conditions. This study aimed to assess the dimensional stability of novel VPES impression material after immersion in standard disinfectants for different time intervals. METHODS: Elastomeric impression material used -medium body regular set (Monophase) [Exa'lence GC America]. A total of 84 Specimens were fabricated using stainless steel die and ring (ADA specification 19). These samples were distributed into a control group (n=12) and a test group (n=72). The test group was divided into 3 groups, based on the type of disinfectant used - Group-A- 2% Glutaraldehyde, Group-B- 0. 5% Sodium hypochlorite and Group-C- 2% Chlorhexidine each test group was further divided into 2 subgroups (n=12/subgroup) based on time intervals for which each sample was immersed in the disinfectants - subgroup-1- 10 mins and Subgroup 2- 30 mins. After the impression material was set, it was removed from the ring and then it was washed in water for 15 seconds. Control group measurements were made immediately on a stereomicroscope and other samples were immersed in the three disinfection solutions for 10 mins and 30 mins to check the dimensional stability by measuring the distance between the lines generated by the stainless steel die on the samples using a stereomicroscope at x40 magnification. RESULTS: The distance measured in the control group was 4397.2078 µm and 4396.1571 µm; for the test group Group-A- 2% Glutaraldehyde was 4396.4075 µm and 4394.5992 µm; Group-B- 0. 5% Sodium hypochlorite was 4394.5453 µm and 4389.4711 µm Group-C- 2% Chlorhexidine was 4395.2953 µm and 4387.1703 µm respectively for 10 mins and 30 mins. Percentage dimensional change was in the range of 0.02 - 0.25 for all the groups for 10 mins and 30 mins. CONCLUSIONS: 2 % Glutaraldehyde is the most suitable disinfectant for VPES elastomeric impression material in terms of dimensional stability and shows minimum dimensional changes as compared to that of 2% Chlorhexidine and 0.5% Sodium hypochlorite.

Hepatitis D double reflex testing of all hepatitis B carriers in low-HBV- and high-HBV/HDV-prevalence countries.

Hepatitis D virus (HDV) infection occurs as a coinfection with hepatitis B and increases the risk of hepatocellular carcinoma, decompensated cirrhosis, and mortality compared to hepatitis B virus (HBV) monoinfection. Reliable estimates of the prevalence of HDV infection and disease burden are essential to formulate strategies to find coinfected individuals more effectively and efficiently. The global prevalence of HBV infections was estimated to be 262,240,000 in 2021. Only 1,994,000 of the HBV infections were newly diagnosed in 2021, with more than half of the new diagnoses made in China. Our initial estimates indicated a much lower prevalence of HDV antibody (anti-HDV) and HDV RNA positivity than previously reported in published studies. Accurate estimates of HDV prevalence are needed. The most effective method to generate estimates of the prevalence of anti-HDV and HDV RNA positivity and to find undiagnosed individuals at the national level is to implement double reflex testing. This requires anti-HDV testing of all hepatitis B surface antigen-positive individuals and HDV RNA testing of all anti-HDV-positive individuals. This strategy is manageable for healthcare systems since the number of newly diagnosed HBV cases is low. At the global level, a comprehensive HDV screening strategy would require only 1,994,000 HDV antibody tests and less than 89,000 HDV PCR tests. Double reflex testing is the preferred strategy in countries with a low prevalence of HBV and those with a high prevalence of both HBV and HDV. For example, in the European Union and North America only 35,000 and 22,000 cases, respectively, will require anti-HDV testing annually.

Real-world evidence: new opportunities for osteoporosis research. Recommendations from a Working Group from the European Society for Clinical and Economic Aspects of Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (ESCEO).

This narrative review summarises the recommendations of a Working Group of the European Society for Clinical and Economic Aspects of Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (ESCEO) for the conduct and reporting of real-world evidence studies with a focus on osteoporosis research. PURPOSE: Vast amounts of data are routinely generated at every healthcare contact and activity, and there is increasing recognition that these real-world data can be analysed to generate scientific evidence. Real-world evidence (RWE) is increasingly used to delineate the natural history of disease, assess real-life drug effectiveness, understand adverse events and in health economic analysis. The aim of this work was to understand the benefits and limitations of this type of data and outline approaches to ensure that transparent and high-quality evidence is generated. METHODS: A ESCEO Working Group was convened in December 2022 to discuss the applicability of RWE to osteoporosis research and approaches to best practice. RESULTS: This narrative review summarises the agreed recommendations for the conduct and reporting of RWE studies with a focus on osteoporosis research. CONCLUSIONS: It is imperative that research using real-world data is conducted to the highest standards with close attention to limitations and biases of these data, and with transparency at all stages of study design, data acquisition and curation, analysis and reporting to increase the trustworthiness of RWE study findings.

Protective Effect of Hydrogen Sulfide on Cerebral Ischemia-Reperfusion Injury.

The brain is the most sensitive organ to hypoxia in the human body. Hypoxia in the brain will lead to damage to local brain tissue. When the blood supply of ischemic brain tissue is restored, the damage will worsen, that is, cerebral ischemia-reperfusion injury. Hydrogen sulfide (H2S) is a gaseous signal molecule and a novel endogenous neuroregulator. Indeed, different concentrations of H2S have different effects on neurons. Low concentration of H2S can play an important protective role in cerebral ischemia-reperfusion injury by inducing anti-oxidative stress injury, inhibition of inflammatory response, inhibition of cell apoptosis, reduction of cerebrovascular endothelial cell injury, regulation of autophagy, and other ways, which provides a new idea for clinical diagnosis and treatment of related diseases. This review aims to report the recent research progress on the dual effect of H2S on brain tissue during cerebral ischemia/reperfusion injury.

Comparative Analysis of Properties in Chairside Silicone Denture Liners versus Heat-Cured Molloplast-B: An In-Depth In Vitro Evaluation.

BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used. For water absorption, IOS 1567 was followed to prepare specimens. Bond strengths were measured using a Lloyd Instruments materials testing machine. Ten specimens for each test were prepared for each soft liner, except for water absorption and solubility tests, for which only 5 specimens were prepared. ANOVA, Bonferroni, and Kruskal-Wallis tests were used to compare values of materials and assess changes over time. RESULTS There was strong evidence of differences in the properties between materials. GC Reline Soft showed comparable tensile bond (1.4±0.6 MPa), shear bond (1.1±0.4 MPa), tensile strength (5.44±0.98), water absorption (0.92±0.2 µg/mm³), and solubility values (0.3±0.2 µg/mm3) to that of Molloplast B (1.4±0.4; 1.6±0.5; 4.53±0.9 MPa, 1.7±0.3, and 1.0±0.3 µg/mm³, respectively). The water solubility of Sofreliner Soft was significantly lower (1.5±0.8 µg/mm³) than that of Molloplast B. CONCLUSIONS There were significant differences between some properties of 4 chairside denture soft lining materials and that of Molloplast B, which had higher shear and tensile bond strength than chairside denture silicone soft lining materials but had the highest water solubility.

Unlocking Endocrown Restoration Expertise Among Dentists: Insights from a Multi-Center Cross-Sectional Study.

BACKGROUND This study, employing an online questionnaire, aimed to assess and contrast the awareness, knowledge, and perceptions of dentists in Saudi Arabia (SA) regarding endocrowns (EC) as post-endodontic restorations with those of dentists educated in various other countries. MATERIAL AND METHODS We conducted a cross-sectional survey among dental interns and practicing dentists in government facilities, private dental centers, and dental colleges in SA, including participants of diverse nationalities. We disseminated validated, closed-ended questionnaires through WhatsApp via Google Forms. The Chi-square test was applied to assess associations between categorical variables, with a P-value of ≤0.05 indicating statistical significance. RESULTS The majority of participants (61.2%) indicated that EC restorations are best suited for molar teeth. Furthermore, 69.6% asserted that the primary objective of employing EC is to accomplish minimally invasive preparations while preserving the existing tooth structure. Among the responses, 68.3% pinpointed debonding of ECs as a significant cause of failure. Notably, substantial differences were observed in responses concerning the knowledge or practice of EC across various factors such as gender, educational attainment, country of graduation, and workplace. CONCLUSIONS The findings reveal a comparatively low adoption of ECs among the participants, irrespective of experience or country of education. This underscores the need for incorporating ECs into dental curricula through theoretical and clinical discussions or considering them as a subject for post-graduate continuing education programs.

Comparative Evaluation of Dimensional and Occlusal Accuracy of Non-Working Antagonist Casts: A Study on Different Impression Materials and 3D Printing.

BACKGROUND The aim of this study was to assess and compare the vertical/horizontal dimensions and occlusal accuracy of non-working/opposing casts obtained from three different impression materials and 3D print cast. MATERIAL AND METHODS Dentulous Master models simulating a case of a fixed dental prosthesis were mounted on an articulator (control group). Opposing mandibular casts obtained from three different impression materialsand 3-dimensional print constituted test groups , ,and , respectively. Three points, anterior vertical (AV), posterior vertical (PV), and anteroposterior (AP) were compared for dimensional accuracy among casts. Occlusal accuracy was analyzed on Medit Link software at 3 teeth (#13, #17, and #27). After calculating means for each group, the differences were calculated at probability value of P≤0.05 using the single-sample t test, ANOVA, and Tukey test. RESULTS The dimensions were significantly different from those of the mounted master models except in Gp AL(E) and Gp AL(F) at AV dimension and Gp AL(E) at AP dimension (P>0.05). A statistically significant difference of the error of means among the 4 tested groupswere detected only at 2 dimensions (AV and PV) between the Gp AL(E) and Gp 3D-C and between Gp AL(F) and Gp 3D-C groups. Other groups showed no significant differences. CONCLUSIONS The opposing casts obtained from the extended-pour alginate and alginate alternative impression materials showed higher occlusal accuracy compared to conventional alginate and 3D printed casts.

Stigma Toward Mental Illness Among Saudi Medical Students: Pre and Post Psychiatry Course Comparison.

ABSTRACT: This cross-sectional study aims to compare pre- versus post-psychiatry course stigma levels toward mental illnesses among King Saud University medical students and identify which factors could affect stigma degree. The sample included 384 randomly chosen students. The overall scores of the used scale, the 15-item Opening Minds Scale for Healthcare Providers (OMS-HC-15), indicated no statistically significant difference between the before- and the after-psychiatry-course groups. The univariate analysis for differences in OMS-HC-15 score according to the sociodemographic characteristics of the pre psychiatry course group indicated that the factors associated with the total OMS-HC-15 score were sex ( p < 0.001), being diagnosed with mental illness ( p < 0.001), and having a relative diagnosed with mental illness ( p = 0.005). Among the post psychiatry course group, the univariate analysis indicated that the same factors, namely, sex ( p = 0.001), being diagnosed with mental illness ( p = 0.006), and having a relative diagnosed with mental illness ( p = 0.007), were associated with the total OMS-HC-15 score. Further studies at a larger scale to confirm generalizability of the results are warranted.

Role of Endoscopy in Treatment of Complex Hydrocephalus in Children.

Complex hydrocephalus or loculated hydrocephalus is a challenging problem in the field of pediatric neurosurgery. Early diagnosis and treatment are paramount in order to ensure success of treatment. Therefore, alertness is required among pediatricians who are dealing with premature children and children having meningitis and/or intraventricular hemorrhage. Disproportionate hydrocephalic changes in CT scan of the brain are suspicious, whereas gadolinium-enhanced multiplanar MR imaging (axial, sagittal, and coronal) is the best diagnostic modality. The definitive treatment is surgical, yet the approach remains a matter of debate. Cyst fenestration, communicating the isolated compartments together and with the ventricular system, is the main strategy of treatment. Cyst fenestration can be performed through either microsurgery or endoscopy, in order to improve the hydrocephalus, decrease number of shunts, and reduce shunt revision rates. However, the endoscopic procedure has an advantage over microsurgery of being simple and minimally invasive. It is evident that uniloculated hydrocephalus carries better prognosis than multiloculated hydrocephalus; this can be attributed to the initial pathological disease contributing to the ventricular compartmentalization. Because of the bad prognosis in multiloculated hydrocephalus, and because there are few numbers of patients available in any given center, a multicentric prospective study with long-term follow-up evaluating the results of outcome and quality of life is warranted.