RESUMO
INTRODUCTION: The FOLFOX6 scheme is a combination drug chemotherapy that contains calcium leucovorin (folinic acid), fluorouracil, and oxaliplatin, the chronic use of chemotherapy with oxaliplatin can progress to focal nodular hyperplasia (FNH), which is a benign hepatic lesion. CASE REPORT: We present a case of a 26- year-old female diagnosed with an ovarian mixed germ cell tumor with extension to the peritoneum, treated with 12 cycles in 9 months with neoadjuvant chemotherapy FOLFOX 6 scheme and oophorectomy. A three-year follow-up CT showed three nodular and hypervascular hepatic lesions suspicious of metastatic disease; an MRI with liver-specific contrast confirmed the diagnosis of FNH. MANAGEMENT AND OUTCOME: The patient continued her follow-up without other treatment and metastatic disease. DISCUSSION: While most multiple liver lesions in a patient with cancer will be suspicious of metastasis, a careful drug history should be obtained, as an oxaliplatin-related side effect to develop FNH has been reported. MRI with liver-specific contrast has a positive predictive value of 95% because of the biliary excretion through OATP1B3 transporter, expressed in functional hepatocytes and overexpressed in some liver tumors such as FNH, so it should be performed when FNH is suspected.
Assuntos
Hiperplasia Nodular Focal do Fígado , Neoplasias Hepáticas , Neoplasias Gástricas , Humanos , Feminino , Adulto , Hiperplasia Nodular Focal do Fígado/induzido quimicamente , Hiperplasia Nodular Focal do Fígado/diagnóstico , Hiperplasia Nodular Focal do Fígado/patologia , Oxaliplatina , Neoplasias Gástricas/tratamento farmacológico , Neoplasias Gástricas/patologia , Neoplasias Hepáticas/diagnóstico , FígadoRESUMO
OBJECTIVES: To explore a method to create affordable anatomical models of the biliary tree that are adequate for training laparoscopic cholecystectomy with an in-house built simulator. METHODS: We used a fused deposition modeling 3D printer to create molds of Acrylonitrile Butadiene Styrene (ABS) from Digital Imaging and Communication on Medicine (DICOM) images, and the molds were filled with silicone rubber. Thirteen surgeons with 4-5-year experience in the procedure evaluated the molds using a low-cost in-house built simulator utilizing a 5-point Likert-type scale. RESULTS: Molds produced through this method had a consistent anatomical appearance and overall realism that evaluators agreed or definitely agreed (4.5/5). Evaluators agreed on recommending the mold for resident surgical training. CONCLUSIONS: 3D-printed molds created through this method can be applied to create affordable high-quality educational anatomical models of the biliary tree for training laparoscopic cholecystectomy.
Assuntos
Colecistectomia Laparoscópica/educação , Ducto Cístico/anatomia & histologia , Internato e Residência/métodos , Modelos Anatômicos , Treinamento por Simulação/métodos , Colangiopancreatografia por Ressonância Magnética , Ducto Cístico/diagnóstico por imagem , Ducto Cístico/cirurgia , Humanos , Internato e Residência/economia , Impressão Tridimensional , Treinamento por Simulação/economia , Cirurgiões/educaçãoRESUMO
BACKGROUND: Pancreatic cancer induces parenchymal atrophy and duct dilation. The aim of this study was to evaluate whether these radiologic modifications are associated with outcomes. METHODS: Upfront pancreaticoduodenectomy patients with available preoperative contrast enhanced CT scan imaging were retrospectively analyzed. Thickness of the pancreas, size of the main pancreatic duct (MPD), and distance of the tumor from the ampulla were assessed. A training cohort was selected, including short- (3-12 months following surgery) and long-term (≥ 36 months) survivors. Identified survival determinants were validated in the overall cohort. RESULTS: Two-hundred-sixteen patients were analyzed. In the training cohort (N = 118), 68 patients (57.6%) were in the short-term and 50 (42.4%) in the long-term survival group. The short-term survival group had significantly higher CA 19-9 levels (p = 0.027), larger tumors (32.6 ± 12.1 mm vs. 26.5 ± 11.6 mm, p = 0.007), poorer differentiation (p = 0.003), higher rate of R < 1 mm resections (54% vs. 32%, p = 0.008), and reduced receipt of adjuvant chemotherapy (p = 0.020). The MPD-to-pancreatic thickness ratio was significantly lower in the short-term survivors (3.6 ± 6.2 vs. 8.2 ± 12.0, p = 0.016). In the entire cohort, an MPD-to-pancreatic thickness ratio ≥ 3.5 was associated with improved OS [median 33.0 months IQR (19.7-48.1) versus 17 months IQR (14.8-19.2), p = 0.004], and confirmed by a Cox-proportional hazards model independently associated with OS (HR = 0.58; p = 0.009), together with tumor size (HR = 1.02; p =0.012), R1/R2 status (HR = 1.53; p = 0.029), and receipt of adjuvant treatment (HR = 0.61; p = 0.021). CONCLUSIONS: High MPD-to-pancreatic thickness ratio was associated with improved long-term survival in pancreaticoduodenectomy for cancer. Whether these features are related to tumor chronicity, indolent biology, or local growth over metastasis remains to be determined.
Assuntos
Adenocarcinoma/cirurgia , Ductos Pancreáticos/patologia , Neoplasias Pancreáticas/cirurgia , Pancreaticoduodenectomia/mortalidade , Adenocarcinoma/mortalidade , Idoso , Feminino , Humanos , Masculino , Massachusetts/epidemiologia , Pessoa de Meia-Idade , Ductos Pancreáticos/diagnóstico por imagem , Neoplasias Pancreáticas/mortalidade , Cuidados Pré-Operatórios , Prognóstico , Curva ROC , Estudos Retrospectivos , Análise de Sobrevida , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: While the association between Diabetes Mellitus (DM) and pancreatic ductal adenocarcinoma is well recognized, its importance in intraductal papillary mucinous neoplasm of the pancreas (IPMN) is not well-defined. We sought to examine the associations of DM with degree of dysplasia and morphological subtypes in IPMN. METHODS: In 454 patients with resected IPMN, we evaluated associations of DM with high-grade dysplasia (HGD), invasive carcinoma, precursor epithelial subtype (gastric, intestinal, oncocytic, pancreatobiliary), and histological type of invasive carcinomas (tubular, colloid, oncocytic) using logistic regression. We performed multivariate analyses adjusting for worrisome features and high-risk stigmata of malignancy in a subset of 289 patients with annotated radiological characteristics. RESULTS: The prevalence of DM in our study was 34%. DM was significantly associated with HGD (OR 2.02, 95% CI 1.02-4.01, P = 0.045) and invasive carcinoma (OR 2.05, 95% CI 1.08-3.87, P = 0.027) after adjusting for worrisome features. Compared to patients without DM, those with recent-onset DM (≤5 years before surgery) had 6.9-fold (95% CI 2.38-19.92, P < 0.001) higher risk of invasive carcinoma. DM was associated with increased likelihood of intestinal-type precursor epithelium (OR 1.63, 95% CI 1.07-2.47, P = 0.022) and colloid carcinomas (OR 2.46, 95% CI 1.01-5.99, P = 0.047) CONCLUSION: Preoperative DM was associated with significantly higher risk of HGD and invasive carcinoma in resected IPMN, and risk of invasive carcinoma was highest in patients with recent-onset DM. Patients with DM were more likely to harbor intestinal-type IPMN and colloid carcinomas. Our findings suggest that a diagnosis of DM in patients with IPMN may warrant more aggressive surveillance.
Assuntos
Adenocarcinoma Mucinoso/patologia , Carcinoma Intraductal não Infiltrante/patologia , Carcinoma Ductal Pancreático/patologia , Carcinoma Papilar/patologia , Diabetes Mellitus/patologia , Neoplasias Pancreáticas/patologia , Idoso , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Invasividade Neoplásica/patologia , Razão de Chances , Estudos Retrospectivos , Fatores de RiscoRESUMO
Anomalies of the inferior vena cava (IVC) are often discovered incidentally, yet they pose significant challenges in both diagnosis and treatment. This study discusses a case of a 50-year-old female with situs inversus and well-differentiated cholangiocarcinoma, emphasizing the rarity and complexity involved. Imaging studies confirmed the presence of dextrocardia, abdominal situs inversus, and an interrupted IVC with continuation to the azygos vein. A thorough understanding of IVC embryology is crucial, as it helps explain the pathogenesis of such anomalies, which arise from disturbances in the embryonic venous system leading to various anatomical variations. Managing an interrupted IVC is critical due to the potential for vascular complications, highlighting the need for preoperative awareness. This study underlines the importance of recognizing and properly managing these rare vascular anomalies to improve patient care.
RESUMO
Background: This study aimed to explore a low-cost solution for virtual surgical planning/3D printed surgical guides in a training hospital, assessing the impact on intraoperative time and bleeding. Material and Methods: We included a total of 13 patients. 8 who underwent maxillofacial reconstruction surgery with fibula-free flap utilizing virtual surgical planning/3D printed guides (VP/SG), and 5 using conventional surgery (CS) from 2017 to 2020. The surgical time, bleeding, length of hospital stay, and comorbidities were collected and compared in two groups. We recorded the average cost for the complete surgical planning and 3D printed guides. We applied a qualitative survey to the surgeons involved in the surgical procedures. Results The mean surgical time in the VP/SG group was 8.16 ± 2.7, compared to the CS group 12.5 ± 3.8, showing a 4.34â hours difference with statistical significance (p = 0.033). Patients from the CS group had a higher bleeding volume of 921 ± 467.6 mL VS 760 ± 633.8 mL in the VP/SG group. The average cost for the complete surgical planning and 3D printed guides was 914.44 ± 46.39 USD. All the surgeons who answered the survey preferred to perform the procedure utilizing the virtual planning/3D printed guides. Conclusions Virtual planning and 3D printed surgical guides have the potential to reduce operation time in maxillofacial reconstruction.
Contexte : Cette étude visait à explorer une solution peu coûteuse pour la planification chirurgicale virtuelle/l'impression 3D de guides chirurgicaux dans un hôpital d'enseignement, en évaluant leur impact sur le temps peropératoire et le saignement. Matériel et méthodes : Nous avons inclus un total de 13 patients; 8 patients ont subi une chirurgie de reconstruction faciale avec lambeau libre de péroné (fibula) utilisant une planification chirurgicale virtuelle/des guides imprimés en 3D (VP/SG) et 5 patients ont subi une chirurgie conventionnelle (CS) entre 2017 et 2020. Le temps opératoire, le saignement, la durée de l'hospitalisation et les comorbidités ont été consignés et comparés entre les deux groupes. Nous avons enregistré le coût moyen pour la planification chirurgicale complète et les guides imprimés en 3D. Nous avons appliqué une enquête qualitative aux chirurgiens impliqués dans les procédures chirurgicales. Résultats : Le temps opératoire moyen dans le groupe VP/SG a été de 8,16 ± 2,7, comparativement à 12,5 ± 3,8 dans le groupe CS, soit une différence de 4,4 heures avec une signification statistique (P = 0033). Des patients du groupe CS ont perdu un plus grand volume de sang que les patients du groupe VP/SG (respectivement, 921 ± 467.6 mL contre 760 ± 633.8 mL). Le coût moyen de la planification chirurgicale complète et des guides imprimés en 3D a été de 914,44 ± 46,39 US$. Tous les chirurgiens ayant répondu à l'enquête ont préféré utiliser la planification virtuelle/les guides imprimés en 3D pour la réalisation de la procédure. Conclusions : La planification virtuelle et les guides chirurgicaux imprimés en 3D ont le potentiel de réduire les temps opératoires pour la reconstruction maxillo-faciale.
RESUMO
PURPOSE: To perform a quantitative analysis of the amount of cancellous bone in the distal radius and olecranon process by segmentation of computed tomographic scans. As a secondary analysis, the bone density by Hounsfield units was evaluated at the same sites. METHODS: Computed tomography angiography images of the upper extremity were analyzed using 3-D Slicer™ medical imaging software. Bone volume (cm3) and density (Hounsfield units) from the cancellous bone between the distal radius and the olecranon process were compared by creating an advanced three-dimensional model. The images were analyzed in duplicate, and an intraclass correlation was performed to assess measurement consistency. RESULTS: Twenty subjects were included. A total volume of 5.01 ± 1.21 cm3 and 5.81 ± 1.61 cm3 for the distal radius and the olecranon process (p < .0001), respectively, was found. Regarding Hounsfield units, the density of the olecranon process was 303.1 ± 73.26, and the distal radius was 206.5 ± 63.73 (p < .0001). All intraclass correlation coefficients were >0.992. CONCLUSION: These results suggest that the olecranon process has a greater volume and a higher bone mineral density than the distal radius. With these results, the surgeon will have the ability to decide the quantity and quality of bone grafts according to the surgical procedure.
Assuntos
Densidade Óssea , Imageamento Tridimensional , Rádio (Anatomia) , Tomografia Computadorizada por Raios X , Humanos , Rádio (Anatomia)/diagnóstico por imagem , Rádio (Anatomia)/cirurgia , Masculino , Feminino , Pessoa de Meia-Idade , Adulto , Tomografia Computadorizada por Raios X/métodos , Olécrano/diagnóstico por imagem , Olécrano/cirurgia , Transplante Ósseo/métodos , Idoso , Extremidade Superior/cirurgia , Extremidade Superior/diagnóstico por imagem , Osso Esponjoso/diagnóstico por imagem , Osso Esponjoso/transplanteRESUMO
INTRODUCTION: Lumbar puncture (LP) is a common invasive technique considered an essential learning milestone for anesthesiologists due to its application in spinal anesthesia. We aimed to develop an in-house LP simulator, test its effectiveness in learning the steps to perform an LP and analyze its impact on the first-year residents' self-confidence at our hospital. METHODS: We used 3D printing and silicone casting to create an LP simulator based on a lumbar spine computed tomography (CT). We divided 12 first-year anesthesiology residents into control and experimental groups. The control group received traditional training, while the experimental group practiced with the simulator for three months. We used a procedure checklist and a Likert scale survey to evaluate their procedural knowledge and self-confidence at baseline, three, and six months. Eighteen months later, we evaluated their LP performance skills. RESULTS: Both groups showed a significant improvement in their knowledge scores over time. After three months, the experimental group had a higher median knowledge score (10 (10 - 10) median (min-max)) than the control group (9 (8 - 9.5) median (min-max)) (p = 0.03). While there were no apparent differences in median self-confidence scores between the groups at any time point, the experimental group had a significant increase in their self-confidence for performing an unassisted LP, with a median score of 1/5 (1 - 2.3) at baseline and 5/5 (4.8 - 5) after six months (p = 0.006). In contrast, the control group's self-confidence scores decreased from 4/5 (3 - 4) after three months to 3/5 (2 - 5) after six months. The evaluation of performance skills did not yield statistically significant results. CONCLUSION: Our study demonstrates that an in-house LP simulator is an effective and practical approach for first-year anesthesiology residents to learn the LP procedure. This approach could be particularly useful in settings with limited resources and a lack of sufficient patients to practice on, as it provides an opportunity for faster learning and increased self-confidence.
RESUMO
Renal cancer has a global incidence and mortality of 2.2 and 1.8%, respectively. Up to 30% of these patients are intrinsically resistant to tyrosine kinase inhibitors (TKI). The National Comprehensive Cancer Network guidelines do not include any predictive factors regarding response to systemic therapy with TKI in recurrent and advanced diseases. The present study aimed to explore whether a model based on radiomics could predict treatment response in patients with advanced kidney cancer treated with TKIs. The current study included 62 patients with advanced kidney cancer (stages 3 and 4) that underwent a CT scan in the arterial phase from March 2016 to November 2020. Texture analysis was run on the largest cross-sectional area of the primary tumor from each CT scan. A total of three different models were built from radiomics features and clinical data to analyze them by logistic regression and determine whether they correlated with the response to TKI. A receiver operating characteristic curve analysis was performed in each model to calculate the area under the curve (AUC) and the 95% confidence interval (CI). Significant radiomics features and clinical variables were identified and then a clinical model was created (AUC=0.90; sensitivity 75%; specificity 82.35%; CI 95%, 0.78-1.00), a radiomic model (AUC=0.66; sensitivity 16.67%; specificity 89.47%, CI 95%, 0.45-0.87) and a combined model (AUC=0.94; sensitivity 83.33%; specificity 94.12%; CI 95%, 0.84-1.00). Overall, models based on clinical data and radiomics could anticipate response to systemic therapy with TKI in patients with advanced kidney cancer.
RESUMO
Purpose: To explore the potential of radiomics texture features as potential biomarkers to enable detection of the presence of BRAF mutation and prediction of 5-year overall survival (OS) in stage IV colorectal cancer (CRC). Materials and Methods: In this retrospective study, a total of 145 patients (mean age, 61 years ± 14 [standard deviation {SD}]; 68 female patients and 77 male patients) with stage IV CRC who underwent molecular profiling and pretreatment contrast material-enhanced CT scans between 2004 and 2018 were included. Tumor radiomics texture features, including the mean, the SD, the mean value of positive pixels (MPP), skewness, kurtosis, and entropy, were extracted from regions of interest on CT images after applying three Laplacian-of-Gaussian filters known as spatial scaling factors (SSFs) (SSF = 2, fine; SSF = 4, medium; SSF = 6, coarse) by using specialized software; values of these parameters were also obtained without filtration (SSF = 0). The Wilcoxon rank sum test was used to assess differences between mutated versus wild-type BRAF tumors. Associations between radiomics texture features and 5-year OS were determined by using Kaplan-Meier estimators using the log-rank test and multivariate Cox proportional-hazards regression analysis. Results: The SDs and MPPs of radiomic texture features were significantly lower in BRAF mutant tumors than in wild-type BRAF tumors at SSFs of 0, 4, and 6 (P = .006, P = .007, and P = .005, respectively). Patients with skewness less than or equal to -0.75 at an SSF of 0 and a mean of greater than or equal to 17.76 at an SSF of 2 showed better 5-year OS (hazard ratio [HR], 0.53 [95% confidence interval {CI}: 0.29, 0.94]; HR, 0.40 [95% CI: 0.22, 0.71]; log-rank P = .025 and P = .002, respectively). Tumor location (right colon vs left colon vs rectum) had no significant impact on the clinical outcome (log-rank P = .53). Conclusion: Radiomics texture features can serve as potential biomarkers for determining BRAF mutation status and as predictors of 5-year OS in patients with advanced-stage CRC.Keywords: Abdomen/GI, CT, Comparative Studies, Large BowelSupplemental material is available for this article.© RSNA, 2020.
Assuntos
Neoplasias Colorretais , Proteínas Proto-Oncogênicas B-raf , Idoso , Neoplasias Colorretais/diagnóstico por imagem , Neoplasias Colorretais/genética , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Mutação , Proteínas Proto-Oncogênicas B-raf/genética , Estudos Retrospectivos , Taxa de Sobrevida , Tomografia Computadorizada por Raios XRESUMO
AIM: To develop a CT predictor scale for the need for colectomy and to evaluate predictors of all-cause mortality within 30 days after diagnosis ofC. difficile infection (CDI). METHODS: We conducted a retrospective study of adult hospitalized patients whounderwent abdominal CT within 72 h of diagnosis of CDI. RESULTS: Presence of abnormal wall thickening in caecum (OR 8.0; CI 1.37-46.81; p = 0.021), transverse colon (OR 6.7; CI 1.15-35.60; p = 0.034), sigmoid colon (OR 12.6; CI 1.37-115.97; p = 0.025), pancolitis (OR 7.0; CI 1.36-36.01; p = 0.02) and bowel dilation (OR 16.5; CI 2.41-112.83; p = 0.004) predicted colectomy. With these values, a five parameter radiological scale from 0 to 24 was developed (sensitivity and NPV of 100%, cut-off of 6). Furthermore, wall thickening of caecum (OR 6.2; CI 1.06-35.57; p = 0.043), ascending colon (OR 12.0; CI 1.29-111.32; p = 0.029), descending colon (OR 17.0; CI 1.81-160.05; p = 0.013) and sigmoid (OR 10.2; CI 1.10-94.10; p = 0.041) independently predicted mortality within 30 days of CDI diagnosis. CONCLUSION: We designed a CT scale to predict colectomy, able to rule out the development of fulminant colitis and the need for surgical procedure. Patients with wall thickening of the caecum, ascending, descending or sigmoid colon were more likely to die within 30 days of CDI diagnosis.