RESUMO
Pre-lithiation via electrolysis, herein defined as electrolytic pre-lithiation, using cost-efficient electrolytes based on lithium chloride (LiCl), is successfully demonstrated as a proof-of-concept for enabling lithium-ion battery full-cells with high silicon content negative electrodes. An electrolyte for pre-lithiation based on γ-butyrolactone and LiCl is optimized using boron-containing additives (lithium bis(oxalato)borate, lithium difluoro(oxalate)borate) and CO2 with respect to the formation of a protective solid electrolyte interphase (SEI) on silicon thin films as model electrodes. Reversible lithiation in Si||Li metal cells is demonstrated with Coulombic efficiencies (CEff ) of 95-96% for optimized electrolytes comparable to 1 m LiPF6 /EC:EMC 3:7. Formation of an effective SEI is shown by cyclic voltammetry and X-ray photoelectron spectroscopy (XPS). electrolytic pre-lithiation experiments show that notable amounts of the gaseous product Cl2 dissolve in the electrolyte leading to a self-discharge Cl2 /Cl- shuttle mechanism between the electrodes lowering pre-lithiation efficiency and causing current collector corrosion. However, no significant degradation of the Si active material and the SEI due to contact with elemental chlorine is found by SEM, impedance, and XPS. In NCM111||Si full-cells, the capacity retention in the 100th cycle can be significantly increased from 54% to 78% by electrolytic pre-lithiation, compared to reference cells without pre-lithiation of Si.
RESUMO
Currently, little information has been published on the application of ternary eluent compositions in supercritical fluid chromatography for separating peptides. This work investigates the benefits of adding acetonitrile to methanol as the modifier. Three cyclic antibiotic peptides (bacitracin, colistin, and daptomycin) ranging between 1000 and 2000 Da were chosen as model substances. The ternary mixture of carbon dioxide, methanol, and acetonitrile is optimized to increase the resolution of the peptide's fingerprint. In addition, varying compositions of methanol and acetonitrile were found to change the elution order of the analytes, which is a valuable tool during method development. An individual gradient method using two Torus 2-PIC columns (each 100 × 3.0 mm, 1.7 µm), carbon dioxide, and a modifier consisting of acetonitrile/methanol/water/methanesulfonic acid (60:40:2:0.1, v:v:v:v) was optimized for each of the peptides. Subsequently, a generic method development protocol applicable to polypeptides is proposed.
Assuntos
Cromatografia com Fluido Supercrítico , Metanol , Metanol/química , Cromatografia com Fluido Supercrítico/métodos , Dióxido de Carbono/química , Peptídeos , Água/químicaRESUMO
The purity analysis of therapeutic peptides can often be challenging, demanding the application of more than a single analytical technique. Supercritical fluid chromatography nowadays is a promising alternative to reversed-phase liquid chromatography, providing orthogonal and complementary information. This study investigated its applicability for the separation of human insulin, its analogs and degradation products. A previously published method development protocol for peptides up to 2000 Da was successfully applied to the higher molecular weight insulins (6 kDa). A single gradient method was optimized for all insulins using a Torus DEA column (100 × 3.0 mm, 1.7 µm), carbon dioxide and a modifier consisting of methanol/acetonitrile/water/methanesulfonic acid (65:35:2:0.1, v/v/v/v). Consecutively, the crown ether 18-crown-6, which is well known to complex charged lysine sidechains and other amino functionalities, was added to the modifier to evaluate its impact on selectivity. A decreased retention and a shift in the elution order for the insulins were observed. An inverse effect on retention was found when combined with a neutral stationary phase chemistry (Viridis BEH).
Assuntos
Cromatografia com Fluido Supercrítico , Éteres de Coroa , Humanos , Insulina , Cromatografia com Fluido Supercrítico/métodos , Metanol/química , Dióxido de Carbono/químicaRESUMO
Various drug samples (N = 249; drug substances, tablets, capsules, solutions, crèmes, and more) from the European pharmaceutical market were collected since 2019 and analyzed for 16 nitrosamines (NAs). In 2.0% of the cases, NAs were detected. These findings included four active pharmaceutical ingredients already known for potential NA contamination: losartan (N-nitrosodimethylamine [NDMA] and N-nitrosodiethylamine, simultaneously), valsartan (NDMA), metformin (NDMA) and ranitidine (NDMA). The fifth new finding, which has not been reported yet, discovered contamination of a molsidomine tablet sample with N-nitrosomorpholine (NMor). The tablet contained 144% of the toxicological allowable intake for NMor. NMor was included in our screening from the beginning and is currently the focus of regulatory authorities, but was added to the guidelines only last year. Thus, it may not have been the focus of regulatory investigations for too long. Our results indicate that the majority of drug products in the market are nonhazardous in terms of patient safety and drug purity. Unfortunately, the list of individual affected products keeps growing constantly and new NA cases, such as molsidomine or nitrosated drug substances (nitrosamine drug substance-related impurities [NDSRI]), continue to emerge. We therefore expect nitrosamine screenings to remain a high priority.
Assuntos
Molsidomina , Nitrosaminas , Humanos , Prevalência , Relação Estrutura-Atividade , Dimetilnitrosamina , ComprimidosRESUMO
The application area of supercritical fluid chromatography expanded tremendously over the last years and more polar analytes such as biomolecules have become accessible. The growing interest in biopharmaceuticals and associated regulatory requirements demand alternative analytical tools. The orthogonal nature of supercritical fluid chromatography compared to reversed-phase liquid chromatography meets these needs and makes it a useful option during research and development. In this study, we present a systematic approach for the development of a supercritical fluid chromatography method for fingerprinting of tyrothricin, a complex therapeutic peptide covering a mass range from 1200 to 1900 Da. The substance was chosen due to the presence of cyclic and linear peptides and isomeric or highly similar amino acid sequences. Different column chemistries covering neutral, basic, and zwitterionic functionalities in combination with acidic, basic, and neutral additives were screened. Subsequently, Design-of-Experiments principles were utilized to perform optimization of the chromatographic parameters. The final mass spectrometry-compatible gradient method using a diol stationary phase, carbon dioxide, and a modifier consisting of methanol/water/methanesulfonic acid (100:2:0.1, v:v:v) was found to provide orthogonality and superior resolution to other methods published. Isomeric peptide compounds coeluting in reversed-phase liquid chromatography were resolved by applying the final method.
Assuntos
Cromatografia com Fluido Supercrítico , Dióxido de Carbono , Espectrometria de Massas , Metanol , PeptídeosRESUMO
Since June 2018, thousands of drug products from around the world had to be recalled due to the unexpected presence of nitrosamines (NAs). Starting with the pharmaceutical group of sartans, antidiabetic drugs, antihistamines, and antibiotics also became the subject of investigation. The occurrence of NAs has shown that pharmaceutical companies and regulatory agencies did not focus on these substances in the past during drug development. In this study, we incorporated a nitrosation assay procedure into high-resolution supercritical fluid chromatography (SFC)-mass spectrometry screening to test the potential of direct nitrosation of active pharmaceutical ingredients (APIs). The forced degradation study was performed with a four-fold molar excess of sodium nitrite, relative to the drug substance, at pH 3-4 for 4 h at 37°C. Chromatographic separation was performed on a porous graphitic carbon column by SFC. The mass analysis then focused on direct N-nitrosation or N-nitroso compounds (NOCs) formed after dealkylation. Substances (n = 67) from various pharmaceutical classes were evaluated and 49.3% of them formed NOCs, of which 21.2% have not yet been reported in the literature. In addition, for two APIs, which are known to form an unidentified NOC, the structure could be identified. A few substances also showed multiple NOCs and even N,N'-dinitroso-species. As NAs are carcinogens, they have to be eliminated or at least limited to prevent cancer in patients, who rely on these drugs. This study contributes a procedure that can be implemented in preapproval drug development and postapproval risk assessment to prevent unexpected findings in the future.
Assuntos
Desenvolvimento de Medicamentos , Compostos Nitrosos , Humanos , Compostos Nitrosos/análise , Compostos Nitrosos/química , Compostos Nitrosos/metabolismo , Medição de Risco , Relação Estrutura-AtividadeRESUMO
Photon-counting CT systems generally allow for acquiring multiple spectral datasets and thus for decomposing CT images into multiple materials. We introduce a prior knowledge-free deterministic material decomposition approach for quantifying three material concentrations on a commercial photon-counting CT system based on a single CT scan. We acquired two phantom measurement series: one to calibrate and one to test the algorithm. For evaluation, we used an anthropomorphic abdominal phantom with inserts of either aqueous iodine solution, aqueous tungsten solution, or water. Material CT numbers were predicted based on a polynomial in the following parameters: Water-equivalent object diameter, object center-to-isocenter distance, voxel-to-isocenter distance, voxel-to-object center distance, and X-ray tube current. The material decomposition was performed as a generalized least-squares estimation. The algorithm provided material maps of iodine, tungsten, and water with average estimation errors of 4% in the contrast agent maps and 1% in the water map with respect to the material concentrations in the inserts. The contrast-to-noise ratio in the iodine and tungsten map was 36% and 16% compared to the noise-minimal threshold image. We were able to decompose four spectral images into iodine, tungsten, and water.
RESUMO
Since the detection of nitrosamines (NA) in valsartan pharmaceuticals, over two years have passed. At present, the occurrence of NAs can be limited to a few drug substances and drug products, but it is already becoming apparent that the issue appears to be much bigger than initially thought. The impact on the global pharmaceutical market has been tremendous and the problem can be attributed mainly to uncritically adopted approval changes and the lack of suitable, modern analytical methods to detect those impurities in time. We hereby demonstrate how lifecycle management (LCM) can be used to develop and improve suitable and universal analytical methods within short time. The resulting SFC-MS/MS method is intended for a universal nitrosamine investigation in drug substances and drug products. Successful NA analysis was demonstrated for seven sartans, metformin, pioglitazone and ranitidine. Additionally, combination drug products, containing also amlodipine, hydrochlorothiazide, vildagliptin and sitagliptin, were analyzed successfully. The method achieved separation of 16 NAs in 4â¯min with a total run time of 11.5â¯min, utilizing a Supel Carbon porous graphitic carbon (PGC) column. Carbon dioxide together with 0.1% TFA in methanol as modifier were used as eluents and 0.35% formic acid in methanol as make-up solvent for mass spectrometric NA detection. By implementing LCM in this case study, development time was reduced and knowledge was implemented fast. At the same time, a high adaptability of this "vital" method was achieved, which makes it possible to implement the constantly changing regulatory requirements within the shortest possible time. Supplemental development data, according to the ICH guidelines Q8, Q12 and the proposed Q14 are disclosed, demonstrating the scientific Quality-by-Design (QbD) development approach, the "fitness for use" and the robustness of the analytical procedure. This method contributes to the still ongoing risk assessment process of the pharmaceutical industry and the regulatory agencies, in order to understand root causes of NA formation, maintain the drug supply and prevent drug shortage.