Factors influencing the effective dose associated with CBCT: a systematic review.

INTRODUCTION: Due to potential impact of the effects of ionizing radiation used in medical and dental examinations on public health in recent years, many studies are being conducted to quantify the radiation dose values, evaluate scanners, and indicate factors that could influence or reduce radiation doses. OBJECTIVES: This study aimed to evaluate, by a systematic review, the factors that influence the effective radiation dose associated with cone beam computed tomography and respective effects, and compared the effective dose of different cone beam computed tomography (CBCT) scanners with similar exposure parameters. MATERIALS AND METHODS: A search was conducted on five databases from 2007 to 2015. RESULTS: The search identified 741 abstracts, among which 44 eligible articles were retrieved in full text. Twenty-three studies met the inclusion criteria and were included. Additional copper filter was evaluated in one study, patient size in 2 studies, region of interest in 1 study, use of a thyroid shield in 2 studies, scan angle in 3 studies, exposure time in 10 studies, FOV diameter in 17 studies, FOV height in 17 studies, kV in 16 studies, mA in 18 studies, mAs in 13 studies, voxel in 8 studies, and resolution in 3 studies. When similar exposure parameters were evaluated, it was observed that CBCT scanner with lower effective dose was Kodak® 9000C 3D (mean 21.2 µSv) in selected studies. CONCLUSIONS: Thirteen factors were related to changes in the effective dose emitted by different scanners. More studies are needed to identify the image quality requirements in addition to measure the radiation. CLINICAL RELEVANCE: Studies that give more information for professionals who request and interpret the exams and for technicians who perform 3D images about effective radiation dose associated with CBCT are necessary.

Dentoskeletal changes induced by the Jasper jumper and the activator-headgear combination appliances followed by fixed orthodontic treatment.

INTRODUCTION: The aim of this study was to compare the dentoskeletal changes of patients with Class II Division 1 malocclusion treated with either the Jasper jumper appliance or the activator-headgear combination, both associated with fixed appliances. METHODS: The sample comprised 72 subjects with Class II Division 1 malocclusion divided into 3 groups: group 1 included 25 subjects treated with fixed appliances and the force modules of the Jasper jumper at an initial mean age of 12.72 years, group 2 included 25 subjects treated with the activator-headgear combination followed by fixed appliances at an initial mean age of 11.07 years, and group 3 included 22 untreated subjects at an initial mean age of 12.67 years. Initial cephalometric characteristics and dentoskeletal changes were compared with analysis of variance. RESULTS: Both experimental groups had similar dentoskeletal changes: restrictive effect on the maxilla, clockwise mandibular rotation and a slight increase in anterior face height, retrusion of the maxillary incisors, distalization of the maxillary molars, protrusion of the mandibular incisors, extrusion of the mandibular molars, and significant improvements of the maxillomandibular relationship, overjet, overbite, and the molar relationship. CONCLUSIONS: The effects of the Jasper jumper and the activator-headgear combination followed by fixed orthodontic appliances were similar in Class II malocclusion treatment.

Evaluation of the maximum tongue and lip pressure in individuals with Class I, II, or III Angle malocclusions and different facial types.

PURPOSE: To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types. METHODS: A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference. RESULTS: There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals. CONCLUSION: Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

Effect of Orthodontic Treatment on Tooth Autotransplantation: Systematic Review of Controlled Clinical Trials.

This systematic review was focused on evaluating tooth autotransplantation, considering its impacts on the teeth, bone, soft tissues, and aesthetics in orthodontic patients. A bibliographic search was conducted without limitations on year of publication or language in the databases of PubMed, Web of Science, Scopus, Medline Complete, Cochrane, Clinical Trials, and Trials Central. For triage of articles, indications, surgical planning, orthodontic movement, risk factors for treatment, and long-term follow-ups were considered. For outcomes, the results with reference to teeth, alveolar bone, periodontal tissues, and esthetic satisfaction were considered. Risk of bias was evaluated using the methodological index for nonrandomized studies-MINORS. The results showed 10 controlled clinical trials, and no randomized clinical trials were found. The selected studies included 715 patients and 934 autotransplanted teeth among which there were premolars, molars, and anterior teeth evaluated in the long term, indicating that orthodontics associated with autotransplantation indicated a result that was generally clinically acceptable. The quality of the set of evidence was considered medium due to the presence of different methodological problems, risk of bias, and significant heterogeneity in the evaluated studies. There was a sufficient body of evidence that justified autotransplantation in patients who needed orthodontic movement. In teeth, there was an increase in root resorption influenced by orthodontics, but without impacting on the general clinical result in the long term. Bone and periodontal tissue do not appear to be affected by orthodontics. The patient's aesthetic satisfaction was not considered in the studies.

Comparison of the accuracy of virtual and direct bonding of orthodontic accessories.

INTRODUCTION: Conventional direct and indirect bonding techniques fail to obtain the ideal bracket position. OBJECTIVE: To compare the accuracy of virtual and conventional direct bonding of orthodontic accessories. METHODS: A single virtual configuration (dental mannequin with Class I malocclusion) served as basis for generating the reference model (treated virtually) and the intervention models (10 digital models and 10 solid models, obtained by means of prototyping). A total of 560 teeth were then equally distributed between a group of orthodontists (Group I, direct bonding; and Group II, virtual bonding), working in two different time intervals. The individual positions of the accessories were measured after three-dimensional superimposition with customized software. The Student's-t test for paired samples, and Chi-square tests were used for statistical analysis, both at the level of significance of 5%. RESULTS: In comparison of the errors in raw values, there were significant differences only in the vertical (p< 0.001) and horizontal dimensions (p< 0.001). Considering the groups of ranges by clinical limits of the deviations, these differences were significant in the three dimensions, vertical (p< 0.001), horizontal (p= 0.044) and angular (p= 0.044). CONCLUSION: Virtual bonding made it possible to obtain more precise/accurate positioning of the orthodontic accessories. The potential accuracy of this method brings new perspectives to refining the indirect bonding protocols.

Influence of heat treatment on the mechanical properties of CrNi stainless steel orthodontic wires.

INTRODUCTION: The heat treatment of stainless steel wires is a routine clinical procedure adopted by many dentists in order to relieve the stress caused after performing bends in the archwire. OBJECTIVE: This study aimed to evaluate the influence of heat treatment of stainless steel archwires with a rectangular section of 0.016 x 0.022'-in. METHODS: For analysis of the dimensional stability, the anterior and posterior dimensions of forty 0.016 x 0.022-in stainless steel orthodontic archwires without heat treatment and 30 days after heat treatment were evaluated. For analysis of the mechanical properties, 12 stainless steel wire segments with the same rectangular section without heat treatment and 30 days after heat treatment were tested through tensile strength and strain tests. To evaluate if there were differences between the anterior and posterior dimensions, the results were analyzed by the Student's t-test. To compare the tensile strength and strain between the groups, the ANOVA test was used. The level of significance adopted was 95% (p< 0.05). RESULTS: The heat treatment did not stop the expansion of archwires 30 days after their preparation, and there was no statistical difference in the tensile strength and strain tests with and without heat treatment. CONCLUSION: From the findings of this study, it can be conclude that the mechanical behavior of heat-treated stainless steel archwires is similar to that of archwires not subjected to heat treatment.

Occlusal outcomes and efficiency of 1- and 2-phase protocols in the treatment of Class II Division 1 malocclusion.

INTRODUCTION: The purpose of this study was to compare the occlusal outcomes and the efficiency of 1-phase and 2-phase treatment protocols in Class II Division 1 malocclusions. Treatment efficiency was defined as a change in the occlusal characteristics in a shorter treatment time. METHODS: Class II Division 1 subjects (n = 139) were divided into 2 groups according to the treatment protocol for Class II correction. Group 1 comprised 78 patients treated with a 1-phase treatment protocol at initial and final mean ages of 12.51 and 14.68 years. Group 2 comprised 61 patients treated with a 2-phase treatment protocol at initial and final mean ages of 11.21 and 14.70 years. Lateral cephalometric radiographs were taken at the pretreatment stage to evaluate morphological differences in the groups. The initial and final study models of the patients were evaluated by using the peer assessment rating index. Chi-square tests were used to test for differences between the 2 groups for categorical variables. Variables regarding occlusal results were compared by using independent t tests. A linear regression analysis was completed, with total treatment time as the dependent variable, to identify clinical factors that predict treatment length for patients with Class II malocclusions. RESULTS: Similar occlusal outcomes were obtained between the 1-phase and the 2-phase treatment protocols, but the duration of treatment was significantly shorter in the 1-phase treatment protocol group. CONCLUSIONS: Treatment of Class II Division 1 malocclusions is more efficient with the 1-phase than the 2-phase treatment protocol.

Evaluation of the maximum tongue and lip pressure in individuals with Class I, II, or III Angle malocclusions and different facial types / Avaliação da pressão máxima da língua e dos lábios em indivíduos com má oclusão Classe I, II e III de Angle e diferentes padrões faciais

ABSTRACT Purpose To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types. Methods A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference. Results There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals. Conclusion Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

RESUMO Objetivo comparar a pressão máxima anterior e posterior da língua, a resistência da língua e a pressão labial em indivíduos com más oclusões Classe I, II e III e diferentes tipos faciais. Método foi realizado um estudo analítico observacional transversal em 55 indivíduos (29 homens e 26 mulheres) com idades entre 18 e 55 anos. Os participantes foram divididos em grupos de acordo com a classificação de Angle para má oclusão (Classe I, II e III) e tipo facial. A pressão máxima anterior e posterior da língua, a resistência da língua e a pressão máxima dos lábios foram medidas usando o IOPI (Iowa Oral Performance Instrument). Para determinar o tipo facial, a análise cefalométrica foi realizada utilizando como referência a análise Ricketts VERT. Resultados não houve diferença estatisticamente significativa ao comparar a pressão máxima das regiões anterior e posterior da língua, a pressão máxima dos lábios ou a resistência da língua nos diferentes tipos de má oclusão. A pressão máxima posterior da língua foi menor em indivíduos com tipo facial vertical do que nos indivíduos mesofaciais. Conclusão a pressão de língua e lábios, assim como a resistência de língua em adultos não foi associada ao tipo de má oclusão. No entanto, existe uma associação entre o tipo facial e a pressão posterior da língua.

Stability of Class II, division 1 treatment with the headgear-activator combination followed by the edgewise appliance.

This study assessed the stability of the headgear-activator combination treatment, followed by edgewise mechanotherapy, 5.75 years after treatment. The experimental group consisted of 23 patients who were evaluated during treatment and after treatment. Two compatible control groups consisting of 15 Class II, division 1 patients and 24 normal occlusion individuals were used. This enabled us to evaluate the changes during treatment and after treatment, respectively. Results showed that the anteroposterior dentoalveolar changes and the maxillary and the mandibular positions remained stable in the long term. However, there was a slight relapse of the maxillomandibular relationship probably because the maxilla resumed its normal development and the mandibular growth rate was smaller than in the control group. The overbite demonstrated a statistically significant relapse that was directly proportional to the amount of its correction. There were low but significant inverse correlations between the changes in Go-Gn during and after treatment. These included the uprighting of the maxillary incisors, labial tipping of the mandibular incisors, and the amount of molar relationship correction during treatment and their stability. Active retention time, length of posttreatment period, initial Class II malocclusion severity (ANB and Wits), and initial molar relationship did not present any correlation with molar relationship and overjet relapse. However, the initial overjet presented a low but statistically significant correlation with molar relationship relapse and overjet relapse.

Treatment effects of the Jasper Jumper and the Bionator associated with fixed appliances.

BACKGROUND: The aim of this study was to evaluate the effects of Class II malocclusion treatment with the Jasper Jumper and the Bionator, associated with fixed appliances. METHODS: The sample comprised 77 young individuals divided into 3 groups: Group 1 consisted of 25 patients treated with the Jasper Jumper appliance associated with fixed appliances for a mean period of 2.15 years; group 2 had 30 patients, treated with the Bionator and fixed appliances, for a mean treatment time of 3.92 years; and the control group included 22 subjects followed for a mean period of 2.13 years. The initial and final lateral cephalograms of the patients were evaluated. Intergroup comparison at the initial stage and of the treatment changes were performed by analysis of variance. RESULTS: Their effects consisted in a restrictive effect on the maxilla, a slight increase in anterior face height, retrusion and extrusion of the maxillary incisors, labial tipping and protrusion of the mandibular incisors in both groups and intrusion with the Jasper Jumper appliance, maxillary molar distalization with the Jasper Jumper, extrusion and mesialization of the mandibular molars, both appliances provided significant improvement of the maxillomandibular relationship, overjet, overbite and molar relationship. CONCLUSIONS: The effects of both appliances in class II malocclusion treatment are similar; however, treatment with the Jasper Jumper was shorter than with the Bionator.

Influence of heat treatment on the mechanical properties of CrNi stainless steel orthodontic wires

ABSTRACT Introduction: The heat treatment of stainless steel wires is a routine clinical procedure adopted by many dentists in order to relieve the stress caused after performing bends in the archwire. Objective: This study aimed to evaluate the influence of heat treatment of stainless steel archwires with a rectangular section of 0.016 x 0.022'-in. Methods: For analysis of the dimensional stability, the anterior and posterior dimensions of forty 0.016 x 0.022-in stainless steel orthodontic archwires without heat treatment and 30 days after heat treatment were evaluated. For analysis of the mechanical properties, 12 stainless steel wire segments with the same rectangular section without heat treatment and 30 days after heat treatment were tested through tensile strength and strain tests. To evaluate if there were differences between the anterior and posterior dimensions, the results were analyzed by the Student's t-test. To compare the tensile strength and strain between the groups, the ANOVA test was used. The level of significance adopted was 95% (p< 0.05). Results: The heat treatment did not stop the expansion of archwires 30 days after their preparation, and there was no statistical difference in the tensile strength and strain tests with and without heat treatment. Conclusion: From the findings of this study, it can be conclude that the mechanical behavior of heat-treated stainless steel archwires is similar to that of archwires not subjected to heat treatment.

RESUMO Introdução: o tratamento térmico de fios de aço inoxidável é um procedimento clínico rotineiro adotado por muitos cirurgiões-dentistas para aliviar o estresse causado após a confecção de dobras no fio. O presente estudo avaliou a influência do tratamento térmico em fios de aço inoxidável com secção retangular de 0,016'' x 0,022''. Métodos: para análise da estabilidade dimensional, foram avaliadas as dimensões anteriores e posteriores de 40 arcos ortodônticos de aço inoxidável de 0,016'' x 0,022'' sem tratamento térmico e 30 dias após o tratamento térmico. Para análise das propriedades mecânicas, 12 segmentos de fio de aço inoxidável com a mesma secção retangular sem tratamento térmico e 30 dias após o tratamento térmico foram analisadas por testes de resistência à tração e tensão. Para verificar se houve diferenças entre as dimensões anteriores e posteriores, os resultados foram analisados pelo teste t de Student. Para comparar a resistência à tração e tensão entre os grupos, foi utilizado o teste ANOVA. O nível de significância adotado foi 95% (p< 0,05). Resultados: o tratamento térmico não interrompeu a expansão dos fios 30 dias após seu preparo, e não houve diferença estatística nos testes de resistência à tração e tensão com e sem o tratamento térmico. Conclusão: pelos achados desse estudo, conclui-se que o comportamento mecânico de fios submetidos a tratamento térmico é semelhante ao de fios de aço não submetidos ao tratamento térmico.

Long-term stability of maxillary anterior alignment in non-extraction cases.

OBJECTIVE: The purpose of this retrospective study was to evaluate long-term stability of maxillary incisors alignment in cases submitted to non-extraction orthodontic treatment. METHODS: The sample comprised 23 patients (13 female; 10 male) at a mean initial age of 13.36 years (SD = 1.81 years), treated with fixed appliances. Dental cast measurements were obtained at three different time points (T1 - pretreatment, T2 - posttreatment and T3 - long-term posttreatment). Variables assessed in maxillary arch were Little Irregularity Index, intercanine, interpremolar and intermolar widths, arch length and perimeter. The statistical analysis was performed by one-way ANOVA and Tukey tests when necessary. Pearson' correlation coefficients were used to investigate possible associations between the evaluated variables. RESULTS: There was no significant change in most arch dimension measurements during and after treatment, however, during the long-term posttreatment period, it was observed a significant maxillary incisors crowding relapse. CONCLUSIONS: The maxillary incisors irregularity increased significantly (1.52 mm) during long-term posttreatment. None of the studied clinical factors demonstrated to be predictive of the maxillary crowding relapse.

Influence of fixed appliances on two-phase orthopedic-orthodontic treatment

Aim: The purpose of this retrospective study was to investigate the effects of phase 2 with fixed appliances, after phase 1 Bionator treatment of Class II division 1 malocclusion, as compared to a matching control group. Methods: The experimental group consisted of 20 patients who were evaluated after orthodontic treatment with fixed appliances subsequently to functional therapy with the Bionator in phase 1. A control group consisting of 20 Class II, division 1 individuals. Results: During phase 1 there was significant forward growth restriction in the maxillary complex, improvement of the maxillomandibular relationship and decrease in facial convexity. There was also significant reduction of the maxillary incisor proclination and protrusion, protrusion of the mandibular incisors, and vertical development of the mandibular molars. The overjet was significantly reduced and the molar relationship was significantly improved. Treatment during phase 2, with fixed appliances, resulted in significant maxillary forward growth restriction and facial convexity reduction. Conclusion: Major Class II skeletal and dentoalveolar anteroposterior correction was obtained during phase 1, with the Bionator. Phase 2, with fixed appliances only produced a significant maxillary forward growth restriction and facial convexity reduction, without any significant dentoalveolar change

Tratamento compensatório da má oclusão de Classe III esquelética com mini-implante ­ relato de caso / Compensatory treatment of skeletal Class III malocclusion with miniscrews ­ case report

Resumo O tratamento compensatório da má oclusão de Classe III esquelética representa uma opção para pacientes adultos que não desejam se submeter ao tratamento ortodôntico-cirúrgico e desejam melhorias na oclusão e estética facial. O sucesso do tratamento compensatório da má oclusão de Classe III depende de um correto diagnóstico e planejamento de tratamento que considere a gravidade das discrepâncias verticais e anteroposteriores e o padrão de crescimento do paciente. O objetivo deste estudo é apresentar o tratamento de um paciente adulto com má oclusão esquelética moderada de Classe III e protrusão mandibular tratada com ancoragem esquelética e sliding jig ancorado em mini implantes e elásticos intermaxilares de Classe III. Os resultados alcançados levaram a uma melhora significativa no perfil do paciente com a estética do sorriso. Relações de molares e caninos de Classe I foram alcançadas. O sucesso na correção da discrepância oclusal anteroposterior e a correção estética de uma má oclusão de Classe III através do tratamento compensatório com elásticos de Classe III e mini implantes podem ser alcançados se a adesão do paciente for satisfatória. (AU)

Abstract Compensatory treatment of skeletal Class III malocclusion represents an option for adult patients who do not want to undergo orthodontic-surgical treatment and wish occlusion and facial aesthetics improvements. The success of the compensatory treatment of Classe III malocclusion depend on a correct diagnosis and treatment planning that considers the severity of vertical and anteroposterior discrepancies and the patient growth pattern. The aim of this study is to present the treatment of an adult patient with moderate skeletal Class III malocclusion and mandibular protrusion treated with skeletal anchorage whit miniscrew-anchored sliding jig and Class III intermaxillary elastics. The results achieved led to a significant improvement in the patient profile whit smiles esthetics. Class I molar and canine relationships were achieved. Successful on the correction of the anteroposterior occlusal discrepancy and esthetic correction of a Class III malocclusion through compensatory treatment with Class III elastics and miniscrew can be achieved if patient's compliance is satisfactory. (AU)

Abordagem ortodôntica de má oclusão originada de uma autointervenção ­ relato de caso / Orthodontic approach to malocclusion originating from a self-intervention ­ case report

Resumo A automedicação, uma conduta realizada pelos pacientes com o objetivo de aliviar alguns sintomas de desconforto, é extremamente condenada pelos profissionais da saúde pelas possíveis consequências negativas que este ato pode causar, podendo gerar sequelas graves e irreversíveis. Tal situação não é diferente na Odontologia, quando os pacientes realizam procedimentos domésticos para camuflar um problema odontológico, principalmente quando há um comprometimento importante da estética do sorriso. O objetivo do presente artigo é relatar uma abordagem de tratamento multidisciplinar, a qual o ortodontista teve papel fundamental na correção dos efeitos adversos na oclusão causados pela autointervenção de uma paciente, que utilizou de artifícios domésticos para restabelecer de forma emergencial sua estética do sorriso. (AU)

Abstract Self-medication, a procedure performed by patients to relieve some symptoms of discomfort, is extremely disapproved of by health professionals for the possible negative consequences that this act can cause, which can generate serious and irreversible sequelae. Such a situation is no different in dentistry, when patients perform domestic procedures to camouflage a dental problem, especially when there is an important commitment to the smile's aesthetics. The aim of this article is to report a multidisciplinary treatment approach, one in which the orthodontist played a relevant role in correcting the adverse effects of the occlusion caused by the self-intervention of a patient, who used domestic devices to urgently restore her smile aesthetics (AU)

Comparação da expressão de torque entre fios de níquel titânio convencionais e estéticos / Comparison of torque expression between aesthetic and conventional nickel wires Leniana

Resumo O propósito deste estudo foi comparar a magnitude de torque de fios retangulares de níquel titânio (NiTi) estéticos e convencionais submetidos aos testes de torção. Foram testados fios comerciais de NiTi pré-contornados estéticos e convencionais de 4 marcas comerciais (American Orthodontics, Eurodonto, Orthometric e TP Orthodontics) de secção transversal 0.016" x 0.022". Os testes foram realizados em máquina de torção com rotação de 0° a 90° e foi analisado o comportamento na desativação em 20° e no torque máximo a 90°. Aos 20° no descarregamento, os fios estéticos e convencionais da American Orthodontics tiveram maior expressão de torque, enquanto os fios da Eurodonto convencional e TP Orthodontics estético apresentaram menor torque. No torque máximo a 90°, os fios que tiveram maior expressão foram da TP Orthodontics convencional e American Orthodontics estético, e os fios de menor torque foram da Eurodonto convencional e Orthometric estético. Não foram encontradas diferenças estatisticamente significativas quando os fios estéticos foram comparados entre si. Ao comparar fios estéticos e convencionais de mesma marca comercial, a única que apresentou diferença estatisticamente significativa foi a Eurodonto. Concluiu-se que, quando comparados os torques dos fios estéticos e convencionais de mesma marca, não foram encontradas diferenças estatisticamente significativas, exceto o da marca Eurodonto, que apresentou menor torque para os fios convencionais. (AU)

Abstract The purpose of this study was to compare the torque magnitude of aesthetic and conventional nickel titanium (NiTi) rectangular wires subjected to torsion tests. Commercial esthetic and conventional pre-contoured NiTi wires from 4 brands (American Orthodontics, Eurodonto, Orthometric, and TP Orthodontics) with a cross-section of 0.016" x 0.022" were tested. The tests were carried out in a torsion machine with rotation from 0º to 90° and the behavior in deactivation at 20° and at a maximum torque at 90° was analyzed. At 20° in unloading, American Orthodontics esthetic and conventional wires had higher torque, while conventional Eurodonto and TP Orthodontics esthetic wires had lower torque. At maximum torque (90°), the wires that had the highest torque were conventional TP Orthodontics and aesthetic American Orthodontics, and the wires with the lowest torque were conventional Eurodonto and aesthetic Orthometric. No statistically significant differences were found when the aesthetic threads were compared to each other. When comparing aesthetic and conventional wires from the same brand, the only one that showed a statistically significant difference was Eurodonto. It was concluded that, when comparing the torques of the aesthetic and conventional wires of the same brand, no statistically significant differences were found, except for the Eurodonto brand, which presented lower torque for the conventional wires. (AU)

Class II malocclusion treatment using Jasper Jumper appliance associated to intermaxillary elastics: a case report.

INTRODUCTION: Skeletal, dental and profile discrepancies can be amended by using functional orthodontic appliances. OBJECTIVE: This study is a report of the treatment of a patient, 11 years and 4 months old, with Class II, division 1, malocclusion, convex profile, protrusion of upper incisors, pronounced overjet and overbite, and mild crowding. METHODS: The patient was treated with a Jasper Jumper associated to fixed appliances for 6 months and Class II intermaxillary elastics (3/16-in) during the last 4 months. After debonding, a Hawley retainer was used during daytime and a modified Bionator for night use during one year. In the lower dental arch a bonded lingual retainer was used. This treatment combination improved the profile, as well as the overjet, overbite and molar relation. RESULTS: There was clockwise mandibular rotation and increase of lower anterior facial height. The lower incisors were protruded and extruded and the lower molars were extruded. The centric occlusal relation was checked and it was coincident to the maximum usual intercuspation. CONCLUSIONS: It was demonstrated that the Jasper Jumper is an efficient alternative to Class II malocclusion treatment, providing improvement in the facial profile, although the changes are more dentoalveolar than skeletal.

Validação de um software para a estimação da idade óssea por meio das vértebras cervicais / Validation of software for a bone age patient through the cervical vertebrae

Objetivo: o objetivo deste estudo é a validação de um software (Easy Age) para avaliar a maturação óssea por meio das vértebras cervicais, demonstrando sua aplicabilidade e reprodutibilidade. Métodos: a amostra constou de 500 telerradiografias em norma lateral de pacientes de ambos os sexos, dos 7 aos 15 anos de idade, que foram examinadas por 3 avaliadores, duas vezes para o método visual e duas vezes com o software. Resultados: para avaliar a concordância inter e intra-examinador, aplicou-se o teste de concordância Kappa, que mostrou um nível substancial de concordância para a avaliação visual das vértebras cervicais, enquanto que para a avaliação das vértebras cervicais por meio do software, mostrou um nível quase perfeito de concordância para todos os avaliadores. No teste de Friedman, aplicado para comparar as avaliações entre o 1º e o 2º exame visual e entre o 1º e o 2º exame por meio do software, não houve diferenças significativas. Para validação do software foi realizada a comparação entre os resultados obtidos pelo método visual e pelo software, pelo teste de correlação de Spearman, e os valores entre o 1º e o 2º exame visual e entre o 1º e o 2º exame software mostraram correlação forte, estatisticamente significante, entre as medições dos exames visuais e do software. Conclusão: conclui-se assim que o software é válido e melhorou a aplicabilidade e a reprodutibilidade do método de estimação da idade óssea.(AU)

Aim: The present study aimed to validate a software (Easy Age) to assess skeletal maturation by cervical vertebrae, demonstrating its applicability and reproducibility. Methods: For this, the sample consisted of 500 lateral radiographs of patients of both genders, from 7 to 15 years of age, who were examined by three evaluators, twice for the visual method and twice with the software. To evaluate the inter- and intra-examiner agreement, the Kappa test was applied, which showed a substantial level of agreement for the visual assessment of the cervical vertebrae, while the evaluation of the cervical vertebrae through the software showed a level that presented almost perfect agreement for all evaluators. Friedman's test was applied to compare the ratings between the 1st and 2nd visual examinations and between the 1st and 2nd examinations using the software, which presented no significant differences. To validate the software, a comparison was performed between the results obtained by the visual method and those obtained by the software, using the Spearman correlation test. Results: The results showed a strong, statistically significant correlation between the measurements from the visual examination and those from the software evaluation. Conclusion: It can therefore be concluded that the software is valid and improved the applicability and reproducibility of the method of estimating skeletal age.(AU)

Avaliação da resistência à deformação plástica dos fios redondos de níquel-titânio / Evaluation of plastic deformation resistance of nickeltitanium round wires

Resumo As ligas de níquel-titânio (NiTi) possuem elasticidade elevada sem sofrer deformações plásticas permanentes, sendo amplamente indicadas nas primeiras fases do tratamento ortodôntico. O Objetivo deste estudo é avaliar a resistência de fios ortodônticos de NiTi termoativados em relação à deformação plástica. Foram avaliados fios de 6 marcas comerciais (GAC®, Morelli®, American Orthodontics®, Infinity®e 3M®). Primeiramente a partir de modelos prototipados foi simulada a relação entre deformação plástica e deflexão pela distância interbráquetes em 4 níveis de força a 37°C por 30 dias. Um segundo experimento foi realizado através da análise de fotografias padronizadas com diagramas observando o antes e depois de aplicada uma deformação ao fio a diferentes temperaturas. Os resultados do primeiro teste mostraram que todas as marcas comerciais testadas retornaram a sua forma original após sofrer deflexão por 30 dias. O segundo experimento mostrou que os fios da marca GAC® e American Orthodontics® não apresentaram diferenças estatisticamente significativas comparando as medidas do fio antes da deformação, deformado e após aquecimento (fio aquecido). Já os fios das marcas 3M®, Orthometric® e Infinity®, Morelli apresentaram diferenças significantes entre os fios novos e os fios deformados, e entre os fios deformados e os fios aquecidos, porém, não houve diferenças significantes entre os fios novos e aquecidos. Concluiu-se que nenhum fio, em nenhuma magnitude de deflexão aplicada, sofreu deformação plástica (permanente). Assim, todos os fios das marcas comerciais testadas foram considerados satisfatórios para a prática clínica da Ortodontia no que diz respeito à resistência a deformação plástica. (AU)

Abstract Nickel-titanium (NiTi) alloys have high elasticity without suffering permanent plastic deformations, widely indicated in the early stages of orthodontic treatment. This study aims to evaluate the heat-activated NiTi orthodontic wires' resistance to plastic deformation. The wire from 6 commercial brands (GAC®, Morelli®, American Orthodontics®, Infinity®, and 3M®) was evaluated first from prototype models, simulating the relationship between plastic deformation and deflection by the inter bracket distance at four levels of force at 37° C for 30 days. A second experiment was carried out by analyzing standardized photographs with diagrams observing the before and after deformation was applied to the wire at different temperatures. The first test showed that all tested trademarks returned to their original shape after deflecting for 30 days. The second experiment showed that GAC® and American Orthodontics® wires did not present statistically significant differences comparing the wire measurements before deformed deformation and after heating (heated wire). On the other hand, 3M®, Orthometric® and Infinity®, Morelli wires showed significant differences between new and deformed wires and between twisted and heated wires; however, there were no significant differences between new and heated wires. It was concluded that no wire, at any magnitude of applied deflection, suffered plastic (permanent) deformation. Thus, all wires of the commercial brands tested were considered satisfactory for the clinical practice of Orthodontics in terms of resistance to plastic deformation.(AU)