RESUMO
In this work, we have combined nanosphere lithography with electrochemical reduction of aryldiazonium salts to elaborate nanostructured mixed layers of organic materials. The strategy consists first in the deposition of a close-packed hexagonal monolayer of microbeads used as a mask for the electroreduction of a first aryldiazonium salt. After removing the beads, an ultrathin organic layer with holes remains. Then, a second aryldiazonium salt is electrochemically reduced selectively inside the holes. The relative thickness of the two deposited materials can be changed, leading to mixed layers of different topographies. Moreover, using diazoniums with complementary redox properties, a modified bifunctional electrode acting as a filter for electron transfer with a low potential gap has been obtained. Such layers are similar to low-band-gap organic semiconductors that can be easily n or p doped. Despite this analogy, the oxidation and reduction of redox probes in solution on such nanostructured surfaces occur on completely separated areas of the mixed layer.
RESUMO
A new heteroleptic polypyridyle Ru(II) complex was synthesized and deposited on surface by the diazonium electroreduction process. It yields to the covalent grafting of a monolayer. The functionalized surface was characterized by XPS, electrochemistry, AFM, and STM. A precise organization of the molecules within the monolayer is observed with parallel linear stripes separated by a distance of 3.8 nm corresponding to the lateral size of the molecule. Such organization suggests a strong cooperative process in the deposition process. This strategy is an original way to obtain well-controlled and stable functionalized surfaces for potential applications related to the photophysical properties of the grafted chromophore. As an exciting result, it is the first example of a self-organized monolayer (SOM) obtained using diazonium electroreduction.
RESUMO
This paper describes the effective fabrication of an inverse opal (IO) structure for plasmon-induced hyperthermia applications using silver nanoparticles (AgNPs) doped in a conducting polymer of poly(3,4-ethylene dioxythiophene) (PEDOT). Indium tin oxide (ITO) substrates were firstly modified electrochemically by a layer of the inverse opal structure of PEDOT (IO-PEDOT). These as-prepared electrodes were subsequently used as working electrodes for electrodepositing AgNPs. The presence of plasmonic AgNPs doped inside a polymer network caused the hybrid of IO-PEDOT and AgNPs to generate significantly more heat than thin-film PEDOT, thin-film PEDOT/AgNPs, and IO-PEDOT under 532 nm laser irradiation. This is attributed to the synergistic effect of the large active area inverse opal structure and doped AgNPs, which exhibit more thermal energy and heat faster than the individual component structures. These findings point to a wide range of potential applications for hybrid IO-PEDOT/AgNPs in hyperthermia treatment.
RESUMO
This work investigates the structure, optical and electrical conductivity properties of BaTi1-x Co x O3 (0≤ x ≤0.1) ceramics prepared by the hydrothermal method. The X-ray diffraction and Raman scattering analysis demonstrates that the prepared samples have a single-phase tetragonal structure with P4mm symmetry. The UV-vis diffuse reflectance spectrum confirms the influence of Co concentration on the direct optical band gap of BaTi1-x Co x O3 ceramics. The optical band gap shifts from 3.14 eV to 3.44 eV as the Co concentration increases from 0 to 0.1. The dielectric constant increases with the depletion of frequency according to the Maxwell-Wagner and Koops model. The AC conductivity versus frequency curve indicates that the conduction mechanism is determined by using the correlated barrier hopping (CBH) model. The Cole-Cole plot of the complex impedance was investigated for the prepared samples. The compounds showed dielectric relaxation of the non-Debye type.
RESUMO
This paper describes a rapid bottom-up approach to selectively functionalize gold nanoparticles (AuNPs) on an indium tin oxide (ITO) substrate using the plasmon confinement effect. The plasmonic substrates based on a AuNP-free surfactant were fabricated by electrochemical deposition. Using this bottom-up technique, many sub-30 nm spatial gaps between the deposited AuNPs were randomly generated on the ITO substrate, which is difficult to obtain with a top-down approach (i.e., E-beam lithography) due to its fabrication limits. The 4-Aminodiphenyl (ADP) molecules were grafted directly onto the AuNPs through a plasmon-induced reduction of the 4-Aminodiphenyl diazonium salts (ADPD). The ADP organic layer preferentially grew in the narrow gaps between the many adjacent AuNPs to create interconnected AuNPs. This novel strategy opens up an efficient technique for the localized surface modification at the nanoscale over a macroscopic area, which is anticipated to be an advanced nanofabrication technique.
RESUMO
Surface grafting from diazonium solutions triggered by localized surface plasmon has been investigated. An organic layer that is 20-30 nm thick is easily grafted onto gold nanoparticles (AuNPs) by visible-light illumination in a few minutes without any reducing agent or molecular photocatalyst. Grafting depends on the wavelength and polarization of the incident light. As a consequence, the orientation of the growth of the layer deposited on the AuNPs can be controlled by polarized light. Grafting is also highly enhanced between adjacent AuNPs or at the corners of triangular AuNPs, that is, in plasmonic hot spots. These results clearly demonstrate plasmon enhancement and strongly suggest that the transfer of hot electrons from the excited plasmonic NPs to the diazonium is the main mechanism. They also confirm that localized surface plasmon resonance can induce nanolocalized electrochemical reactions, thus contributing to the field of "plasmonic electrochemistry".
RESUMO
A plasmonic molecular electronic device, consisting of poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires bridging an ultramicroelectrode and an indium tin oxide (ITO) substrate covered by gold nanoparticles (Au NPs), has been developed. Light irradiation of this device has a dramatic impact on its conductance. Polymer strands, maintained electrochemically in their oxidized, conducting state, reversibly switch to their insulating state upon irradiation by visible-wavelength light, resulting in a sharp decrease in the conductance. The high-conductance state is restored when the light is turned off. Switching depends on the wavelength and the intensity of the incident light. It is due to reversible reduction of the nanosized region of PEDOT nanowires in contact with a gold NP and is attributed to plasmon-induced hot-electron injection into the PEDOT. The high/low conductance ratio can be as great as 1000, and switching requires low light intensity (220 W/m2). These results could open the way to the design of a new family of optoelectronic switches.
RESUMO
Poly(ethylenedioxythiophene) (PEDOT) films were electrodeposited galvanostatically from an EDOT/sodium dodecyl sulfate solution in water, through a carboxylated polystyrene template monolayer self-assembled on ITO, after which the template was dissolved away in tetrahydrofuran. Analysis of the films by scanning electron microscopy and atomic force microscopy reveals large-area PEDOT honeycomb structures. The morphology of these structures was varied electrochemically, as the effective thickness and, surprisingly, the shape of the honeycomb arrangement depend on the polymerization time. Using nanospheres of 1 µm diameter and charge densities between 12 and 30 mC cm(-2) for electrodeposition generates PEDOT hexagons with very thin rectilinear walls 30-35 nm-thick and 800 nm-long, whereas at higher charge densities, circular bowls are created with 60 nm walls separating adjacent bowls; triangular areas as small as 0.02 µm(2) develop at the intersection of three nanospheres. These morphologies are specific to the use of carboxylated PS spheres and a water-based solution with a surfactant in the galvanostatic electrodeposition mode. Using smaller nanospheres, i.e. 500 nm in diameter, makes it possible to reach PEDOT hexagons with rectilinear walls as small as 11-17 nm-thick and 300 nm-long; circular bowls with 25-35 nm walls separating adjacent bowls and triangular areas as small as 0.003 µm(2) can also be generated. The wettabilities of the surfaces depend markedly on the pore depth of the PEDOT nanostructure, with contact angles going from 82° to 130° with increasing pore size. Finally these nanostructured PEDOT electrodes were used in Grätzel-type dye-sensitized solar cells (DSSCs) as Pt-free counter-electrodes, with an increase in the yield from 7.0 (bulk PEDOT) to 8.1%.
RESUMO
The study carried out on 30 male patients myocardial ischemia, aged 67.4 in average. Patients were treated by Dan Sam Tam That (DSTT) 6 tablets daily in a course of 4 weeks in the Military Central Hospital 108. DSTT has relief the chest pain, reduced the crisis frequency and the ischemic time an 24 hours electrocardial test. It did not change blood formula, liver and kidney function and glucose metabolism. The tablet, were well tolerable with few side effects, could be use for prophylactic therapy or in combining with other medications against myocardial ischemia
Assuntos
Isquemia Miocárdica , Medicina Tradicional , Doença , Preparações Farmacêuticas , Comprimidos , TerapêuticaRESUMO
The study carries on 156 primary hypertensive patients at 108 hospital. Some characterisictic of these patients were: men with age > 55, women with age > 65, obese 53.1%, function disordered of left ventricle, chest intense attack, injury of cerebral vessel, hypadrenia, eye injury, disorder lipidemia. Complication has association proportional to developpement time of disease. The more treating much complication led to the result of treatment less effect. Patient group treated usualy has less complication than patient group that no intereser to their disease
Assuntos
Hipertensão , DoençaRESUMO
Research on 61 patients with type 2 diabetics found that 45,9% of them at 51 to 60 years old, 62,3% with big abdomen. Non-symbolic subjective symptoms were: 42,6% over eating, 44,2% over drinking and urinate, 49,1% tiring, 34,4% weight reducing, 31,1% cardiovascular wound in which 22,9% pressure increase, 62,3% blood-lipid disorder, were combine lipid disorder and purely triglicerit increase mainly