Nanoscaled surface patterns influence adhesion and growth of human dermal fibroblasts.

In general, there is a need for passivation of nanopatterned biomaterial surfaces if cells are intended to interact only with a feature of interest. For this reason self-assembled monolayers (SAM), varying in chain length, are used; they are highly effective in preventing protein adsorption or cell adhesion. In addition, a simple and cost-effective technique to design nanopatterns of various sizes and distances, the so-called nanosphere lithography (NSL), is discussed, which allows the control of cell adhesion and growth depending on the feature dimensions. Combining both techniques results in highly selective nanostructured surfaces, showing that single proteins selectively adsorb on activated nanopatterns. Additionally, adhesion and growth of normal human dermal fibroblasts (NHDF) is strongly affected by the nanostructure dimensions, and it is proven that fibronectin (FN) matrix formation of these cells is influenced, too. Moreover, the FN fibrils are linked to the hexagonally close-packed nanopatterns. As a result, the system presented here can be applied in tissue engineering and implant design due to the fact that the nanopattern dimensions give rise to further modifications and allow the introduction of chemical heterogeneity to guide stem cell differentiation in the future.

Polyelectrolyte multilayers of poly (l-lysine) and hyaluronic acid on nanostructured surfaces affect stem cell response.

Laser interference lithography (LIL) and the layer-by-layer (LbL) technique are combined here for the first time to design a system with variable nanotopographies and surface viscoelasticity to regulate cell behavior. LIL is used to generate hexagonally arranged nanostructures of gold with different periodicity. In contrast, LBL is used to assemble a multilayer system of poly-l-lysine and hyaluronic acid on top of the nanostructures. Moreover, the viscoelastic properties of that system are controlled by chemical cross-linking. We show that the topography designed with LIL is still present after multilayer deposition and that the formation of the multilayer system renders the surfaces hydrophilic, which is opposite to the hydrophobic nature of pristine nanostructures. The heterogenic system is applied to study the effect on adhesion and differentiation of human adipose-derived stem cells (hADSC). We show that hADSC spreading is increasing with cross-linking degree on flat multilayers, while it is decreasing on nanostructures modified with multilayers. In addition, early effects on signal transduction processes are seen. Finally, hADSC differentiation into chondrogenic and osteogenic lineages is superior to adipogenic lineages on nanostructures modified with multilayers. Hence, the presented system offers great potential to guide stem cell differentiation on surfaces of implants and tissue engineering scaffolds.

Introduction of Laser Interference Lithography to Make Nanopatterned Surfaces for Fundamental Studies on Stem Cell Response.

The extracellular matrix (ECM) is a nanostructured environment that provides chemical, mechanical, and topographical stimuli for various cellular functions. Here, we introduce the application of laser interference lithography (LIL) to generate hexagonally arranged gold nanostructures of three different dimensions on silicon to study the effect of feature dimensions on human adipose-derived stem cells (hADSC) in terms of adhesion, growth, and differentiation. Self-assembled monolayers (SAM) were used to passivate the background silicon surface with a long-chain polyethylene glycol (PEG), whereas the gold nanostructures were activated with mercaptoundecanoic acid (MUDA) to direct protein adsorption and cell adhesive structures to them, only. It was possible to show that the size and distance of the nanostructures affected the spreading of hADSC with a decrease of cell size with the increase of feature dimensions, which corresponded also to the expression of focal adhesions and presence of the small GTPase RhoA. Effects of these early events, related to outside-in signal transduction, were visible by an enhanced cell growth on smaller feature dimensions and distinct effects on cell differentiation. Because of the precise control of chemical and topographical cues, the presented system offers great potential to study effects of material topography on stem cell behavior, which may pave the way for applications in tailoring surfaces of implants and tissue engineering scaffolds.

Cross-linking multilayers of poly-l-lysine and hyaluronic acid: Effect on mesenchymal stem cell behavior.

BACKGROUND: Cells possess a specialized machinery through which they can sense physical as well as chemical alterations in their surrounding microenvironment that affect their cellular behavior. AIM: In this study, we aim to establish a polyelectrolyte multilayer system of 24 layers of poly-l-lysine and hyaluronic acid to control stem cell response after chemical cross-linking. METHODS AND RESULTS: The multilayer build-up process is monitored using different methods, which show that the studied polyelectrolyte multilayer system grows exponentially following the islands and islets theory. Successful chemical cross-linking is monitored by an increased zeta potential toward negative magnitude and an extraordinary growth in thickness. Human adipose-derived stem cells are used here and a relationship between cross-linking degree and cell spreading is shown as cells seeded on higher cross-linked polyelectrolyte multilayer show enhanced spreading. Furthermore, cells that fail to establish focal adhesions on native and low cross-linked polyelectrolyte multilayer films do not proliferate to a high extent in comparison to cells seeded on highly cross-linked polyelectrolyte multilayer, which also show an increased metabolic activity. Moreover, this study shows the relation between cross-linking degree and human adipose-derived stem cell lineage commitment. Histological staining reveals that highly cross-linked polyelectrolyte multilayers support osteogenic differentiation, whereas less cross-linked and native polyelectrolyte multilayers support adipogenic differentiation in the absence of any specific inducers. CONCLUSION: Owing to the precise control of polyelectrolyte multilayer properties such as potential, wettability, and viscoelasticity, the system presented here offers great potential for guided stem cell differentiation in regenerative medicine, especially in combination with materials exhibiting a defined surface topography.

Comparative Study of Osteogenic Activity of Multilayers Made of Synthetic and Biogenic Polyelectrolytes.

Polyelectrolyte multilayer (PEM) coatings on biomaterials are applied to tailor adhesion, growth, and function of cells on biomedical implants. Here, biogenic and synthetic polyelectrolytes (PEL) are used for layer-by-layer assembly to study the osteogenic activity of PEM with human osteosarcoma MG-63 cells in a comparative manner. Formation of PEM is achieved with biogenic PEL fibrinogen (FBG) and poly-l-lysine (PLL) as well as biotinylated chondroitin sulfate (BCS) and avidin (AVI), while poly(allylamine hydrochloride) (PAH) and polystyrene sulfonate (PSS) represent a fully synthetic PEM used as a reference system here. Surface plasmon resonance measurements show highest layer mass for FBG/PLL and similar for PSS/PAH and BCS/AVI systems, while water contact angle and zeta potential measurements indicate larger differences for PSS/PAH and FBG/PLL but not for BCS/AVI multilayers. All PEM systems support cell adhesion and growth and promote osteogenic differentiation as well. However, FBG/PLL layers are superior regarding MG-63 cell adhesion during short-term culture, while the BCS/AVI system increases alkaline phosphatase activity in long-term culture. Particularly, a multilayer system based on affinity interaction like BCS/AVI may be useful for controlled presentation of biotinylated growth factors to promote growth and differentiation of cells for biomedical applications.

Reducing the inflammatory responses of biomaterials by surface modification with glycosaminoglycan multilayers.

Chronic inflammatory responses after implantation of biomaterials can lead to fibrotic encapsulation and failure of implants. The present study was designed to reduce the inflammatory responses to biomaterials by assembling polyelectrolyte multilayers (PEMs) composed of glycosaminoglycans (GAGs) and chitosan (Chi) on glass as model surfaces through layer-by-layer (LBL) technique. Surface plasmon resonance (SPR) and water contact angle (WCA) investigations confirmed the multilayer build-up with alternating deposition of GAGs and Chi layers, while zeta potential measurements showed significant negative charges after multilayer deposition, which further proved the PEM formation. Macrophage adhesion, macrophage spreading morphology, foreign body giant cell (FBGC) formation, as well as ß1 integrin expression and interleukin-1ß (IL-1ß) production were all significantly decreased by GAG-Chi multilayer deposition in comparison to the primary poly (ethylene imine) (PEI) layer. Thereby, the type of GAGs played a pivotal role in inhibiting the inflammatory responses to various extents. Especially heparin (Hep)-Chi multilayers hindered all inflammatory responses to a significantly higher extent in comparison to hyaluronic acid (HA)-Chi and chondroitin sulfate (CS)-Chi multilayer systems. Overall, the present study suggests a great potential of GAG-Chi multilayer coating on implants, particularly the Hep-Chi based systems, to reduce the inflammatory responses.

Effect of Polyelectrolyte Multilayers Assembled on Ordered Nanostructures on Adhesion of Human Fibroblasts.

Nanosphere lithography (NSL) and the layer-by-layer (LbL) technique are combined here for the first time to design a flexible system to achieve nanotopographical control of cell adhesion. NSL is used to generate regular patterns of tetrahedral gold nanodots of different size and distance. Besides the change in topography, LbL is used to generate a polyelectrolyte multilayer (PEM) system consisting of heparin (HEP) and poly(ethylene imine) (PEI) on top of the gold dots. The localized formation of PEM on gold dots is achieved by prior passivation of the surrounding silicon or glass surface. Properties of PEM are changed by adjusting the pH value of HEP solution to either acidic or alkaline values. Studies with human dermal fibroblasts (HDF) reveal that cells spread to a higher extent on PEM formed at pH 5.0 in dependence on the structure dimension. Further, filopodia formation is highly increased in cells on nanostructures exhibiting HEP as a terminal layer. The new system offers a great potential to guide stem cell differentiation in the future owing to its high degree of chemical and topographical heterogeneity.

Effect of Immobilized Thiolated Glycosaminoglycans on Fibronectin Adsorption and Behavior of Fibroblasts.

Glycosaminoglycans (GAGs) chondroitin sulfate, heparin, hyaluronan, and sulfated hyaluronan are lower and higher thiolated to enable a one-step covalent modification of gold or vinyl-terminated surfaces. Measurements of water contact angle and zeta potentials reveal that sulfated GAG-modified surfaces are more wettable and possess a negative surface potential. Additionally, higher thiolated GAGs (tGAGs) exhibit increased wettability and higher surface roughness. Fibronectin (FN) adsorption increases with sulfation degree of tGAGs. The tGAG-functionalized surfaces with higher degree of sulfation promote fibroblast adhesion most under serum-free conditions. The preadsorption of FN allows for more cell adhesion on tGAG surfaces. Metabolic activity measurements show that cell growth is enhanced for tGAGs up to a certain thiolation degree. Overall, thiolation of GAGs does not hamper their bioactivity toward proteins and cells, which make them highly interesting for biomimetic surface modification of implants and tissue engineering scaffolds.

Enantiopure chiral poly(glycerol methacrylate) self-assembled monolayers knock down protein adsorption and cell adhesion.

Chirality plays a fundamental role not only in biological systems, but also in synthetic materials intended for bio-applications. Self-assembled monolayers (SAMs) are prepared on gold surfaces through a "grafting to" method from racemic or enantiopure chiral poly(glycerol methacrylate)s (PGMA(rac), PGMA(R), and PGMA(S)), having a thiol endgroup. Such SAMs constitute a chemically and structurally well-defined model substrate for studying protein adsorption and cell adhesion as a function of the polymer chirality. Surface plasmon resonance measurements reveal that PGMA SAMs greatly reduce the adsorption of bovine serum albumin (BSA) compared to bare gold surfaces. Interestingly, enantiopure SAMs based on PGMA(R) or PGMA(S) show a significantly larger reduction in BSA adsorption than PGMA(rac)-covered surfaces. Studies with the monocytic cell line THP-1 show a similar relationship between enantiopurity of PGMA SAMs and the extent of cell adhesion. Ellipsometry and Raman spectroscopy measurements indicate that SAMs formed by PGMA(rac) have a higher grafting density compared to SAMs of PGMA(R) and PGMA(S). This seems to be due to the ability of PGMA(rac) to form more intermolecular hydrogen bonds among polymer chains compared to the enantiopure PGMAs. Circular dichroism spectroscopy provide evidence that enantiopure polymers adopt a chiral ordered conformation, most likely helical, in aqueous solutions. It is concluded that a higher water content of SAMs formed by enantiopure PGMA(S) and PGMA(R) SAMs arises from the macromolecular chiral conformation adopted by their enantiopure PGMA chains, and it is the decisive reason for the reduced BSA adsorption and cell adhesion as compared to PGMA(rac) SAMs.

Controlling fibroblast adhesion with pH modified polyelectrolyte multilayers.

Tissue cells need to adhere to a biomaterial surface to promote their growth and differentiation and, thus, foster the integration of implants. As a result, surface features and their modification play an important role in biomedical applications. In this study, the layer-by-layer (LbL) technique was used to design self-assembled polyelectrolyte multilayer (PEM) coatings of polyethyleneimine (PEI) and heparin (HEP) on glass, which will control the adhesion of primary human dermal fibroblasts in a model system. The study showed that, among other surface features, the wettability of surfaces can be controlled by changing the conditions during multilayer self-assembly. Here, the pH value of the HEP solution was adjusted to acidic or alkaline values for terminal layers, which also led to a change in multilayer growth. Further, the study revealed that plain terminal layers were rather cytophobic. Upon pre-adsorption of fibronectin (FN), a clear effect on cell adhesion and morphology in dependence on the pH setup was evident. Proliferation studies clearly showed that terminal layers, which impaired cell adhesion, also inhibited growth of human fibroblasts under serum-conditions. On the other hand, on layers with pronounced cell adhesion an elevated cell growth was also observed. As a result, HEP terminated multilayers are interesting for applications requiring cell repellent properties, whereas PEI terminated multilayers could be used to promote cell adhesion and growth on implant surfaces.

Nanostructured material surfaces--preparation, effect on cellular behavior, and potential biomedical applications: a review.

Nanostructures play important roles in vivo, where nanoscaled features of extracellular matrix (ECM) components influence cell behavior and resultant tissue formation. This review summarizes some of the recent developments in fostering new concepts and approaches to nanofabrication, such as top-down and bottom-up and combinations of the two. As in vitro investigations demonstrate that man-made nanotopography can be used to control cell reactions to a material surface, its potential application in implant design and tissue engineering becomes increasingly evident. Therefore, we present recent progress in directing cell fate in the field of cell mechanics, which has grown rapidly over the last few years, and in various tissue-engineering applications. The main focus is on the initial responses of cells to nanostructured surfaces and subsequent influences on cellular functions. Specific examples are also given to illustrate the potential nanostructures may have for biomedical applications and regenerative medicine.

pH-dependent modulation of fibroblast adhesion on multilayers composed of poly(ethylene imine) and heparin.

Adhesion of tissue cells is a prerequisite for their growth and differentiation but prevents also apoptosis. Here the layer-by-layer technique (LbL) was used to design multilayer structures of poly(ethylene imine) (PEI) and heparin (HEP) on glass as model biomaterial to control the adhesion of primary human dermal fibroblasts. Distinct surface features like wettability, charge and lateral structures were controlled by changing the pH value of the HEP solution during multilayer assembly to acidic, neutral or alkaline values. While plain terminal layers were rather cytophobic, the pre-adsorption of serum or fibronectin (FN) caused a distinct change in cell morphology in dependence on the pH setup. The effect of serum was more prominent on PEI layers probably due to their positive surface charge, whereas the effect of FN was more pronounced on HEP terminated multilayers possibly due to its ability to bind FN specifically. Those layers which hampered cell adhesion also inhibited growth of human fibroblasts under serum conditions. Conversely, on layers where cell adhesion was increased also an elevated growth and, thus, metabolic activity was observed.