Approaching the quantum limit in two-dimensional semiconductor contacts.

The development of next-generation electronics requires scaling of channel material thickness down to the two-dimensional limit while maintaining ultralow contact resistance1,2. Transition-metal dichalcogenides can sustain transistor scaling to the end of roadmap, but despite a myriad of efforts, the device performance remains contact-limited3-12. In particular, the contact resistance has not surpassed that of covalently bonded metal-semiconductor junctions owing to the intrinsic van der Waals gap, and the best contact technologies are facing stability issues3,7. Here we push the electrical contact of monolayer molybdenum disulfide close to the quantum limit by hybridization of energy bands with semi-metallic antimony ([Formula: see text]) through strong van der Waals interactions. The contacts exhibit a low contact resistance of 42 ohm micrometres and excellent stability at 125 degrees Celsius. Owing to improved contacts, short-channel molybdenum disulfide transistors show current saturation under one-volt drain bias with an on-state current of 1.23 milliamperes per micrometre, an on/off ratio over 108 and an intrinsic delay of 74 femtoseconds. These performances outperformed equivalent silicon complementary metal-oxide-semiconductor technologies and satisfied the 2028 roadmap target. We further fabricate large-area device arrays and demonstrate low variability in contact resistance, threshold voltage, subthreshold swing, on/off ratio, on-state current and transconductance13. The excellent electrical performance, stability and variability make antimony ([Formula: see text]) a promising contact technology for transition-metal-dichalcogenide-based electronics beyond silicon.

Ultralow-pressure-driven polarization switching in ferroelectric membranes.

Van der Waals integration of freestanding perovskite-oxide membranes with two-dimensional semiconductors has emerged as a promising strategy for developing high-performance electronics, such as field-effect transistors. In these innovative field-effect transistors, the oxide membranes have primarily functioned as dielectric layers, yet their great potential for structural tunability remains largely untapped. Free of epitaxial constraints by the substrate, these freestanding membranes exhibit remarkable structural tunability, providing a unique material system to achieve huge strain gradients and pronounced flexoelectric effects. Here, by harnessing the excellent structural tunability of PbTiO3 membranes and modulating the underlying substrate's elasticity, we demonstrate the tip-pressure-induced polarization switching with an ultralow pressure (down to 0.06 GPa). Moreover, as an application demonstration, we develop a prototype non-volatile ferroelectric field-effect transistor integrated on silicon that can be operated mechanically and electrically. Our findings underscore the great potential of oxide membranes for utilization in advanced non-volatile electronics and highly sensitive pressure sensors.

An in-memory computing architecture based on a duplex two-dimensional material structure for in situ machine learning.

The growing computational demand in artificial intelligence calls for hardware solutions that are capable of in situ machine learning, where both training and inference are performed by edge computation. This not only requires extremely energy-efficient architecture (such as in-memory computing) but also memory hardware with tunable properties to simultaneously meet the demand for training and inference. Here we report a duplex device structure based on a ferroelectric field-effect transistor and an atomically thin MoS2 channel, and realize a universal in-memory computing architecture for in situ learning. By exploiting the tunability of the ferroelectric energy landscape, the duplex building block demonstrates an overall excellent performance in endurance (>1013), retention (>10 years), speed (4.8 ns) and energy consumption (22.7 fJ bit-1 µm-2). We implemented a hardware neural network using arrays of two-transistors-one-duplex ferroelectric field-effect transistor cells and achieved 99.86% accuracy in a nonlinear localization task with in situ trained weights. Simulations show that the proposed device architecture could achieve the same level of performance as a graphics processing unit under notably improved energy efficiency. Our device core can be combined with silicon circuitry through three-dimensional heterogeneous integration to give a hardware solution towards general edge intelligence.

Sub-thermionic, ultra-high-gain organic transistors and circuits.

The development of organic thin-film transistors (OTFTs) with low power consumption and high gain will advance many flexible electronics. Here, by combining solution-processed monolayer organic crystal, ferroelectric HfZrOx gating and van der Waals fabrication, we realize flexible OTFTs that simultaneously deliver high transconductance and sub-60 mV/dec switching, under one-volt operating voltage. The overall optimization of transconductance, subthreshold swing and output resistance leads to transistor intrinsic gain and amplifier voltage gain over 5.3 × 104 and 1.1 × 104, respectively, which outperform existing technologies using organics, oxides and low-dimensional nanomaterials. We further demonstrate battery-powered, integrated wearable electrocardiogram (ECG) and pulse sensors that can amplify human physiological signal by 900 times with high fidelity. The sensors are capable of detecting weak ECG waves (undetectable even by clinical equipment) and diagnosing arrhythmia and atrial fibrillation. Our sub-thermionic OTFT is promising for battery/wireless powered yet performance demanding applications such as electronic skins and radio-frequency identification tags, among many others.

Three-dimensional monolithic micro-LED display driven by atomically thin transistor matrix.

Two-dimensional materials are promising candidates for future electronics due to unmatched device performance at atomic limit and low-temperature heterogeneous integration. To adopt these emerging materials in computing and optoelectronic systems, back end of line (BEOL) integration with mainstream technologies is needed. Here, we show the integration of large-area MoS2 thin-film transistors (TFTs) with nitride micro light-emitting diodes (LEDs) through a BEOL process and demonstrate high-resolution displays. The MoS2 transistors exhibit median mobility of 54 cm2 V-1s -1, 210 µA µm-1 drive current and excellent uniformity. The TFTs can drive micrometre-sized LEDs to 7.1 × 107 cd m-2 luminance under low voltage. Comprehensive analysis on driving capability, response time, power consumption and modulation scheme indicates that MoS2 TFTs are suitable for a range of display applications up to the high resolution and brightness limit. We further demonstrate prototypical 32 × 32 active-matrix displays at 1,270 pixels-per-inch resolution. Moreover, our process is fully monolithic, low-temperature, scalable and compatible with microelectronic processing.