Precise Design of a 0.8 nm Pore Size in a Separator Interfacial Layer Inspired by a Sieving Effect toward Inhibiting Polysulfide Shuttling and Promoting Li+ Diffusion.

The incomplete blocking of small-sized polysulfides by pore size and the effect on Li+ transport are generally neglected when the size-sieving effect is employed to suppress the shuttling of polysulfides. Herein, ion-selective modified layers with pore sizes equal to, greater than, and less than 0.8 nm, respectively, on the polypropylene separator are fabricated to obtain the preferable pore size for separation of polysulfides and Li+. As a result, the modified layer with a pore size of 0.8 nm can efficiently inhibit the shuttling of polysulfides and simultaneously boost the diffusion of Li+ under the double effect of the size advantage and electrostatic shielding. Consequently, the battery using a separator with a modified layer having a pore size of 0.8 nm possesses a lower capacity attenuation of 0.047% after 1000 cycles at 2.0 C. This work serves as a vital guide for suppressing polysulfide shuttle using ion-selective sieving effects for lithium-sulfur batteries.

Size Effect for Inhibiting Polysulfides Shuttle in Lithium-Sulfur Batteries.

It is undeniable that the dissolution of polysulfides is beneficial in speeding up the conversion rate of sulfur in electrochemical reactions. But it also brings the bothersome "shuttle effect". Therefore, if polysulfides can be retained on the cathode side, the efficient utilization of the polysulfides can be guaranteed to achieve the excellent performance of lithium-sulfur batteries. Based on this idea, considerable methods have been developed to inhibit the shuttling of polysulfides. It is necessary to emphasize that no matter which method is used, the solvation mechanism, and existence forms of polysulfides are essential to analyze. Especially, it is important to clarify the sizes of different forms of polysulfides when using the size effect to inhibit the shuttling of polysulfides. In this review, a comprehensive summary and in-depth discussion of the solvation mechanism, the existing forms of polysulfides, and the influencing factors affecting polysulfides species are presented. Meanwhile, the size of diverse polysulfide species is sorted out for the first time. Depending on the size of polysulfides, tactics of using size effect in cathode, separator, and interlayer parts are elaborated. Finally, a design idea of materials pore size is proposed to satisfy the use of size effect to inhibit polysulfides shuttle.

Improved Adaptive Multi-Objective Particle Swarm Optimization of Sensor Layout for Shape Sensing with Inverse Finite Element Method.

The inverse finite element method (iFEM) is one of the most effective deformation reconstruction techniques for shape sensing, which is widely applied in structural health monitoring. The distribution of strain sensors affects the reconstruction accuracy of the structure in iFEM. This paper proposes a method to optimize the layout of sensors rationally. Firstly, this paper constructs a dual-objective model based on the accuracy and robustness indexes. Then, an improved adaptive multi-objective particle swarm optimization (IAMOPSO) algorithm is developed for this model, which introduces initialization strategy, the adaptive inertia weight strategy, the guided particle selection strategy and the external candidate solution (ECS) set maintenance strategy to multi-objective particle swarm optimization (MOPSO). Afterwards, the performance of IAMOPSO is verified by comparing with MOPSO applied on the existing inverse beam model. Finally, the IAMOPSO is employed to the deformation reconstruction of complex plate-beam model. The numerical and experimental results demonstrate that the IAMOPSO is an excellent tool for sensor layout in iFEM.

Rational Design on Chemical Regulation of Interfacial Microstress Engineering by Matching Young's Modulus in a CsPbBr3 Perovskite Film with Mechanical Compatibility toward Enhanced Photoelectric Conversion Efficiency.

Thermodynamically induced tensile stress in the perovskite film will lead to the formation of atomic vacancies, seriously destroying the photovoltaic efficiency stability of the perovskite solar cells (PSCs). Among them, cations and halide anions vacancies are unavoidable; these point vacancies are considered to be a major source of the ionic migration and perovskite degradation at the crystal boundary and surface of the perovskite films. Here, we use choline bromide to modify the perovskite film by occupying the atomic defects in the CsPbBr3 perovskite film. The results show that the zwitterion quaternary ammonium ions and bromide ions in choline bromide can simultaneously occupy the Cs+ cation and Br- anions vacancies in the perovskite film by the ionic bonding effect, for which the defect-state density on the surface of the perovskite film can be significantly reduced, leading to the effective enhancement of carrier lifetime. In addition, the residual stress at the crystal boundary can be effectively reduced by lowering the Young's modulus in the CsPbBr3 perovskite film. As a result, the optimized device achieves a photoelectric conversion efficiency (PCE) of 9.06% with an increase of 41.1% compared to the control device with a PCE of 6.42%. Most importantly, the newborn thermal stress due to thermal expansion during heat working conditions can be transferred from the polycrystalline perovskite to the carbon layer by the matched Young's modulus, thus resulting in improved stability perovskite film under environmental conditions. The work provides new insights for preparing high-quality perovskite films with low defect-state density and residual stress.