Preparation of Nano/Microcapsules of Ozonated Olive Oil in Hyaluronan Matrix and Analysis of Physicochemical and Microbiological (Biological) Properties of the Obtained Biocomposite.

Hydrogels, based on natural polymers, such as hyaluronic acid, are gaining an increasing popularity because of their biological activity. The antibacterial effect of ozone is widely known and used, but the instability the gas causes, severely limits its application. Ozone entrapment in olive oil by its reaction with an unsaturated bond, allows for the formation of stable, therapeutically active ozone derivatives. In this study, we obtained an innovative hydrogel, based on hyaluronic acid containing micro/nanocapsules of ozonated olive oil. By combination of the biocompatible polymer with a high regenerative capacity and biologically active ingredients, we obtained a hydrogel with regenerative properties and a very weak inhibitory effect against both bacterial commensal skin microbiota and pathogenic Candida-like yeasts. We assessed the stability and rheological properties of the gel, determined the morphology of the composite, using scanning electron microscopy (SEM) and particle size by the dynamic light scattering (DLS) method. We also performed Attenuated total reflectance Fourier transform infrared (FTIR-ATR) spectroscopy. The functional properties, including the antimicrobial potential were assessed by the microbiological analysis and in vitro testing on the HaCat human keratinocyte cell line. The studies proved that the obtained emulsions were rheologically stable, exhibited an antimicrobial effect and did not show cytotoxicity in the HaCat keratinocyte model.

The Functional and Application Possibilities of Starch/Chitosan Polymer Composites Modified by Graphene Oxide.

This study describes functional properties of bionanocomposites consisting of starch/chitosan/graphene oxide (GO) obtained using the green synthesis method, such as water-barrier and optical properties, as well as the rate of degradation by enzymatic and acid hydrolysis. The toxicity of the composites and their effects on the development of pathogenic microflora during storage of meat food products was also investigated. Although the results showed that the barrier properties of the composites were weak, they were similar to those of biological systems. The studies carried out confirmed the good optical properties of the composites containing chitosan, which makes it possible to use them as active elements of packaging. The susceptibility of starch and chitosan films to enzymatic and acid hydrolyses indicates their relatively high biodegradability. The lack of toxicity and the high barrier against many microorganisms offer great potential for applications in the food industry.

The use of active compounds to shape the quality of active double-layer films based on furcellaran intended for packaging salad-dressing - Assessment of utilitarian and storage properties.

In order to obtain innovative, high-quality biodegradable packaging, double-layer films based on furcellaran and gelatin, enriched with plant extracts were created. The films were assessed considering their potential utility, applications and environmental impact. The mechanical properties over a period of nine months were studied and it was noted that the passing of time had a beneficial effect on these parameters. The antioxidant properties was also examined, with the highest results obtained using the DPPH and metal chelating activity methods for GE (76.64 % and 9.85 % respectively), while this film showed the lowest FRAP value (5.99 %) compared to the highest obtained for DTE (52.62 %). For the first time, the possibility of using the double-layer active FUR/GEL film as packaging for salad-dressing was evaluated, but no improvement in parameters was observed regardless of the extract used. The environmental impact analysis showed the ability to completely decomposed in vermicompost within several days.

Influence of Curcuma Longa extract in citral addition on functional properties of thin films with triple-layer structure based on furcellaran and gelatin.

In this study, we obtained triple-layer films based on furcellaran and gelatin, in which the middle layer was enriched with extract of Curcuma longa in citral. This newly developed material underwent a comprehensive characterisation process to identify significant improvements in its functional properties. Both SEM, XRD and FTIR analyzes indicated the formation of interactions not only between the components but also between the film layers. Notably, the incorporation of the natural extract led to a significant reduction in solubility, decreasing it from 74.79 % to 57.25 %, while enhancing thermal stability expressed as a melting point elevating it from 147.10 °C in the control film to 158.80 °C in the film with the highest concentration of the active ingredient. Simultaneously, the addition of this active ingredient resulted in decreased water contact angle (WCA) values, rendering the film more hydrophilic. The produced films exhibit great promise as packaging materials, particularly within the food industry, and the conducted research is marked by its forward-looking and developmental approach.

Phytolacca americana extract as a quality-enhancing factor for biodegradable double-layered films based on furcellaran and gelatin - Property assessment.

For the first time, novel active double-layered films based on furcellaran (FUR) and gelatin (GEL) with the addition of Phytolacca americana (PA) extract were obtained. The 1st layer consisted of FUR and GEL, while the aqueous extract of P. americana berries was added in three different concentrations to the 2nd FUR-based layer. The films were characterised by good mechanical (TS range of 0.0011-0.0013 MPa, EAB range between 30.38 %-33.51 %) and water properties (WVTR range of 574.74-588.49 g/m2xd). Structural analysis (SEM and AFM) confirmed good film structure: regular, without cracks or air bubbles. The films showed antioxidant activity tested via the Folin-Ciocâlteu method (4.77-20.70 mg GAExg-1), FRAP assay (0.18-3.40 mM TExg-1) and CUPRAC assay (48.63-53.99 mM TExg-1). The film with the highest PA concentration (6 %) demonstrated the ability to neutralise free radicals, DPPH• and ABTS2+•, at the levels of 1.97 % and 17.34 %, respectively. The ecotoxicity test performed on Lepidium sativum seeds confirmed the lack of ecotoxic film aspects. The biodegradation test indicated that the films are biodegradable. The obtained films can be a good alternative to plastic packaging films (used in the food packaging industry), which are currently a global problem related to the development of post-consumer plastics.

Sugar-Free, Vegan, Furcellaran Gummy Jellies with Plant-Based Triple-Layer Films.

Increasing consumer awareness of the impact of nutrition on health and the growing popularity of vegan diets are causing a need to look for new plant-based formulations of standard confectionery products with high energy density and low nutritional value, containing gelatin. Therefore, the aim of this study was to develop vegan and sugar-free gummy jellies based on an algae-derived polysaccharide-furcellaran (FUR). Until now, FUR has not been used as a gel-forming agent despite the fact that its structure-forming properties show high potential in the production of vegan confectionery. The basic formulation of gummy jellies included the addition of soy protein isolate and/or inulin. The final product was characterized regarding its rheological, antioxidant, mechanical and physicochemical properties. Eco-friendly packaging for the jellies composed of a three-layer polymer film has also been developed. It was observed that the highest values of textural parameters were obtained in jellies containing the addition of soy protein isolate, whose positive effect was also found on antioxidant activity. Before drying, all furcellaran-based gel systems showed G' and G" values characteristic of strong elastic hydrogels. Storing jellies for a week under refrigeration resulted in an increase in hardness, a decrease in moisture content and reduced water activity values. Overall, our study indicates the high potential of furcellaran both as a gelling agent in confectionery products and as a base polymer for their packaging.

Improving the quality of multi-layer films based on furcellaran by immobilising active ingredients and impact assessment of the use of a new packaging material.

To improve the quality of multi-layer film, four-layer films based on furcellaran and active ingredients: gelatin hydrolysate, curcumin, capsaicin, montmorillonite and AgNPs, were produced in an innovative manner. The films were characterised by SEM and AFM analysis. Along with an increase in the concentration of active ingredients, the structure of the film becomes less homogeneous, which may affect the functional properties. The objective of the study was to analyse changes in the functional properties of the newly-obtained films and to verify their potential as packaging materials for fish products. With the increase in active ingredient concentration, water properties also improved, but there were no noticeable significant effects on mechanical properties. For antioxidant properties, the obtained values were within 1.04-2.74 mM Trolox/mg (FRAP) and 7.67-40.49% (DPPH). The obtained multi-layer films were examined with regard to the shelf-life of salmon. For this purpose, salmon fillets were packed in films having good antioxidant and functional properties. The films were effective in microorganism growth inhibition responsible for fillet spoilage during storage. The microorganism number in the active film-stored samples was lower by 0.13 log CFU/g on day 12 versus the control. However, film application did not retard lipid oxidation in the salmon fillets. Nonetheless, the films show great potential as active packaging materials, extending the shelf-life of the packed foods.

The influence of aqueous butterfly pea (Clitoria ternatea) flower extract on active and intelligent properties of furcellaran Double-Layered films - in vitro and in vivo research.

Innovative, intelligent and active double-layer films, based on furcellaran and with the addition of gelatin hydrolysates, have been obtained for the first time. An aqueous extract of clitoria flower in 3 concentrations was included in the 1st FUR layer. The films demonstrated strong antimicrobial effects, but did not exhibit fungicidal properties. The antioxidant properties of the films were within the range of 2.27-3.92 mM Trolox/mg (FRAP method) and 36.67-61.24 % (DPPH method). The films were used as active packaging materials in salmon fillets, which were stored for a period of 12 days in 4 °C. Analysis concerning microbiological properties of the stored fillets showed the possibility of extending their shelf-life by 6 days. Lipid oxidation, determined by TBARS has delayed. The obtained films are a promising material for the packaging industry. This is an important aspect within the context of global food waste and also the need to reduce synthetic materials.

Developing Technology for the Production of Innovative Coatings with Antioxidant Properties for Packaging Fish Products.

In this study, we investigated the effects of furcellaran−gelatine (FUR/GEL) coatings incorporated with herb extracts on the quality retention of carp fish during refrigeration. Nutmeg, rosemary, thyme, milfoil, marjoram, parsley, turmeric, basil and ginger were subjected to water and ethanol extraction methods (10% concentration of herbs). The water extractions of the rosemary and thyme (5%) were used for the further development of coatings due to their high 2,2-Diphenyl-1-picrylhydrazyl (DPPH: 85.49 and 83.28%) and Ferric Reducing Antioxidant Power Assay values (FRAP: 0.46 and 0.56 mM/L) (p < 0.05), respectively. A new, ready-to-cook product with the coatings (carp fillets) was evaluated regarding quality in terms of colour parameters, texture profile, water activity, Thiobarbituric Acid Reactive Substances (TBARSs) and sensory analyses during 12 days of storage at 4 °C. The results show that the colour of the carp fillets treated with the rosemary and thyme extracts became slightly darker and had a propensity towards redness and yellowness. In contrast to the control group, the carp fillets stored in the coatings with the rosemary extract effectively slowed the lipid oxidation processes. Therefore, the innovative coatings produced from carp processing waste may have high potential as components in convenience food products and could extend the shelf-life of carp fillets during refrigerated storage. However, further research is needed to assess the microbiological stability of the obtained food products.

The Preparation and Characterization of Quantum Dots in Polysaccharide Carriers (Starch/Chitosan) as Elements of Smart Packaging and Their Impact on the Growth of Microorganisms in Food.

Nanocomposite materials are increasingly commonly used to ensure food safety and quality. Thanks to their unique properties, stemming from the presence of nanoparticles, they are used to develop advanced sensors and biosensors, e.g., for various harmful substances, heavy metals, microorganism growth, and environmental changes in food products. The aim of this study is to produce novel films based on natural resources-potato starch and chitosan-incorporating generated quantum dots of zinc sulfide and cadmium sulfide. The biocomposites were subjected to the following assays: FTIR spectroscopy, UV-VIS spectroscopy, photoluminescence spectroscopy, and SEM/TEM spectroscopy. Their mechanical properties were also analyzed, a colorimetric analysis was performed, and the water content, solubility, and water absorption capacity were determined. A storage test was also performed, using poultry meat covered with the produced films, to assess the microbiological quality. The results confirmed the presence of the quantum dots in the starch-chitosan matrix. The unique optical properties of the films were also demonstrated. It was shown that the composites with nanoparticles limited the growth of selected microorganisms in poultry meat. The food storage time was found to have an impact on the fluorescent properties of the composites. The results point to the possibility of using the produced films as active and smart packaging.