Recovery from parenteral nutrition-associated cholestasis takes approximately two months in very low birth weight infants.

AIM: To investigate the clinical characteristics and course of parenteral nutrition-associated cholestasis (PNAC) in very low birth weight (VLBW) infants. METHODS: The charts of VLBW infants were retrospectively reviewed. The clinical characteristics of infants with and without PNAC were compared, trends in liver enzymes were investigated, and the characteristics of infants with PNAC were analysed based on age of onset. RESULTS: PNAC was observed in 53 (13.2%) of 403 infants who survived and completed follow-up and was associated with significantly lower gestational age, birth weight, and adverse neonatal outcomes. PNAC started at a median 32 (interquartile range 23-47) days, PN was applied for 53 (34.5-64.5) days, the maximum direct bilirubin (DB) was observed at 63 (50-76) postnatal days, and PNAC resolved at 94 (79-122) postnatal days postnatal age. PNAC lasted 61 (38-89.5) days. AST and ALT normalised at 111 (100.3-142.0) and 109.5 (97-161.3) postnatal days. Infants with early-onset PNAC had significantly longer PN duration, higher maximum DB, and higher maximum AST than those with late-onset PNAC. CONCLUSION: Elevated DB, AST, and ALT persist for a long period after discontinuing PN. We suggest a cautious approach that involves waiting and reducing the frequency of additional repetitive examinations.

Porous Polyethylene Supports in Reinforcement of Multiblock Hydrocarbon Ionomers for Proton Exchange Membranes.

Hydrocarbon (HC)-based block copolymers have been recognized as promising candidates for proton exchange membranes (PEMs) due to their distinct hydrophilic-hydrophobic separation, which results in improved proton transport compared to that of random copolymers. However, most PEMs derived from HC-based ionomers, including block copolymers, encounter challenges related to durability in electrochemical cells due to their low mechanical and chemical properties. One method for reinforcing HC-based ionomers involves incorporating the ionomers into commercially available low surface tension PTFE porous substrates. Nevertheless, the high interfacial energy between the hydrocarbon-based ionomer solution and PTFE remains a challenge in this reinforcement process, which necessitates the application of surface energy treatment to PTFE. Here, multiblock sulfonated poly(arylene ether sulfone) (SPAES) ionomers are being reinforced using untreated PE on the surface, and this is compared to reinforcement using surface-treated porous PTFE. The PE support layer exhibits a lower surface energy barrier compared to the surface-treated PTFE layer for the infiltration of the multiblock SPAES solution. This is characterized by the absence of noticeable voids, high translucency, gas impermeability, and a physical and chemical stability. By utilizing a high surface tension PE support with a comparable value to the multiblock SPAES, effective reinforcement of the multiblock SPAES ionomers is achieved for a PEM, which is potentially applicable to various hydrogen energy-based electrochemical cells.

Towards the Improvement of Ornamental Attributes in Chrysanthemum: Recent Progress in Biotechnological Advances.

Incessant development and introduction of novel cultivars with improved floral attributes are vital in the dynamic ornamental industry. Chrysanthemum (Chrysanthemum morifolium) is a highly favored ornamental plant, ranking second globally in the cut flower trade, after rose. Development of new chrysanthemum cultivars with improved and innovative modifications in ornamental attributes, including floral color, shape, plant architecture, flowering time, enhanced shelf life, and biotic and abiotic stress tolerance, is a major goal in chrysanthemum breeding. Despite being an economically important ornamental plant, the application of conventional and molecular breeding approaches to various key traits of chrysanthemum is hindered owing to its genomic complexity, heterozygosity, and limited gene pool availability. Although classical breeding of chrysanthemum has resulted in the development of several hundreds of cultivars with various morphological variations, the genetic and transcriptional control of various important ornamental traits remains unclear. The coveted blue colored flowers of chrysanthemums cannot be achieved through conventional breeding and mutation breeding due to technical limitations. However, blue-hued flower has been developed by genetic engineering, and transgenic molecular breeding has been successfully employed, leading to substantial progress in improving various traits. The recent availability of whole-genome sequences of chrysanthemum offers a platform to extensively employ MAS to identify a large number of markers for QTL mapping, and GWAS to dissect the genetic control of complex traits. The combination of NGS, multi-omic platforms, and genome editing technologies has provided a tremendous scope to decipher the molecular and regulatory mechanisms. However, the application and integration of these technologies remain inadequate for chrysanthemum. This review, therefore, details the significance of floral attributes, describes the efforts of recent advancements, and highlights the possibilities for future application towards the improvement of crucial ornamental traits in the globally popular chrysanthemum plant.

Recent Progress in Enhancing Fungal Disease Resistance in Ornamental Plants.

Fungal diseases pose a major threat to ornamental plants, with an increasing percentage of pathogen-driven host losses. In ornamental plants, management of the majority of fungal diseases primarily depends upon chemical control methods that are often non-specific. Host basal resistance, which is deficient in many ornamental plants, plays a key role in combating diseases. Despite their economic importance, conventional and molecular breeding approaches in ornamental plants to facilitate disease resistance are lagging, and this is predominantly due to their complex genomes, limited availability of gene pools, and degree of heterozygosity. Although genetic engineering in ornamental plants offers feasible methods to overcome the intrinsic barriers of classical breeding, achievements have mainly been reported only in regard to the modification of floral attributes in ornamentals. The unavailability of transformation protocols and candidate gene resources for several ornamental crops presents an obstacle for tackling the functional studies on disease resistance. Recently, multiomics technologies, in combination with genome editing tools, have provided shortcuts to examine the molecular and genetic regulatory mechanisms underlying fungal disease resistance, ultimately leading to the subsequent advances in the development of novel cultivars with desired fungal disease-resistant traits, in ornamental crops. Although fungal diseases constitute the majority of ornamental plant diseases, a comprehensive overview of this highly important fungal disease resistance seems to be insufficient in the field of ornamental horticulture. Hence, in this review, we highlight the representative mechanisms of the fungal infection-related resistance to pathogens in plants, with a focus on ornamental crops. Recent progress in molecular breeding, genetic engineering strategies, and RNAi technologies, such as HIGS and SIGS for the enhancement of fungal disease resistance in various important ornamental crops, is also described.

Anthocyanins in Floral Colors: Biosynthesis and Regulation in Chrysanthemum Flowers.

Chrysanthemum (Chrysanthemum morifolium) is an economically important ornamental crop across the globe. As floral color is the major factor determining customer selection, manipulation of floral color has been a major objective for breeders. Anthocyanins are one of the main pigments contributing to a broad variety of colors in the ray florets of chrysanthemum. Manipulating petal pigments has resulted in the development of a vast range of floral colors. Although the candidate genes involved in anthocyanin biosynthesis have been well studied, the genetic and transcriptional control of floral color remains unclear. Despite advances in multi-omics technology, these methods remain in their infancy in chrysanthemum, owing to its large complex genome and hexaploidy. Hence, there is a need to further elucidate and better understand the genetic and molecular regulatory mechanisms in chrysanthemum, which can provide a basis for future advances in breeding for novel and diverse floral colors in this commercially beneficial crop. Therefore, this review describes the significance of anthocyanins in chrysanthemum flowers, and the mechanism of anthocyanin biosynthesis under genetic and environmental factors, providing insight into the development of novel colored ray florets. Genetic and molecular regulatory mechanisms that control anthocyanin biosynthesis and the various breeding efforts to modify floral color in chrysanthemum are detailed.

RNA sequencing analysis of Cymbidium goeringii identifies floral scent biosynthesis related genes.

BACKGROUND: Cymbidium goeringii belongs to the Orchidaceae, which is one of the most abundant angiosperm families. Cymbidium goeringii consist with high economic value and characteristics include fragrance and multiple flower colors. Floral scent is one of the important strategies for ensuring fertilization. However, limited genetic data is available in this non-model plant, and little known about the molecular mechanism responsible for floral scent in this orchid. Transcriptome and expression profiling data are needed to identify genes and better understand the biological mechanisms of floral scents in this species. Present transcriptomic data provides basic information on the genes and enzymes related to and pathways involved in flower secondary metabolism in this plant. RESULTS: In this study, RNA sequencing analyses were performed to identify changes in gene expression and biological pathways related scent metabolism. Three cDNA libraries were obtained from three developmental floral stages: closed bud, half flowering stage and full flowering stage. Using Illumina technique 159,616,374 clean reads were obtained and were assembled into 85,868 final unigenes (average length 1194 nt), 33.85% of which were annotated in the NCBI non redundant protein database. Among this unigenes 36,082 were assigned to gene ontology and 23,164 were combined with COG groups. Total 33,417 unigenes were assigned in 127 pathways according to the Kyoto Encyclopedia of Genes and Genomes pathway database. According these transcriptomic data we identified number of candidates genes which differentially expressed in different developmental stages of flower related to fragrance biosynthesis. In q-RT-PCR most of the fragrance related genes highly expressed in half flowering stage. CONCLUSIONS: RNA-seq and DEG data provided comprehensive gene expression information at the transcriptional level that could be facilitate the molecular mechanisms of floral biosynthesis pathways in three developmental phase's flowers in Cymbidium goeringii, moreover providing useful information for further analysis on C. goeringii, and other plants of genus Cymbidium.

Flavobacterium panacisoli sp. nov., isolated from soil of a ginseng field.

A novel bacterial strain, designated DCY70(T), was isolated from soil of a ginseng field in Republic of Korea and was characterized in order to determine its taxonomic position. The strain was Gram-reaction negative, yellow-pigmented, rod-shaped and catalase- and oxidase-positive. Based on the 16S rRNA gene sequence similarity, strain DCY70(T) was shown to belong to the genus Flavobacterium, most closely related to Flavobacterium oncorhynchi 631-08(T) (98.4 %), Flavobacterium plurextorum 1126-1H-08(T) (97.9 %), Flavobacterium chilense LM-09-Fp(T) (97.9 %) and Flavobacterium chungangense CJ(T) (97.7 %). The chemotaxonomic characteristics showed only menaquinone-6 (MK-6), iso-C15:0, iso-C15:0 3OH, iso-C17:0 3OH and summed feature 3 as major cellular fatty acids. Polar lipids were phosphatidylethanolamine (PE), two unidentified aminolipids, four unidentified polar lipids and one unidentified phospholipid. The DNA G+C content was 34.9 mol%. Based on the phylogenetic, phenotypic and genotypic data, a novel species, Flavobacterium panacisoli sp. nov., is proposed (=KCTC 32393(T) = JCM 19162(T)).

Effect of Crown Ether Additives on the Enhanced Performance of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells.

One of the key components of the fuel cell stack is a metallic bipolar plate (MBP) that plays multiple roles, such as current collector, fuel and oxidant distributor, and mechanical support. However, corrosion and consequent metal elution are major drawbacks of the MBP because they diminish the efficiency and power performance of membrane-electrode assemblies (MEAs). Herein, we show that the crown ether (CE) additive can simultaneously inhibit surface corrosion of the MBP and act as a scavenger for eluted metal ions to alleviate contamination of other components. From the electrochemical measurement, high-resolution imaging, and elemental analysis, we have found that the CE undergoes electrolytic decomposition and makes an efficient protective layer in an in situ manner. This layer prevents direct contact between the MBP and electrolyte as well as the dissolution of metal ions into the electrolyte. In addition, we demonstrate that the CE can improve the recovery protocol of the MEA owing to the formation of host-guest complexes between the CE and metal cations. These results provide key insights into the design of high-performance MBPs for proton-exchange membrane fuel cells.

Comparing Ruminative and Distracting Responses and Emotion Regulation Difficulties in Early Community Adolescents With and Without Self-Harm.

Objectives: This study aimed to compare the demographic characteristics, responses to negative emotions, and difficulties in emotion regulation between self-harming adolescents and control individuals aged 12-14 years from the community. Methods: Data were collected from adolescents in Chungcheong Province, South Korea, between September 2021 and November 2022. Demographic characteristics and responses to the Depressed Mood Questionnaire and Difficulties in Emotion Regulation Scale-16 (DERS-16) were compared between the self-harm and control groups. Results: The self-harm group exhibited a higher prevalence of child abuse (odds ratio [OR]=4.787, 95% confidence interval [CI]=1.591-14.409, p=0.005) and school bullying victimization (OR=4.495, 95% CI=2.353-8.588, p<0.001) than those in the control group. The selfharm group displayed higher levels of rumination (t=7.88, p<0.001) and reduced distraction responses (reverse score t=2.25, p=0.025) than those of the control group. Additionally, the self-harm group scored higher on all subscales and the total DERS-16 score (t=7.61, p<0.001). Conclusion: Interventions for self-harming adolescents should address child abuse and bullying victimization. Prevention programs for self-harming adolescents should focus on reducing rumination responses, increasing distractive responses, and addressing difficulties in emotion regulation using dialectical behavior therapy-skill training.

Micropropagation and Shoot Tip Cryopreservation of 'Sunny Gold' Freesia.

Cryopreservation is a promising method for the long-term preservation of plant germplasm, especially for vegetatively propagated species like freesias. In this study, we investigate streamlining the cryopreservation process for 'Sunny Gold' Freesia, starting from effective in vitro initiation and proliferation using various plant growth regulator combinations. We also assess the impact of subculture on regrowth rates after cryopreservation. The shoot tips were successfully initiated in vitro after sterilization. The shoots were multiplied an average of three times in media containing N6-benzyladenine and kinetin. The regrowth rates of non-cryopreserved shoot tips excised from different subculture cycles did not differ significantly, with rates of 44% observed for plants from more than five subcultures and 47% for those from three subcultures. However, only the shoot tips excised from cultures subjected to three subculture cycles were able to recover after cryopreservation, with a regrowth rate of 31%. Our findings lay the groundwork for the development of an efficient cryopreservation protocol for freesias in the future.

A critical role for IRAK4 kinase activity in Toll-like receptor-mediated innate immunity.

IRAK4 is a member of IL-1 receptor (IL-1R)-associated kinase (IRAK) family and has been shown to play an essential role in Toll-like receptor (TLR)-mediated signaling. We recently generated IRAK4 kinase-inactive knock-in mice to examine the role of kinase activity of IRAK4 in TLR-mediated signaling pathways. The IRAK4 kinase-inactive knock-in mice were completely resistant to lipopolysaccharide (LPS)- and CpG-induced shock, due to impaired TLR-mediated induction of proinflammatory cytokines and chemokines. Although inactivation of IRAK4 kinase activity did not affect the levels of TLR/IL-1R-mediated nuclear factor kappaB activation, a reduction of LPS-, R848-, and IL-1-mediated mRNA stability contributed to the reduced cytokine and chemokine production in bone marrow-derived macrophages from IRAK4 kinase-inactive knock-in mice. Both TLR7- and TLR9-mediated type I interferon production was abolished in plasmacytoid dendritic cells isolated from IRAK4 knock-in mice. In addition, influenza virus-induced production of interferons in plasmacytoid DCs was also dependent on IRAK4 kinase activity. Collectively, our results indicate that IRAK4 kinase activity plays a critical role in TLR-dependent immune responses.

Advances in Polymer Binder Materials for Lithium-Ion Battery Electrodes and Separators.

Lithium-ion batteries (LIBs) have become indispensable energy-storage devices for various applications, ranging from portable electronics to electric vehicles and renewable energy systems. The performance and reliability of LIBs depend on several key components, including the electrodes, separators, and electrolytes. Among these, the choice of binder materials for the electrodes plays a critical role in determining the overall performance and durability of LIBs. This review introduces polymer binders that have been traditionally used in the cathode, anode, and separator materials of LIBs. Furthermore, it explores the problems identified in traditional polymer binders and examines the research trends in next-generation polymer binder materials for lithium-ion batteries as alternatives. To date, the widespread use of N-methyl-2-pyrrolidone (NMP) as a solvent in lithium battery electrode production has been a standard practice. However, recent concerns regarding its high toxicity have prompted increased environmental scrutiny and the imposition of strict chemical regulations. As a result, there is a growing urgency to explore alternatives that are both environmentally benign and safer for use in battery manufacturing. This pressing need is further underscored by the rising demand for diverse binder research within the lithium battery industry. In light of the current emphasis on sustainability and environmental responsibility, it is imperative to investigate a range of binder options that can align with the evolving landscape of green and eco-conscious battery production. In this review paper, we introduce various binder options that can align with the evolving landscape of environmentally friendly and sustainable battery production, considering the current emphasis on battery performance enhancement and environmental responsibility.

Multi-Block Copolymer Membranes Consisting of Sulfonated Poly(p-phenylene) and Naphthalene Containing Poly(arylene Ether Ketone) for Proton Exchange Membrane Water Electrolysis.

Glassy hydrocarbon-based membranes are being researched as a replacement for perfluorosulfonic acid (PFSA) membranes in proton exchange membrane water electrolysis (PEMWE). Here, naphthalene containing Poly(arylene Ether Ketone) was introduced into the Poly(p-phenylene)-based multi-block copolymers through Ni(0)-catalyzed coupling reaction to enhance π-π interactions of the naphthalene units. It is discovered that there is an optimum input ratio of the hydrophilic monomer and NBP oligomer for the multi-block copolymers with high ion exchange capacity (IEC) and polymerization yield. With the optimum input ratio, the naphthalene containing copolymer exhibits good hydrogen gas barrier property, chemical stability, and mechanical toughness, even with its high IEC value over 2.4 meq g-1. The membrane shows 3.6 times higher proton selectivity to hydrogen gas than Nafion 212. The PEMWE single cells using the membrane performed better (5.5 A cm-2) than Nafion 212 (4.75 A cm-2) at 1.9 V and 80 °C. These findings suggest that naphthalene containing copolymer membranes are a promising replacement for PFSA membranes in PEMWE.

Analysis of Floral Scent and Volatile Profiles of Different Aster Species by E-nose and HS-SPME-GC-MS.

Plants from the Aster species are known to be a rich source of bioactive chemical compositions and are popularly known for their medicinal properties. To investigate the relationship between the nine species of Aster, the floral fragrance and volatile profile patterns were characterized using E-nose and HS-SPME-GC-MS. Initial optimization for fragrance analysis was performed with Aster yomena using E-nose by evaluating the scent patterns in different flowering stages. Aster yomena exhibited varied scent patterns in each flowering stage, with the highest relative aroma intensity (RAI) in the full flowering stage. PCA analysis to compare and analyze the scent characteristics of nine Aster species, showed a species-specific classification. HS-SPME-GC-MS analysis of flowers from nine Aster species revealed 52 volatile compounds including ß-myrcene, α-phellandrene, D-limonene, trans-ß-ocimene, caryophyllene, and ß-cadinene. The terpenoid compounds accounted for the largest proportion. Among the nine Aster species flowers, Aster koraiensis had sesquiterpenes as the major component, and the remaining eight varieties had monoterpenes in abundance. These results could distinguish the species according to the scent patterns and volatile components of the nine Aster species. Additionally, flower extracts from the Aster species' plants exhibited radical scavenging antioxidant activity. Among them, it was confirmed that Aster pseudoglehnii, Aster maackii, and Aster arenarius had high antioxidant activity. In conclusion, the results of this study provide fundamental data of the volatile compound properties and antioxidant activity of Aster species, offering basic information of valuable natural sources that can be utilized in the pharmaceutical, perfume, and cosmetic industries.

Cognitive effects of a single dose of atypical antipsychotics in healthy volunteers compared with placebo or haloperidol.

Cognitive dysfunction in patients with schizophrenia is a strong correlate of poor outcome than any other symptom domain. To have greater knowledge about the effects of antipsychotics on cognitive function, subjects of this study were healthy volunteers who had no confounding variables typically found in patients with schizophrenia. The cognitive function of healthy volunteers in response to single doses of haloperidol, risperidone, aripiprazole, and amisulpride in a double-blind placebo-controlled trial was investigated. Assessments for the computerized neurocognitive test, mental and physical sedation, and extrapyramidal symptoms were performed within 1 week before (baseline) and approximately 4 hours after drug administration. Compared to the placebo, single administration of amisulpride at 400 mg in healthy volunteers enhanced word fluency test performance and remained intact after controlling for sedation and extrapyramidal symptoms. Significant improvement in some measurements of the computerized neurocognitive test was also observed in each antipsychotic-treated group but may have been related to practice effect. These findings suggest that amisulpride may have cognitive-enhancing effects in healthy volunteers.

Enhancement of the targeting capabilities of the Paclitaxel-loaded pluronic nanoparticles with a glycol chitosan/heparin composite.

An enhancement of tumor-targeting capability was demonstrated with paclitaxel (PTX)-loaded Pluronic nanoparticles (NPs) with immobilized glycol chitosan and heparin. The PTX-loaded Pluronic NPs were prepared as described in our previous report by means of a temperature-induced phase transition in a mixture of Pluronic F-68 and liquid polyethylene glycol (PEG; molecular weight: 400) containing PTX. The liquid PEG is used as the solubilizer of PTX, and Pluronic F-68 is the polymer that encapsulates the PTX. The glycol chitosan and heparin were immobilized on the surface of the Pluronic NPs in an aqueous medium, and a powdery form of the glycol chitosan/heparin immobilized Pluronic NPs (composite NPs) was obtained by freeze-drying. Field emission scanning electron microscopy and a particle size analyzer were used to observe the morphology and size distribution of the prepared NPs. To apply the composite NPs as a delivery system for the model anticancer drug PTX, the release pattern and pharmacokinetic parameters were observed, and the tumor growth was monitored by injecting the composite NPs into the tail veins of tumor-bearing mice. An enhancement of tumor-targeting capability of NPs was verified by using noninvasive live animal imaging technology to observe the time-dependent excretion profile, the in vivo biodistribution, circulation time, and the tumor-targeting capability of composite NPs.

Different safety profiles of risperidone and paliperidone extended-release: a double-blind, placebo-controlled trial with healthy volunteers.

OBJECTIVE: The present study investigated subjective experiences related to secondary negative symptoms and cognitive performance in healthy volunteers in response to the repeated administration of paliperidone extended-release (ER) and risperidone in a double-blind, placebo-controlled trial. METHODS: Participants (n = 32) received a fixed dose of one of three study medications for three consecutive days: 6 mg of paliperidone ER, 3 mg of risperidone, or placebo. Subjects were evaluated at baseline and after the first and third administrations of the medications by using the Neuroleptic-Induced Deficit Syndrome Scale and the Scale for the Assessment of Negative Symptoms. Cognitive function was measured at baseline and after the third administration of the medications by using the computerized neuropsychological test. RESULTS: Risperidone was associated with more detrimental subjective experiences compared with paliperidone ER and placebo (p < .05), and these differences persisted after controlling for mental and physical sedation. Analysis of computerized neuropsychological test variables revealed significant differences in the changes in Stroop word-color test results from baseline between the paliperidone ER and risperidone groups (p < .005) and between the placebo and risperidone groups (p < .005). CONCLUSIONS: These results suggest that paliperidone ER may have a better safety profile than risperidone in terms of negative subjective experiences and cognitive function among normal volunteers.

Paclitaxel-loaded poly(lactide-co-glycolide)/poly(ethylene vinyl acetate) composite for stent coating by ultrasonic atomizing spray.

The mixture of poly(lactide-co-glycolide) (PLGA) and poly(ethylene vinyl acetate) (PEVA) forms a homogeneous liquid in an organic solvent such as tetrahydrofuran, and a phase-separated PLGA/PEVA composite can be prepared from it by evaporating the organic solvent. Exploiting this phenomenon, we designed a novel method of preparing a drug-loaded PLGA/PEVA composite and used it for coating drug-eluting stents (DESs). Paclitaxel (PTX), an anticancer drug, was chosen as a model drug. PLGA acts as a microdepot for PTX, and PEVA provides mechanical strength to the coating material. The presence of PLGA in the PLGA/PEVA composite suppressed PTX crystallization in the coating material, and PTX showed a sustained release rate over more than 30 days. The mechanical strength of the PLGA/PEVA composite was better than that of PEVA used as a control. After coating the stent with a PLGA/PEVA composite using ultrasonic atomizing spray, the morphology of the coated material was observed by scanning electron microscopy, and the release pattern of PTX was measured by high-performance liquid chromatography.

Glycol chitosan/heparin immobilized iron oxide nanoparticles with a tumor-targeting characteristic for magnetic resonance imaging.

We described the preparation of the glycol chitosan/heparin immobilized iron oxide nanoparticles (composite NPs) as a magnetic resonance imaging agent with a tumor-targeting characteristic. The iron oxide nanoseeds used clinically as a magnetic resonance imaging agent were immobilized into the glycol chitosan/heparin network to form the composite NPs. To induce the ionic interaction between the iron oxide nanoseeds and glycol chitosan, gold was deposited on the surface of iron oxide nanoseeds. After the immobilization of gold-deposited iron oxide NPs into the glycol chitosan network, the NPs were stabilized with heparin based on the ionic interaction between cationic glycol chitosan and anionic heparin. FE-SEM (field emission-scanning electron microscopy) and a particle size analyzer were used to observe the formation of the stabilized composite NPs, and a Jobin-Yvon Ultima-C inductively coupled plasma-atomic emission spectrometer (ICP-AES) was used to measure the contents (%) of formed iron oxide nanoseeds as a function of reaction temperature and formed gold deposited on the iron oxide nanoparticles. We also evaluated the time-dependent excretion profile, in vivo biodistribution, circulation time, and tumor-targeting ability of the composite NPs using a noninvasive NIR fluorescence imaging technology. To observe the MRI contrast characteristic, the composite NPs were injected into the tail veins of tumor-bearing mice to demonstrate their selective tumoral distribution. The MR images were collected with conventional T(2)-weighted spin echo acquisition parameters.

Light-Responsive Polymeric Micellar Nanoparticles with Enhanced Formulation Stability.

Light-sensitive polymeric micelles have recently emerged as promising drug delivery systems for spatiotemporally controlled release of payload at target sites. Here, we developed diazonaphthoquinone (DNQ)-conjugated micellar nanoparticles that showed a change in polarity of the micellar core from hydrophobic to hydrophilic under UV light, releasing the encapsulated anti-cancer drug, doxetaxel (DTX). The micelles exhibited a low critical micelle concentration and high stability in the presence of bovine serum albumin (BSA) solution due to the hydrophobic and π-π stacking interactions in the micellar core. Cell studies showed enhanced cytotoxicity of DTX-loaded micellar nanoparticles upon irradiation. The enhanced stability would increase the circulation time of the micellar nanoparticles in blood, and enhance the therapeutic effectiveness for cancer therapy.