A surface-grafted hydrogel demonstrating thermoresponsive adhesive strength change.

Here, we designed a surface-grafted hydrogel (SG gel) that exhibits thermoresponsive changes in surface properties. Quantitative measurements using a self-made device showed that the adhesive strength between the SG gel surface and a Bakelite plate due to hydrophobic interaction changed significantly with temperature.

Random forest algorithms to classify frailty and falling history in seniors using plantar pressure measurement insoles: a large-scale feasibility study.

BACKGROUND: Frailty and falls are two adverse characteristics of aging that impair the quality of life of senior people and increase the burden on the healthcare system. Various methods exist to evaluate frailty, but none of them are considered the gold standard. Technological methods have also been proposed to assess the risk of falling in seniors. This study aims to propose an objective method for complementing existing methods used to identify the frail state and risk of falling in older adults. METHOD: A total of 712 subjects (age: 71.3 ± 8.2 years, including 505 women and 207 men) were recruited from two Japanese cities. Two hundred and three people were classified as frail according to the Kihon Checklist. One hundred and forty-two people presented with a history of falling during the previous 12 months. The subjects performed a 45 s standing balance test and a 20 m round walking trial. The plantar pressure data were collected using a 7-sensor insole. One hundred and eighty-four data features were extracted. Automatic learning random forest algorithms were used to build the frailty and faller classifiers. The discrimination capabilities of the features in the classification models were explored. RESULTS: The overall balanced accuracy for the recognition of frail subjects was 0.75 ± 0.04 (F1-score: 0.77 ± 0.03). One sub-analysis using data collected for men aged > 65 years only revealed accuracies as high as 0.78 ± 0.07 (F1-score: 0.79 ± 0.05). The overall balanced accuracy for classifying subjects with a recent history of falling was 0.57 ± 0.05 (F1-score: 0.62 ± 0.04). The classification of subjects relative to their frailty state primarily relied on features extracted from the plantar pressure series collected during the walking test. CONCLUSION: In the future, plantar pressures measured with smart insoles inserted in the shoes of senior people may be used to evaluate aspects of frailty related to the physical dimension (e.g., gait and balance alterations), thus allowing assisting clinicians in the early identification of frail individuals.

Effect of gait protocols and postoperative shoes on off-loading of forefoot in preoperative patients for forefoot disorders.

OBJECTIVES: The purpose of this study was to clarify the effect of gait protocols and postoperative shoes on forefoot load in preoperative patients for forefoot disorders and compare footwear comfort between different types of postoperative shoes. METHODS: Fourteen subjects scheduled to undergo forefoot surgeries were recruited. The maximum force under the forefoot region was measured during 10 m straight walking in two gait patterns with six different shoe types. Visual analogue scale (VAS) scores for footwear comfort, subjective lower thigh pain, and electrical activities of lower thigh muscles were also evaluated. RESULTS: The body weight-normalized maximum force under the forefoot region significantly decreased in step-to gait compared to normal gait regardless of the shoe types used. Under the same gait condition, no significant difference was observed in the forefoot off-loading effect between the different shoe types used. Significantly worse VAS scores, significantly higher tibialis anterior muscle activities, and complaints of lower thigh pain were demonstrated in the gait with the reverse camber shoe. CONCLUSIONS: Gait protocol of step-to gait had more forefoot off-loading effect than postoperative shoes. The forefoot off-loading effect did not differ among the postoperative shoes, suggesting that postoperative shoes can be selected with an emphasis on footwear comfort.

Autonomous Nanoscale Chemomechanical Oscillation on the Self-Oscillating Polymer Brush Surface by Precise Control of Graft Density.

As a novel functional surface, a self-oscillating polymer brush that undergoes autonomous, periodic swelling/deswelling during the Belousov-Zhabotinsky (BZ) reaction has been developed. Although extensive research has revealed how the fundamental aspects of the BZ reaction can be regulated based on the surface design of the self-oscillating polymer brush, design strategies for the induction of mechanical oscillation remain unexplored. Herein, we investigated the graft density effects on the phase transition behavior, which is an important design parameter for the mechanical oscillation of the modified polymer. The self-oscillating polymer-modified substrates with controlled graft densities were prepared by immobilizing various compositions of an initiator and a noninitiator followed by surface-initiated atom transfer radical polymerization of the self-oscillating polymer chains. In addition to the characterization of each prepared substrate, atomic force microscopy (AFM) and digital holographic microscopy (DHM) were employed to evaluate the density effects on the static and dynamic surface structures. AFM revealed that equilibrium swelling as well as thermoresponsive behavior is profoundly affected by the graft density. Moreover, using DHM, autonomous mechanical oscillation was captured only on the self-oscillating polymer brush with adequate graft density. Notably, the oscillation amplitude (150 nm) and the period (20 s) in this study were superior to those in a previous report on the self-oscillating polymer modified through the grafting-to method by 10- and 3-fold, respectively. This study presents design guidelines for future applications, such as autonomous transport devices.

Development of a Surgical Sponge Counting System Using Radiographic Images.

Background. Retention of surgical sponges in patients is a relatively frequent medical malpractice. To prevent it, the surgical sites are scanned using X-ray. However, using radiography in the operation room induces X-ray exposure for both patients and staff. To prevent such issues, a novel sponge counting system was developed. Each surgical sponge used in common hospitals is composed of single radiopaque fibers. Methods. The proposed system scans surgical sponges to estimate their fiber length (EFL) and returns the number of it. In this study, an optimal image acquisition protocol was determined that allows an accurate count of sponges. X-ray doses and multi-angle image procedures were tested. Results. Measurement trials were performed and compared for both dry and blood-soaked sponges. As a result, the X-ray dose of 50 kV and 600 µA and the acquisition of 180 images per sample yielded an accurate EFL. The 180-image protocol achieved good performance in this study and allowed counting of one package of 10 sponges in 226 seconds. For these settings, a significant correlation was found between the actual number of sponges and the estimated fiber lengths. Additionally, the performance of the system was similar for either dry or blood-soaked items. Conclusion. The proposed system could accurately count surgical sponges and is a promising option in preventing the accidental retention of surgical sponges.

Evaluation of Surgical Instruments With Radiofrequency Identification Tags in the Operating Room.

BACKGROUND: Surgical instrument retention and instrument breakage compromise surgery quality and lead to medical malpractice. We developed an instrument tracking system that could alert surgeons to instrument retention during surgery and monitor instrument use to reduce the risk of breakage. METHODS: This prospective, experimental clinical trial included 15 patients undergoing inguinal hernia surgery or lumpectomy under general anesthesia at Saiseikai Kurihashi Hospital. Radiofrequency identification (RFID)-tagged surgical instruments were used, and a detection antenna was placed on a mayo stand during the operation. We analyzed the 1-loop detection ratio (OLDR)-that is, the capability of the antenna to detect devices in a single reading-and the total detection rate (TDR)-that is, the data accumulated for the duration of the operation-of the RFID-tagged instruments. RESULTS: Data analysis revealed that the OLDR was 95% accurate, whereas the TDR was 100% accurate. The antenna could not detect the RFID tag when there was interference from electrocautery noise radiation, and 6% of instrument movement was undetected by the antenna; however, the TDR and instrument use were detected at all times. CONCLUSIONS: Surgical instruments can be tracked during surgery, and this tracking can clarify the usage rate of each instrument and serve as a backup method of instrument counting. However, this study was conducted on a small scale, and RFID tags cannot be attached to small surgical instruments used in complex operations such as neurosurgery. Further efforts to develop a tracking system for these instruments are warranted.

Management of surgical instruments with radio frequency identification tags.

PURPOSE: To prevent malpractices, medical staff has adopted inventory time-outs and/or checklists. Accurate inventory and maintenance of surgical instruments decreases the risk of operating room miscounting and malfunction. In our previous study, an individual management of surgical instruments was accomplished using Radio Frequency Identification (RFID) tags. The purpose of this paper is to evaluate a new management method of RFID-tagged instruments. DESIGN/METHODOLOGY/APPROACH: The management system of RFID-tagged surgical instruments was used for 27 months in clinical areas. In total, 13 study participants assembled surgical trays in the central sterile supply department. FINDINGS: While using the management system, trays were assembled 94 times. During this period, no assembly errors occurred. An instrument malfunction had occurred after the 19th, 56th, and 73 th uses, no malfunction caused by the RFID tags, and usage history had been recorded. Additionally, the time it took to assemble surgical trays was recorded, and the long-term usability of the management system was evaluated. ORIGINALITY/VALUE: The system could record the number of uses and the defective history of each surgical instrument. In addition, the history of the frequency of instruments being transferred from one tray to another was recorded. The results suggest that our system can be used to manage instruments safely. Additionally, the management system was acquired of the learning effect and the usability on daily maintenance. This finding suggests that the management system examined here ensures surgical instrument and tray assembly quality.

Demographic and clinical characteristics of patients with zinc deficiency: analysis of a nationwide Japanese medical claims database.

Zinc deficiency, affecting more than 2 billion people globally, poses a significant public health burden due to its numerous unfavorable effects, such as impaired immune function, taste and smell disorders, pneumonia, growth retardation, visual impairment, and skin disorders. Despite its critical role, extensive large-scale studies investigating the correlation between patient characteristics and zinc deficiency still need to be completed. We conducted a retrospective, cross-sectional observational study using a nationwide Japanese claims database from January 2019 to December 2021. The study population included 13,100 patients with available serum zinc concentration data, excluding individuals under 20 and those assessed for zinc concentrations after being prescribed zinc-containing medication. Significant associations with zinc deficiency were noted among older adults, males, and inpatients. Multivariate analysis, adjusting for age and sex, indicated significant associations with comorbidities, including pneumonitis due to solids and liquids with an adjusted Odds Ratio (aOR) of 2.959; decubitus ulcer and pressure area (aOR 2.403), sarcopenia (aOR 2.217), COVID-19 (aOR 1.889), and chronic kidney disease (aOR 1.835). Significant association with medications, including spironolactone (aOR 2.523), systemic antibacterials (aOR 2.419), furosemide (aOR 2.138), antianemic preparations (aOR 2.027), and thyroid hormones (aOR 1.864) were also found. These results may aid clinicians in identifying patients at risk of zinc deficiency, potentially improving care outcomes.

Objective Assessment of Physical Activity at Home Using a Novel Floor-Vibration Monitoring System: Validation and Comparison With Wearable Activity Trackers and Indirect Calorimetry Measurements.

BACKGROUND: The self-monitoring of physical activity is an effective strategy for promoting active lifestyles. However, accurately assessing physical activity remains challenging in certain situations. This study evaluates a novel floor-vibration monitoring system to quantify housework-related physical activity. OBJECTIVE: This study aims to assess the validity of step-count and physical behavior intensity predictions of a novel floor-vibration monitoring system in comparison with the actual number of steps and indirect calorimetry measurements. The accuracy of the predictions is also compared with that of research-grade devices (ActiGraph GT9X). METHODS: The Ocha-House, located in Tokyo, serves as an independent experimental facility equipped with high-sensitivity accelerometers installed on the floor to monitor vibrations. Dedicated data processing software was developed to analyze floor-vibration signals and calculate 3 quantitative indices: floor-vibration quantity, step count, and moving distance. In total, 10 participants performed 4 different housework-related activities, wearing ActiGraph GT9X monitors on both the waist and wrist for 6 minutes each. Concurrently, floor-vibration data were collected, and the energy expenditure was measured using the Douglas bag method to determine the actual intensity of activities. RESULTS: Significant correlations (P<.001) were found between the quantity of floor vibrations, the estimated step count, the estimated moving distance, and the actual activity intensities. The step-count parameter extracted from the floor-vibration signal emerged as the most robust predictor (r2=0.82; P<.001). Multiple regression models incorporating several floor-vibration-extracted parameters showed a strong association with actual activity intensities (r2=0.88; P<.001). Both the step-count and intensity predictions made by the floor-vibration monitoring system exhibited greater accuracy than those of the ActiGraph monitor. CONCLUSIONS: Floor-vibration monitoring systems seem able to produce valid quantitative assessments of physical activity for selected housework-related activities. In the future, connected smart home systems that integrate this type of technology could be used to perform continuous and accurate evaluations of physical behaviors throughout the day.

The future(s) of unpaid work: How susceptible do experts from different backgrounds think the domestic sphere is to automation?

The future of work has become a prominent topic for research and policy debate. However, the debate has focused entirely on paid work, even though people in industrialized countries on average spend comparable amounts of time on unpaid work. The objectives of this study are therefore (1) to expand the future of work debate to unpaid domestic work and (2) to critique the main methodology used in previous studies. To these ends, we conducted a forecasting exercise in which 65 AI experts from the UK and Japan estimated how automatable are 17 housework and care work tasks. Unlike previous studies, we applied a sociological approach that considers how experts' diverse backgrounds might shape their estimates. On average our experts predicted that 39 percent of the time spent on a domestic task will be automatable within ten years. Japanese male experts were notably pessimistic about the potentials of domestic automation, a result we interpret through gender disparities in the Japanese household. Our contributions are providing the first quantitative estimates concerning the future of unpaid work and demonstrating how such predictions are socially contingent, with implications to forecasting methodology.

Endoscope system with plasma flushing and coaxial round jet nozzle for off-pump cardiac surgery.

BACKGROUND: To develop a new endoscope for performing simple surgical tasks inside the blood-filled cardiac atrium/chamber, that is, "off-pump" cardiac surgeries. METHODS: We developed the endoscope system with plasma flushing and coaxial round jet nozzle. The "plasma flushing" system was invented to observe the interior of the blood-filled heart by displacing blood cells in front of the endoscope tip. However, some areas could not be observed with simple flushing of the liquid because the flushed liquid mixed with blood. Further, a large amount of liquid had to be flushed, which posed a risk of cardiac damage caused by excess volume. Therefore, to safely capture high-resolution images of the interior of the heart, an endoscope with a coaxial round jet nozzle through which plasma is flushed has been developed. And to reduce the volume of flushed liquid, the synchronization system of heartbeat and the endoscope system with plasma flushing has been developed. RESULTS: We conducted an in vivo experiment to determine whether we could observe intracardiac tissues in swine without the use of a heart-lung machine. As a result, we successfully observed intracardiac tissues without using a heart-lung machine. By using a coaxial nozzle, we could even observe the tricuspid valve. Moreover, we were able to save up to 30% of the flushed liquid by replacing the original system with a synchronization system. And we evaluated the performance of the endoscope with the coaxial round jet nozzle by conducting fluid analysis and an in vitro experiment. CONCLUSION: We successfully observed intracardiac tissues without using a heart-lung machine. By using a coaxial nozzle, we could even observe the tricuspid valve. And by replacing an original system to a synchronization system, we were able to save up to 30% of the flushed liquid. As a follow-up study, we plan to create a surgical flexible device for valve disease that can grasp, staple, and repair cardiac valves by endoscopic visualization.

A new simpler approach to measure the strength of toe plantar flexion requiring no mechanical restraint with a light-weight device.

Conventionally, the strength of toe plantar flexion (STPF) is measured in a seated position, in which not only the target toe joints but also the knee and particularly ankle joints, are usually restrained. We have developed an approach for the measurement of STPF which does not involve restraint and considers the interactions of adjacent joints of the lower extremities. This study aimed to evaluate this new approach and comparing with the seated approach. A thin, light-weight, rigid plate was attached to the sole of the foot in order to immobilize the toe area. Participants were 13 healthy young women (mean age: 24 ± 4 years). For measurement of STPF with the new approach, participants were instructed to stand, raise the device-wearing leg slightly, plantar flex the ankle, and push the sensor sheet with the toes to exert STPF. The sensor sheet of the F-scan II system was inserted between the foot sole and the plate. For measurement with the seated approach, participants were instructed to sit and push the sensor with the toes. They were required to maintain the hip, knee, and ankle joints at 90°. The mean values of maximum STPF of the 13 participants obtained with each approach were compared. There was no significant difference in mean value of maximum STPF when the two approaches were compared (new: 59 ± 23 N, seated: 47 ± 33 N). The coefficient of variation of maximum STPF was smaller for data obtained with the new approach (new: 39%, seated: 70%). Our simple approach enables measurement of STPF without the need for the restraints that are required for the conventional seated approach. These results suggest that the new approach is a valid method for measurement of STPF.

A 'Giving way' captured during walking by gyroscopes and plantar force sensors.

'Giving way' is a rapid inversion of the rear part of the foot, which does not result in an acute lateral ankle sprain. It is a specific event for patients with chronic ankle instability (CAI). This report described a 'giving way' in an 18-year-old female with CAI, which was biomechanically captured during walking on the flat surface. Shoes with unstable heel having a hemisphere rubber on the sole of the heel were used to provoke 'giving way'. To the authors' knowledge, this is the first report describing the kinetics of 'giving way' during walking. The event of 'giving way' was captured by an Inertial Motor Unit located on the dorsum of the foot and an insole-shaped plantar force measurement device. 'Giving way' provided distinctive data on both kinds of devices. Gyroscope data showed a rapid increase of inversion/plantarflexion/internal rotation (maximum levels: 204/280/346 degree/s) and following eversion/dorsiflexion/external rotation (maximum levels: 509/798/797 degree/s) of the foot segment at 350 ms - 492 ms after the heel strike. Plantar force data demonstrated the rapid decrease and subsequent recovery of the regional force on the head of 1st metatarsal head, suggesting a rapid inversion followed by the foot's defensive eversion. Although the maximum angular velocity of the inversion was smaller and the duration of inversion phase of 'giving way' was shorter than in previous reports, the characteristics of the following eversion phase of 'giving way' were consistent with earlier reports. The eversion must be a more specific phase than the inversion in the kinematics of 'giving way'.

Random forest algorithms for recognizing daily life activities using plantar pressure information: a smart-shoe study.

BACKGROUND: Wearable activity trackers are regarded as a new opportunity to deliver health promotion interventions. Indeed, while the prediction of active behaviors is currently primarily relying on the processing of accelerometer sensor data, the emergence of smart clothes with multi-sensing capacities is offering new possibilities. Algorithms able to process data from a variety of smart devices and classify daily life activities could therefore be of particular importance to achieve a more accurate evaluation of physical behaviors. This study aims to (1) develop an activity recognition algorithm based on the processing of plantar pressure information provided by a smart-shoe prototype and (2) to determine the optimal hardware and software configurations. METHOD: Seventeen subjects wore a pair of smart-shoe prototypes composed of plantar pressure measurement insoles, and they performed the following nine activities: sitting, standing, walking on a flat surface, walking upstairs, walking downstairs, walking up a slope, running, cycling, and completing office work. The insole featured seven pressure sensors. For each activity, at least four minutes of plantar pressure data were collected. The plantar pressure data were cut in overlapping windows of different lengths and 167 features were extracted for each window. Data were split into training and test samples using a subject-wise assignment method. A random forest model was trained to recognize activity. The resulting activity recognition algorithms were evaluated on the test sample. A multi hold-out procedure allowed repeating the operation with 5 different assignments. The analytic conditions were modulated to test (1) different window lengths (1-60 seconds), (2) some selected sensor configurations and (3) different numbers of data features. RESULTS: A window length of 20 s was found to be optimum and therefore used for the rest of the analysis. Using all the sensors and all 167 features, the smart shoes predicted the activities with an average success of 89%. "Running" demonstrated the highest sensitivity (100%). "Walking up a slope" was linked with the lowest performance (63%), with the majority of the false negatives being "walking on a flat surface" and "walking upstairs." Some 2- and 3-sensor configurations were linked with an average success rate of 87%. Reducing the number of features down to 20 does not alter significantly the performance of the algorithm. CONCLUSION: High-performance human behavior recognition using plantar pressure data only is possible. In the future, smart-shoe devices could contribute to the evaluation of daily physical activities. Minimalist configurations integrating only a small number of sensors and computing a reduced number of selected features could maintain a satisfying performance. Future experiments must include a more heterogeneous population.

HPMCs induce greater intercellular delocalization of tight junction-associated proteins due to a higher susceptibility to H2O2 compared with HUVECs.

BACKGROUND: Reactive oxygen species (ROS) have been speculated as possible inducers of structural or functional changes that lead to a hyperpermeable state in patients on long-term peritoneal dialysis. This study aimed to compare localization of tight junction-associated proteins (TJPs), which relate to solute permeability characteristics, between human peritoneal mesothelial cell (HPMC) monolayers and human umbilical vein endothelial cell (HUVEC) monolayers under oxidative stress. METHODS: HPMCs and HUVECs were cultured on a polymer mesh until transepithelial electrical resistance reached a plateau. Solute permeation tests were conducted using FITC-labeled dextrans. Localization of TJPs was observed under a confocal laser scanning microscope. These experiments were carried out with/without 0.1 mmol/L H(2)O(2). In addition, ROS production as well as the amounts of intracellular reductive glutathione (GSH) and oxidative glutathione were measured. RESULTS: When the monolayers were exposed to 0.1 mmol/L H(2)O(2)/medium for 2 hours, the HPMC monolayer revealed a significant reduction in transepithelial electrical resistance (from 32.5 +/- 3.4 to 17.4 +/- 4.9 Omega.cm(2)) with delocalization of TJPs, particularly occludins. The HUVEC monolayer remained stable and exhibited an unremarkable change in TJP organization. Compared to the HUVEC monolayer, the HPMC monolayer exhibited two- to threefold higher 2',7'-dichlorofluorescein intensities that increased in a dose-dependent manner. HUVECs contained approximately 2.5-times more GSH than HPMCs. This supported the lesser production of ROS when exposed to 0.1 mmol/L H(2)O(2) for 24 hours. HUVECs used 8.03 nmol/mg GSH protein to maintain TJP localization, while only 3.75 nmol/mg GSH protein was available for the HPMCs. CONCLUSION: The HUVEC monolayer, which was less permeable to middle-to-high molecular weight solutes, was more tolerant against ROS stress than the HPMC monolayer. Availability of intracellular GSH is an important issue in maintaining the integrity of the mesothelium.

Development of intraoperative plantar pressure measuring system considering weight bearing axis.

PURPOSE: Surgical reconstructions in three dimensions are needed for treatment of foot and ankle deformities. However, surgical results might be influenced by the skill and experience of doctors which complement the limited information for reconstructions in three dimensions. To solve these, studies were carried out to measure plantar pressure distribution during surgery. Though, it was impossible to accurately measure plantar pressure distribution accurately during operation. Therefore, we proposed an intraoperative plantar pressure measurement (IPPM) device that enables proper navigation in the push direction. METHODS: For this purpose, first, we investigated how the physiological load axis passes through the human body to identify the pushing direction of the pressure sensor of the device toward the patient's foot. In particular, we hypothesized that the physiological load axis passes through the femoral head center and we evaluated this in a measurement experiment with nine healthy subjects. Second, based on these results, we developed the IPPM device that has two force sensors to identify the pushing direction toward the femoral head center and a conductive ink sensor to measure plantar pressure distribution. Finally, we conducted the experiments with nine healthy subjects and two users. RESULTS: From the first experimental results, the physiological load axis was found to pass through the femoral head center in normal standing posture. From the evaluation experiment, there are no significant differences statistically in plantar pressure distributions between the conditions of using IPPM device and without using it for both a medical student and a surgeon. However, in some cases the plantar pressure distribution can be reproduced similarly to that of the standing posture, and also from the evaluation experiment concerning the relation between CoP position and NCC, the NCC tends to increase when the position of the CoP is closer to that at the standing posture. CONCLUSION: The IPPM device has possibility to reproduce the plantar pressure distribution during surgery and prevent the recurrence of surgical complications.

Corrosion Generation and Cleaning Effect on Surgical Instruments with Attached Radiofrequency Identification Tags in Long-Term Usage.

Background: Faulty cleaning of surgical instruments may lead to corrosion damage and a higher risk of surgical site infection. We have developed a method in which each instrument has an attached radiofrequency identification (RFID) tag for individual management. However, because of the structure of the instruments, a risk of corrosion from poor cleaning exists; therefore, observation during long-term usage is necessary. Methods: The cleaning effect at the jig of the RFID tag was verified by the amount of residual protein left by various cleaning methods. In our investigation of long-term usage, we examined 94 surgical instruments with RFID tags used in the operating room for 50 months employing a microscope to identify any corrosion at the jig. Results: The method using a washer disinfector (WD) was found to be highly effective. From observation after long-term usage, friction by the RFID tag occurred in about 70% of the jigs. However, no pitting or general corrosion was seen. Conclusions: When WD is used properly, there is only a minor risk of residual protein, and corrosion does not occur even with long-term use. By using surgical instruments with RFID tags, it is possible to determine the number of uses and the history at the individual level. This facilitates operation of safe surgical instruments by limiting the number of times a particular instrument is used.

Multi-frequency bioelectrical impedance analysis of skin rubor with two-electrode technique.

BACKGROUND: Skin rubor, or reddish discoloration on skin, is a sign of irritation. Physiologically it involves temporary vasodilation and hyperaemia in tissue, and is diagnosed by the visible characteristics. PURPOSE: Bioelectrical impedance analysis (BIA) was tested to estimate skin rubor. METHODS: Five healthy women (22-25 years) participated in the experiments. Four were ethanol patch test (EPT)-positive; one was negative. A skin rubor was developed on the subjects' left forearm by temporary vasodilatation, which was caused by a dermal inflammation reaction due to application of ethanol to the skin. BIA was then conducted for the skin rubor and the intact skin using a lock-in amplifier with a frequency range of 0.1Hz-10kHz. The impedance changes due to vasodilatation of capillary were evaluated. RESULTS: The resistance of the skin rubor was found to decrease to almost 90% of the resistance and 87% of the reactance of the intact skin in the EPT-positive subjects. There was no impedance change in the EPT-negative subject. Through these experiments, skin rubor could be distinguished from intact skin based on the electrical impedance. CONCLUSION: Skin rubor could be identified based on the bioelectrical impedance. This method would be used for various skin diagnoses due to simplicity and reliability of BIA.

Heart rate measurement based on a time-lapse image.

Using a time-lapse image acquired from a CCD camera, we developed a non-contact and non-invasive device, which could measure both the respiratory and pulse rate simultaneously. The time-lapse image of a part of the subject's skin was consecutively captured, and the changes in the average image brightness of the region of interest (ROI) were measured for 30s. The brightness data were processed by a series of operations of interpolation as follows a first-order derivative, a low pass filter of 2 Hz, and a sixth-order auto-regressive (AR) spectral analysis. Fourteen sound and healthy female subjects (22-27 years of age) participated in the experiments. Each subject was told to keep a relaxed seating posture with no physical restriction. At the same time, heart rate was measured by a pulse oximeter and respiratory rate was measured by a thermistor placed at the external naris. Using AR spectral analysis, two clear peaks could be detected at approximately 0.3 and 1.2 Hz. The peaks were thought to correspond to the respiratory rate and the heart rate. Correlation coefficients of 0.90 and 0.93 were obtained for the measurement of heart rate and respiratory rate, respectively.