Preparation and enzymatic degradation of porous crosslinked polylactides of biomass origin.

To understand the enzymatic degradation behavior of crosslinked polylactide (PLA), the preparation and enzymatic degradation of both thermoplastic (linear) and crosslinked PLAs that have pore structures with different dimensions were carried out. The porous structures of the linear PLA samples were of micro and nanoporous nature, and prepared by batch foaming with supercritical CO2 and compared with the porous structures of crosslinked PLA (Lait-X) created by the salt leaching method. The surface and cross-sectional morphologies of the porous structures were investigated by using scanning electron microscopy. The morphological analysis of porous Lait-X showed a rapid loss of physical features within 120 h of exposure to proteinase-K enzymatic degradation at 37 °C. Due to the higher affinity for water, enhanced enzymatic activity as compared to the linear PLA porous structures in the micro and nanoporous range was observed.

Biomineralization of hydroxyapatite on DNA molecules in SBF: morphological features and computer simulation.

The hydroxyapatite (HA) formation on the DNA molecules in SBF was examined. After immersion for four weeks in SBF at 36.5 °C, the HA crystallites of ~1-14 µm in diameter grew on the surface of DNA molecules. Various morphologies were successfully observed through scanning electron microscopy analysis. The Ca/P mol ratio (1.1-1.5) in HA was estimated by energy dispersive X-ray analysis. Original peaks of both of DNA and HA were characterized by Fourier transform infrared spectroscopy. The molecular orbital computer simulation has been used to probe the interaction of DNA with two charge-balancing ions, i.e., CaOH(+) and CaH2PO4(+). The adsorption enthalpy of the two ions on ds-DNA and/or ss-DNA having large negative value (~ -60 kcal/mol per charge-balancing ion) was the evidence for the interface in mineralization of HA in SBF.

Effect of Substrate Stiffness on Physicochemical Properties of Normal and Fibrotic Lung Fibroblasts.

The presented research aims to verify whether physicochemical properties of lung fibroblasts, modified by substrate stiffness, can be used to discriminate between normal and fibrotic cells from idiopathic pulmonary fibrosis (IPF). The impact of polydimethylsiloxane (PDMS) substrate stiffness on the physicochemical properties of normal (LL24) and IPF-derived lung fibroblasts (LL97A) was examined in detail. The growth and elasticity of cells were assessed using fluorescence microscopy and atomic force microscopy working in force spectroscopy mode, respectively. The number of fibroblasts, as well as their shape and the arrangement, strongly depends on the mechanical properties of the substrate. Moreover, normal fibroblasts remain more rigid as compared to their fibrotic counterparts, which may indicate the impairments of IPF-derived fibroblasts induced by the fibrosis process. The chemical properties of normal and IPF-derived lung fibroblasts inspected using time-of-flight secondary ion mass spectrometry, and analyzed complexly with principal component analysis (PCA), show a significant difference in the distribution of cholesterol and phospholipids. Based on the observed distinctions between healthy and fibrotic cells, the mechanical properties of cells may serve as prospective diagnostic biomarkers enabling fast and reliable identification of idiopathic pulmonary fibrosis (IPF).

Cellular Morphology-Mediated Proliferation and Drug Sensitivity of Breast Cancer Cells.

The interpretation of the local microenvironment of the extracellular matrix for malignant tumor cells is in intimate relation with metastatic spread of cancer cells involving the associated issues of cellular proliferation and drug responsiveness. This study was aimed to assess the combination of both surface topographies (fiber alignments) and different stiffness of the polymeric substrates (poly(l-lactic acid) and poly(ε-caprolactone), PLLA and PCL, respectively) as well as collagen substrates (coat and gel) to elucidate the effect of the cellular morphology on cellular proliferation and drug sensitivities of two different types of breast cancer cells (MDA-MB-231 and MCF-7). The morphological spreading parameter (nucleus/cytoplasm area ratio) induced by the anthropogenic substrates has correlated intimately with the cellular proliferation and the drug sensitivity the half maximal inhibitory concentration (IC50) of cancer cells. This study demonstrated the promising results of the parameter for the evaluation of cancer cell malignancy.

Comprehensive study on cellular morphologies, proliferation, motility, and epithelial-mesenchymal transition of breast cancer cells incubated on electrospun polymeric fiber substrates.

The progress of microenvironment-mediated tumor progression in an artificial extracellular matrix explores the design criteria to understand the cancer progression mechanism and metastatic potential. This study was aimed at examining the combination of both surface topographies (fiber alignments) and different stiffness of polymeric substrates (PLLA and PCL) to evaluate the effects on the cellular morphologies, proliferation, motility, and gene expression regarding epithelial to mesenchymal transition (EMT) of two different types of breast cancer cells (MDA-MB-231 and MCF-7). The cellular morphologies (roundness and nuclear elongation factor), E-cadherin and vimentin expression, and cellular motility in terms of cellular migration speed, persistent time, and diffusivity have been comprehensively discussed. We demonstrated that the microenvironment of cell culture substrates influences cancer progression and metastatic potential.

New poly(butylene succinate)/layered silicate nanocomposites: preparation and mechanical properties.

New poly(butylene succinate) (PBS)/layered silicate nanocomposites have been successfully prepared by simple melt extrusion of PBS and octadecylammonium modified montmorillonite (C18-mmt) at 150 degrees C. The d-spacing of both C18-mmt and intercalated nanocomposites was investigated by wide-angle X-ray diffraction analysis. Bright-field transmission electron microscopic study showed several stacked silicate layers with random orientation in the PBS matrix. The intercalated nanocomposites exhibited remarkable improvement of mechanical properties in both solid and melt states as compared with that of PBS matrix without clay.

Biodegradable polylactide/montmorillonite nanocomposites.

Our continuing research on the preparation, characterization, materials properties, and biodegradability of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites has yielded results on PLA/montmorillonite nanocomposites. Montmorillonite (mmt) modified with dimethyldioctadecylammonium cation was used as an OMLS for nanocomposite preparation. The internal structure of nanocomposites on the nanometer scale was established with the use of wide-angle X-ray diffraction patterns and transmission electron micrographic observation. All nanocomposites exhibited significant improvement in crystallization behavior, mechanical properties, flexural properties, heat distortion temperature, and O2 gas permeability when compared with pure PLA.

Preparation and characterization of DNA/allophane composite hydrogels.

The preparation and characterization of the composite hydrogels based on double-stranded deoxyribonucleic acid (DNA) and natural allophane (AK70) were reported. To understand the propensity of the natural allophane to adsorb the DNA molecules, using zeta potential measurement, Fourier transform infrared spectroscopy (FTIR) and electrophoresis analyses assessed the adsorption characteristics. The freeze-dried DNA/AK70 hydrogels were demonstrated that the DNA bundle structure with a width of ∼2µm and a length of ∼15-20µm was wrapped around the clustered allophane particles as revealed by FE-SEM/EDX analysis. The incorporation of AK70 in hydrogels induced the increase in the enthalpy of the helix-coil transition of DNA duplex due to the restricted molecular motions of the DNA duplex facilitated by the interaction between the phosphate groups of DNA and the protonated (+)(OH2)Al(OH2) groups on the wall perforations of the allophane.

DNA adsorption characteristics of hollow spherule allophane nano-particles.

To understand the propensity of natural allophane to adsorb the DNA molecules, the adsorption characteristics were assessed against natural allophane (AK70), using single-stranded DNA (ss-DNA) and adenosine 5'-monophosphate (5'-AMP) as a reference molecule. The adsorption capacity of ss-DNA on AK70 exhibited one order of magnitude lower value as compared with that of 5'-AMP. The adsorption capacity of ss-DNA decreased with increasing pH due to the interaction generated between phosphate groups of ss-DNA and functional Al-OH groups on the wall perforations through deprotonating, associated with higher energy barrier for the adsorption of ss-DNA. The adsorption morphologies consisting of the individual ss-DNA with mono-layer coverage of the clustered allophane particle were observed successfully through transmission electron microscopy analysis.

Efficiencies of singlet oxygen production and rate constants for oxygen quenching in the S1 state of dicyanonaphthalenes and related compounds.

The quantum yield of singlet oxygen ((1)O(2) ((1)Delta(g))) production (Phi(Delta)) in the oxygen quenching of photoexcited states for 1,2-dicyanonaphthalene (1,2-DCNN), 1,4-dicyanonaphthalene (1,4-DCNN) and 2,3-dicyanonaphthalene (2,3-DCNN) in cyclohexane, benzene, and acetonitrile was measured using a time-resolved thermal lens (TRTL) technique, in order to determine the efficiency of singlet oxygen ((1)Delta(g)) production in the first excited singlet state (S(1)), (f(Delta)(S)). The efficiencies of singlet oxygen ((1)Delta(g)) production from the lowest triplet state (T(1)), (f(Delta)(T)), were nearly unity for all DCNNs in all the solvents. The values of f(Delta)(S) were fairly large for 1,2-DCNN (0.33-0.57) and 1,4-DCNN (0.33-0.66), but were close to zero for 2,3-DCNN. Rate constants for oxygen quenching in the S(1) state (k(q)(S)) obtained for these compounds were significantly smaller than diffusion-controlled rate constants. The kinetics for processes leading to production and no production of singlet oxygen is discussed on the basis of the values of f(Delta)(S) and k(q)(S). The results obtained regarding phenanthrene (PH), 9-cyanophenanthrene (9-CNPH), pyrene (PY) and 1-cyanopyrene (1-CNPY) are also discussed.

Solvent and pressure effects on quenching by oxygen of 9,10-dimethylanthracene fluorescence in liquid n-alkanes: a study on solvent cage effects.

The fluorescence quenching by oxygen of 9,10-dimethylanthracene (DMEA) in liquid ethane and propane at pressures up to 60 MPa and 25 degrees C was investigated. The apparent activation volumes for the quenching rate constant, k(q),DeltaV++(q) , were 5.0 +/- 3.4 and 7.4 +/- 1.0 cm(3)/mol, whereas those for the solvent viscosity, eta,DeltaV++(eta) , were 190 +/- 22 and 42 +/- 1 cm(3)/mol in ethane and propane at 6.0 MPa, respectively. These results were discussed together with those in n-alkanes (C(4)-C(7)) and methylcyclohexane (MCH) that were previously reported, and it was found that DeltaV++(q) increases monotonically but DeltaV++(eta) decreases rapidly with increasing the number of carbon atoms in n-alkanes. The plot of ln k(q) against ln eta showed a leveling-off with decreasing eta. These observations were analyzed satisfactorily by the pressure dependence of the solvent viscosity on k(q) coupled with that of the radial distribution function, g(sigma), at contact with a hard sphere assumption. The apparent bimolecular rate constant, k(bim,0), for the quenching in the solvent cage was evaluated by extrapolating to g(sigma)eta = 0 in the plot of g(sigma)/k(q) against g(sigma)eta, and it was found that k(bim,0) decreased with increasing the radius of the solvent molecule. From the solvent size dependence of k(bim,0), the solvent cage effect was discussed phenomenologically.