RESUMO
Experiments were undertaken to develop a relationship between bubble size and acoustic-emission amplitude for a vertical stream of water impacting a water pool. A particular focus is the formation of the discrete bubbles. Although the relationship between bubble diameter and the natural frequency of sound emissions has been established through Minnaert's work, a comprehensive investigation into the amplitude of sound emissions is missing. Air bubbles were generated from the impact of falling-water streams of varying diameters on an underlying water pool and their acoustic emissions were recorded using a nearby hydrophone. Sound amplitude was found to increase monotonically with bubble size. A second-order polynomial relationship between logarithmic acoustic sound pressure level (L) and bubble diameter (Db) was found, L=-0.0401Db2+1.5781Db+110.7225 within the ±3 dB margin of error. The relationship between linear sound pressure level (P) and bubble diameter (Db) is expressed by the equation P=0.0059Db2+0.0505Db+0.3591, within the ±3 dB margin of error. Results demonstrate that larger bubbles (D > 4 mm) exhibit noise emissions similar to bubbles produced by other mechanisms, such as the underwater nozzle, while smaller diameters tend to produce higher noise levels compared to the same mechanism.
RESUMO
BACKGROUND: Supraphysiological hemodynamics are a recognized driver of platelet activation and thrombosis at high-grade stenosis and in blood contacting circulatory support devices. However, whether platelets mechano-sense hemodynamic parameters directly in free flow (in the absence of adhesion receptor engagement), the specific hemodynamic parameters at play, the precise timing of activation, and the signaling mechanism(s) involved remain poorly elucidated. RESULTS: Using a generalized Newtonian computational model in combination with microfluidic models of flow acceleration and quasi-homogenous extensional strain, we demonstrate that platelets directly mechano-sense acute changes in free-flow extensional strain independent of shear strain, platelet amplification loops, von Willebrand factor, and canonical adhesion receptor engagement. We define an extensional strain sensing "mechanosome" in platelets involving cooperative Ca2+ signaling driven by the mechanosensitive channel Piezo1 (as the primary strain sensor) and the fast ATP gated channel P2X1 (as the secondary signal amplifier). We demonstrate that type II PI3 kinase C2α activity (acting as a "clutch") couples extensional strain to the mechanosome. CONCLUSIONS: Our findings suggest that platelets are adapted to rapidly respond to supraphysiological extensional strain dynamics, rather than the peak magnitude of imposed wall shear stress. In the context of overall platelet activation and thrombosis, we posit that "extensional strain sensing" acts as a priming mechanism in response to threshold levels of extensional strain allowing platelets to form downstream adhesive interactions more rapidly under the limiting effects of supraphysiological hemodynamics.
Assuntos
Ativação Plaquetária , Trombose , Plaquetas/metabolismo , Hemodinâmica , Humanos , Canais Iônicos , Estresse Mecânico , Fator de von Willebrand/metabolismoRESUMO
There is a need for scalable automated lab-on-chip systems incorporating precise hemodynamic control that can be applied to high-content screening of new more efficacious antiplatelet therapies. This paper reports on the development and characterization of a novel active micropump-mixer microfluidic to address this need. Using a novel reciprocating elastomeric micropump design, we take advantage of the flexible structural and actuation properties of this framework to manage the hemodynamics for on-chip platelet thrombosis assay on type 1 fibrillar collagen, using whole blood. By characterizing and harnessing the complex three-dimensional hemodynamics of the micropump operation in conjunction with a microvalve controlled reagent injection system we demonstrate that this prototype can act as a real-time assay of antiplatelet drug pharmacokinetics. In a proof-of-concept preclinical application, we utilize this system to investigate the way in which rapid dosing of human whole blood with isoform selective inhibitors of phosphatidylinositol 3-kinase dose dependently modulate platelet thrombus dynamics. This modular system exhibits utility as an automated multiplexable assay system with applications to high-content chemical library screening of new antiplatelet therapies.
Assuntos
Indometacina/sangue , Dispositivos Lab-On-A-Chip , Técnicas Analíticas Microfluídicas , Inibidores da Agregação Plaquetária/sangue , Plaquetas/efeitos dos fármacos , Hemodinâmica , Humanos , Indometacina/farmacocinética , Técnicas Analíticas Microfluídicas/instrumentação , Inibidores da Agregação Plaquetária/farmacocinéticaRESUMO
Incomplete stent apposition (ISA) is one of the causes leading to poststent complications, which can be found when an undersized or an underexpanded stent is deployed at lesions. The previous research efforts have focused on ISA in idealized coronary arterial geometry with circular cross section. However, arterial cross section eccentricity plays an important role in both location and severity of ISA. Computational fluid dynamics (CFD) simulations are carried out to systematically study the effects of ISA in arteries with elliptical cross section, as such stents are partially embedded on the minor axis sides of the ellipse and malapposed elsewhere. Overall, ISA leads to high time-averaged wall shear stress (TAWSS) at the proximal end of the stent and low TAWSS at the ISA transition region and the distal end. Shear rate depends on both malapposition distance and blood stream locations, which is found to be significantly higher at the inner stent surface than the outer surface. The proximal high shear rate signifies increasing possibility in platelet activation, when coupled with low TAWSS at the transition and distal regions which may indicate a nidus for in-stent thrombosis.
RESUMO
Aims: As a sine qua non for arterial wall physiology, local hemodynamic forces such as endothelial shear stress (ESS) may influence long-term vessel changes as bioabsorbable scaffolds dissolve. The aim of this study was to perform serial computational fluid dynamic (CFD) simulations to examine immediate and long-term haemodynamic and vascular changes following bioresorbable scaffold placement. Methods and results: Coronary arterial models with long-term serial assessment (baseline and 5 years) were reconstructed through fusion of intravascular optical coherence tomography and angiography. Pulsatile non-Newtonian CFD simulations were performed to calculate the ESS and relative blood viscosity. Time-averaged, systolic, and diastolic results were compared between follow-ups. Seven patients (seven lesions) were included in this analysis. A marked heterogeneity in ESS and localised regions of high blood viscosity were observed post-implantation. Percent vessel area exposed to low averaged ESS (<1 Pa) significantly decreased over 5 years (15.92% vs. 4.99%, P < 0.0001) whereas moderate (1-7 Pa) and high ESS (>7 Pa) did not significantly change (moderate ESS: 76.93% vs. 80.7%, P = 0.546; high ESS: 7.15% vs. 14.31%, P = 0.281), leading to higher ESS at follow-up. A positive correlation was observed between baseline ESS and change in lumen area at 5 years (P < 0.0001). Maximum blood viscosity significantly decreased over 5 years (4.30 ± 1.54 vs. 3.21± 0.57, P = 0.028). Conclusion: Immediately after scaffold implantation, coronary arteries demonstrate an alternans of extremely low and high ESS values and localized areas of high blood viscosity. These initial local haemodynamic disturbances may trigger fibrin deposition and thrombosis. Also, low ESS can promote neointimal hyperplasia, but may also contribute to appropriate scaffold healing with normalisation of ESS and reduction in peak blood viscosity by 5 years.
Assuntos
Implantes Absorvíveis , Vasos Coronários/patologia , Vasos Coronários/fisiopatologia , Endotélio Vascular/patologia , Endotélio Vascular/fisiopatologia , Modelos Cardiovasculares , Alicerces Teciduais , Fenômenos Biomecânicos , Vasos Coronários/cirurgia , Endotélio Vascular/cirurgia , Hidrodinâmica , Imageamento Tridimensional , Estresse Mecânico , Fatores de Tempo , Tomografia de Coerência ÓpticaRESUMO
One particular complexity of coronary artery is the natural tapering of the vessel with proximal segments having larger caliber and distal tapering as the vessel get smaller. The natural tapering of a coronary artery often leads to proximal incomplete stent apposition (ISA). ISA alters coronary hemodynamics and creates pathological path to develop complications such as in-stent restenosis, and more worryingly, stent thrombosis (ST). By employing state-of-the-art computer-aided design software, generic stent hoops were virtually deployed in an idealized tapered coronary artery with decreasing malapposition distance. Pulsatile blood flow simulations were carried out using computational fluid dynamics (CFD) on these computer-aided design models. CFD results reveal unprecedented details in both spatial and temporal development of microrecirculation environments throughout the cardiac cycle (CC). Arterial tapering also introduces secondary microrecirculation. These primary and secondary microrecirculations provoke significant fluctuations in arterial wall shear stress (WSS). There has been a direct correlation with changes in WSS and the development of atherosclerosis. Further, the presence of these microrecirculations influence strongly on the local levels of blood viscosity in the vicinity of the malapposed stent struts. The observation of secondary microrecirculations and changes in blood rheology is believed to complement the wall (-based) shear stress, perhaps providing additional physical explanations for tissue accumulation near ISA detected from high resolution optical coherence tomography (OCT).
Assuntos
Viscosidade Sanguínea , Vasos Coronários/fisiologia , Microcirculação , Stents , Simulação por Computador , Hidrodinâmica , Estresse MecânicoRESUMO
"Controlled particle release and targeting" is a technique using particle release score map (PRSM) and transient particle release score map (TPRSM) via backtracking to determine optimal drug injection locations for achieving an enhanced target efficiency (TE). This paper investigates the possibility of targeting desired locations through an idealized but complex three-dimensional (3D) vascular tree geometry under realistic hemodynamic conditions by imposing a Poiseuille velocity profile and a Womersley velocity profile derived from cine phase contrast magnetic resonance imaging (MRI) data for steady and pulsatile simulations, respectively. The shear thinning non-Newtonian behavior of blood was accounted for by the Carreau-Yasuda model. One-way coupled Eulerian-Lagrangian particle tracking method was used to record individual drug particle trajectories. Particle size and density showed negligible influence on the particle fates. With the proposed optimal release scoring algorithm, multiple optimal release locations were determined under steady flow conditions, whereas there was one unique optimal release location under pulsatile flow conditions. The initial in silico results appear promising, showing on average 66% TE in the pulsatile simulations, warranting further studies to improve the mathematical model and experimental validation.
Assuntos
Vasos Sanguíneos/anatomia & histologia , Vasos Sanguíneos/fisiologia , Sistemas de Liberação de Medicamentos/métodos , Modelos Cardiovasculares , Algoritmos , Preparações de Ação Retardada , Humanos , Imageamento por Ressonância Magnética , Fluxo PulsátilAssuntos
Vasos Coronários , Hemodinâmica/fisiologia , Modelos Cardiovasculares , Fenômenos Biomecânicos/fisiologia , Doença da Artéria Coronariana/diagnóstico por imagem , Doença da Artéria Coronariana/fisiopatologia , Vasos Coronários/diagnóstico por imagem , Vasos Coronários/fisiologia , Hemorreologia/fisiologia , Humanos , Imageamento Tridimensional , Estresse MecânicoRESUMO
The endovascular neural interface provides an appealing minimally invasive alternative to invasive brain electrodes for recording and stimulation. However, stents placed in blood vessels have long been known to affect blood flow (haemodynamics) and lead to neointimal growth within the blood vessel. Both the stent elements (struts and electrodes) and blood vessel wall geometries can affect the mechanical environment on the blood vessel wall, which could lead to unfavourable vascular remodelling after stent placement. With increasing applications of stents and stent-like neural interfaces in venous blood vessels in the brain, it is necessary to understand how stents affect blood flow and tissue growth in veins. We explored the haemodynamics of a stent-mounted neural interface in a blood vessel model. Results indicated that blood vessel deformation and tapering caused a substantial change to the lumen geometry and the haemodynamics. The neointimal proliferation was evaluated in sheep implanted with an endovascular neural interface. Analysis showed a negative correlation with the mean Wall Shear Stress pattern. The results presented here indicate that the optimal stent oversizing ratio must be considered to minimise the haemodynamic impact of stenting.
Assuntos
Hemodinâmica , Stents , Animais , Ovinos , Circulação Coronária/fisiologia , NeointimaRESUMO
Microbubble clustering may occur when bubbles become bound to targeted surfaces or are grouped by acoustic radiation forces in medical diagnostic applications. The ability to identify the formation of such clusters from the ultrasound echoes may be of practical use. Nonlinear numerical simulations were performed on clusters of microbubbles modeled by the modified Keller-Miksis equations. Encapsulated bubbles were considered to mimic practical applications but the aim of the study was to examine the effects of inter-bubble spacing and bubble size on the dynamical behavior of the cluster and to see if chaotic or bifurcation characteristics could be helpful in diagnostics. It was found that as microbubbles were clustered closer together, their oscillation amplitude for a given applied ultrasound power was reduced, and for inter-bubble spacing smaller than about ten bubble radii nonlinear subharmonics and ultraharmonics were eliminated. For clustered microbubbles, as for isolated microbubbles, an increase in the applied acoustic power caused bifurcations and transition to chaos. The bifurcations preceding chaotic behavior were identified by Floquet analysis and confirmed to be of the period-doubling type. It was found that as the number of microbubbles in a cluster increased, regularization occurred at lower ultrasound power and more windows of order appeared.
Assuntos
Microbolhas , Dinâmica não Linear , Ultrassom/métodos , Simulação por Computador , Movimento (Física) , Análise Numérica Assistida por Computador , Pressão , Fatores de TempoRESUMO
Hemodynamic changes in stented blood vessels play a critical role in stent-associated complications. The majority of work on the hemodynamics of stented blood vessels has focused on coronary arteries but not cerebral venous sinuses. With the emergence of endovascular electrophysiology, there is a growing interest in stenting cerebral blood vessels. We investigated the hemodynamic impact of a stent-mounted neural interface inside the cerebral venous sinus. The stent was virtually implanted into an idealized superior sagittal sinus (SSS) model. Local venous blood flow was simulated. Results showed that blood flow was altered by the stent, generating recirculation and low wall shear stress (WSS) around the device. However, the effect of the electrodes on blood flow was not prominent due to their small size. This is an early exploration of the hemodynamics of a stent-mounted neural interface. Future work will shed light on the key factors that influence blood flow and stenting outcomes.Clinical Relevance-The study investigates blood flow through a stent-based electrode array inside the cerebral venous sinus. The hemodynamic impact of the stent can provide insight into neointimal growth and thrombus formation.
Assuntos
Veias Cerebrais , Hidrodinâmica , Stents , Vasos Coronários , HemodinâmicaRESUMO
The circulation in the total cavopulmonary connection (TCPC) is a low-energy system which operation and efficiency are subjected to multiple factors. Some retrospective studies report that the abnormal narrowing of vessels in the system, i.e. stenosis, is one of the most dangerous geometric factors which can result in heart failure. In the present study, the effect of varying extracardiac conduit (ECC) stenosis on the hemodynamics in a surrogate TCPC model is investigated using high-fidelity numerical simulations. The efficiency of the surrogate TCPC model was quantified according to the power loss, relative perfusion in lungs and the percentage of conduit surface area with abnormally low and high wall shear stress for venous flow. Additionally, the impact of respiration and asymmetry in the stenosis geometry to the system was examined. The results show that the flow in the TCPC model exhibits pronounced unsteadiness even under the steady initial boundary conditions, while the uneven pulmonary flow distribution and the presence of the ECC stenosis amplify the chaotic nature of the flow. Energy efficiency of the system is shown to strongly correlate with amount of vortical structures in the model and their range of scales. Finally, the study demonstrates that the presence of respiration in the model adds to perturbations in the flow which causes increase in the power loss. Results obtained in the study provide valuable insights on how the ECC stenosis effect the flow in the surrogate TCPC model under different flow conditions.
Assuntos
Insuficiência Cardíaca , Humanos , Constrição Patológica , Estudos Retrospectivos , Simulação por Computador , PerfusãoRESUMO
Background: Blood platelets have evolved a complex mechanotransduction machinery to rapidly respond to hemodynamic conditions. A variety of microfluidic flow-based approaches have been developed to explore platelet mechanotransduction; however, these experimental models primarily focus on the effects of increased wall shear stress on platelet adhesion events and do not consider the critical effects of extensional strain on platelet activation in free flow. Objectives: We report the development and application of a hyperbolic microfluidic assay that allows for investigation of platelet mechanotransduction under quasi-homogenous extensional strain rates in the absence of surface adhesions. Methods: Using a combined computational fluid dynamic and experimental microfluidic approach, we explore 5 extensional strain regimes (geometries) and their effect on platelet calcium signal transduction. Results: We demonstrate that in the absence of canonical adhesion, receptor engagement platelets are highly sensitive to both initial increase and subsequent decrease in extensional strain rates within the range of 747 to 3319/s. Furthermore, we demonstrate that platelets rapidly respond to the rate of change in extensional strain and define a threshold of ≥7.33 × 106/s/m, with an optimal range of 9.21 × 107 to 1.32 × 108/s/m. In addition, we demonstrate a key role of both the actin-based cytoskeleton and annular microtubules in the modulation of extensional strain-mediated platelet mechanotransduction. Conclusion: This method opens a window onto a novel platelet signal transduction mechanism and may have potential diagnostic utility in the identification of patients who are prone to thromboembolic complications associated with high-grade arterial stenosis or are on mechanical circulatory support systems, for which the extensional strain rate is a predominant hemodynamic driver.
RESUMO
The sound radiated by newly formed bubbles can be used to determine their properties. However, details of the fluid dynamics driving the acoustic emission remain unclear. A neck-collapsing model has been proposed to explain the sound generation at bubble pinch-off. The model uses a forcing function which drives the Rayleigh-Plesset equation and is linked to the bubble acoustic pressure. Here, the model is tested on bubbles of diameter up to 7 mm generated in distilled water, tap water, and alcohol-water solution. The model works well for bubbles less than 2.2 mm radius but the error increases up to 71% for larger diameters.
Assuntos
Acústica , Som , Pressão , ÁguaRESUMO
Blockages within arteries, called stenoses, are a common cause of coronary artery disease (CAD). Stenosis is a result of atherosclerotic plaque build-up limits blood flow and hence oxygen and nutrient supplies. Past studies on stenosed arterial flows often assumed stenosis to be axisymmetric in shape. However, medical imaging modalities have shown that stenoses in the coronary arteries are often asymmetric. To address it, an asymmetric stenosis is considered in the model which is based on common dimensions of the left anterior descending artery (LAD). The hemodynamic impacts are studied over a range of degrees of eccentricity (DoE) and degree of stenosis (DoS). Blood flow within the artery is analyzed by solving the incompressible Navier-Stokes equations with both resting and hyperemic flow rates. The wall shear stress (WSS), oscillatory shear index (OSI) and fractional flow reserve (FFR) are calculated. The eccentricity makes the flow deflect away from the model's centerline. Behavior of the deflected flow is significantly altered downstream of the stenosis. Transverse dimension of the recirculation zone grows with increasing DoE, while its longitudinal dimension mainly depends on DoS. Eccentricity also contributes to the development of secondary flow distal to the stenosis. Such complex flow behavior contributes to a further pressure loss and hence a significant change in FFR (<0.8). Calculated WSS and OSI indicate that in actual eccentric stenotic LAD the asymmetric remodeling is anticipated. Thus, consideration of the DoE, along with the DoS, could lead to better patient stratification.
Assuntos
Estenose Coronária , Reserva Fracionada de Fluxo Miocárdico , Constrição Patológica , Estenose Coronária/diagnóstico por imagem , Vasos Coronários , Hemodinâmica/fisiologia , HumanosRESUMO
OBJECTIVES: Better tools are needed for risk assessment of Type B aortic dissection (TBAD) to determine optimal treatment for patients with uncomplicated disease. Magnetic resonance imaging (MRI) has the potential to inform computational fluid dynamics (CFD) simulations for TBAD by providing individualised quantification of haemodynamic parameters, for assessment of complication risks. This systematic review aims to present an overview of MRI applications for CFD studies of TBAD. METHODS: Following PRISMA guidelines, a search in Medline, Embase, and the Scopus Library identified 136 potentially relevant articles. Studies were included if they used MRI to inform CFD simulation in TBAD. RESULTS: There were 20 articles meeting the inclusion criteria. 19 studies used phase contrast MRI (PC-MRI) to provide data for CFD flow boundary conditions. In 12 studies, CFD haemodynamic parameter results were validated against PC-MRI. In eight studies, geometric models were developed from MR angiography. In three studies, aortic wall or intimal flap motion data were derived from PC/cine MRI. CONCLUSIONS: MRI provides complementary patient-specific information in CFD haemodynamic studies for TBAD that can be used for personalised care. MRI provides structural, dynamic and flow data to inform CFD for pre-treatment planning, potentially advancing its integration into clinical decision-making. The use of MRI to inform CFD in TBAD surgical planning is promising, however further validation and larger cohort studies are required.
Assuntos
Dissecção Aórtica , Hidrodinâmica , Humanos , Imageamento por Ressonância Magnética , Dissecção Aórtica/diagnóstico por imagem , Hemodinâmica , Imagem Cinética por Ressonância Magnética/métodos , Simulação por ComputadorRESUMO
Objective.The aim of this work was to assess vascular remodeling after the placement of an endovascular neural interface (ENI) in the superior sagittal sinus (SSS) of sheep. We also assessed the efficacy of neural recording using an ENI.Approach.The study used histological analysis to assess the composition of the foreign body response. Micro-CT images were analyzed to assess the profiles of the foreign body response and create a model of a blood vessel. Computational fluid dynamic modeling was performed on a reconstructed blood vessel to evaluate the blood flow within the vessel. Recording of brain activity in sheep was used to evaluate efficacy of neural recordings.Main results.Histological analysis showed accumulated extracellular matrix material in and around the implanted ENI. The extracellular matrix contained numerous macrophages, foreign body giant cells, and new vascular channels lined by endothelium. Image analysis of CT slices demonstrated an uneven narrowing of the SSS lumen proportional to the stent material within the blood vessel. However, the foreign body response did not occlude blood flow. The ENI was able to record epileptiform spiking activity with distinct spike morphologies.Significance. This is the first study to show high-resolution tissue profiles, the histological response to an implanted ENI and blood flow dynamic modeling based on blood vessels implanted with an ENI. The results from this study can be used to guide surgical planning and future ENI designs; stent oversizing parameters to blood vessel diameter should be considered to minimize detrimental vascular remodeling.
Assuntos
Procedimentos Endovasculares , Corpos Estranhos , Animais , Ovinos , Remodelação Vascular , Stents , Seio Sagital SuperiorRESUMO
Patient-specific coronary endothelial shear stress (ESS) calculations using Newtonian and non-Newtonian rheological models were performed to assess whether the common assumption of Newtonian blood behavior offers similar results to a more realistic but computationally expensive non-Newtonian model. 16 coronary arteries (from 16 patients) were reconstructed from optical coherence tomographic (OCT) imaging. Pulsatile CFD simulations using Newtonian and the Quemada non-Newtonian model were performed. Endothelial shear stress (ESS) and other indices were compared. Exploratory indices including local blood viscosity (LBV) were calculated from non-Newtonian simulation data. Compared to the Newtonian results, the non-Newtonian model estimates significantly higher time-averaged ESS (1.69 (IQR 1.36)Pa versus 1.28 (1.16)Pa, p < 0.001) and ESS gradient (0.90 (1.20)Pa/mm versus 0.74 (1.03)Pa/mm, p < 0.001) throughout the cardiac cycle, under-estimating the low ESS (<1Pa) area (37.20 ± 13.57% versus 50.43 ± 14.16%, 95% CI 11.28-15.18, p < 0.001). Similar results were also found in the idealized artery simulations with non-Newtonian median ESS being higher than the Newtonian median ESS (healthy segments: 0.8238Pa versus 0.6618Pa, p < 0.001 proximal; 0.8179Pa versus 0.6610Pa, p < 0.001 distal; stenotic segments: 0.8196Pa versus 0.6611Pa, p < 0.001 proximal; 0.2546Pa versus 0.2245Pa, p < 0.001 distal) On average, the non-Newtonian model has a LBV of 1.45 times above the Newtonian model with an average peak LBV of 40-fold. Non-Newtonian blood model estimates higher quantitative ESS values than the Newtonian model. Incorporation of non-Newtonian blood behavior may improve the accuracy of ESS measurements. The non-Newtonian model also allows calculation of exploratory viscosity-based hemodynamic indices, such as local blood viscosity, which may offer additional information to detect underlying atherosclerosis.