Morphological Variations of the Nasopalatine Canal in the North Cyprus Population: A Cone Beam Computed Tomography Study.

BACKGROUND This study aimed to evaluate the morphological characteristics of the anterior maxillary nasopalatine canal and the width of the buccal bone using cone-beam computed tomography (CBCT) in 150 adults in Northern Cyprus. MATERIAL AND METHODS The study included 150 participants, and their anterior maxillary morphometric measurements (eg, length of the nasopalatine canal and anteroposterior diameter of the nasal foramen) were taken using CBCT with the scanning parameters of 90 kvP, 24 s, 4 mA, voxel size 0.3 mm, and field of view 10×6 cm. The shapes of the nasopalatine canal (NPC) were categorized into 4 types: cylindrical, hourglass, funnel-shaped, and banana (54%, 20.6%, 18.6%, and 4%, respectively). RESULTS The findings showed a clear link between the shape of the NPC and the horizontal dimensions of the anterior maxilla's morphometric properties. In general, decreased horizontal bone dimensions were found in the premaxilla at the banana- and funnel-shaped type for the nasopalatine canal. Also, the anteroposterior diameter of a nasal foramen in the hourglass shape was significantly larger in diameter than all other shapes. Additionally, the morphology of the nasopalatine canal is influenced by its shape. The sagittal cross-section has shown significant correlations with the sizes of the incisive foramen, nasal foramen, and the length of the nasopalatine canal. CONCLUSIONS The study found a correlation between the shape of the NPC and the horizontal dimensions of the anterior maxilla's anatomy. The measurements of NPC in a North Cyprus population slightly differ from the established standards found in the existing literature. Conducting more extensive studies with a larger number of CBCT images will offer additional insights.

Maxillary Canine Impaction: Assessing the Influence of Maxillary Anatomy Using Cone Beam Computed Tomography.

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated. RESULTS In the palatal width measurement from the mid-root variable, the measurement of labially positioned canines was significantly lower than the control group (P<0.05). In terms of intermolar width, the labial positioned impacted canines' values were lower than in the control group. There was a significant difference in terms of the perimeter variable and both palatinally and labially positioned impacted canines were significantly lower than in the control group (P<0.05). All parameters were compared according to sex, and measurements of male patients were significantly higher than in female patients (P<0.05). CONCLUSIONS A labially impacted canine was strongly linked to a decrease in mid-root palatal and intermolar widths. Additionally, impacted canines positioned both palatally and labially were found to result in a reduced arch perimeter. Moreover, male patients with impacted canines exhibited notably greater anatomical measurements compared to female patients.

Gender-Based Variation in Alveolar Bone Thickness of Maxillary Incisor Teeth: A CBCT Retrospective Study.

BACKGROUND This retrospective study from a single center in Cyprus aimed to assess labial (buccal) and palatal bone thickness in 6 anterior maxillary teeth of 120 adults using cone-beam computed tomography (CBCT). MATERIAL AND METHODS The CBCT scans of 120 patients (720 teeth) were examined, with scanning parameters of 90 kvP, 24 s, 4 mA, voxel size 0.3 mm, and field of view of 10×6 cm. All maxillary incisors were categorized into 3 distinct points in terms of buccal (B) and palatal (P) points, with points B1 (buccal) and P1 (palatal) 4 mm below the cementoenamel junction; points B2 and P2 at the midpoint between the labial and palatal alveolar crest plane extending to the root apex; and points B3 and P3 at the root apex. Evaluation was done by measuring the distance from these points to the labial and palatal alveolar bone. RESULTS When the thicknesses were measured between all 6 points and labial and palatal bone, the thickness of point B3 of tooth 13 in men was significantly higher than that in women. At points P1, P2, and P3 for teeth 11 and 13, the palatal bone thickness of men was significantly higher than that of women. At points P2 and P3 of tooth 12, the palatal bone thickness of men was significantly higher than that of women. CONCLUSIONS The study found a correlation between alveolar bone thickness and patient sex in the North Cyprus population. Alveolar bone thickness in the anterior maxillary should be considered in implant treatment and orthodontic techniques.

Effects of N-acetyl-L-cysteine against apical periodontitis in rats with adriamycin-induced cardiomyopathy and nephropathy.

AIM: This study aimed to investigate the potential protective effects of N-acetyl-L-cysteine (NAC) against apical periodontitis (AP) in rats with adriamycin (ADR)-induced kidney and heart diseases. METHODOLOGY: Fourty-eight Wistar albino rats were divided into six groups: (1) Control group, (2) ADR group (1 mg/kg/day ip for 10 days), (3) AP Group (1st mandibular molar tooth), (4) AP + ADR Group, (5) AP + NAC group (150 mg/kg/day ip), and (6) AP + ADR + NAC group. After 3 weeks, the rats were decapitated and blood and tissue samples (heart, kidney, and jaw) were collected. Tissue samples were evaluated by biochemical (inflammatory cytokines and hemodynamic parameters) and radiological analyses. One-way anova with Tukey post hoc tests was used to compare data, considering p < .05 as statistically significant. RESULTS: The serum levels of TNF-α, IL-1ß, BUN, Creatinine, CK, and LDH were elevated in the test groups compared with the control group, and treatment with NAC reduced these levels (p < .05). Heart and kidney tissue analysis showed a higher heart-to-body weight ratio (HW/BW) and kidney-to-body weight ratio (KW/BW) in the test groups compared with the control group (p < .05). No significant differences in HW/BW and KW/BW were found between the control and AP + NAC groups. Volumetric apical bone resorption analysis showed an increase in periapical radiolucencies in AP-induced groups indicating apical periodontitis. NAC treatment reduced the total area and volume of resorption cavities (p < .05). CONCLUSIONS: The results suggest that NAC's antioxidant and anti-inflammatory effects can reduce adriamycin-mediated heart and kidney damage and may have a positive effect on apical periodontitis in individuals with nephropathy and cardiomyopathy.

Variations and thicknesses of anterior belly of the digastric muscle: an ultrasonographic study.

PURPOSE: This study aims to evaluate the anatomy and anatomical variations of the anterior belly of the digastric muscle. METHODS: Hundred and fifty one ultrasonographic images of the digastric muscle pairs were evaluated in Near East University Faculty of Dentistry Department of Dentomaxillofacial Radiology. Morphological variations were recorded using the classification of the digastric muscle into 12 types by Kim et al. For the analysis, the Mann-Whitney U test and Chi-square test were used, and for the correlational analysis, Spearman's rho test was applied. P < 0.05 was considered statistically significant in all tests. RESULTS: Seventy female and 81 male patients aged 19-60 years were evaluated. Type 1 digastric muscle was observed in 145 of 151 patients, Type 2 in 3 patients, and Type 7 in 3 patients. The thicknesses of the right and left digastric muscles were measured, and a statistically significant difference was observed between the groups when the genders were compared. It was observed that both right and left digastric muscle thicknesses were higher in males than females. There was a statistically significant positive high correlation between right and left digastric muscle thicknesses (p = 0.000; r = 0.736). No statistically significant difference was found between genders (p = 0.596) in terms of anatomical variations. CONCLUSION: Considering that the variations of the digastric muscle may have a clinical significance role, the normal anatomy and variations of this muscle should be well known by maxillofacial surgeons and radiologists.

Second mesiobuccal canal segmentation with YOLOv5 architecture using cone beam computed tomography images.

The objective of this study is to use a deep-learning model based on CNN architecture to detect the second mesiobuccal (MB2) canals, which are seen as a variation in maxillary molars root canals. In the current study, 922 axial sections from 153 patients' cone beam computed tomography (CBCT) images were used. The segmentation method was employed to identify the MB2 canals in maxillary molars that had not previously had endodontic treatment. Labeled images were divided into training (80%), validation (10%) and testing (10%) groups. The artificial intelligence (AI) model was trained using the You Only Look Once v5 (YOLOv5x) architecture with 500 epochs and a learning rate of 0.01. Confusion matrix and receiver-operating characteristic (ROC) analysis were used in the statistical evaluation of the results. The sensitivity of the MB2 canal segmentation model was 0.92, the precision was 0.83, and the F1 score value was 0.87. The area under the curve (AUC) in the ROC graph of the model was 0.84. The mAP value at 0.5 inter-over union (IoU) was found as 0.88. The deep-learning algorithm used showed a high success in the detection of the MB2 canal. The success of the endodontic treatment can be increased and clinicians' time can be preserved using the newly created artificial intelligence-based models to identify variations in root canal anatomy before the treatment.

In vitro caries-preventive effect of a mineralization-promoting peptide combined with fluoride gel on sound primary teeth.

BACKGROUND: Mineralization-promoting peptide-3 (MPP3) is a new biomimetic remineralization agent. AIM: To assess the remineralization efficiency of MPP3, either alone or in combination with fluoride gel. DESIGN: The samples were divided into four groups: control, 1.23% fluoride gel, 10% MPP3 gel, and 1.23% fluoride gel + 10% MPP3. Following the application of remineralization agents (4 min), the samples remained in a pH-cycling model (37°C, 4 weeks). Microhardness, microcomputed tomography (micro-CT), polarized light microscopy (PLM), and field emission scanning electron microscopy (FE-SEM) analysis were conducted. RM-ANOVA, one-way ANOVA, and intraclass correlation coefficient (ICC) were used for statistical analysis, and a significance level of p < .05 was employed. RESULTS: Mineralization-promoting peptide 3 and fluoride gel + MPP3 increased the microhardness of the enamel compared with initial values in each group (p < .05). Mineralization-promoting peptide 3 successfully maintained the mineral density of enamel, although the cariogenic pH-cycling and PLM results indicated that the lesion depth (µm) was significantly lower in the fluoride gel + MPP3 group (27.0336 ± 12.53650) than in the control group (37.3907 ± 12.76002, p < .05). CONCLUSION: The combined use of MPP3 with fluoride gel enhanced the caries-protective and mineralization-promoting effects of fluoride. Mineralization-promoting peptide 3 may be a potential agent that can be employed to improve the physical properties of enamel.

Automatic Deep Learning Detection of Overhanging Restorations in Bitewing Radiographs.

OBJECTIVE: This study aimed to assess the effectiveness of deep convolutional neural network (CNN) algorithms in detecting and segmentation of overhanging dental restorations in bitewing radiographs. METHOD AND MATERIALS: A total of 1160 anonymized bitewing radiographs were used to progress the Artificial Intelligence (AI) system) for the detection and segmentation of overhanging restorations. The data was then divided into three groups: 80% for training (930 images, 2399 labels), 10% for validation (115 images, 273 labels), and 10% for testing (115 images, 306 labels). A CNN model known as you only look once (YOLOv5) was trained to detect overhanging restorations in bitewing radiographs. After utilizing the remaining 115 radiographs to evaluate the efficacy of the proposed CNN model, the accuracy, sensitivity, precision, F1 score, and area under the receiver operating characteristic curve (AUC) were computed. RESULTS: The model demonstrated a precision of 90.9%, a sensitivity of 85.3%, and an F1 score of 88.0%. Furthermore, the model achieved an AUC of 0.859 on the Receiver Operating Characteristic (ROC) curve. The mean average precision (mAP) at an intersection over a union (IoU) threshold of 0.5 was notably high at 0.87. CONCLUSION: The findings suggest that deep CNN algorithms are highly effective in the detection and diagnosis of overhanging dental restorations in bitewing radiographs. The high levels of precision, sensitivity, and F1 score, along with the significant AUC and mAP values, underscore the potential of these advanced deep learning techniques in revolutionizing dental diagnostic procedures.

Artificial intelligence system for automatic maxillary sinus segmentation on cone beam computed tomography images.

OBJECTIVES: The study aims to develop an artificial intelligence (AI) model based on nnU-Net v2 for automatic maxillary sinus (MS) segmentation in cone beam computed tomography (CBCT) volumes and to evaluate the performance of this model. METHODS: In 101 CBCT scans, MS were annotated using the CranioCatch labelling software (Eskisehir, Turkey) The dataset was divided into 3 parts: 80 CBCT scans for training the model, 11 CBCT scans for model validation, and 10 CBCT scans for testing the model. The model training was conducted using the nnU-Net v2 deep learning model with a learning rate of 0.00001 for 1000 epochs. The performance of the model to automatically segment the MS on CBCT scans was assessed by several parameters, including F1-score, accuracy, sensitivity, precision, area under curve (AUC), Dice coefficient (DC), 95% Hausdorff distance (95% HD), and Intersection over Union (IoU) values. RESULTS: F1-score, accuracy, sensitivity, precision values were found to be 0.96, 0.99, 0.96, 0.96, respectively for the successful segmentation of maxillary sinus in CBCT images. AUC, DC, 95% HD, IoU values were 0.97, 0.96, 1.19, 0.93, respectively. CONCLUSIONS: Models based on nnU-Net v2 demonstrate the ability to segment the MS autonomously and accurately in CBCT images.

The utilization of decision trees on orthopantomographic and lateral panoramic graphs for the diagnosis of unilateral anterior disc displacement of the temporomandibular joint.

BACKGROUND: Investigation is to utilize decision trees in conjunction with orthopantomography (OPT) and lateral panoramic graphy (LPG) to diagnose unilateral anterior disc displacement (ADD) of the temporomandibular joint. METHODS: In this study, 161 patients with images obtained through all three imaging methods, MRI, OPT, and LPG, were selected from the archives. The participants were categorized into two groups: the study group, comprising 89 patients with unilateral anterior disc displacement, and the control group, consisting of 72 healthy individuals. Measurements, including 2 angles (antero-posterior angle and superior-inferior angle) and 3 distance parameters (anterior joint space distance, superior joint space distance, and posterior joint space distance), were conducted on each imaging modality dataset. To assess the obtained measurement data within each patient, the differences from each measurement were calculated. Statistical analysis of the measurement differences between the control and study groups was carried out with independent t test, and decision trees were generated using the SPSS 25 decision tree module 5.0. RESULTS: In ADD patients, it was statistically significantly found that the APA increased while the SIA decreased for angle measurements. But for linear measurements, AS increased while the SS and PS decreased in MRI, OPT, and LPG. CONCLUSION: ADD can be diagnosed in OPT and LPG. The identification of the specific type of ADD that occurs in the temporomandibular joint is not feasible.

Investigation of the relationship between the mandibular third molar teeth and the inferior alveolar nerve using posteroanterior radiographs: a pilot study.

BACKGROUND: The most severe complication that can occur after mandibular third molar (MM3) surgery is inferior alveolar nerve (IAN) damage. It is crucial to have a comprehensive radiographic evaluation to reduce the possibility of nerve damage. The objective of this study is to assess the diagnostic accuracy of panoramic radiographs (PR) and posteroanterior (PA) radiographs in identifying the association between impacted MM3 roots and IAN. METHODS: This study included individuals who had PR, PA radiographs, and cone beam computed tomography (CBCT) and who had at least one impacted MM3. A total of 141 impacted MM3s were evaluated on CBCT images, and the findings were considered gold standard. The relationship between impacted MM3 roots and IAN was also evaluated on PR and PA radiographies. The data was analyzed using the McNemar and Chi-squared tests. The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and diagnostic accuracy of PR and PA radiographies were determined. RESULTS: Considering CBCT the gold standard, the relationship between MM3 roots and IAN was found to be statistically significant between PR and CBCT (p = 0.00). However, there was no statistically significant relationship between PA radiography and CBCT (0.227). The study revealed that the most prevalent limitation of the PR in assessing the relationship between MM3 roots and IAN was the identification of false-positive relationship. CONCLUSIONS: PA radiography may be a good alternative in developing countries to find out if there is a contact between MM3 roots and IAN because it is easier to get to, cheaper, and uses less radiation.

Marginal adaptation of bulk-fill resin composites with different viscosities in class II restorations: a micro-CT evaluation.

BACKGROUND: The purpose of this study is to evaluate the marginal adaptation of bulk-fill resin composites with different viscosities (paste-like and flowable) in Class II restorations using micro-CT imaging. METHODS: Forty extracted human molars were used. Mesial and distal Class II box cavities (approximately 3 mm x 3 mm x 4 mm) were prepared for each tooth, with cavity floors located 1 mm below the enamel-cementum junction. Following adhesive application, teeth were restored using eight different groups: Group XB: X-tra Base Bulk-fill Flowable (VOCO), Group XF: X-tra Fill Bulk-fill (VOCO), Group FB: Filtek Bulk-fill Posterior (3 M ESPE), Group FF: Filtek Bulk-fill Flowable (3 M ESPE), Group BB: Beautifil-Bulk (SHOFU), Group BF: Beautifil-Bulk Flowable (SHOFU), and Group CO: "as a control group", Clearfil Majesty Posterior (KURARAY) and Group CF: "as a control group", Clearfil Majesty Flow + Clearfil Majesty Posterior (KURARAY). The restored teeth underwent an aging protocol involving 1000 cycles in a water bath fluctuating between 5 ± 1.0 °C and 55 ± 1.0 °C. Post-aging, teeth were immersed in 50% silver nitrate solution for 24 h and then in a film developer solution for 8 h. Microleakage analysis was performed using micro-CT, evaluated with 3D Slicer software. A two-way ANOVA was employed for statistical analysis. RESULTS: Two-way ANOVA results indicated significant effects of both viscosity (p < 0.0001) and composite type (p < 0.0001) on marginal adaptation. Viscosity analysis (comparing flowable and paste-like) revealed no significant differences in the FB-FF, XB-XF and BB-BF groups but significant differences in the and CO-CF group, with flowable type exhibiting less microleakage than paste-like type. CONCLUSIONS: The study suggests that while the viscosity of bulk-fill composites did not significantly affect marginal adaptation, the brand of bulk-fill composite did influence it.

Detection of periodontal bone loss patterns and furcation defects from panoramic radiographs using deep learning algorithm: a retrospective study.

BACKGROUND: This retrospective study aimed to develop a deep learning algorithm for the interpretation of panoramic radiographs and to examine the performance of this algorithm in the detection of periodontal bone losses and bone loss patterns. METHODS: A total of 1121 panoramic radiographs were used in this study. Bone losses in the maxilla and mandibula (total alveolar bone loss) (n = 2251), interdental bone losses (n = 25303), and furcation defects (n = 2815) were labeled using the segmentation method. In addition, interdental bone losses were divided into horizontal (n = 21839) and vertical (n = 3464) bone losses according to the defect patterns. A Convolutional Neural Network (CNN)-based artificial intelligence (AI) system was developed using U-Net architecture. The performance of the deep learning algorithm was statistically evaluated by the confusion matrix and ROC curve analysis. RESULTS: The system showed the highest diagnostic performance in the detection of total alveolar bone losses (AUC = 0.951) and the lowest in the detection of vertical bone losses (AUC = 0.733). The sensitivity, precision, F1 score, accuracy, and AUC values were found as 1, 0.995, 0.997, 0.994, 0.951 for total alveolar bone loss; found as 0.947, 0.939, 0.943, 0.892, 0.910 for horizontal bone losses; found as 0.558, 0.846, 0.673, 0.506, 0.733 for vertical bone losses and found as 0.892, 0.933, 0.912, 0.837, 0.868 for furcation defects (respectively). CONCLUSIONS: AI systems offer promising results in determining periodontal bone loss patterns and furcation defects from dental radiographs. This suggests that CNN algorithms can also be used to provide more detailed information such as automatic determination of periodontal disease severity and treatment planning in various dental radiographs.

Relationships between Interleukin 18 -607 C/A and -137 G/C, Osteopontin -9250 C/T Genetic Polymorphisms and Systemic Inflammatory Response Syndrome in Coronary Artery Bypass Graft Surgery.

Background and Objectives: Systemic inflammatory response syndrome (SIRS) is one of the most significant complications after on-pump heart surgery procedures. High cytokine levels have been shown after open-heart surgeries and a genetic predisposition seems to be an important underlying modulatory characteristic for SIRS. To investigate the association between interleukin 18 -607 C/A, interleukin 18 -137 G/C and osteopontin 9250 C/T genetic polymorphisms and SIRS in on-pump CABG patients. Materials and Methods: Two hundred consecutive elective on-pump CABG patients were recruited prospectively to the study. Genomic DNA was extracted from whole blood and genotyping was determined by sequence specific PCR or PCR-RFLP methods for related polymorphisms. Results: SIRS incidence was 60.2%, 38.1%, 18.9% on postoperative day 1, 2 and 3, respectively, in the whole study population. The SIRS rate on the second postoperative day was 13% and 43.4%, respectively, in osteopontin 9250 C/T T allele non-carriers and carriers (p = 0.004). WBC (White Blood Cell) counts were higher on day 2 and 3 in osteopontin 9250 C/T T allele carriers compared to non-carriers (day 2; 12.7 ± 4 vs. 10.5 ± 2.4 (p = 0.015), day 3; 11.8 ± 4 vs. 9.1 ± 4.7 (p = 0.035)). The average ICU stay was 3.1 ± 7.4, 1.28 ± 0.97 for IL 18-137 G/C C allele carriers and non-carriers, respectively (p = 0.003), and in the IL 18-137 G/C C allele carriers, SIRS developed in 42.2% by the second postoperative day whereas the rate was 57.8% in non-carriers (p = 0.025). Conclusions: The current research revealed a possible link between osteopontin 9250 C/T and IL18-137 G/C genetic polymorphism and SIRS and morbidity in on-pump CABG patients.

The Effect of Gravity on Marginal Integrity of Different Flowable Bulk-Fill Resin Composites.

Background and Objectives: The aim of this quantitative research was to investigate the effect of gravitational forces on the marginal integrity of different bulk-fill composites by micro-CT imaging. Materials and Methods: Fifty caries-free human third molars extracted for prophylactic purposes were used in this study. Each tooth was prepared with two proximal box cavities, with dimensions of 3 mm × 3 mm × 5 mm. Five distinct groups, each comprising 20 cavities, thus totaling 100 cavities for this study: (1, Group CON): Clearfil Majesty Flow + Clearfil Majesty Esthetic (as the control); (2, Group FBR): Filtek Bulk-fill Flowable Restorative + Clearfil Majesty Esthetic; (3, Group XTB): Voco Extrabase + Clearfil Majesty Esthetic; (4, Group SDR): SDR + Clearfil Majesty Esthetic; and (5, Group SNC): Sonicfill. When restoring the mesial cavities, the occlusal surfaces of the teeth in the mold were positioned upwards, counteracting the force of gravity. In contrast, for the restoration of the distal cavities, the occlusal surfaces were aligned downwards, to be parallel with the gravitational pull. After restorative procedures, each tooth was treated with 5000 thermal cycles. A solution of ammoniacal silver nitrate (AgNO3) was employed as a tracing agent. The micro-CT scans were conducted and the total volume of silver nitrate and the total volume of restorations within the relevant region of interest were calculated in "mm3" with software. Two-way ANOVA and Tukey tests were performed at a significance level of p = 0.05 with Graphpad Prism v 8.2.1 software. Results: Both gravity effect and interaction showed no statistical differences (p > 0.05). Statistically significant differences were observed in the restorative materials (p < 0.05). Conclusions: Gravitational forces do not emerge as a major factor affecting the marginal integrity of flowable bulk-fill composites in class II restorations. The chemical composition of the composites plays a more crucial role, with the XTB composite showing higher microleakage ratios compared to the others.

The micro CT evaluation of crown and root pulp volume versus dentin thickness in teeth in postmortem interval (PMI).

Determining the postmortem interval (PMI) is one of the main study subjects of forensic sciences. The main purpose of this prospective in vitro study that was the Micro-CT evaluation of teeth crown and root pulp volume versus dentin thickness in terms of PMI determination. The study involved 60 female Wistar rats, with weights ranging from 270 to 320 g. These rats were grouped into six different post-mortem period categories. Following the animals' sacrifice, they were subjected to a natural putrefaction period, with a control group, in the grounds of a sheltered garden. Hemi-mandible samples were then extracted and placed in glass tubes for Micro-CT evaluations, following the progression of putrefaction processes. The pulp volume and dentin thickness were assessed using Micro-CT, and the gathered data underwent statistical analysis. Micro-CT was employed to analyze sixty right mandibular second molar teeth in the hemi-mandible. The crown pulp volume exhibited a reduction in group 6, with a value of 0.239 mm3 after a three-month period of natural putrefaction (p < 0.001). There is statistically differences among groups in case of pairwise comparison (p < 0.05). However, the root pulp volume and dentin thickness variables did not display any statistically significant changes. Despite certain limitations associated with this study, the Micro-CT findings concerning teeth pulp volume can serve as an objective parameter, especially for late postmortem investigations and the estimation of time of death.

Analysing the effect of sodium bicarbonate and glycine air polishing on tooth surfaces with two different imaging methods.

The aim of this study was to compare two different imaging methods by assessing changes caused by sodium bicarbonate and glycine air polishing on the tooth surfaces. Fourteen single root teeth with exposed root surfaces were included into the study. The teeth were randomly divided into two groups: sodium bicarbonate and glycine group. Samples were scanned in a micro-computed tomography (micro-CT) and CAD/CAM (computer-aided design/computer-aided manufacturing) at baseline and then after air-polishing powder applications, the defect volume values were evaluated. There was a statistically significant difference between mean defect volume values that occurred after glycine and sodium bicarbonate air polishing evaluated with micro-CT and CAD/CAM (p < 0.05). After sodium bicarbonate air polishing, defect volume on enamel surface at maximum power and defect volume on the exposed root surface at medium power values calculated with CAD/CAM were higher. After glycine air polishing, defect volume values on both surfaces at medium power setting calculated with CAD/CAM were lower. Defect volume values on enamel surface at maximum power setting calculated with CAD/CAM were higher than calculated with micro-CT. We concluded that CAD/CAM cannot provide as accurate results as micro-CT. Glycine-based powder is less abrasive than sodium bicarbonate, especially on enamel surface. Lay Description: Micro-CT is a non-destructive imaging method with high resolution and allows to examine all tooth structures individually. CAD/CAM are systems that are widely used in dentistry today. Access to the device is easier than micro-CT. Intraoral scanners in CAD/CAM systems also provide non-destructive image scanning. The aim of this study was to compare two different imaging methods by assessing changes caused by sodium bicarbonate and glycine air polishing on the tooth surfaces. The results showed that because of the analyses made with CAD/CAM, similar results could not be obtained with micro-CT and cannot be used to evaluate the changes that occur after air polishing.

Association of accessory sphenoidal septum with protrusions of sphenoid sinus.

PURPOSE: Accessory sphenoidal septum (ASS) is a septal variation that exists in addition to the primary septum of the sphenoid sinus and can be found in or near anatomically essential structures. This study aimed to investigate the relationships between protrusions of vital structures around the sphenoid sinus and the ASSs. METHODS: This cross-sectional retrospective study is based on the analysis of CBCT scans of 314 patients in axial, coronal, and sagittal planes with 0.2-0.3 slice thicknesses. Optic nerve (ON), internal carotid artery (ICA), both ON and ICA, maxillary nerve (MN), vidian canal (VN) and ASSs were detected, and the relationship between protrusions of these vital anatomical structures and ASS was evaluated. RESULTS: Statistically significant relationship was observed between the right Type 1 ON protrusion (p < 0.05) and left Type 1 ON protrusion (p = 0.001); left Type 3 ON protrusion (p < 0.05); right Type 4 ON protrusion (p < 0.05) and ASS. Statistically significant relationship was also observed between the right ICA protrusion and ASS (p < 0.05). The right Type 1 VN protrusion (p = 0.001); left Type 2 VN protrusion (p < 0.001); right and left Type 3 VN protrusions (p < 0.001) were found to be significantly associated with the ASS. CONCLUSIONS: ASSs have significant associations with some protrusions, and they tend to cause potentially severe complications in endoscopic sinus surgery. This variability requires a comprehensive understanding of regional sphenoid sinus anatomy with detailed three-dimensional tomographic imaging.

Long-term evaluation of masseter muscle activity, dimensions, and elasticity after orthognathic surgery in skeletal class III patients.

OBJECTIVE: To evaluate changes in the masseter muscle after orthognathic surgery using electromyography (EMG), ultrasonography (US), and ultrasound elastography (USE) in individuals with skeletal class III anomaly over long-term follow-up and compare with a control group. MATERIALS AND METHODS: The study group included 29 patients with class III dentofacial deformities scheduled to undergo orthodontic treatment and orthognathic surgery. The control group included 20 individuals with dental class I occlusion. Assessment of the masseter muscles using EMG, US, and USE was performed before orthognathic surgery (T1) and at postoperative 3 months (T2) and 1 year (T3) in the study group, and at a single time point in the control group. All assessments were performed at rest and during maximum clenching. Masseter muscle activity, dimension, and hardness were analyzed. RESULTS: Electromyographic activity of the masseter muscle during maximum clenching was increased at postoperative 1 year but did not reach control group values. On ultrasonography, the masseter muscle showed minimal changes in dimension at postoperative 1 year compared to preoperative values and remained below control group values. The postoperative increase in masseter muscle hardness at rest and during maximum clenching persisted at postoperative 1 year. CONCLUSION: The results of this study suggest that after orthognathic surgery, additional interventions and much longer follow-up are needed to ensure better muscle adaptation to the new occlusion and skeletal morphology. CLINICAL RELEVANCE: All assessment methods are useful for comprehensively evaluating changes in the masticatory muscles after orthognathic surgery.

Retrospective evaluation of the morpometric and morphological anatomy of the occipital condyle, hypoglossal canal and foramen magnum in Turkish populaton with CBCT.

PURPOSE: The aim of this study is to morphometrically and morphologically examine the occipital condyle, which is an important anatomical region in terms of surgery and forensic medicine, and its surrounding structures, to evaluate the change in mean values according to gender and age, and to evaluate the correlation of the measurements obtained. METHODS: 180 (90 men, 90 women) CBCT images selected from the archive of Ankara University Faculty of Dentistry. Occipital Condyle length and width, Hypoglossal Canal-Basion distance, Hypoglossal Canal-Opistion distance, Hypoglossal Canal-Occipital Condyle anterior and posterior border distance, Occipital Condyle thickness, Hypoglossal Canal length, the widest diameter of Hypoglossal Canal, the narrowest diameter of the Hypoglossal Canal, the length of the Jugular Tubercle, the width of the Jugular Tubercle, the anterior intercondylar distance, the posterior intercondylar distance, and the Foramen Magnum index were measured. At the same time, the presence of septum or spicule in the hypoglossal canal and protrusion of the occipital condyle were evaluated. The relationship of age, gender, anterior and posterior intercondylar distance, and foramen magnum index measurements with all measurements were examined. RESULTS: In our study, all measurements were repeated 1 month after the first measurements to evaluate the intra-observer agreement, and the agreement between the obtained measurements and the first measurements was evaluated by calculating the intraclass correlation coefficient and 95% confidence intervals. Men's measurements were found to be significantly higher than women's measurements. When the coefficients of concordance in all measurements were examined, it was observed that there was a perfect concordance. CONCLUSION: When the results of the study are evaluated, it is seen that the values ​​obtained are generally close to the studies related to CT. Considering this, an idea can be gained as to whether CBCT, which has a lower dose and less cost, can be used as an alternative to CT in studies to be conducted with more comprehensive and different methods in skull base surgical planning.