RESUMO
Thermal control at small scales is critical for studying temperature-dependent biological systems and microfluidic processes. Concerning this, optical trapping provides a contactless method to remotely study microsized heating sources. This work introduces a birefringent luminescent microparticle of NaLuF4:Nd3+ as a local heater in a liquid system. When optically trapped with a circularly polarized laser beam, the microparticle rotates and heating is induced through multiphonon relaxation of the Nd3+ ions. The temperature increment in the surrounding medium is investigated, reaching a maximum heating of ≈5 °C within a 30 µm radius around the static particle under 51 mW laser excitation at 790 nm. Surprisingly, this study reveals that the particle's rotation minimally affects the temperature distribution, contrary to the intuitive expectation of liquid stirring. The influence of the microparticle rotation on the reduction of heating transfer is analyzed. Numerical simulations confirm that the thermal distribution remains consistent regardless of spinning. Instead, the orientation-dependence of the luminescence process emerges as a key factor responsible for the reduction in heating. The anisotropy in particle absorption and the lag between the orientation of the particle and the laser polarization angle contribute to this effect. Therefore, caution must be exercised when employing spinning polarization-dependent luminescent particles for microscale thermal analysis using rotation dynamics.
RESUMO
Thermal control of liquids with high (micrometric) spatial resolution is required for advanced research such as single molecule/cell studies (where temperature is a key factor) or for the development of advanced microfluidic devices (based on the creation of thermal gradients at the microscale). Local and remote heating of liquids is easily achieved by focusing a laser beam with wavelength adjusted to absorption bands of the liquid medium or of the embedded colloidal absorbers. The opposite effect, that is highly localized cooling, is much more difficult to achieve. It requires the use of a refrigerating micro-/nanoparticle which should overcome the intrinsic liquid heating. Remote monitoring of such localized cooling, typically of a few degrees, is even more challenging. In this work, a solution to both problems is provided. Remote cooling in D2 O is achieved via anti-Stokes emission by using an optically driven ytterbium-doped NaYF4 microparticle. Simultaneously, the magnitude of cooling is determined by mechanical thermometry based on the analysis of the spinning dynamics of the same NaYF4 microparticle. The angular deceleration of the NaYF4 particle, caused by the cooling-induced increase of medium viscosity, reveals liquid refrigeration by over -6 K below ambient conditions.
RESUMO
The experimental determination of the velocity of a colloidal nanoparticle (vNP) has recently became a hot topic. The thermal dependence of vNP is still left to be explored although it is a valuable source of information allowing, for instance, the discernment between ballistic and diffusive regimes. Optical tweezers (OTs) constitute a tool especially useful for the experimental determination of vNP although they have only been capable of determining it at room temperature. In this work, we demonstrate that it is possible to determine the temperature dependence of the diffusive velocity of a single colloidal nanoparticle by analyzing the temperature dependence of optical forces. The comparison between experimental results and theoretical predictions allowed us to discover the impact that the anomalous temperature dependence of water properties has on the dynamics of colloidal nanoparticles in this temperature range.
RESUMO
Near-infrared-light-mediated optical tweezing of individual upconverting particles has enabled all-optical single-cell studies, such as intracellular thermal sensing and minimally invasive cytoplasm investigations. Furthermore, the intrinsic optical birefringence of upconverting particles renders them light-driven luminescent spinners with a yet unexplored potential in biomedicine. In this work, the use of upconverting spinners is showcased for the accurate and specific detection of single-cell and single-bacteria attachment events, through real-time monitoring of the spinners rotation velocity of the spinner. The physical mechanisms linking single-attachment to the angular deceleration of upconverting spinners are discussed in detail. Concomitantly, the upconversion emission generated by the spinner is harnessed for simultaneous thermal sensing and thermal control during the attachment event. Results here included demonstrate the potential of upconverting particles for the development of fast, high-sensitivity, and cost-effective systems for single-cell biodetection.
Assuntos
Nanopartículas/química , Análise de Célula Única , Bactérias/isolamento & purificação , Candida albicans/citologia , Adesão Celular , Hafnia/citologia , Lasers , Luminescência , Nanopartículas/ultraestrutura , Pinças Ópticas , RotaçãoRESUMO
Anisotropic hybrid nanostructures stand out as promising therapeutic agents in photothermal conversion-based treatments. Accordingly, understanding local heat generation mediated by light-to-heat conversion of absorbing multicomponent nanoparticles at the single-particle level has forthwith become a subject of broad and current interest. Nonetheless, evaluating reliable temperature profiles around a single trapped nanoparticle is challenging from all of the experimental, computational, and fundamental viewpoints. Committed to filling this gap, the heat generation of an anisotropic hybrid nanostructure is explored by means of two different experimental approaches from which the local temperature is measured in a direct or indirect way, all in the context of hot Brownian motion theory. The results were compared with analytical results supported by the numerical computation of the wavelength-dependent absorption efficiencies in the discrete dipole approximation for scattering calculations, which has been extended to inhomogeneous nanostructures. Overall, we provide a consistent and comprehensive view of the heat generation in optical traps of highly absorbing particles from the viewpoint of the hot Brownian motion theory.
RESUMO
Since Ashkin's pioneering work, optical tweezers have become an essential tool to immobilize and manipulate microscale and nanoscale objects. The use of optical tweezers is key for a variety of applications, including single-molecule spectroscopy, colloidal dynamics, tailored particle assembly, protein isolation, high-resolution surface studies, controlled investigation of biological processes, and surface-enhanced spectroscopy. In recent years, optical trapping of individual sub-100-nm objects has got the attention of the scientific community. In particular, the three-dimensional manipulation of single lanthanide-doped luminescent nanoparticles is of great interest due to the sensitivity of their luminescent properties to environmental conditions. Nevertheless, it is really challenging to trap and manipulate single lanthanide-doped nanoparticles due to the weak optical forces achieved with conventional optical trapping strategies. This limitation is caused, firstly, by the diffraction limit in the focusing of the trapping light and, secondly, by the Brownian motion of the trapped object. In this work, we summarize recent experimental approaches to increase the optical forces in the manipulation of lanthanide-doped nanoparticles, focusing our attention on their surface modification and providing a critical review of the state of the art and future prospects.